|
Description |
Downloads |
Specs |
Ordering |
|
|
X2394 NEW
|
|
- 200 lumen light output.
- 3-4m motion detection range with 30 second on time.
- Can be used as a standard switch on/off light.
- Compact aluminium case
- USB type C recharging.
- Adhesive magnetic strip allowing easy recharging.
- Fantastic for kitchen cupboards, cabinetry etc.
- Use at home or in your camper/caravan.
- Makes a great reading light.
|
|
This USB rechargeable light is ideal as kitchen pantry, work bench or cupboard light thanks to its in-built PIR motion sensor (3-4m detection range). |
|
S9128B |
|
- 1/2.8"SONY Starvis Back-illuminated CMOS sensor
- AHD/CVI/TVI/CVBS 4 IN 1
- 2.7-13.5mm motorised Lens
- IR Distance max 30m
- IP66 outdoor, OSD & UTC support
|
|
This Vandal Resistant Vari-Focal IP66 Colour Dome Camera has been specifically designed for installation in applications where damage resistance is paramount eg bus or train stations, concourses, carparks etc. |
|
S9129A |
|
- Resolution: 2560H x 1440V. (4MP)
- Sensor: 1/3” CMOS
- Focal length: 2.8 - 12mm (manual)
- Min. Illumination: 0.01 Lux
- IR: 30m range (24 LEDs)
- Power requirement: 12V DC 700mA
- S/N Ratio: >50dB
- IP Rating: IP66
- Dimensions: 120Ø x 93Hmm
|
|
|
|
K6125 |
|
|
|
(SC June '11) The 'Versatimer' drives a 12V latching relay suitable for switching applications requiring a very low current drain. It also provides a battery discharge protection feature for use in designs with lead acid batteries. Plus an in-built |
|
H8967 |
|
|
|
Allows mounting of your Pi to the rear of a monitor using standard 100mm spacing VESA bolt holes. Made from laser cut acrylic plastic. Internal fan for added cooling. |
|
P5934 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with with a HD9 female VGA connector and 3.5mm audio. Supplied with two facia covers to suit your decor. |
|
P5930 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with with a HD9 female VGA connector and 3.5mm audio. Supplied with two facia covers to suit your decor. |
|
P6849A |
|
|
|
Plug Connection Type plates are designed for use with premade cables, reducing on-site installation time. No cable termination required! Wallplate fitted with HD9 female VGA connector, USB type A & 3.5mm audio on the front and rear of wallplate. Also fit |
|
P5947 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with VGA, 3.5mm audio & HDMI. Supplied with two facia covers to suit your decor. |
|
PB5947 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Type VGA Plates are fitted with HD9 female VGA connector, HDMI & 3.5mm audio. Supplied with both Clipsal and HPM style Front faceplates.
Black plate. |
|
P5956 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with HD9 female VGA, 3.5mm audio, three RCA connections & USB Type A. Supplied with two facia covers to suit your decor. |
|
P5954 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with HD9 female VGA, 3.5mm audio, three RCA connections & USB Type A. Supplied with two facia covers to suit your decor. |
|
P5952 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with HD9 female VGA, 3.5mm audio, three RCA connections & USB Type A. Supplied with two facia covers to suit your decor. |
|
P5958 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with HD9 female VGA, 3.5mm audio, three RCA connections & USB Type B. Supplied with two facia covers to suit your decor. |
|
P5946 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with VGA, 3.5mm audio & USB Type A. Supplied with two facia covers to suit your decor. |
|
P5945 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with with a HD9 female VGA connector and 3.5mm audio. Supplied with two facia covers to suit your decor. |
|
P5961 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with HD9 female VGA and three RCA connections. Supplied with two facia covers to suit your decor. |
|
P5925 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Type VGA Plates are fitted with a HD9 female VGA connector. Supplied with two facia covers to suit your decor. |
|
P5942 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with VGA, 3.5mm audio & USB connector. Rear connections are via back to back plugs. Supplied with two facia covers to suit your decor. |
|
P5920 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with VGA connector. Rear connections are via screw terminals. Supplied with two facia covers to suit your decor. |
|
P5940 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with VGA, 3.5mm audio & USB connector. Rear connections are via screw terminals. Supplied with two facia covers to suit your decor. |
|
P5944 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with VGA, 3.5mm audio & USB connector. Rear connections are via back to back plugs. Supplied with two facia covers to suit your decor. |
|
P5985 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Type VGA Plates are fitted with HD9 female VGA connector. Supplied with both Clipsal and HPM Front faceplates. |
|
P5982 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Screw Terminal Type VGA Plates are fitted with HD9 female VGA connector and 4 blank mech spaces for individual configuration. Includes PCB mounted HD9 female VGA connector for easy on-site termination. Supplied with both Clipsal and HPM Front faceplates.
|
|
P5980 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Screw Terminal Type VGA Plates are fitted with HD9 female VGA connector and 4 blank mech spaces. Includes PCB mounted terminal block connector. Supplied with two facia covers to suit your decor. |