|
Description |
Downloads |
Specs |
Ordering |
|
 |
C2270 NEW
|
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Stylish finish with powdercoated steel grille.
- White RAL9003 mesh grille.
- Low profile design is only 70mm deep (penetrates ceiling by only 58mm with 12mm thickness ceiling tile).
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way pluggable wire protect terminal for loop in, loop out wiring.
- Integral cable channel in rear housing for easy running of connection cables.
- Fitted with flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- 5 year warranty.
|
|
Approved for AS ISO7240.24 installations. We’ve refined the One-Shot even further with the new V2 One-Shot fire speaker. |
 |
C2161A |
|
- Designed to meet Australian Standard AS ISO7240.24
- Press to fit rubber push through grommet.
- Excellent speech intelligibility
- Low profile design is only 65mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Version of C 2161 with rubber grommets instead of cable glands. Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2170. At only 65mm overall height, these models are ideal for low profile ceiling spaces. |
 |
C2172 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Designed to meet AS ISO 7240.24:2018. Considerable development and has been put into this fire announcement system approved version of our popular One-Shot 'Rat-Trap' speaker. Flame retardent design with tuned PA driver to suit the latest approval requirements. |
 |
C2260 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Stylish finish with rust free aluminium grille.
- White RAL9003 mesh grille.
- Low profile design is only 65mm deep - penetrates ceiling by only 53mm (with 12mm thickness ceiling tile).
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Designed to meet AS ISO7240.24:2018. Our first One-Shot speaker with a aluminium grille, this model has been designed for installations requiring a premium finish whilst still meeting the required fire standards. It can also be used for standard 100V PA/BGM installations. |
 |
C2161 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Low profile design is only 65mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2171. At only 65mm overall height, these models are ideal for low profile ceiling spaces. It features flame retardent housing material, sealed cable gland entries and a tuned PA driver to suit the new approval requirements. |
 |
C2271 NEW
|
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Stylish finish with powdercoated steel grille.
- Black RAL9004 mesh grille.
- Low profile design is only 70mm deep (penetrates ceiling by only 58mm with 12mm thickness ceiling tile).
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way pluggable wire protect terminal for loop in, loop out wiring.
- Integral cable channel in rear housing for easy running of connection cables.
- Fitted with flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- 5 year warranty.
|
|
Approved for AS ISO7240.24 installations. We’ve refined the One-Shot even further with the new V2 One-Shot fire speaker. |
 |
C1075 ROHS
|
|
|
|
Flush mount ceiling bracket for C 1070 |
 |
C2261 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Stylish finish with rust free aluminium grille.
- Black RAL9004 mesh grille.
- Low profile design is only 65mm deep - penetrates ceiling by only 53mm (with 12mm thickness ceiling tile).
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Designed to meet AS ISO7240.24:2018. Our first One-Shot speaker with a aluminium grille, this model has been designed for installations requiring a premium finish whilst still meeting the required fire standards. |
 |
C2188 |
|
- Power taps: 1.25, 2, 5, 10, 15 watts
- SPL 1W @ 1m: 92dB @ 1kHz ±3dB
- Freq response: 70Hz - 20kHz
- Terminal type: 2 way screw terminal block
- Grille Steel
- Ceiling cutout: 204mm Ø
- Mounting depth: 126mm
|
|
Features a magnetic fit 'edge to edge' steel grille for a near flush finish. |
 |
C2178 |
|
- Speaker driver: C 2120A
- Power Taps : 1.25, 2.5, 5, 10, 15 Watts
- Frequency Response: 45Hz-20kHz
- Resonant Frequency: 50Hz
- SPL 1W @ 1m: 91dB
- Terminal type: 4-way screw terminal & 22µF bipolar capacitor
- Grille: Aluminium
- Tweeter Voice Coil Ø: 13mm
- Driver Voice Coil Ø: 25mm
- Ceiling cutout: 238mmØ
- Mounting depth: 95mm
- Transformer cover: No
- Cable restraint: No
|
|
The C 2178 is a 200mm (8") high performance 45W coaxial speakers fitted with a 15W transformer. These stylish, high performance, architecturally unobtrusive speaker/grill combinations can be painted to match decor. Super easy to install with a 'Flip-Lock' |
 |
C2048 |
|
- Power Taps: 1.25, 2.5, 5, 7.5, 10W
- Sound Pressure Level: 105dB, 1W @ 1m, 115dB, 10W @ 1m
- Frequency. Response: 300Hz - 13kHz
- Dispersion Angle: 110°
- Flare Dimensions (mm): 180Ø x 270D
|
|
The REDBACK 10W plastic PA horn speaker is designed primarily for distributed paging systems where a high degree of speech articulation and program clarity is paramount. Ideal for general public address system requirements. |
 |
C2142 |
|
- Power rating: 15 watts
- Power taps: 1.25, 2.5, 5, 10, 15 watts
- SPL 1W @ 1m: 95dB @ 1kHz ±2dB
- Freq response: 80Hz- 12kHz
- Ceiling cutout: 246mm Ø
|
|
Specially engineered to deliver 100dB 1W/1m @ 1kHz for use in PA and fire evacuation systems where a high level of SPL and speech intelligibility is essential. Includes 15W 100V transformer, 4 way wire protect terminal block & 22μF bipolar capacitor. |
 |
C6115A |
|
- Rated power: 75W
- Throat Diameter: 25.4mm
- Impedance: 8 Ohm
- Power bandwidth: 1.0k-18kHz
- Sensitivity 1W @ 1m: 106dB
- Frequency Range: 1000~19kHz
- Minimum Impedance(Zmin): 5.8ohm
- Voice coil diameter: 51.2mm
|
|
For high power PA use. Incorporates industry standard mounting thread, aluminium voice coil former and titanium diaphragm. Standard 1" throat. |
 |
C2138 |
|
- Speaker driver: C 2120A
- Power Taps : 1.25, 2.5, 5, 10, 15 Watts
- Frequency Response: 45Hz-20kHz
- Resonant Frequency: 50Hz
- SPL 1W @ 1m: 91dB
- Terminal type: 4-way screw terminal & 22µF bipolar capacitor
- Tweeter Voice Coil Ø: 13mm
- Driver Voice Coil Ø: 25mm
- Ceiling cutout: 246mmØ
- Mounting depth: 94mm
- Transformer cover: No
- Cable restraint: No
|
|
Redback "One-Shot" speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. |
|
C2056 |
|
- Power Taps: 5, 7.5, 10, 15, 20W
- Sound Pressure Level: 108dB, 1W @ 1m, 121dB, 20W @ 1m
- Frequency. Response: 275Hz - 10kHz
- Dispersion Angle: 70°
- Flare Dimensions (mm): 212Ø x 285D
|
|
The REDBACK 20W plastic PA horn speaker is designed primarily for distributed paging systems where a high degree of speech articulation and program clarity is paramount. Ideal for paging and general public address requirements. |
 |
C2128 ROHS
|
|
- Speaker driver: C 2120A
- Power Taps : 1.25, 2.5, 5, 10, 15 Watts
- Frequency Response: 45Hz-20kHz
- Resonant Frequency: 50Hz
- SPL 1W @ 1m: 91dB
- Terminal type: 4-way screw terminal & 22µF bipolar capacitor
- Grille: Aluminium
- Tweeter Voice Coil Ø: 13mm
- Driver Voice Coil Ø: 25mm
- Ceiling cutout: 238mmØ
- Mounting depth: 95mm
- Transformer cover: No
- Cable restraint: No
|
|
The C 2128 is a 200mm (8") high performance 45W coaxial speakers fitted with a 15W transformer. These stylish, high performance, architecturally unobtrusive speaker/grill combinations can be painted to match decor. Super easy to install with a 'Flip-Lock' |
 |
CF0715 |
|
- Designed to meet AS ISO7240.24 standard for fire & evacuation warning systems
- Excellent speech intelligibility
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 2 way latching system reduces installation time.
- Fitted with 4 way wire protect terminal block for loop in, loop out wiring as required by Australian Standards.
- Fitted with supervisory capacitor for line monitoring.
- High impact fire retardant enclosure & grille.
- Australian designed & assembled.
- 5 year warranty.
|
|
The re & evacuation safety standard has changed to AS ISO 7240.24: 2018. This new standard will be implemented in new building projects. Redback is releasing this new range of horn and ceiling speakers to meet this standard to ensure re & evacuation installations in new buildings meet the required code. |
 |
C0720 |
|
- Power rating: 15 watts
- Power taps: 1.25, 2.5, 5, 10, 15 watts
- SPL 1W @ 1m: 95dB @ 1kHz ±2dB
- Freq response: 80Hz- 12kHz
- Connection: 4 way wire protect terminal & 22uF bipolar cap
- Dimensions: 310Ø x 85Hmm.
|
|
Super Fast Installation. Save Time & Money!
Saving valuable installation time the innovative One-Shot range is moulded from industrial grade, high impact polystyrene and designed to mount directly to the underside of concrete slabs or inacce |
 |
CF0716 |
|
- Rated Noise Power: 5 Watts (100V line)
- Power Taps & Impedance (100V line): 0.33W (30kΩ), 0.66W (15kΩ), 1.25W (8kΩ), 2.5W (4kΩ), 5W (2kΩ)
- Sensitivity: 93dB (1W@1M), 81dB (1W@4M)
- Maximum Sound Pressure Level: 101dB (5W@1M), 89dB (5W@4M)
- Frequency Response: 100 Hz - 15kHz; 500 - 4kHz O 8dB
- Coverage Angle (-6dB): 500 Hz: > 180 o , 1000Hz: 81o , 2000Hz: 93o , 4000Hz: 58o
- Environmental Type: A (for indoor applications as per standard)
- Speaker Component: 200mm (8”) paper cone speaker
- Mounting Method: Surface Attachment
- Line Monitoring: Yes, 22μF bipolar capacitor
- Applicable Cable: 2.5mm2 (14AWG) max conductor area
- Connection: 4 way screw terminal
- Finish:
- Black ABS grille and housing (Starex VH-0800)
- Black Flame retardant ABS spring clips (Cycoloy C2950HF)
- IP Rating: IP 21C
- Dimensions: 310Ø x 85mm
- Weight: 1.36kg
|
|
The re & evacuation safety standard has changed to AS ISO 7240.24: 2018. This new standard will be implemented in new building projects. Redback is releasing this new range of horn and ceiling speakers to meet this standard to ensure re & evacuation installations in new buildings meet the required code. |
 |
C2181 |
|
- Magnetic fit ‘edge to edge’ steel grille for a neat flush finish.
- High power output.
- Excellent speech intelligibility and music reproduction.
- Coaxial driver for excellent high end frequency response.
- Flip-lock mounting system reduces installation time.
- 5 year warranty.
|
|
The C 2181 is a 200mm (8") 8 amp Omega 45W coaxial speaker. These stylish, high performance, architecturally unobtrusive speaker/grill combinations can be painted to match decor. Super easy to install with a "Flip-Lock&" mounting system. Typical applications |
|
C2057 |
|
- Weather resistant
- UV stabilised plastic for long life even full sun
- Superb speech reproduction
- Excellent frequency response
- Emergency PA and EWIS compatible
|
|
The REDBACK 30W plastic PA horn speaker is designed primarily for distributed paging systems where a high degree of speech articulation and program clarity is paramount. Ideal for paging and general public address requirements. High power 30 watt model. |
 |
C0721 |
|
- Power rating: 15 watts
- Power taps: 1.25, 2.5, 5, 10, 15 watts
- SPL 1W @ 1m: 95dB @ 1kHz ±2dB
- Freq response: 80Hz- 12kHz
- Connection: 4 way wire protect terminal & 22uF bipolar cap
- Dimensions: 310Ø x 85Hmm.
|
|
Super Fast Installation. Save Time & Money!
Saving valuable installation time the innovative One-Shot range is moulded from industrial grade, high impact polystyrene and designed to mount directly to the underside of concrete slabs or inacce |
 |
C0990 |
|
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion.
- High performance large voicecoil diameter
- Wide frequency response
- Titanium diaphragm compression driver
|
|
Available in sizes from 8" to 15", these speakers are housed in rugged wedge shaped nylon fibre and ABS moulded cabinets. Designed with portability in mind. |
 |
C0988 |
|
- Input power (continuous): 35W RMS
- Impedance: 4 ohm
- Freq response: 80Hz-18kHz
- SPL 1W @ 1m: 86dB
- Max SPL: 104dB
- Dimensions: 285H x168W x 155D
- Weight: 3.6kg
|
|
Manufactured from tough polypropylene, these compact full range speakers are designed for use in a multitude of venues. They offer excellent performance in high fidelity, high power, foreground music applications. Engineered using sophisticated acoustic d |
 |
C0887 ROHS
|
|
- Dimensions: 189Ø x 110D.
- Power taps: 1.25, 2.5, 5 and 10W.
- Mounting cutout: 155mmØ.
|
|
Designed to withstand the physical abuse of vandals. Access to the 130mm +twin cone speaker requires the use of a security torx tool, minimising unauthorised tampering and/or theft. |
