| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
300mm Natural Gooseneck Microphone ExtensionC0410 |
| Microphone gooseneck incorporating 5/8" thread male to female. Matching bench mount bases C 0420/21. 300mm Chrome. | ||
 |
Black desk Mount XLR Microphone SocketC0431 ROHS |
| Incorporates a 3 pin XLR socket for mounting gooseneck microphones. Screws directly to a desk or bench top making a neat and simple installation. Black. | ||
 |
1U / 1RU Snap In Steel 19" Rack Blanking P...H5136 |
| A real time saver for the installer, these snap in rack panels provide instant in-fill between equipment in 19" rack systems. They require no cage nuts, bolts or tools and are easily removed and relocated if required by pushing the two pressure clips inwards. Coated in a hard wearing stippled black powdercoat. | ||
 |
Windsock to suit C0361C0347 |
| Used to negate breath noise and eliminate wind or breath “pop”. Suits C 0361 shotgun microphone. | ||
 |
Protective Pouch To Suit C7195A/B BeltpackC7200 |
| Protective poromeric pouch to suit C7195A or C7195B beltpack lavalier transmitter. | ||
 |
Natural Nylon Washer Pk 100H5399 |
| Nylon washer clear suit M6 Pack Qty: 100 | ||
 |
1U / 1RU Black Steel 19" Rack Blanking PanelH5141A |
| Manufactured from 1mm steel and finished in a textured powder coat. The top and bottom edges of each panel have a return for added rigidity. | ||
 |
Black Nylon Washer Pk 100H5401 ROHS |
| Nylon washer black suit M6 Pack Qty: 100 | ||
 |
Large Wireless Microphone HolderC0404 ROHS |
| Designed to suit large radio mics. Uses standard 5/8" thread to enable direct fitting to most mic stands and goosenecks. Features flexible plastic to allow the accommodation of a variety of microphone sizes. | ||
 |
Microphone Mini Tripod StandC0491 |
| Mic stand has fold in legs and stands 86mm high when extended. With standard 5/8" thread. | ||
 |
M6 Captive Nuts Pk 12H5395 |
| Captive nuts M6 Pack Qty: 12 | ||
 |
Spring Loaded Microphone HolderC0405 |
| Spring loaded mic holder, uses 5/8" thread to enable direct fitting to most mic stands and goosenecks. | ||
 |
22mm Flexible Microphone HolderC0402 |
| Designed to suit narrow bodied hard wired mics. Uses standard 5/8" thread to enable direct fitting to most mic stands and goosenecks. Features flexible plastic to allow the accommodation of a variety of microphone sizes. | ||
 |
Microphone HolderC0401 |
| Standard type mic holder, uses 5/8" thread to enable direct fitting to most mic stands and goosenecks. | ||
 |
Blanking Plate To Suit H5185H5186 |
| Blanking plate powdercoated in the same colour as the main panel. | ||
 |
Black Gooseneck Microphone BaseC0421 ROHS |
| Has a 5/8" male thread one end and 5/8" female thread other end. Screws included. Black base | ||
 |
Natural Gooseneck Microphone BaseC0420 |
| Has a 5/8" male thread one end and 5/8" female thread other end. Screws included. Chrome base | ||
 |
19 Inch Rack Mount Blanking Panel to suit ...H5159 NEW |
| A blanking panel to fill unused spaces in the H5158 Merlaud zone decoder rack panel. | ||
 |
M6 Black Pan Phillips Rack Bolt Pk 12H5390A |
| M6 x 16mm black. Phillips head. Ideal for use with 19" racking systems. Pack Qty: 12 | ||
 |
M6 Silver Pan Phillips Rack Bolt Pk 12H5385A |
| M6 x 16mm zinc plated. Phillips head. Ideal for use with 19" racking systems. Pack Qty: 12 | ||
 |
Windsock to suit C0375C0346 |
| Used to negate breath noise and eliminate wind or breath "pop". Size refers to inside diameter of windsock opening.7mm | ||
|
Natural Nylon Washer Pk 12H5398 |
| Nylon washer clear suit M6 Pack Qty: 12 | ||
 |
40mm Ball Microphone WindsockC0344 |
| Used to negate breath noise and eliminate wind or breath “pop”. | ||
 |
CB Type Microphone Mounting ClipC0336 |
| Microphone clip to suit the C 0333/C 0334 / C 0335 range of CB microphones. | ||
|
Black Nylon Washer Pk 12H5400 ROHS |
| Nylon washer black suit M6 Pack Qty: 12 |
