|
Description |
Downloads |
Specs |
Ordering |
|
 |
C0951A |
|
- Durable extruded aluminium housing.
- 22uf bipolar line monitoring capacitor
- Attractive slimline construction.
- Fitted with high specification drivers for exceptional speech & music reproduction.
- Suitable for accurate, “long throw” applications.
- Water protected to IEC529 IP66, suitable for indoor and outdoor use.
- Durable aluminium alloy multi bracket (tested up to 1500 kgf).
|
|
Now fitted with 22uF bipolar capacitor for line monitoring use. These stylish, compact column speakers utilise multiple 3.5" (89mm) woofers and high power dome tweeters to produce superb clarity for both music and speech applications. |
 |
C0957A |
|
- Durable extruded aluminium housing.
- 22uf bipolar line monitoring capacitor
- Attractive slimline construction.
- Fitted with high specification drivers for exceptional speech & music reproduction.
- Suitable for accurate, “long throw” applications.
- Water protected to IEC529 IP66, suitable for indoor and outdoor use.
- Durable aluminium alloy multi bracket (tested up to 1500 kgf).
|
|
These stylish, compact 100V line column speakers utilise multiple 3.5” (89mm) woofers and high power dome tweeters to produce superb clarity for both music and speech applications |
 |
C0990 |
|
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion.
- High performance large voicecoil diameter
- Wide frequency response
- Titanium diaphragm compression driver
|
|
Available in sizes from 8" to 15", these speakers are housed in rugged wedge shaped nylon fibre and ABS moulded cabinets. Designed with portability in mind. |
 |
C0991A |
|
- Bluetooth audio
- FM radio
- USB playback
- Rugged moulded ABS construction
- Standard magnet-driven woofer for low distortion
- High performance large voice-coil diameter
- Wide frequency response
- Titanium diaphragm compression driver
- 4 inbuilt rigging points allow the units to be suspended using eye bolts
- Inbuilt top hat mount and carry handle
- Mic Level input <5mV, Line Output 250mV
|
|
This 200mm 8 Inch 2 Way Powered PA Speaker MP3/BT/FM/USB is housed in rugged wedge shaped nylon fibre and ABS moulded cabinet. |
 |
C0992 |
|
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion.
- High performance large voicecoil diameter
- Wide frequency response
- Titanium diaphragm compression driver
|
|
Available in sizes from 8" to 15", these speakers are housed in rugged wedge shaped nylon fibre and ABS moulded cabinets. Designed with portability in mind. |
 |
C0993 |
|
- Bluetooth audio
- FM radio
- USB playback
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion
- Inbuilt top hat mount and carry handle
- Wide frequency response
- Titanium diaphragm compression driver
- 4 rigging points
- Built-in MP3 player with USB and SD card inputs
|
|
Instant, powerful PA sound! An all in one portable PA sound system with amplifier that sets up in just seconds - no expertise required. Just plug into 240V power, switch it on and connect a mic. USB playback makes it easy to play your favourite tunes. Great for clubs, sports events, fetes, carnivals and bingo nights - any crowd up to 500 people! |
 |
C0993A |
|
- Rugged moulded ABS construction
- Standard magnet-driven woofer for low distortion
- High performance large voice-coil diameter
- Wide frequency response
- Titanium diaphragm compression driver
- 4 inbuilt rigging points allow the units to be suspended using eye bolts
- Inbuilt top hat mount and carry handle
- Mic Level input <5mV, Line Output 250mV
|
|
This 10 Inch 2 Way Powered PA Speaker with MP3/Bluetooth/FM/USB is housed in rugged wedge shaped nylon fibre and ABS moulded cabinet. Designed with portability in mind the cabinets include an inbuilt carry handle. |
 |
C0994 |
|
- 2 x Balanced XLR mic input
- 1 x Balanced 6.35mm jack mic input
- TRS 6.35mm stereo jack line input
- USB input for digital audio playback
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion
- Inbuilt top hat mount and carry handle
- Wide frequency response
- Titanium diaphragm compression driver
- Built-in MP3, WAV, WMA file player with USB input
|
|
A high powered active speakers series identical in performance and construction to the unpowered units, each include a self-contained power amplifier. Simply connect 240VAC power and a thumbdrive. |
 |
C0995 |
|
- 2 x Balanced XLR mic input
- 1 x Balanced 6.35mm jack mic input
- TRS 6.35mm stereo jack line input
- USB input for digital audio playback
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion
- Inbuilt top hat mount and carry handle
- Wide frequency response
- Titanium diaphragm compression driver
- Built-in MP3, WAV, WMA file player with USB input
|
|
A high powered active speakers series identical in performance and construction to the unpowered units, each include a self-contained power amplifier. Simply connect 240VAC power and a thumbdrive. |
 |
C1005 |
|
|
|
Black powdercoated steel bracket specifically designed to suit the C1004A club speaker. Comes included with the required hardware to mount the speaker to the bracket. |
 |
C1050 |
|
- Power Taps: 5, 10 & 15 W
- SPL 1W @ 1m: 91dB
- Freq. Resp.: 80Hz - 20kHz
- Weight: 1.8kg
- Colour: White
- Material: ABS Plastic
- Cable Length: 4M
- Overall Diam.: 190mm approx.
|
|
Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. Installation requires a single fixing with connection concealed within t |
 |
C1051 |
|
- Power Taps: 5, 10 & 15 W
- SPL 1W @ 1m: 91dB
- Freq. Resp.: 80Hz - 20kHz
- Weight: 1.8kg
- Colour: White
- Material: ABS Plastic
- Cable Length: 4M
- Overall Diam.: 190mm approx.
|
|
Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. Installation requires a single fixing with connection concealed within t |
 |
C1055 |
|
- Power Taps: 8Ω, 5, 10, 15, 20, 30W
- SPL 1W @ 1m: 91dB
- Freq. Resp.: 100Hz - 20kHz
- Weight: 3kg
- Colour: White
- Material: ABS Plastic
- Cable Length: 5M
- Overall Diam.: 260mm approx.
- Power Tap Cable Colours:
- Red: Common
- White: 30W
- Blue: 20W
- Yellow: 15W
- Green: 10W
- Brown: 5W
- Black: 8 Ohm
|
|
Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. Installation requires a single fixing with connection concealed within th |
 |
C1055A |
|
- Power Taps: 8Ω, 10, 15, 20, 30W
- SPL 1W @ 1m: 91dB
- Freq. Resp.: 100Hz - 20kHz
- Weight: 3kg
- Colour: White
- Material: ABS Plastic
- Cable Length: 5M
- Overall Diam.: 260mm approx.
- Power Tap Cable Colours:
- Red: Common
- White: 30W
- Blue: 20W
- Yellow: 15W
- Green: 10W
- Brown: 8 Ohm
|
|
Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. |
 |
C1057 |
|
- Power Taps: 5, 10, 15, 20, 30W, 8Ω
- SPL 1W @ 1m: 90dB
- Freq. Response: 70Hz - 20kHz
- Sound dispersion: 135º conical
- Weight: 2.1kg
- Colour: White
- Material: ABS Plastic
- Cable Length: 3M
- Dimensions: Ø185mm x 230mm
|
|
Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. |
 |
C1058
|
|
- Power Taps: 5, 10, 15, 20, 30W, 8Ω
- SPL 1W @ 1m: 90dB
- Freq. Response: 70Hz - 20kHz
- Sound dispersion: 135º conical
- Weight: 2.1kg
- Colour: White
- Material: ABS Plastic
- Cable Length: 3M
- Dimensions: Ø185mm x 230mm
|
|
Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. |
 |
C1060 |
|
- 100V line or 8 Ohm operation
- Wide frequency response
- High speech intelligibility
- Fitted with 2m cable
- Stylish modern finish
- 6.5” coaxial speaker
- Ideal for BGM and paging requirements
|
|
A stylish pendant speaker for installations requiring a high power SPL output. Ideally suited to high raked, suspended, concrete or exposed ceilings. Installation requires a single fixing with connection concealed within the ceiling rose provided. Fitted with 6.5" coaxial 2 way driver and high efficiency transformer. |
 |
C1060A |
|
- 100V line or 8 Ohm operation
- Wide frequency response
- High speech intelligibility
- Fitted with 2m cable
- Stylish modern finish
- 6.5” coaxial speaker
- Ideal for BGM and paging requirements
|
|
Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. |
 |
C1061 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 112 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP56 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 60W / 30W / 15W / 7.5W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 5.25-inch woofer and 1-inch tweeter for PA sound projection. |
 |
C1062 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 112 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP56 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 60W / 30W / 15W / 7.5W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 5.25-inch woofer and 1-inch tweeter for PA sound projection. |
 |
C1063 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 116 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP55 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 150W / 75W / 38W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 8-inch woofer and 1-inch tweeter for PA sound projection. |
 |
C1064 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 116 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP55 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 150W / 75W / 38W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 8-inch woofer and 1-inch tweeter for PA sound projection. |
 |
C1065 |
|
- Rated power: 240W @ 4Ω
- Power taps: 60, 120, 240W
- Max SPL: 112dB
- Freq response: 30Hz - 15Khz
- Weight: 7.5kg
- Dimensions (mm): 367 x 330Dmm
|
|
High power commercial grade 10" subwoofer for providing additional low end response to foreground music and hi-fi applications. |
 |
C1070 ROHS
|
|
- Driver Size: 165mm (6.5") coaxial
- Power Taps: 7, 15 & 35W
- SPL 1W @ 1m: 92dB
- Frequency Resp.: 80Hz - 16kHz, ±6dB
- Coverage: 180° Vertical, 360° Horizontal
- Weight: 4kg
- Material: Structural Polystyrene
- Operating temperature: -25°C to 70°C
- Dimensions: 380W x 290H mm
|
|
Now supplied with 22uF capacitor for line monitoring, plus screw terminals for easy installation. |
 |
C1075 ROHS
|
|
|
|
Flush mount ceiling bracket for C 1070 |
