|
Description |
Downloads |
Specs |
Ordering |
|
![C1005 Mounting Bracket PA Speaker To Suit C1004A](https://images.altronics.com.au/thb/c/C0997.jpg) |
C1005 |
|
|
|
Black powdercoated steel bracket specifically designed to suit the C1004A club speaker. Comes included with the required hardware to mount the speaker to the bracket. |
![C1055A 30W 100V Line Ball Pendant Ceiling Speaker](https://images.altronics.com.au/thb/c/C1055A.jpg) |
C1055A |
|
- Power Taps: 8Ω, 10, 15, 20, 30W
- Impedance: 333Ω, 500Ω, 667Ω, 1kΩ & 8Ω
- SPL 1W @ 1m: 91dB
- SPL Full Power @ 1m: 106dB
- Freq. Resp.: 100Hz - 20kHz
- Weight: 3kg
- Colour: White
- Material: ABS Plastic
- Cable Length: 5M
- Overall Diam.: 260mm approx.
- IP Rating: IEC529 IP55
- Power Tap Cable Colours:
- Red: Common
- White: 30W
- Blue: 20W
- Yellow: 15W
- Green: 10W
- Brown: 8 Ohm
|
|
Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. |
![A2515 Balanced To Unbalanced Converter XLR-RCA / Screw Term.](https://images.altronics.com.au/thb/a/A2515.jpg) |
A2515 NEW
|
|
- Frequency response: 20 Hz - 20kHz +/- 3dB
- Input level: 0.775Vrms
- Output level: 1.97Vrms (measured at 1kHz with volume control set to max).
- Maximum output level before distortion: +24dBm
- Note the RCA output sockets are in parallel
|
|
Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control (or optional screw terminal connections). |
![A6531 Programmable Universal 7](https://images.altronics.com.au/thb/a/A6531.jpg) |
A6531 |
|
- User programmable buttons & icons
- Multiple screen pages (12 max)
- Tandem operation
- Event splash screens
- Icon library for commonly used buttons
- Infra-red control output
- RS-232 or RS-485 serial outputs
- PIR motion trigger
- Haptic & audible button feedback options
- U/UTP Cat5 cable connection
- Multi-command macros
- IR learning facility
- SD card configuration upload
- Easy to program
|
|
This universal 7" touchscreen wallplate is the perfect control system for commercial and domestic automation. Its stylish low profile design lends itself to installation in new modern homes, classrooms, lecture theatres or corporate boardrooms. |
![A6540 Programmable Universal 4.3](https://images.altronics.com.au/thb/a/A6540.jpg) |
A6540 |
|
- User programmable buttons & icons
- Multiple screen pages (12 max)
- Tandem operation
- Event splash screens
- Icon library for commonly used buttons
- Infra-red control output
- RS-232 or RS-485 serial outputs
- PIR motion trigger
- Haptic & audible button feedback options
- U/UTP Cat5 cable connection
- Multi-command macros
- IR learning facility
- SD card configuration upload
- Easy to program
|
|
This universal touchscreen wallplate is the perfect control system for commercial and domestic automation. Its stylish low profile design lends itself to installation in new modern homes, classrooms, lecture theatres or corporate boardrooms. |
![C1075 Ball Ceiling Mount Bracket Speaker](https://images.altronics.com.au/thb/c/C1075.jpg) |
C1075 ROHS
|
|
|
|
Flush mount ceiling bracket for C 1070 |
![A4597 Fire Alarm Test Wallplate to suit A4565A or A4595A](https://images.altronics.com.au/thb/a/A4597.jpg) |
A4597 |
|
-
100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
This remote wallplate interfaces with a building fire evacuation control board to offer simple fire alarm test triggering. |
![A4582 10 Zone Monitor Panel](https://images.altronics.com.au/thb/a/A4582.jpg) |
A4582 |
|
- 2U 19" rack mount
- Monitors up to 10 100V line amplifiers
- Analogue VU output level display
- No power required
- Built in monitor speaker
- Speaker volume control
- Minimal circuitry for low noise
|
|
A handy aid to test and adjust 100V line PA amplifier output levels. Capable of monitoring 10 individual amplifiers (electrically isolated from each other to prevent cross talk). Audible and visual monitoring is available from the built in speaker and VU |
![A4260B Compact 100V Class D Bluetooth PA Mixer Amplifier 120W](https://images.altronics.com.au/thb/a/A4260B.jpg) |
A4260B NEW
|
|
- Mixer amplifier with in-built SD/USB/FM tuner/Bluetooth music source
- 85% efficient class-D power performance
- Low power consumption & heat generation
- Compact 1RU case
- Bass & treble control
- Front panel mic input
- Protection circuitry
- LED indicators for signal, peak, protection and power
- Selectable 100V line/4-16Ω output
- Mic/Line/Phantom Power options on Mic 1-4
- 24V DC battery backup power input
- Emergency priority input (Mic 1)
- Adjustable VOX muting
|
|
This compact Class-D design amplifier offers multi source mixing plus USB/SD card/FM tuner audio playback and Bluetooth streaming functionality. |
![C0830 Speaker Grille Fixing Clip Pk 12](https://images.altronics.com.au/thb/c/C0830.jpg) |
C0830 |
|
|
|
Designed for securing the speaker to the grille. Simply push down onto the locating posts. Quick and easy installation. Suits C 0805 and C 0815 Super Slimline speaker grills. Pk 12 |
![A1717A Redback 4 Way MP3 Message Player](https://images.altronics.com.au/thb/a/A1717A.jpg) |
A1717A |
|
- Electrical
- Power supply: 24V DC to 30V DC 300mA (idle/maximum current draw 150mA) tip positive
- Output line: Stereo RCA 500mV nominal
- MP3 sample rate: 44kHz
- SD card size: 256MB to 16GB
- Trigger activation: Closing contact
- Switched output: 24-30VDC out (supply voltage dependent), limited to 120mA current draw
- MP3 Info
- MP3 File Format: Minimum 128kbps, 44.1kHz, 32bit, VBR or CBR, Stereo
- Length/size: Limited by card size (1600mins @ 128kbps, 44kHz on supplied 16GB)
- Bit rate: All standard MP3 rates (128kbps recommended)
- Sample rate: All standard MP3 rates (44kHz recommended)
- Channels: Stereo or mono
|
|
The A 1717A is an MP3 based message player housed in a compact flange mount aluminium enclosure and offers playback of four MP3 tracks. |
![C8893C Wireless UHF Beltpack Mic 700 Channel](https://images.altronics.com.au/thb/c/C8893C.jpg) |
C8893C |
|
- Compact & lightweight
- Fitted with 3 pin mini XLR socket
- On / Off / Mute switch
- Gain control
- Switchable impedance between mic & instrument pickup
- Requires 2 x AA batteries (either alkaline or rechargeable).
|
|
Beltpack transmitter ideal for use with the Redback 700 channel receiver unit (C 8890C). |
![C0835 Speaker Grille Fixing Clip Pk 100](https://images.altronics.com.au/thb/c/C0830.jpg) |
C0835 |
|
|
|
Designed for securing the speaker to the grille. Simply push down onto the locating posts. Quick and easy installation. Suits C 0805 and C 0815 Super Slimline speaker grills. Pk 100 |
![A2518 Stereo to Mono RCA Adapter](https://images.altronics.com.au/thb/a/A2518.jpg) |
A2518 NEW
|
|
|
|
This unit is designed to convert stereo audio signals into a summed mono line level RCA signal. |
![C1061 High Power 60W IP56 100V White PA Speaker](https://images.altronics.com.au/thb/c/C1061.jpg) |
C1061 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 112 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP56 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 60W / 30W / 15W / 7.5W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 5.25-inch woofer and 1-inch tweeter for PA sound projection. |
![C0825 Gyprock Type Speaker Grille Screw Pk 100](https://images.altronics.com.au/thb/c/C0825.jpg) |
C0825 |
|
|
|
Self drilling, self tapping screw for gypsum or plaster-board ceilings. Designed for use with battery operated drills. Suits C 0805 and C 0815 Super Slimline speaker grilles. Pk 100
Registered Design |
![A4950 Paging Microphone Chime Module](https://images.altronics.com.au/thb/a/A4950.jpg) |
A4950 |
|
-
100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
By adding this module inline with a paging microphone pre and post announcement chimes can be added to the audio signal. |
![A4598 Remote Lockdown Wallplate to suit A4595A](https://images.altronics.com.au/thb/a/A4598.jpg) |
A4598 |
|
-
100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
The remote wall plates provide the same functionality as the buttons on the front of the A 4595A. All switches have safety covers to prevent accidental triggering. If a tone is triggered by the main unit or a paging console the corresponding switch on the wall plate will illuminate. |
![A4577 6 Zone Universal Remote Alarm Wallplate](https://images.altronics.com.au/thb/a/A4577.jpg) |
A4577 |
|
- Six monitored Inputs/triggers.
- 12 to 30V DC powered.
- Audible alert by buzzer.
- Visual alert by LED (individual LED per trigger).
- LEDs stay illuminated until trigger is deactivated.
- Cancel switch to stop audible alert.
- Pluggable terminal block for Triggers and DC in.
|
|
Designed to operate on 12 to 30VDC. This six input wall plate will sound a buzzer and
illuminate a specific LED when an input is activated/triggered by a closing contact. A
Cancel button allows the buzzer to be switched off whilst the LED indicator rema |
![C0505A Microphone Banquet Type Desk Stand](https://images.altronics.com.au/thb/c/C0505A.jpg) |
C0505A |
|
|
|
Telescopes both vertically and horizontally. Swivel adjustment on horizontal arm. 5/8"" thread adaptor supplied. Heavy cast base. |
![A4948 Line Level Compressor/Limiter](https://images.altronics.com.au/thb/a/A4948.jpg) |
A4948 |
|
-
100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
This compact module is designed to go inline with an audio input source like CD/Blu-Ray etc to the input of a mixer or amplifier. It maintains a constant level to the mixer/amp regardless of the amplitude of the input signal. |
![C0449 3 pin XLR Wallplate with Microphone Clip](https://images.altronics.com.au/thb/c/C0449.jpg) |
C0449 |
|
-
100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
This 3 Pin XLR wall plate are fitted with a clip for holding. fist type CB microphones. |
![C2186 165mm (6.5](https://images.altronics.com.au/thb/c/C2186.jpg) |
C2186 NEW
|
|
- Power taps: 0.33, 0.66, 1.25, 2.5, 5 watts
- SPL 1W @ 1m: 91dB @ 1kHz ±2dB
- Freq response: 90Hz - 20kHz
- Grille: Steel
- Ceiling cutout: 195mm Ø
- Mounting depth: 100mm
- Terminal type: 2 way screw terminal
|
|
The C2186 is a 165mm (6.5") dual cone speaker with a 5W transformer. |
![C0827 Gyprock Type Speaker Grille Screw Pk 1000](https://images.altronics.com.au/thb/c/C0827.jpg) |
C0827 |
|
|
|
Self drilling, self tapping screw for gypsum or plaster-board ceilings. Designed for use with battery operated drills. Suits C 0805 and C 0815 Super Slimline speaker grilles. Pk 1000
Registered Design |
![A2237 Volume Control 40W 100V Line Clipsal Pro - Vertical Black](https://images.altronics.com.au/thb/a/A2237.jpg) |
A2237 |
|
|
|
This 40W volume control is designed for 100V line speaker systems. The volume control is fitted to a black Clipsal Pro Series wall plate which has been specifically designed for commercial building installations. |