Description Ordering
C0412 450mm Natural Gooseneck Microphone Extension

450mm Natural Gooseneck Microphone Extension

C0412

Microphone gooseneck incorporating 5/8" thread male to female. Matching bench mount bases C 0420/21. 450mm Chrome.
C0410 330mm Natural Gooseneck Microphone Extension

330mm Natural Gooseneck Microphone Extension

C0410

Microphone gooseneck incorporating 5/8" thread male to female. Matching bench mount bases C 0420/21. 300mm Chrome.
C0405 Spring Loaded Microphone Holder

Spring Loaded Microphone Holder

C0405

Spring loaded mic holder, uses 5/8" thread to enable direct fitting to most mic stands and goosenecks.
C0404 Large Wireless Microphone Holder

Large Wireless Microphone Holder

C0404 ROHS

Designed to suit large radio mics. Uses standard 5/8" thread to enable direct fitting to most mic stands and goosenecks. Features flexible plastic to allow the accommodation of a variety of microphone sizes.
C0402 22mm Flexible Microphone Holder

22mm Flexible Microphone Holder

C0402

Designed to suit narrow bodied hard wired mics. Uses standard 5/8" thread to enable direct fitting to most mic stands and goosenecks. Features flexible plastic to allow the accommodation of a variety of microphone sizes.
C0400 3 Microphone Holder Crossbar

3 Microphone Holder Crossbar

C0400

Enables 3 microphones to be mounted on a single mic stand. Simply screws on to the 5/8” thread then the mic holders screw to the crossbar.
C0398 Lapel Condenser Microphone

Lapel Condenser Microphone

C0398

A miniature electret lapel microphone with integral clip. Supplied with a balanced lead with mini 3 pin XLR plug. Features excellent pickup characteristics, dynamic range and requires phantom power (see C 0358). Perfect for lecturers, spruikers, presente
C0383 Drop-Proof 600 Ohm Handheld Microphone

Drop-Proof 600 Ohm Handheld Microphone

C0383 ROHS

This balanced microphone has a specially designed grill that can withstand a drop impact without losing its shape. The tough zinc diecast housing has an inbuilt 3 pin XLR male connector and on/off switch. It is supplied complete with 5m twin shielded bala
C0379 5 Pin XLR Desk Paging Microphone

5 Pin XLR Desk Paging Microphone

C0379

This desk microphone has a tapered low frequency response for articulate speech reproduction and enhanced clarity. Fitted with a 2 metre lead and terminated with 5 pin XLR connector. Includes a PTT mute switching pair.
C0377 3 Pin XLR Desk Paging Microphone

3 Pin XLR Desk Paging Microphone

C0377

This desk microphone has a tapered low frequency response for articulate speech reproduction and enhanced clarity. Fitted with a 2 metre lead and terminated with either a 3 pin XLR, 5 pin XLR or 5 pin DIN connector. The 5 pin XLR and 5 pin DIN type conn
C0375 Desk Paging Microphone PTT/PTL

Desk Paging Microphone PTT/PTL

C0375

An elegant, stylish, slimline unobtrusive desk-mount paging microphone equipped with a 3 pin balanced XLR lead. Features switchable flat or rolloff response to eliminate low frequency pickup. May also be switched to operate as push to talk or push to lock
C0373 Dynamic Lectern Microphone

Dynamic Lectern Microphone

C0373

This microphone features outstanding speech intelligibility, feedback rejection and user sound insolation. Complete with flexible gooseneck and built in 3 pin male XLR connector, this is ideal for lecterns, custom paging consoles, church pulpits and some
C0370 Lectern Dynamic Low Impedance Microphone

Lectern Dynamic Low Impedance Microphone

C0370

This microphone features speech tailored frequency response with excellent noise isolation and feedback rejection. Complete with flexible gooseneck and built in 3 pin male XLR connector, this is ideal for lecterns, custom paging consoles, church pulpits a
C0369 Redback Phantom Powered Lectern Microphone

Redback Phantom Powered Lectern Microphone

C0369 ROHS

This elegant gooseneck microphone features smooth, brilliant sound with excellent ambient noise control and feedback rejection. It is ideal for installations requiring the use of a high performance non-obtrusive microphone. The slimline design of this mic
C0363 Dynamic Screw Mount Gooseneck Microphone

Dynamic Screw Mount Gooseneck Microphone

C0363

This elegant gooseneck microphone features smooth, brilliant sound with excellent ambient noise control and feedback rejection. It's screw base is suitable for mounting on equipment or permanent desk mounting . The slimline design of this mic makes it id
C0361 Electret Shotgun Microphone

Electret Shotgun Microphone

C0361

This shotgun mic is designed to plug directly into a desk mount XLR socket. The line + gradient pattern provides an extremely tight unidirectional pickup and high rejection of back & side signals. It features a section of flexible gooseneck for angle adju
C0358 Phantom Power Supply with Mini XLR

Phantom Power Supply with Mini XLR

C0358

Powered by 1 AA battery, this module provides phantom power for mics equipped with a 3 pin mini XLR plug. A handy 'bass cut' switch is provided, giving the user ability to reduce breath and movement noise. It provides a standard 3 pin XLR output for conne
C0356 Phantom Powered Choir Microphone

Phantom Powered Choir Microphone

C0356

This cardioid microphone is designed to be mounted from ceilings in installations such as churches where greater noise isolation is required. Low profile design and flexible cable hanger provide for diverse mounting options and minimum visibility. Phant
C0348 Windsock to suit C8914

Windsock to suit C8914

C0348

Spare windsock to suit
C0347 Windsock to suit C0361

Windsock to suit C0361

C0347

Used to negate breath noise and eliminate wind or breath “pop”. Suits C 0361 shotgun microphone.
C0346 Windsock to suit C0375

Windsock to suit C0375

C0346

Used to negate breath noise and eliminate wind or breath "pop". Size refers to inside diameter of windsock opening.7mm
C0345 10mm Pencil Microphone Windsock

10mm Pencil Microphone Windsock

C0345

Used to negate breath noise and eliminate wind or breath “pop”.
C0344 40mm Ball Microphone Windsock

40mm Ball Microphone Windsock

C0344

Used to negate breath noise and eliminate wind or breath “pop”.
C0342 27mm Medium Microphone Windsock

27mm Medium Microphone Windsock

C0342

Used to negate breath noise and eliminate wind or breath “pop”.
C0340 20mm Pencil Microphone Windsock

20mm Pencil Microphone Windsock

C0340

Used to negate breath noise and eliminate wind or breath 'pop'
C0338 8mm Windsock To Suit C8911A

8mm Windsock To Suit C8911A

C0338

This windsock is designed specifically to suit C8911A headband microphone and is sold as both a spare part and as a generic unit.
C0337 12mm Lapel Microphone Windsock

12mm Lapel Microphone Windsock

C0337

Used to negate breath noise and eliminate wind or breath "pop". This windsock is designed specifically to suit our lapel microphone and is sold as both a spare part and as a generic unit.
C0336 CB Type Microphone Mounting Clip

CB Type Microphone Mounting Clip

C0336

Microphone clip to suit the C 0333/C 0334 / C 0335 range of CB microphones.
C0335 CB Type Balanced Microphone With Bare Ends

CB Type Balanced Microphone With Bare Ends

C0335

Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord 2m (including switch pair). Suitable for CB''''s, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz
C0334 5 Pin XLR CB Type Balanced Microphone

5 Pin XLR CB Type Balanced Microphone

C0334

Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord (including switch pair). Suitable for CB's, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz (C 0334), 300Hz - 6kHz (C 0335)
C0333 CB Type Microphone With Bare Ends

CB Type Microphone With Bare Ends

C0333

Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord (including switch pair). Suitable for CB's, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz (C 0334), 300Hz - 6kHz (C 0335)
A2620 4 Input Microphone Mixer

4 Input Microphone Mixer

A2620

This compact mono mixer allows 4 channels of audio to be mixed via 6.35mm unbalanced connections. It features 4 x 6.35mm unbalanced inputs, 1 x 6.35mm balanced master output, master volume control. Can be operated by 9V battery or 12V plugpack. Sold se
A2339 Attenuator Volume Control 100W 100V Line With Relay

Attenuator Volume Control 100W 100V Line W...

A2339

This controller has been designed to install to a double electrical flush box or wall mounting block. Massive 100 watt capacity available. 11 settings plus off. Fitted with a 24V override relay. 2 Year Warranty
H5111 1U / 1RU Raw Aluminium 19

1U / 1RU Raw Aluminium 19" Rack Blanking P...

H5111

A 1RU raw aluminium 19 inch rack blanking panel. Ideal for professional looking custom switch panels, control panels or to fill in blank spaces of rack frames. Integral ribs on the rear for extra strength and rigidity of the panel.
H5113 3U / 3RU Raw Aluminium 19

3U / 3RU Raw Aluminium 19" Rack Blanking P...

H5113

Ideal for professional looking custom switch panels, control panels or to fill in blank spaces of rack frames. All models feature integral ribs on the rear for extra strength and rigidity of the panel.
H5132 2U / 2RU Black Anodised Aluminium 19

2U / 2RU Black Anodised Aluminium 19" Rack...

H5132

Ideal for professional looking custom switch panels, control panels or to fill in blank spaces of rack frames. All models feature integral ribs on the rear for extra strength and rigidity of the panel.
H5172 2U XLR 24 Way Patch Panel 19

2U XLR 24 Way Patch Panel 19" Rack Panel

H5172

Pre-punched with either 12(1U) or 24(2U). Tough black powdercoated finish. H 5170 & H 5172 suit the following connectors: P 0804 XLR 3 Pin Female P 0824 XLR 5 Pin Female P 0904 Amphenol XLR 3 Pin Female P 0924 Amphenol XLR 5 Pin Female Note: Thi
H5438A 38U 600mm Deep 19

38U 600mm Deep 19" Rack Frame

H5438A

These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment.
H5602 450mm Deep 19

450mm Deep 19" Rack Frame Louvered Top Panel

H5602

A vented steel panel designed to suit the range of Black rack frames. It is louvered to allow heat to flow up and away from the cabinet but reduce the amount of dust and dirt collected on top of the equipment within the rack.
H5606 6U 450mm Deep 19

6U 450mm Deep 19" Rack Frame Panel Set

H5606

These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi
H5615 15U 450mm Deep 19

15U 450mm Deep 19" Rack Frame Panel Set

H5615

These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi
H5618 18U 450mm Deep 19

18U 450mm Deep 19" Rack Frame Panel Set

H5618

This 18U panel sets provide a neat finish, concealing all enclosed equipment and prevent unauthorised access to the rack. Each set includes a solid top panel and two side panels to suit the 450mm black rack frames. To add ventilation, we suggest using the H5602 vented top panel.
H5630 30U 450mm Deep 19

30U 450mm Deep 19" Rack Frame Panel Set

H5630

These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi
H5709A 9U Perspex 19

9U Perspex 19" Rack Door

H5709A

These lockable perspex doors may be mounted on the front or rear of the rack. Note, a pop-rivet gun is required for attaching door to the rack frame. Add 30mm to the depth measurement of your rack per door. All doors are keyed alike.
H5764A 24U Steel 19

24U Steel 19" Rack Door

H5764A

These lockable vented steel doors may be mounted on the front or rear of the rack. Note, a pop-rivet gun is required for attaching door to the rack frame. Add 30mm to the depth measurement of your rack per door. All doors are keyed alike. 24U.
A2513 Balanced To Unbalanced Converter XLR-RCA

Balanced To Unbalanced Converter XLR-RCA

A2513

Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control. +10dB max signal gain. Steps up input signal by factor of 16, ie 20mV in = 320mV out.
C7197A Microphone Tie Clip Lavalier for C7195A/B/C (3P Mini XLR)

Microphone Tie Clip Lavalier for C7195A/B/...

C7197A

Lapel microphone to suit C7195A, C7195B and C7195C beltpack.
H4990 Half Rack 19

Half Rack 19" Rack Bracket

H4990

H 4990 allows the mounting of two "half rack" units into a 19" 1RU space on a rack frame. Depth: 90mm. Note: Pictured with product.
H5401 Black Nylon Washer Pk 100

Black Nylon Washer Pk 100

H5401 ROHS

Nylon washer black suit M6 Pack Qty: 100
H4605 1U Cable Support 19

1U Cable Support 19" Rack Panel

H4605

This 19" cable support bar is great for organising and supporting all your interconnect cables to the patch panels. Cables can be anchored to the panel by using cable ties to secure the cables to the supports. Black powdercoated finish.

All prices include GST