|
Description |
Downloads |
Specs |
Ordering |
|
 |
A4962 NEW
|
|
- Ideal for networking multiple microphones in supermarkets and hardware stores
- Loop in/loop out wiring with provision for tee-offs to remote points
- Connects to Redback A4960 microphone transmitter wall plates which connect to the local microphone.
|
|
Designed for systems that use a large number of Redback C0325/6 mics such as supermarkets and hardware stores. This design is very unique in that it allows you to install unlimited PTT mics on a single circuit, but only allow one mic at a time to operate. |
 |
C2191 |
|
- Power rating: 30 Watts
- Power taps: 3.75, 7.5, 15, 30 Watts
- SPL 1W @ 1m 89dB
- Freq response: 75Hz - 25kHz
- Ceiling cutout: 220mm Ø
|
|
Designed for foreground & sound reinforcement applications, this speaker employs a high quality 6.5" 2-way polypropylene driver, along with an enclosure which is ported and damped for excellent bass response. The 0.75" waveguide coupled tweeter gives smoo |
 |
C1055A |
|
- Power Taps: 8Ω, 10, 15, 20, 30W
- Impedance: 333Ω, 500Ω, 667Ω, 1kΩ & 8Ω
- SPL 1W @ 1m: 91dB
- SPL Full Power @ 1m: 106dB
- Freq. Resp.: 100Hz - 20kHz
- Weight: 3kg
- Colour: White
- Material: ABS Plastic
- Cable Length: 5M
- Overall Diam.: 260mm approx.
- IP Rating: IEC529 IP55
- Power Tap Cable Colours:
- Red: Common
- White: 30W
- Blue: 20W
- Yellow: 15W
- Green: 10W
- Brown: 8 Ohm
|
|
Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. |
 |
A4933 NEW
|
|
- Frequency Response:
- Mic input: 140Hz - 20kHz
- Aux input: 140Hz - 20kHz
- Music input: 140Hz - 20kHz
- Input Sensitivity:
- Mic input: 1mV -13mV balanced
- Aux input: 40mV - 800mV balanced
- Music input: 40mV - 800mV balanced
- Connectors:
- Mic Input: 3 pin XLR
- Aux Input: 2 x RCA
- Music Input: 3.5mm Stereo Socket
- General:
- Output: RJ45 8P8C
- Data transmission: Cat5e/6 cabling (max 200 metres)
- Bluetooth Version: 5.1
- Bluetooth Range: 30m average (clear line of sight)
- Weight: ≈0.11kg
- Power: Powered over Cat5e/6 cable
|
|
This Microphone/Line Pre Amplifier Wallplate accepts either a microphone level, line level, music or bluetooth input and converts the signal to a balanced high level output. |
 |
A4116 |
|
- 15W RMS per channel
- 1 music input (3.5mm)
- 1 auxiliary input
- 4-16Ω output
- 24V DC operation
- Includes Power Supply
|
|
Packed with features, this super compact stereo amp is ideally suited to classrooms, boardrooms, boutiques, reception areas or anywhere a small functional stereo system is required. |
 |
C8911A |
|
- Type: Electret
- Impedance: 600 Ohm ± 30%@1KHz
- Frequency Response: 100Hz-14,000Hz
- Sensitivity: -62dB @ 1KHz
|
|
The Redback Sports Headband Microphone is designed to provide trouble free performance even through the most vigorous of workouts. A semi-rigid gooseneck ensures the microphone remains steady during heavy exercise and is molded to fit comfortably over t |
 |
A4017 |
|
- To mount any of the Redback half rack products into a 19" wide racking system, the H 4990 bracket is required. If a single product is mounted into the H 4990, then a metal (H 4992) or plastic (H 4993) infill panel can be fitted for a neater finish.
|
|
Super compact with surprising performance specifications, intended for smaller PA system applications. Our engineering team based the design around a National TDA1519 monolithic IC achieving virtually "destruction proof" operation under quite severe misuse |
 |
C2083 ROHS
|
|
- IP67 dust & moisture rated
- UV stabilised
- -30°C to 70°C for harsh environments
- 8 Ohm or 100V tappings
- Recessed bracket with stainless steel hardware
|
|
The perfect choice for harsh industrial environments. A wide operating temperature range, coupled with an IP67 rated enclosure make this horn speaker suitable for a vast range of applications. It is resistant to corrosion and chemicals. |
 |
A1720C NEW
|
|
- Custom tracks
- Inbuilt tone & phrase library
- 12-30V DC operation @ 300mA (switched output only operates at 24V+).
- Micro SD card included
- All connections made via screw terminals
- Tones conform to Australian standard
- Provision for voice over in evacuation mode
- Random play on triggers - if multiple MP3s in trigger folder, they will be played at random.
- Optional MP3 playback on trigger cancel (alternate mode only)
- Compact size: 120 x 70mm
|
|
The A 1720C is an MP3 based message player and tone generator designed for public address, security, customer direction or emergency evacuation announcements. |
 |
A2655 NEW
|
|
- All inputs top mounted for easy access
- Combo XLR and 6.35mm jack inputs on channels 1-6
- Bluetooth audio reciever
- 24 bit 48KHz DSP effects with preset adjustment and level
- Adjustable aux return level
- USB MP3 recording and playback
- LED VU meter
- Monitor & phones outputs
- Aux send and return
- Foot switch input
- 48V phantom power
|
|
A lightweight and compact USB powered mixer featuring 14 channels. Channels 1 to 6 are XLR/6.35mm combo sockets suitable for both mic and line level signals. |
 |
A4476 |
|
- Remote preset selection
- Cat5e connection
- LCD indicates presets available
|
|
The A4476 wallplate is used to provide local access to presets programmed into the A4480B. |
 |
A4489A |
|
- Four output zones
- Microphone or Line level output
- BGM input for background music to all zones
|
|
The A4489A zone relay unit may be installed remotely and has been designed to switch either low level inputs or amplifier outputs and interfaces the A4660 paging console with existing PA systems. Suits for line level or 100V line zone switching. |
 |
C0991A |
|
- Bluetooth audio
- FM radio
- USB playback
- Rugged moulded ABS construction
- Standard magnet-driven woofer for low distortion
- High performance large voice-coil diameter
- Wide frequency response
- Titanium diaphragm compression driver
- 4 inbuilt rigging points allow the units to be suspended using eye bolts
- Inbuilt top hat mount and carry handle
- Mic Level input <5mV, Line Output 250mV
|
|
This 200mm 8 Inch 2 Way Powered PA Speaker MP3/BT/FM/USB is housed in rugged wedge shaped nylon fibre and ABS moulded cabinet. |
 |
C8884 |
|
- Multilevel high and mid frequency narrowband filters
- Advanced noise detection and control
- Tone key linked identity to reduce interference
- Operating frequencies 520 / 524 MHz
- RF signal presence indicator LEDs for channels A and B
- Range of up to 60m in ideal conditions open air
- 6.35mm unbalanced line mix output
- 3-pin balanced XLR mic output for channels A and B
- Screen shows parameters for both channels
- Plug pack included
- 4 x AA batteries included
|
|
For systems requiring the freedom of two independent wireless microphones at an economical price. The sturdy 1/2 rack mount cabinet is fitted with 2 channel fixed frequency wireless receiver. |
 |
A4935 |
|
- Standard dual gang wallplate
- Connects via RJ45 UTP cabling
- Mixed audio output
- Connects to A 4942 balanced UTP receiver or other Redback UTP compatible products.
- Individual & master level controls
- Stereo RCA input
- 24V DC input via Cat5 UTP cable from connected equipment
- 3 pin XLR mic/line level inputs
|
|
These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single receiver for connection to a zone amplifier. |
 |
A4915 NEW
|
|
- 2 inputs to 1 output
- Suitable for mic or line signals
- Input 1 vox mutes input 2
- Separate controls for volume and vox sensitivity
- Vox operated 24V DC output for control of external devices
- Compact design
- 24V DC operation via 2.1mm DC jack (plugpack sold separately)
- Australian designed and manufactured
|
|
This compact 2 input mixer accepts either a line level signal or balanced microphone signal for each input. |
 |
A4958 NEW
|
|
- Input Level Sensitivity: 100mV/1V
- Output Level Sensitivity: 100mV/1V
- Input Connectors: 3 pin XLR balanced, 2 x RCA
- Output Connectors: 3 pin XLR balanced, 2 x RCA
- Dimensions: 40W x 83D x 50H
- Weight: 0.2 kg
|
|
The Redback A 4958 is a compact, professional-grade pre-amplifier designed for versatility and reliability. It accepts both XLR and RCA inputs and provides a volume-adjustable XLR or RCA output, with RCA signals internally mixed to mono. |
 |
CL8893D NEW
|
|
- USB rechargeable with internal lithium battery
- Can be used with a range of Redback mini XLR headsets and lapel microphones
- Compact & lightweight
- Fitted with 3 pin mini XLR socket
- On / Off / Mute switch
- Gain control
|
|
Wireless lavalier beltpack 700 channel transmitter ideal for use with the Redback® 700 channel receiver unit (C8890D). |
 |
C1058
|
|
- Power Taps: 5, 10, 15, 20, 30W, 8Ω
- SPL 1W @ 1m: 90dB
- Freq. Response: 70Hz - 20kHz
- Sound dispersion: 135º conical
- Weight: 2.1kg
- Colour: White
- Material: ABS Plastic
- Cable Length: 5M
- Dimensions: Ø185mm x 230mm
- IP Rating: IP45
|
|
Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. |
 |
A4960 NEW
|
|
- Ideal for networking multiple microphones in supermarkets and hardware stores
- Loop in/loop out wiring with provision for tee-offs to remote points
- Connects to Redback A4962 microphone transceiver which provides output to PA amplifier.
|
|
Designed for systems that use a large number of Redback C0325/6 mics such as supermarkets and hardware stores. This design is very unique in that it allows you to install unlimited PTT mics on a single circuit, but only allow one mic at a time to operate. |
 |
A4598 |
|
-
 100% developed, designed & assembled in Australia.
- Since 1974 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
The remote wall plates provide the same functionality as the buttons on the front of the A 4595A. All switches have safety covers to prevent accidental triggering. If a tone is triggered by the main unit or a paging console the corresponding switch on the wall plate will illuminate. |
 |
A4581 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1974 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
 Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
Allows the A4565A & A4500B alert/evac units to be activated remotely. Featuring alert, evacuation and cancel buttons with protective "flip up" covers to prevent accidental operation. |
 |
A4599 |
|
- Allows remote activation of the A4505 Controller.
- Connection is made via Cat5e cable up to a maximum range of 300m.
- Protective “flip up” covers. to prevent accidental operation.
- Dual Facia covers included.
- Fits standard electrical wall boxes.
|
|
Redback WallPlate allows the A 4505 Lockdown Timer to be controlled remotely. Featuring Lockdown, Fire, Chime and Cancel buttons, the plate can be located up to 100m away from the main unit. |
 |
A4581V |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1974 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
The A4581V wall plate allows remote triggering of the Alert, Evacuation and Bell tones and the cancel function of the A4565A Alert/Evacuation Controller. |
 |
A4598V |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1974 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
The remote wall plates provide the same functionality as the buttons on the front of the A4595A. |
Redback