|
Description |
Downloads |
Specs |
Ordering |
|
 |
A4024A NEW
|
|
- VOX muting on input 1.
- Balanced microphone inputs.
- Output muting circuit.
- Stereo line inputs & tape output.
- Bass and treble tone controls.
- Output terminals for 100V line and 8 - 16Ω loads
- Over-voltage, over current, thermal run-away and short circuit load protection.
- Muting Features: VOX Muting Via Input 1, Switch Contacts and Output Muting
|
|
A staple of the Redback range since we first started, the 30W amplifier meets the requirements of small to medium public address installations. |
 |
A2233A NEW
|
|
|
|
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
 |
A4660A NEW
|
|
- Standard Features:
- Touch control paging with pre and post announcement chime options.
- Adjustable microphone automatic gain control (AGC).
- High quality electret microphone with high ambient noise control and feedback rejection.
- Adjustable backlight brightness and dimmed brightness levels with selectable timeout period.
- All glass front bezel for a stylish finish for any room.
- Connects via economical Cat5e UTP cabling.
- For long cable runs (approx. 200m+) we recommend using our A 4658 Power Injector.
|
|
This paging console is designed to provide general paging to zones when connected to a variety of Redback products. It provides a visual indication of the status of all audio sources and zones within the system at a glance, sharing a common screen with the master wallplates available for use with these systems. |
 |
A4868 NEW
|
|
- Up to 24 zones of paging, BGM and message playback.
- Designed in conjunction between Altronics Redback PA team and Merlaud.
- Flexible design bridges the gap between IP PA systems and traditional analogue 100V line zone PA.
- Simple touchscreen operation.
- Versatile design can be used in facilities with multiple buildings.
- Connects to ethernet switch (and to paging console and decoders) using UTP Cat6 cabling.
- Facilitates playback of alert and evacuation tones, schools bells and recorded messaging.
- Zone level do not disturb settings.
- BGM muting by PA, bell or emergency tones.
- Operates with 100V line override relays to ensure full volume evacuation warnings when initiated.
|
|
This paging controller is the heart of the system where all commands are initiated. It provides zone PA selection, multi-zone recall, background music (BGM) selection and do not disturb settings. |
 |
A4026A NEW
|
|
- 19" rack system mountable.
- Push to talk (PTT) muting on microphone 1.
- Balanced microphone inputs.
- VOX muting circuit.
- Stereo line inputs & tape output.
- Bass and treble tone controls.
- Output terminals for 100V line and 8 - 16Ω loads
- Over-voltage, over current, thermal run-away and short circuit load protection.
|
|
A staple of the Redback range since we first started, the 30W amplifier meets the requirements of small to medium public address installations. Rack mount version of Redback A 4024A. |
 |
A4941 |
|
- Connects via RJ45 UTP cabling
- Point to point connection
- Allows mic or line level connection
- DIP switch selectable sensitivity
- Level control
- Fits into a single gang wallbox
- 24V DC input
|
|
This handy interface wallplate allows balanced signals to be transmitted over long distances using economical UTP data cabling. |
 |
A4598V |
|
-
 100% developed, designed & assembled in Australia.
- Since 1974 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
 Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
The remote wall plates provide the same functionality as the buttons on the front of the A4595A. |
 |
A4865 NEW
|
|
- Interfaces with the Merlaud A4868 paging console and A4872 zone decoder boxes.
- Designed in conjunction between Altronics Redback PA team and Merlaud.
- Flexible design bridges the gap between IP PA systems and traditional analogue 100V line zone PA.
- Versatile design can be used in facilities with multiple buildings.
- Connects to ethernet switch (and to paging console and decoders) using UTP Cat6 cabling.
- Facilitates playback of alert and evacuation tones, schools bells and recorded messaging.
- Zone level do not disturb settings.
- BGM muting by PA, bell or emergency tones.
- Operates with 100V line override relays to ensure full volume evacuation warnings when initiated.
|
|
The zone encoder is a 19" rack mount audio encoder which works in conjunction with the Merlaud A4868 touchscreen paging console. |
 |
A4872 NEW
|
|
- Interfaces with the Merlaud A4865 zone encoder to interface analogue PA systems with IP paging system.
- Designed in conjunction between Altronics Redback PA team and Merlaud.
- Converts all system audio singles back to analogue stereo RCA output (or speaker level) for connection to zone PA amp.
- Connects to ethernet switch (and on to paging console and encoder) using UTP Cat6 cabling.
- Versatile design can be used in facilities with multiple buildings.
- Facilitates paging, bell or emergency evacuation tones.
- Allows operation of 100V line override relays for full volume in evacuation conditions.
|
|
The zone decoder provides a way to interface traditional stereo and 100V line PA systems with the Merlaud IP communicator system. |
 |
HD5809 NEW
|
|
- Open frame design with hinged front face.
- Spring loaded automatic latching retainers.
- SPCC 1.5mm cold rolled steel construction with industrial strength powdercoating.
- Designed to comply with 19" international standard.
- RAL9004/5 black colour.
- Supplied flat pack - assembles quickly.
- Load bearing capacity 25kg
|
|
An open frame hinged wall mount 9RU 19” rack system designed for wall mounting equipment up to 420mm deep. Ideal for combinations of patch panels, security and audio equipment. |
 |
H5133 |
|
- Designed & manufactured in Australia.
- This Zip-Rack 19 inch rack product is designed and manufactured locally. For over 40 years Altronics has provided quality locally made racking system products for professional audio and communications use. Support local manufacturing and buy Australian! Read more about our Australian Made products
|
|
Ideal for professional looking custom switch panels, control panels or to fill in blank spaces in rack frames.
All models feature integral ribs on the rear for extra strength and rigidity.
|
 |
A4599V |
|
- Allows remote activation of the A4505 Controller.
- Connection is made via Cat5e cable up to a maximum range of 300m.
- Protective “flip up” covers. to prevent accidental operation.
- Dual Facia covers included.
- Fits standard electrical wall boxes.
|
|
Redback WallPlate allows the A 4505 Lockdown Timer to be controlled remotely. Featuring Lockdown, Fire, Chime and Cancel buttons, the plate can be located up to 100m away from the main unit. |
 |
A4389 NEW
|
|
- 6 Balanced microphone inputs / 6 Aux inputs / 1 Music input
- Robust design incorporating latest Mosfet technology
- Very Low noise and distortion
- 100V standard with optional 70V and 4-16Ω outputs
- 240V AC or 24V DC operation
- VOX muting on inputs 1 and 2 (Switch selectable internally)
- Adjustable VOX level sensitivities
- Bass and Treble controls
- Tape Output
- Phantom power on microphone inputs (DIP switch selectable internally)
- Multi stage thermally cued fan cooling
- Output Peak Limited
- Thermal Overload protected
- Signal Presence Indicator
- Half power mode when overdriven
- Fault Indicators
- 24V DC Power Status Indicator
- Optional Alert/Evac module with voice over message for emergency tones (A 4573)
- Optional remote volume (With A 4373 Digital volume control module fitted and external A 2280B wall plate)
- Rack Mountable (suits 19 inch racks) with optional A 4376 rack ears
|
|
Designed for applications requiring up to six microphone inputs, without compromising output power and overall performance. Each model features inputs which can be configured for either microphone or line level operation. |
 |
A4220 NEW
|
|
- Modular design allows for mix and match amplifiers within 1RU rack space.
- Class-D design with excellent performance and efficiency.
- LED indicators for protection mode, clipping condition and signal presence.
- 100V line or 8 ohm output via screw terminals.
- Stereo RCA line input.
- Balanced line input via 3 pin Euroblock pluggable terminal.
- High pass filter at 180Hz -3dB.
- Built-in short circuit, overload and high temperature protection.
- 2 year warranty.
|
|
This 120W PA zone amplifier developed by Redback, allows installers to mix and match amplifiers within a 1RU 19” rack space. |
 |
HD5806 NEW
|
|
- Open frame design with hinged front face.
- Spring loaded automatic latching retainers.
- SPCC 1.5mm cold rolled steel construction with industrial strength powdercoating.
- Designed to comply with 19" international standard.
- RAL9004/5 black colour.
- Supplied flat pack - assembles quickly.
- Load bearing capacity 20kg
|
|
An open frame hinged wall mount 6RU 19” rack system designed for wall mounting equipment up to 420mm deep. Ideal for combinations of patch panels, security and audio equipment. |
 |
A4954 |
|
|
|
The Redback® A 4954 receives audio from compatible Redback® Cat5e/6 transmitters and converts the signal to a balanced XLR output with PTT connection. |
 |
A4952 |
|
|
|
This handy interface box allows balanced signals to be transmitted over long distances using economical UTP data cabling, and provides easy local zone connection for audio sources. |
 |
A4567C |
|
- This unit is designed for “loop in loop out” serial wiring to loudspeakers with a 47KΩ terminating resistor at the end of the line. Star wiring or tee offs are prohibited. Each loudspeaker requires a series connected 22µf bipolar capacitor for correct operation. A delay of 10 seconds is provided before registering a fault to minimise false alarms.
|
|
Specifically designed to monitor the condition of 100V line speaker systems in emergency paging and fire evacuation installations. Many large commercial installations have speaker circuits in excess of 250W. |
 |
A4221 NEW
|
|
- Modular design allows for mix and match amplifiers within 1RU rack space.
- Class-D design with excellent performance and efficiency.
- LED indicators for protection mode, clipping condition and signal presence.
- 100V line or 8 ohm output via screw terminals.
- Stereo RCA line input.
- Balanced line input via 3 pin Euroblock pluggable terminal.
- High pass filter at 180Hz -3dB.
- Built-in short circuit, overload and high temperature protection.
- 2 year warranty.
|
|
This 2 x 120W PA zone amplifier developed by Redback, allows installers to mix and match amplifiers within a 1RU 19” rack space. |
 |
A4427A NEW
|
|
- Eight input channels
- Micro SD card message player for audio announcements
- Individual level, bass and treble control on all inputs
- Six levels of VOX priority
- Adjustable VOX sensitivity
- Alert and Evacuation override mode
- 3.5mm music input
- Adjustable input sensitivity on line inputs
- 24V DC battery back up terminals
- In built Alert/Evac/Chime functionality
- 24V DC output
- MP3 active indicator
- LED VU meter
- 10 Year Warranty
- Australian Designed and Manufactured
|
|
This unique Redback PA mixer features four input channels which are user selectable for either balanced mic, line or auxiliary use. In addition it incorporates a four channel SD card based message player making it an excellent choice for retail, supermarkets, hardware stores and more. |
 |
A4219 NEW
|
|
- Modular design allows for mix and match amplifiers within 1RU rack space.
- Class-D design with excellent performance and efficiency.
- LED indicators for protection mode, clipping condition and signal presence.
- 100V line or 8 ohm output via screw terminals.
- Stereo RCA line input.
- Balanced line input via 3 pin Euroblock pluggable terminal.
- High pass filter at 180Hz -3dB.
- Built-in short circuit, overload and high temperature protection.
- 2 year warranty.
|
|
This 2 x 60W PA zone amplifier developed by Redback, allows installers to mix and match amplifiers within a 1RU 19” rack space. |
 |
HD5212 NEW
|
|
- 12RU rack height.
- Open frame design with side load wall mounting (equipment is 90° to the wall face)
- SPCC 1.5mm cold rolled steel construction with industrial strength powdercoating.
- Designed to comply with 19" international standard.
- RAL9004/5 black colour.
- Supplied flat pack - assembles quickly.
- Load bearing capacity 25kg
|
|
This 12RU 19" open rack frame allows you the option of side mounting to the wall surface, or use as a freestanding rack on castors. |
 |
A4953 |
|
- Connects via RJ45 UTP cabling
- Point to point connection
- DIP switch selectable sensitivity
- Level control
- Fits into a single gang wallbox
- 24V DC input
|
|
This handy interface wallplate allows balanced signals to be transmitted over long distances using economical UTP data cabling. |
 |
A4218 NEW
|
|
- Modular design allows for mix and match amplifiers within 1RU rack space.
- Class-D design with excellent performance and efficiency.
- LED indicators for protection mode, clipping condition and signal presence.
- 100V line or 8 ohm output via screw terminals.
- Stereo RCA line input.
- Balanced line input via 3 pin Euroblock pluggable terminal.
- High pass filter at 180Hz -3dB.
- Built-in short circuit, overload and high temperature protection.
- 2 year warranty.
|
|
This 60W PA zone amplifier developed by Redback, allows installers to mix and match amplifiers within a 1RU 19” rack space. |
 |
A4225 NEW
|
|
- Modular design allows for mix and match amplifiers within 1RU rack space.
- Class-D design with excellent performance and efficiency.
- LED indicators for protection mode, clipping condition and signal presence.
- 100V line or 8 ohm output via screw terminals.
- Stereo RCA line input.
- Balanced line input via 3 pin Euroblock pluggable terminal.
- High pass filter at 180Hz -3dB.
- Built-in short circuit, overload and high temperature protection.
- 2 year warranty.
|
|
This 2 x 480W PA zone amplifier developed by Redback, allows installers to mix and match amplifiers within a 1RU 19” rack space. |
