| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
18U Perspex 19" Rack DoorH5718A |
|
| These lockable perspex doors may be mounted on the front or rear of the rack. Note, a pop-rivet gun is required for attaching door to the rack frame. Add 30mm to the depth measurement of your rack per door. | |
 |
600mm Deep 19" Rack Frame Louvered Top PanelH5603 |
|
| A vented steel panel designed to suit the range of 600mm rack frames. It is louvered to allow heat to flow up and away from the cabinet but reduce the amount of dust and dirt collected on top of the equipment within the rack. | |
 |
12U Rack Cable Support TrayH5572 |
|
| These cable trays bolt to one of the upright sections in a rack frame and allow equipment leads to be cable tied neatly to the tray. This reduces the stress on the leads and also the risk of equipment becoming disconnected accidentally. Suits all Altronic | |
 |
30U 450mm Deep 19" Rack FrameH5530A |
| These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. | ||
|
24U 450mm Deep 19" Rack FrameH5524A |
| These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. | ||
|
9U 450mm Deep 19" Rack FrameH5509A |
| These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. | ||
 |
Black Nylon Washer Pk 1000H5402 ROHS |
| Nylon washer black suit M6 Pack Qty: 1000 | ||
 |
Natural Nylon Washer Pk 12H5398 |
| Nylon washer clear suit M6 Pack Qty: 12 | ||
 |
M6 Captive Nuts Pk 12H5395 |
| Captive nuts M6 Pack Qty: 12 | ||
 |
Half Rack Metal In Fill Panel to Suit H4990H4992 |
| H4991 is used to fill in the unused section when only one unit is fitted to the H4990. | ||
 |
450mm Deep 19" Rack Frame Bottom PanelH5600 |
|
| A top of bottom panel to suit Black 450mm rack frames. Powdercoated black. | |
 |
Microphone Desk StandC0500 |
| Diecast base, telescopic height adjustment from 220mm to 380mm. Weight 1.4kg. 5/8" mic holder threaded adaptor included. | ||
 |
Black Gooseneck Microphone BaseC0421 ROHS |
| Has a 5/8" male thread one end and 5/8" female thread other end. Screws included. Black base | ||
 |
Microphone HolderC0401 |
| Standard type mic holder, uses 5/8" thread to enable direct fitting to most mic stands and goosenecks. | ||
 |
Unbalanced Stereo Line Isolation Transform...A2517 |
| Unbalanced stereo 2 x RCA to unbalanced stereo 2 x RCA. | ||
 |
Low Power Fire Evac StrobeS5423 |
|
| Low current draw dual red and amber coloured strobe lights for emergency evacuation systems. Housed in a sturdy, white powder-coated steel case, this unit is designed for professional installers of fire and evacuation systems. Features simple bolt on inst | |
|
30U Perspex 19" Rack DoorH5730A |
|
| These lockable perspex doors may be mounted on the front or rear of the rack. Note, a pop-rivet gun is required for attaching door to the rack frame. Add 30mm to the depth measurement of your rack per door. All doors are keyed alike. 30U. | |
 |
38U 450mm Deep 19" Rack Frame Panel SetH5638 |
|
| These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi | |
|
12U 450mm Deep 19" Rack Frame Panel SetH5612 |
|
| These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi | |
|
600mm Deep 19" Rack Frame Bottom PanelH5601 |
|
| A top of bottom panel to suit 600mm rack frames. Powdercoated black. | |
|
18U Rack Cable Support TrayH5578 |
|
| ||
|
15U Rack Cable Support TrayH5575 |
|
| These cable trays bolt to one of the upright sections in a rack frame and allow equipment leads to be cable tied neatly to the tray. This reduces the stress on the leads and also the risk of equipment becoming disconnected accidentally. | |
 |
1.8m Rack Mounting Strip PairH5554 |
|
| Turn your custom cabinet into a rack cabinet. Ideal for use in road cases or custom timber cabinets. Sold as a pair. NOTE: Due to the size of this product we are only able to ship via road freight so when ordering allow extra time for delivery | |
|
1.2m Rack Mounting Strip PairH5552 |
|
| Turn your custom cabinet into a rack cabinet. Ideal for use in road cases or custom timber cabinets. Sold as a pair. | |
|
38U 450mm Deep 19" Rack FrameH5538A |
| These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. |
Designed & manufactured in Australia.
