Search Results 141 products found 129 deleted products found
| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
15 + 15 PCB 10VA Toroidal TransformerM4330A |
|
| Toroidal transformers provide a higher output compared to traditional E-I transformers of a similar physical size. They have substantially reduced radiated hum and electrical noise, generate less heat and have much better regulation making them ideal for | |
 |
12 + 12 PCB 30VA Toroidal TransformerM4624A |
|
| Toroidal transformers provide a higher output compared to traditional E-I transformers of a similar physical size. They have substantially reduced radiated hum and electrical noise, generate less heat and have much better regulation making them ideal for | |
 |
12 + 12 PCB 10VA Toroidal TransformerM4324A |
|
| Toroidal transformers provide a higher output compared to traditional E-I transformers of a similar physical size. They have substantially reduced radiated hum and electrical noise, generate less heat and have much better regulation making them ideal for | |
 |
15 + 15 PCB 30VA Toroidal TransformerM4630A |
|
| Toroidal transformers provide a higher output compared to traditional E-I transformers of a similar physical size. They have substantially reduced radiated hum and electrical noise, generate less heat and have much better regulation making them ideal for ideal for high performance, low noise circuits. | |
 |
12-30V / 240V 100VA EI Core TransformerM2170C NEW |
|
| Powertran EI-Core 240V AC mains transformer with 6A dual multi tapped secondary configuration. Two sets of 0V, 12V and 15V secondaries are available at a maximum current of 6A (max current when secondaries connected in parallel) . Primary is fitted with 200mm flyleads. Secondary taps have solder tags. Fully electrical authority approved for AS/NZS | |
 |
7VA Compact 6V+6V PCB TransformerM7152 ROHS |
|
| Physical dimensions compatible with Arlec/Stadium series Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer. | |
 |
3 Pin XLR Male to 3 Pin XLR Female Adapter...P0973 ROHS |
| Includes transformer for switching between 50kohm high impedance and 600ohm low impedance. | ||
 |
12.5V / 240V 1A EI Core TransformerM2152 |
|
| Powertran EI-Core 240V AC mains transformer with 1A centre tapped secondary configuration. 6.25V and 12.5V secondary voltages available at 1A current output. Primary and secondaries fitted with 200mm flyleads. Fully electrical authority approved for AS/NZS 61558.2.6. | |
 |
12.5V / 240V 1A EI Core TransformerM2152C NEW |
|
| Powertran EI-Core 240V AC mains transformer with 1A centre tapped secondary configuration. 6.25V and 12.5V secondary voltages available at 1A current output. Primary and secondaries fitted with 200mm flyleads. Fully electrical authority approved for AS/NZS 61558.2.6. | |
 |
24V / 240V 3A EI Core TransformerM2158C NEW |
|
| Powertran EI-Core 240V AC mains transformer with 3A single tap secondary configuration. 24V secondary voltage available at 3A current output. Primary and secondaries fitted with 200mm flyleads. Fully electrical authority approved for AS/NZS 61558.2.6. | |
 |
9-24V / 240V 60VA EI Core TransformerM2165C NEW |
|
| Powertran EI-Core 240V AC mains transformer with 6.6A dual multi tapped secondary configuration. Two sets of 0V, 9V and 12V secondaries are available at a maximum current of 6.6A (max current when 9V secondaries connected in parallel) . Primary is fitted with 200mm flyleads. Secondary taps have solder tags. Fully electrical authority approved for A | |
 |
12.6V / 240V 500mA Centre Tapped EI Core ...M2853L |
|
| Primary and secondary fitted with 200mm fly leads. | |
 |
12.6V / 240V 300mA Centre Tapped EI Core ...M2852L |
|
| Primary and secondary fitted with 200mm fly leads. | |
 |
12.6V / 240V 150mA Centre Tapped EI Core T...M2851C NEW |
|
| Primary and secondary fitted with 200mm fly leads. | |
 |
12.6V / 240V 300mA Centre Tapped EI Core ...M2852C NEW |
|
| Primary and secondary fitted with 200mm fly leads. | |
 |
12.6V / 240V 500mA Centre Tapped EI Core ...M2853C NEW |
|
| Primary and secondary fitted with 200mm fly leads. | |
 |
600 Ohm / 600 Ohm Bridging Input TransformerM0709 ROHS |
| Impedance: 600Ω / 600Ω Freq. response: 20Hz - 30kHz Insertion loss: -0.5dB Max level: +20dBm @ 20Hz Weight: 63g | ||
 |
24V / 240V 5A EI Core TransformerM2190L |
|
| Primary fitted with 200mm fly leads. Secondary taps have solder tags. | |
 |
24V / 240V 5A EI Core TransformerM2190C NEW |
|
| Powertran EI-Core 240V AC mains transformer with 5A single tap secondary configuration. | |
 |
24V / 240V 150mA Centre Tapped EI Core Tra...M2854L |
|
| Primary and secondary fitted with 200mm fly leads. | |
 |
24V / 240V 150mA Centre Tapped EI Core Tra...M2854C NEW |
|
| Primary and secondary fitted with 200mm fly leads. | |
 |
600 Ohm / 600 Ohm Telephone Isolation Tran...M1000 ROHS |
| Impedance: 600 Ohm line, 600 Ohm equip Turns Ratio: 1:1 Max Level: 0dBm @ 300Hz Insertion Loss: 1dB max @ 0dBm Frequency Response: 300Hz - 10kHz Return Loss: >15dB, 300Hz - 5kHz Max Unbalanced DC: 60mA Proof Test: 3.5kV RMS Dimension: 41L x 30H x 33W Weight: 153 gms PCB hole size: 1.5mm | ||
 |
600 Ohm / 600 Ohm Mini Telephone Isolation...M1020 ROHS |
| Impedance: 600 Ohm line, 600 Ohm equip. Turns Ratio: 1:1 Max Level: 0dBm Insertion Loss: 1.4dB max @ 1kHz Return Loss: >16dB @ 300Hz - 3.5kHz Proof Test: 3.0kV AC 1 minute Dimension: 12L x 11H x 11W Weight: 5 gms PCB hole size: 0.7mm | ||
 |
600 Ohm / 600 Ohm Potted Telephone Isolati...M1015 ROHS |
| Impedance: 600 Ohm line matching Turns Ratio: 1:1 Insertion Loss: 4.7dB max @ 2kHz Frequency Response: 200Hz - 4kHz Return Loss: >15dB @ 200Hz - 4kHz Proof Test: 5.5kV RMS Max Unbalanced DC: 100µA Dimension: 18L x 14H x 18W Weight: 13 gms PCB hole size: 0.7mm | ||
 |
600 Ohm / 600 Ohm Mini Telephone Isolation...M1005 ROHS |
| Impedance: 600 Ohm line, 600 Ohm or 150 Ohm equip. Turns Ratio: 1:1 Max Level: +20dBm @ 200Hz Insertion Loss: 1dB max @ 0dBm Frequency Response: 200Hz - 3KHz Return Loss: >15dB, 200Hz - 3kHz Max Unbalanced DC: 5mA Proof Test: 3.5kV RMS Dimension: 26L x 21H x 19W Weight: 25 gms PCB hole size: 1.3mm | ||
 |
600 Ohm / 600 Ohm Low Prof Telephone Isola...M1010 ROHS |
| Impedance: 600 Ohm line, 600 Ohm or 150 Ohm equip. urns Ratio: 1:1 Max Level: +20dBm @ 200Hz Insertion Loss: 1.8dB max @ 0dBm Frequency Response: 300Hz - 3kHz Return Loss: >15dB, 300Hz - 3kHz Max Unbalanced DC: 80mA Proof Test: 3.5kV RMS Dimension: 35L x 17H x 29W Weight: 50 gms PCB hole size: 1.2mm | ||
 |
MDR-60-24 60W 24VDC 2.5A DIN Rail Switchmo...M8409A |
|
| The Mean Well MDR-60-24 provides 24VDC 2.5A output with a rated power output of 60W. The compact enclosure is easy to wire with recessed terminals. Each Mean Well power supply includes protection from short circuit, over load and over voltage conditions to protect the supply and connected equipment from damage. | |
 |
EDR-120-12 120W 12VDC 10A DIN Rail Switchm...M8406A |
|
| The Mean Well EDR-120-12 provides 12VDC 10A output with a rated power output of 120W. The compact enclosure is easy to wire with recessed terminals. Each Mean Well power supply includes protection from short circuit, over load and over voltage conditions to protect the supply and connected equipment from damage. | |
 |
HDR-60-12 60W 12VDC 4.5A DIN Rail Switchmo...M8394 |
|
| The Mean Well HDR-60-12 is a 60W DIN rail mountable power supply with a DC output voltage of 12V. The design is ideal for lower current DC power applications in a standardised DIN rail housing to suit mounting to asymmetrical “G” or 35mm top hat type DIN rails. | |
 |
HDR-60-24 60W 24VDC 2.5A DIN Rail Switchmo...M8395 |
|
| The Mean Well HDR-60-24 is a 60W DIN rail mountable power supply with a DC output voltage of 24V. The design is ideal for lower current DC power applications in a standardised DIN rail housing to suit mounting to asymmetrical “G” or 35mm top hat type DIN rails. | |
|
EDR-120-48 120W 48VDC 2.5A DIN Rail Switch...M8414A |
|
| The Mean Well EDR-120-48 provides 48VDC 2.5A output with a rated power output of 120W. The compact enclosure is easy to wire with recessed terminals. Each Mean Well power supply includes protection from short circuit, over load and over voltage conditions to protect the supply and connected equipment from damage. Suitable for mounting to DIN rail T | |
 |
HDR-30-12 24W 12VDC 2A DIN Rail Switchmode...M8392 |
|
| The Mean Well HDR-30-12 is a 24W DIN rail mountable power supply with an output voltage of 12V. The ultra-slim design is ideal for lower current DC power applications in a standardised DIN rail housing to suit mounting to asymmetrical “G” or 35mm top hat type DIN rails. Each unit measures only 90mm high and is supplied in 35mm and 52.5mm widths. | |
 |
HDR-30-24 36W 24VDC 1.5A DIN Rail Switchmo...M8393 |
|
| The Mean Well HDR-30-24 is a 36W DIN rail mountable power supply with an output voltage of 24V. Th ultra-slim design is ideal for lower current DC power applications in a standardised DIN rail housing to suit mounting to asymmetrical “G” or 35mm top hat type DIN rails. Each unit measures only 90mm high and is supplied in 35mm and 52.5mm widths. | |
 |
EDR-120-24 120W 24VDC 5A DIN Rail Power Su...M8410A |
|
| The Mean Well EDR-120-24 provides 24VDC 5A output with a rated power output of 120W. The compact enclosure is easy to wire with recessed terminals. Each Mean Well power supply includes protection from short circuit, over load and over voltage conditions to protect the supply and connected equipment from damage. | |
 |
MDR-60-12 60W 12VDC 5A DIN Rail Switchmode...M8405A |
|
| The Mean Well MDR-60-12 provides 12VDC 5A output with a rated power output of 60W. The compact enclosure is easy to wire with recessed terminals. Each Mean Well power supply includes protection from short circuit, over load and over voltage conditions to protect the supply and connected equipment from damage. | |
 |
30W 5V/6A Mini Screw Terminal Power SupplyM8418 |
|
| The Mean Well IRM-30-5ST 30W miniature AC-DC power supply is ready to be soldered onto the PCB boards of various kinds of electronic instruments or industrial automation equipment. | |
 |
30W 12V/2.5A Mini Screw Terminal Power SupplyM8420 |
|
| The Mean Well IRM-30-12ST 30W miniature AC-DC power supply is ready to be soldered onto the PCB boards of various kinds of electronic instruments or industrial automation equipment. | |
 |
Balanced To Unbalanced Converter XLR-RCA /...A2515 NEW |
|
| Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control (or optional screw terminal connections). | |
 |
Unbalanced To Balanced Converter XLR-RCA /...A2516 NEW |
|
| Unbalanced 10K Ohm 2 x RCA to balanced 600 Ohm 3 pin male XLR (or optional screw terminal connections) with level control. | |
 |
MDR-60-24 60W 48VDC 1.25A DIN Rail Switchm...M8413A |
|
| The Mean Well MDR-60-48 provides 48VDC 1.25A output with a rated power output of 60W. The compact enclosure is easy to wire with recessed terminals. Each Mean Well power supply includes protection from short circuit, over load and over voltage conditions to protect the supply and connected equipment from damage. | |
 |
Stereo to Mono RCA AdapterA2518 NEW |
| This unit is designed to convert stereo audio signals into a summed mono line level RCA signal. |
