|
Description |
Downloads |
Specs |
Ordering |
|
|
A4581V |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
The A4581V wall plate allows remote triggering of the Alert, Evacuation and Bell tones and the cancel function of the A4565A Alert/Evacuation Controller. |
|
A4598V |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
The remote wall plates provide the same functionality as the buttons on the front of the A4595A. |
|
A4599V |
|
- Allows remote activation of the A4505 Controller.
- Connection is made via Cat5e cable up to a maximum range of 300m.
- Protective “flip up” covers. to prevent accidental operation.
- Dual Facia covers included.
- Fits standard electrical wall boxes.
|
|
Redback WallPlate allows the A 4505 Lockdown Timer to be controlled remotely. Featuring Lockdown, Fire, Chime and Cancel buttons, the plate can be located up to 100m away from the main unit. |
|
C0375 |
|
- Impedance: 100Ω
- Sensitivity: -58dB ± 3dB
- Frequency response: 70Hz - 15kHz
- Cable Connection: Mini XLR
- Length: 330mm
- Polar pattern: Cardioid (unidirectional)
- Voltage: 11 - 52 Volts DC
|
|
An elegant, stylish, slimline unobtrusive desk-mount paging microphone equipped with a 3 pin balanced XLR lead. Features switchable flat or rolloff response to eliminate low frequency pickup. May also be switched to operate as push to talk or push to lock |
|
C8892D |
|
- Unidirectional condenser insert
- Exceptional performance
- Anti-roll band
- Textured body
- Requires 2 x AA batteries (either alkaline or rechargeable).
|
|
Wireless handheld 700 channel microphone ideal for use with the Redback 700 channel receiver unit (C 8890D). |
|
C0938 |
|
- Horizontal or vertical mounting
- Ball joint angle adjustment
- Dual 4” woofer drivers with 3/4” titanium dome tweeter
- Ideal for BGM & general sound reinforcement
- Stylish glossy finish & enclosure design for upmarket bars, boutiques and venues
- Available in 8 ohm or 100V line multi-tap versions.
|
|
These stylish wall speakers deliver high quality sound for music and sound reinforcement. Ideal for entertaining areas at home or boutiques, cafes, pubs & clubs in professional installations. Connection is via spring terminals on rear. Aluminium grille & stainless steel hardware offer rust free performance in even the most demanding environments. |
|
C0939 |
|
- Horizontal or vertical mounting
- Ball joint angle adjustment
- Dual 4” woofer drivers with 3/4” titanium dome tweeter
- Ideal for BGM & general sound reinforcement
- Stylish glossy finish & enclosure design for upmarket bars, boutiques and venues
- Available in 8 ohm or 100V line multi-tap versions.
|
|
These stylish wall speakers deliver high quality sound for music and sound reinforcement. Ideal for entertaining areas at home or boutiques, cafes, pubs & clubs in professional installations. Connection is via spring terminals on rear. Aluminium grille & stainless steel hardware offer rust free performance in even the most demanding environments. |
|
C2070 |
|
- Power rating: 30W RMS
- Power taps (100V): 15 & 30W
- SPL 1W @ 1m: 100dB
- SPL Max @ 1m: 115dB
- Frequency response: 130Hz - 18kHz
- Dimensions: ≈360W x 165H x 275D mm
- Colour: Grey
- Weight: ≈3.1kg
- Connection details:
- Black Common
- White 30W tap (330 ohms)
- Green 15W tap (670 ohms)
|
|
A high performance weatherproof music horn for use in installations requiring a high output speaker for BGM programming and paging playback. |
|
A4911 |
|
- 2 inputs to 1 output
- Suitable for mic or line signals
- Input 1 vox mutes input 2
- Separate controls for volume and vox sensitivity
- Vox operated 24V dc output for control of external devices
- Compact design
- 24V dc operation via 2.1mm dc jack (power supply sold separately)
- Dimensions: 25H x 105W x 81D mm
|
|
This compact 2 input mixer which accepts either a line level signal or balanced microphone signal for each input. The output signal is suitable for feeding an amplifier with either a line level input or balanced microphone input. Input one will vox mute i |
|
A4932 |
|
- Input Mic Level Sensitivity: 3mV
- Input Line Level Sensitivity: 1V
- Music Input Line Level Sensitivity: 200mV
- Output Connector: RJ45 8P8C
- Input Connectors (Audio): 3 pin XLR balanced, 2 x RCA, 3.5mm JACK
- Dimensions: ~133W x 65D x 44H
- Weight: ~0.2 kg
|
|
This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub. |
|
C2058 |
|
|
|
Ceiling Mount Version - See C 2054 for wall mount
Constructed from galvanised mesh this enclosure has been designed to protect the enclosed horn/speaker from physical damage or theft. The robust design makes it ideal for use in schoolyards, unde |
|
C8893B |
|
- Compact & lightweight
- Fitted with 3 pin mini XLR socket
- On / Off / Mute switch
- Gain control
- Switchable impedance between mic & instrument pickup
- Requires 2 x AA batteries (either alkaline or rechargeable).
- Note: Beltpacks are not supplied with a mic. Lapel mic to suit is C 8907.
|
|
Beltpack transmitter ideal for use with the Redback 700 channel receiver unit (C 8890B). |
|
A4568 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
Designed to interface the A4567 Line monitoring unit with a fire indicator board. The addition of the A4568 enables you to monitor the status of each individual zone. |
|
A4931 |
|
- Input Mic Level Sensitivity: 3mV
- Input Line Level Sensitivity: 1V
- Music Input Level Sensitivity: 500mV
- Output Connector: RJ45 8P8C
- Input Connectors: Audio: 3 pin XLR balanced 2 x RCA, 3.5mm JACK
|
|
This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub. |
|
A5138 |
|
- Input Mic Level Sensitivity: 3mV
- Output Connector: RJ45 8P8C
- Input Connector: 5 pin XLR balanced
|
|
The A5138 UTP wall plate has a standard 5 Pin XLR connector for connection of microphones with PTT switches. |
|
A4931V |
|
- Input Mic Level Sensitivity: 3mV
- Input Line Level Sensitivity: 1V
- Music Input Level Sensitivity: 500mV
- Output Connector: RJ45 8P8C
- Input Connectors: Audio: 3 pin XLR balanced 2 x RCA, 3.5mm JACK
|
|
This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub. |
|
C0356 |
|
- Impedance: 250Ω
- Sensitivity: -65dB ±2dB
- Frequency Response: 30Hz-20KHz
- Pattern: Cardioid
- Cable Length: 6m
|
|
This cardioid microphone is designed to be mounted from ceilings in installations such as churches where greater noise isolation is required. Low profile design and flexible cable hanger provide for diverse mounting options and minimum visibility. Phant |
|
C0351A |
|
- Insert: Electret
- Impedance: 250Ω balanced
- Sensitivity: -52dB ±3dB
- Frequency response: 30Hz - 18kHz
- Polar pattern: Cardioid/Fig 8/Omni/Variable
- Dimensions: 100L x 93W x 26Hmm
|
|
This boundary microphone is designed to be surface mounted and is fitted with a high sensitivity electret insert. The sturdy diecast case and steel grille offers robust protection, while the rubber base plate minimises vibration pickup. A front panel on/o |
|
A4489A |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
The A4489A zone relay unit may be installed remotely and has been designed to switch either low level inputs or amplifier outputs and interfaces the A4660 paging console with existing PA systems. Suits for line level or 100V line zone switching. |
|
A4469 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
The A4469 zone relay unit may be installed remotely and has been designed to switch either low level inputs or amplifier outputs and interfaces the A4660 paging console with existing PA systems. |
|
A6507 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
This compact module includes a seven step 100V line speaker attenuator/volume control which can be remotely adjusted via RS 485 serial control. |
|
C0903 |
|
- 3.5" high efficiency woofer driver.
- Mylar dome tweeter.
- Contoured profile with adjustable wall bracket.
- Recessed gold plated banana connection to speaker cabling.
- IP54 rated sealed enclosure.
- Marine grade rust free aluminium mounting brackets.
- Rust free aluminium grille.
- Industrial strength powdercoated bracket.
|
|
These wall mount music speakers feature exceptional sound quality for both domestic and commercial applications, such as theatre surround or bookshelf speakers, and PA sound reinforcement. |
|
C0902 |
|
- 3.5" high efficiency woofer driver.
- Mylar dome tweeter.
- Contoured profile with adjustable wall bracket.
- Recessed gold plated banana connection to speaker cabling.
- IP54 rated sealed enclosure.
- Marine grade rust free aluminium mounting brackets.
- Rust free aluminium grille.
- Industrial strength powdercoated bracket.
|
|
These high power Redback Bookshelf Series music speakers feature exceptional sound quality for professional sound reinforcement. They offer a stylish contoured profile together with a quick mounting bracket that virtually disappears once mounted. Connect |
|
C0946 |
|
- Impedance: 8Ω
- 100V Power taps: 5, 10, 20, 30W
- SPL 1W @ 1m: 88dB @ 1kHz ±2dB
- Freq response: 65Hz - 22kHz
- Weight: 1.8kg ea
- Dimensions (mm): 261H x 160W x 156D (172 including bracket)
|
|
Offers the flexibility for 8 ohm domestic use or 100V line for commercial installations.
These stylish wall speakers deliver high quality sound for music and sound reinforcement in both domestic and commercial installations. Ideal for entertaini |
|
C0992 |
|
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion.
- High performance large voicecoil diameter
- Wide frequency response
- Titanium diaphragm compression driver
|
|
Available in sizes from 8" to 15", these speakers are housed in rugged wedge shaped nylon fibre and ABS moulded cabinets. Designed with portability in mind. |