| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
Cable Staples To Suit T2357 (4-6mm) PK200T2358 |
| Suits 4-6mm round cable or 2.5-4mm flat wire. Max width 8mm. | ||
 |
Crimptool Replacement Stripper Blades To S...T1564 |
| Replacement stripper blades for T1565A. | ||
 |
8 Way SMD Parts Storage CaseH0230 |
| Spring loaded tops. Includes 8 interlocking compartments that can be expanded to store as much as you need! Compartment size: 24.5x31x22mm. | ||
 |
7mm Glue Sticks 300mm 20pk To Suit T2937AT2939A |
| These glue sticks are for T2937A. | ||
 |
LCD Opening Suction Cup PliersT1499 |
| These suction cup pliers can be used to remove screens off tablets, smartphones and laptops. The suction cups rotate to allow for two sided (ie: phones over 4.7”) or single sided suction (ie: when removing computer screens) | ||
 |
Anti Static 3 Piece Tweezer SetT2376 |
|
| A durable high quality tweezer set made from nylon carbon fibre composite which is anti-static, antimagnetic, acid and alkali resistant. | |
 |
Box Cutter Utility KnifeT1485 |
| A toolbox essential. Uses standard utility knife blades. Diecast body and retractable blade. | ||
 |
0.5mm Round Tip To Suit T2090T2091 |
| 0.5mm round soldering iron tip to suit Micron T2090 soldering station. | ||
|
1mm Round Tip To Suit T2090T2092 |
| 1mm round soldering iron tip to suit Micron T2090 soldering station. | ||
|
2mm Chisel Tip to Suit T 2090T2093 |
| 2mm chisel soldering iron tip to suit Micron T 2090 soldering station. | ||
 |
3mm Hoof Tip To Suit T2090T2094 |
| 3mm hoof soldering iron tip to suit Micron T2090 soldering station. | ||
 |
No Clean Solder Flux Pen 12mlT1927 |
|
| No Clean Solder Flux Pen 12ml | |
 |
MC4 Style Solar Panel Connector Spanner SetT1615 |
| An installation tool that aids in tightening the weatherproof cable gland on each connector. | ||
 |
0.2mm Round Tip To Suit T2460 / T2460AT2462 |
| Tip to suit the T2460 / T2460A soldering irons. | ||
|
0.5mm Round Tip To Suit T2460 / T2460AT2463 |
| Tip to suit the T2460 / T2460A soldering irons. | ||
 |
1.6mm Chisel Tip To Suit T2460 / T2460AT2464 |
| Tip to suit the T2460 / T2460A soldering irons. | ||
 |
2.4mm Chisel Tip To Suit T2460T2465 |
| Tip to suit the T2460 Soldering Iron. | ||
 |
3.2mm Chisel Tip To Suit T2460 / T2460AT2466 |
| Tip to suit the T2460 / T2460A soldering irons. | ||
 |
8mm x 33m High Temperature Polyimide TapeT2971A |
| Offers high heat resistance and excellent dielectric strength. The tape removes cleanly without leaving a residue. Ideal for use in electrical insulation or masking circuit boards during wave soldering. 33m rolls. | ||
 |
PCB Holder Solder StandT1450A |
| Complete with dual clamps to hold PCBs, wire etc in place. | ||
 |
4 Piece Precision Tweezer SetT2374 |
| Kit includes reversible action (normally closed), curved needle point, curved flat point and straight needle point tweeters. | ||
 |
Isopropyl Alcohol 250mlT3035 |
| Isopropyl alcohol can be used as a universal cleaner for electronics equipment. Ideal for removing dust, buildup and marks on casings etc. As well as being a handy way to clean PCB surfaces when servicing. | ||
 |
3m Self Fusing Silicon TapeT2964A |
|
| This silicone tape is a multi-purpose, self-adhesive, permanent and waterproof black tape, ideal for carrying out emergency repairs as it creates an airtight seal once cured. | |
 |
Gasmate Butane Gas Canisters 4pk - Suits T...T2455 |
| 4 pack of gas to suit T2497. | ||
 |
Stubby Ratchet Driver KitT2191A |
| A handy ratchet driver for the car glovebox or tackling jobs around the house. Includes 7 driver bits in the handle, 3 flat blade, 3 phillips, 1 square drive. |
