|
Description |
Downloads |
Specs |
Ordering |
|
 |
A6512 |
|
-
 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
 Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
These compact modules are designed to remotely alter the volume of any low level signal source feeding any amplifier or mixer remotely, via RS 232 or RS 485 serial control. They will interface with the Redback A 6500 wallplate or any other 3rd party control system. Requires 24V DC power supply. Includes one input with remote volume adjustment via s |
 |
C2064 |
|
- Power taps: 10, 20, 30, 40, 50 & 60W
- Frequency response: 160Hz - 7kHz
- Impedance: On 100V Line 165Ω/60W, 200Ω/50W, 250Ω/40W, 330Ω/30W 500Ω/20W, 1kΩ/10W
- SPL at 1kHz(dB): 113.5(1W/1m)
- Maximum SPL at 1kHz (dB): 132(60W/1m)
- Throat coupling: 1-3/8" 18TPI Throat couple No.1
- Dimensions: Ø125 x 100mm
- Weight: 2.92kg
|
|
Reflex horn speakers are ideally suited for open air paging applications where speech clarity is of prime importance. Typical uses include fairs, sporting venues, auctions, fetes etc. Constructed from spun aluminium, the massive 540mm flare is designe |
 |
A1117 NEW
|
|
- Compact Class D stereo 2 x 15W (into 4Ω)
- Bluetooth 5.1 connectivity
- Upgrade your favourite speakers to Bluetooth wireless
- Includes mains power supply
- Excellent range and audio clarity
- Suitable for in-ceiling mounting
- Assignable bluetooth device name and password
|
|
This Bluetooth mini amplifier is a great way to add wireless connectivity to a new or existing pair of ceiling or wall speakers that aren't Bluetooth equipped. It offers Bluetooth 5.1 connectivity for excellent device range and audio performance, coupled with an efficient Class-D amplifier. |
 |
C2103A |
|
-
 Backed by an industry leading 5 Year Speaker Performance Warranty.
- This speaker is covered by our 5 Year speaker performance warranty. Redback PA drivers are engineered and manufactured to stringent specifications ensuring maximum reliability under all operating conditions. Each driver has a power rating well above the max tapping of the transformer, ensuring reliable operation and excellent longevity.
|
|
This custom designed speaker and transformer combination has been specifically engineered to ensure a wide frequency range and dispersion angle, plus a high sound pressure level (SPL) ensuring excellent music and speech intelligibility; which is h |
 |
C2048 |
|
- Power Taps: 1.25, 2.5, 5, 7.5, 10W
- Sound Pressure Level: 105dB, 1W @ 1m, 115dB, 10W @ 1m
- Frequency. Response: 300Hz - 13kHz
- Dispersion Angle: 110°
- Flare Dimensions (mm): 180Ø x 270D
|
|
The REDBACK 10W plastic PA horn speaker is designed primarily for distributed paging systems where a high degree of speech articulation and program clarity is paramount. Ideal for general public address system requirements. |
 |
C0413 |
|
|
|
Microphone gooseneck incorporating 5/8" thread male to female. Matching bench mount bases C 0420/21. 450mm Black. |
 |
A4581 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
Allows the A4565A & A4500B alert/evac units to be activated remotely. Featuring alert, evacuation and cancel buttons with protective "flip up" covers to prevent accidental operation. |
 |
C0518 |
|
|
|
heavy duty nylon zip lock bag specially designed to protect your speaker stands from the rough treatment dished out by life on the road. Features a convenient adjustable carry strap. |
 |
C0951A |
|
- Durable extruded aluminium housing.
- 22uf bipolar line monitoring capacitor
- Attractive slimline construction.
- Fitted with high specification drivers for exceptional speech & music reproduction.
- Suitable for accurate, “long throw” applications.
- Water protected to IEC529 IP66, suitable for indoor and outdoor use.
- Durable aluminium alloy multi bracket (tested up to 1500 kgf).
|
|
Now fitted with 22uF bipolar capacitor for line monitoring use. These stylish, compact column speakers utilise multiple 3.5" (89mm) woofers and high power dome tweeters to produce superb clarity for both music and speech applications. |
 |
C2174 |
|
- Power rating: 45W 8Ω
- SPL 1W @ 1m: 92dB
- Freq response.: 40Hz - 20kHz
- Grill Type: Aluminium
- Mounting hole: 237Ø approx
- Colour: Black
|
|
The C 2174 is a 200mm (8") 8&Omega 45W coaxial speaker. These stylish, high performance, architecturally unobtrusive speaker/grill combinations can be painted to match decor. Super easy to install with a 'Flip-Lock' mounting system. Typical applications |
 |
A6514 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
These compact modules are designed to remotely alter the volume of any low level signal source over serial control. |
 |
P0730 |
|
|
|
XLR Fem. / 6.35mm Male 5m |
 |
P0715 |
|
|
|
6.35mm 2m. Balanced TRS connection male to male.
|
 |
C0361 |
|
- Insert: BackElectret - Condenser
- Polar Pattern: Line + Gradient
- Impedance: 200 Ohm balanced
- Open Circuit Sensitivity: -60dB ±3dB
- Frequency response: 30Hz - 18kHz
- Maximum SPL: 119dB (1kHz @ 1% THD)
- Dynamic Range: 89dB (1kHz at 1Pa)
- Signal to Noise: 64dB (1kHz @ 1Pa)
- Operating Voltage: Phantom power 9V - 52V DC, 2mA typical
- Output Connector: Integral 3-pin XLR Male
- Dimensions: Ø19 x 288mm
- Included Accessories: Windscreen
|
|
This shotgun mic is designed to plug directly into a desk mount XLR socket. The line + gradient pattern provides an extremely tight unidirectional pickup and high rejection of back & side signals. It features a section of flexible gooseneck for angle adju |
 |
A4578 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
Allows the A4565A alert/evac unit to be activated remotely. Featuring alert, evacuation and cancel buttons with protective "flip up" covers to prevent accidental operation. |
 |
A4935 |
|
- Standard dual gang wallplate
- Connects via RJ45 UTP cabling
- Mixed audio output
- Connects to A 4942 balanced UTP receiver or other Redback UTP compatible products.
- Individual & master level controls
- Stereo RCA input
- 24V DC input via Cat5 UTP cable from connected equipment
- 3 pin XLR mic/line level inputs
|
|
These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single receiver for connection to a zone amplifier. |
 |
C6110 |
|
- Rated power: 30W RMS
- Max power: 60W
- Impedance: 8Ω
- Freq response: 1.5kHz-20kHz
- Sensitivity 1W @ 1m: 103dB
- Voice coil diameter: 34.5mm
- Magnet weight: 567g
|
|
This super-high efficiency compression driver is perfect for PA use. |
 |
C2051 |
|
- Power taps: 1.25, 2.5, 5, 7.5, 10W
- SPL 1W @ 1m: 104dB @ 1kHz (+/- 2dB)
- SPL Max Tap @ 1m: 114dB @ 1kHz (+/- 2dB)
- Frequency response: 340Hz-10kHz
- Connection: 4 core fly lead
- EWIS line monitoring: 22uF bipolar capacitor fitted
- Dispersion angle @ 1kHz: 160° vertical, 130° horizontal
- Driver construction: Aluminium voice coil former
- Mounting depth: 255mm
- Overall weight: 1.2kg
- Operating temperature: -20°C to +55°C
- Relative humidity: < 95%
|
|
Exclusive design incorporates a dog leg mounting bracket which eliminates the need to separate the horn from the bracket during installation. A real time & money saver! Traditional horn speaker brackets have to be removed, screwed to the wall surface, and then bolted back onto the horn speaker. |
 |
C6127 |
|
|
|
Standard 1" threaded round flare. |
 |
A2261 |
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
New models supplied with two facia covers to suit your decor.
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. They feature 11 position switches |
 |
A4506 |
|
- With mains power failure the connected batteries are relay switched to the load via two 50A terminals. A sensing circuit disconnects the load when the minimum permissible discharge voltage is reached, thus preventing permanent battery damage. This charger is specifically designed for use on sealed lead acid batteries, gel technology batteries and standard vented lead acid batteries.
|
|
Ideal for PA systems & other applications requiring battery backup. This all new model incorporates a highly efficient, intelligent, multi stage switchmode battery charger ensuring optimum battery charging and performance. |
 |
A4565A |
|
- Tones conform to AS 1670.4
- Standard 1U 19” rack mount case
- Interfaces with Fire Indicator Boards
- Remote operation of Alert, Evac, Chime, Fire Test, Fire Alarm & Cancel tones
- MP3 based tone playback (with backup hard coded Alert, Evac and Bell tones)
- 24V DC operation
- Auto/Manual/Isolate keyswitch
- Key switch to 003 standard
- Local operation of Alert, Evac and PA
- MP3 based Voice Over messages for Alert and Evac cycles
- Microphone socket for PA use
- Provision for BGM (back ground music)
- Provision for Auxiliary input with front volume control
- Bell chime facility
- Switched 24V DC output for override relays on volume controls
- Switched 24V DC output for strobe operation for Alert mode
- Switched 24V DC output for strobe operation for Evac mode
- Switched 24VDC output for bell mode
- On-board timer for automatic Alert to Evac switchover, adjustable from 30secs to 7.5min in 30 second increments
- Externally operated inputs are activated by switching to ground
- Auxiliary level output
- Suitable for any amplifier with an auxiliary input
- 10 Year Warranty
- Australian Designed and Manufactured
|
|
This easy to operate building alert & evacuation controller controller is designed around industry standard building requirements. When connected to a paging system amplifier, occupants can be alerted and/or evacuated in the event of an emergency eg: fire, gas leak, bomb scare, earthquake. |
 |
A1980B |
|
- Bright fire engine red casing.
- 35W max internal amplifier.
- In-built electronic siren to gain attention when required.
- Lightweight, easy to use with trigger to talk button.
- Be heard over distances up to 100m.
- Ideal for addressing large crowds at any event.
- Requires C size batteries (8 of).
|
|
A traditional hand held megaphone or bullhorn for announcing. Suitable for sports rallies, school carnivals, conventions, demonstrations etc. Includes inbuilt electronic siren for gaining instant attention. Light weight and easy to use. Up to 100m in ideal conditions. |
 |
C0928 |
|
- Rated power: 2 x 20WRMS (2 x 30W MAX)
- SPL 1W @ 1m: 88dB
- Freq response: 80Hz-20kHz
- Dimensions (mm): 248W x 190L x 210D
- Weight passive: 2.6kg
- Weight active: 3.7kg
|
|
Great for classrooms, lecture theatres, boardrooms, cafes, function areas, pubs, bars, boutiques etc. System comprises of one active speaker with inbuilt stereo amplifier and one passive speaker which is powered from the active speaker. |
 |
CB0456 |
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
5pin XLR microphone connector mounted horizontally on a HPM wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. |
Redback