|
Description |
Downloads |
Specs |
Ordering |
|
|
A3225 |
|
|
|
Transceiver for use with our A3224 multi-zone HDMI extender system. This unit not only acts as a receiver for the incoming signal from the A3224 transmitter but also retransmits the signal so it can be daisy chained with up to 6 additional screens. |
|
A3226 |
|
|
|
Receiver for use with the A 3224 HDMI Extender Kit and the A 3225 HDMI Extender Tranceiver. For multiple screens daisy chained from a single signal source use up to 6 tranceivers with a receiver at the very end. |
|
A3242 |
|
- Extends HDMI signals over distances up to 60m at 4k@ 60Hz 4:4:4 resolutions.
- HDMI 2.0, HDCP 2.2 HDCP 1.4 and DVI 1.0 compliant
- Supports 18Gbps bandwidth
- Supports one HDMI loop output
- Supports one-way IR pass-through
- Supports HDR function
|
|
Designed to extend HDMI signals over distances up to 60m across economical UTP cabling. |
|
A3242A |
|
- Transmit up to 70m under 4K@60Hz YUV4:4:4
- 1x HDMI loop out on transmitter
- Supports EDID management
- Supports wide band IR Pass through
- HDMI audio sampling rate up to 192KHz, max LPCM 7.1 channel
- Supports S/PDIF and PCM2.0 analog audio extraction
- Supports Dolby True HD, PCM and DTS-HD master audio
- Micro USB port to upgrade new firmware
- POC “Power Over Cable”. Only one power supply required per system
- Power from either Transmitter or Receiver end
|
|
This HDMI & One Way Infra-Red Cat6 Extender UTP Balun is designed to extend HDMI signals over distances up to 70m across economical UTP cabling. |
|
A3242B NEW
|
|
- HDMI 2.0b and HDCP 2.2 compliant
- Supports 18Gbps video bandwidth
- Supports video resolution up to 4K/2K@60Hz RGB/YCBCR 4:4:4
- The transmission distance can be extended up to 70m via a single CAT6/6a cable
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG
- Support bi-directional IR control signal pass-through
- Audio formats: LPCM 7.1, Dolby True HD, DTS HD Master
- EDID copy pass-through function between the source device and display device
- Support ARC and audio de-embedding, audio is output through the optical fibre port of the receiver
- Support bi-directional POC (Power over Cable) function
- Compact design for easy and flexible installation
|
|
This HDMI & One Way Infra-Red Cat6 Extender UTP Balun is designed to extend HDMI signals over distances up to 70m across economical UTP cabling. |
|
A3244B |
|
- HDBaseT single UTP
- Simultaneous HDMI, IR & RS-232 signal transmission
- HDCP compliant
- HDMI ARC and local audio extraction
- Transmitter or receiver unit can be powered via PoC
- Bi-directional IR transmission
- Supports 4K @ 60Hz 4:4:4 (70m max) when used with Cat6A/7
- Supports PCM2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX,DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD.
|
|
This HDBaseT UTP balun allows transmission of 4K HDMI signals up to 70m with full audio-return-channel (ARC) support and RS-232 control signals. |
|
A3245 NEW
|
|
- Extend both HDMI signal plus USB peripherals.
- Transmission up to 70m over Cat6/6a UTP cabling.
- Ideal for remote operation of PC equipment.
- HDMI 2.0b, HDCP 2.2 compliant.
- 18Gbps video bandwidth.
- EDID management.
- Includes transmitter & receiver.
- Supports USB 1.1 KVM pass-through.
|
|
This product is designed to extend HDMI signals over distances up to 70m using Cat6/6a cabling. In addition it also allows USB peripherals to control a connected computer from the receiver end. |
|
A3247 NEW
|
|
- Supports four 4K @ 60Hz sources.
- Combines up to four sources onto one display.
- RS-232 controllable via third party software.
- Audio extraction via S/PDIF & stereo RCA.
- HDMI 2.0b, HDCP 2.2/1.x compliant.
- 18Gbps video bandwidth.
- Up to 8 display modes.
- Seamless display switching.
- EDID management.
- Includes IR remote.
|
|
This product is designed for the purpose of connecting four 4K @ 60Hz UHD HDMI sources, and displaying each on a single display |
|
A3443B |
|
- HDMI 2.0, HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
- HDMI 2.0, HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
- Four 18G HDMI 2.0 video outputs support up to 4K60 444 resolution
- Four outputs can be individually scaled for 4K - 1080p
- De-embedded audio to analog L/R and Coaxial ports output
- ARC audio return to the coaxial ports output only
- Built-in Web GUI for TCP/IP control
- Advanced EDID management supported
- Four methods of control: Front panel, RS-232, IR remote and TCP/IP
- Compact design for easy and flexible installation
|
|
This 4x4 HDMI 2.0 18Gbps Matrix Switcher can switch any of these 4 HDMI 2.0 Sources to four HDMI 2.0 Displays. |
|
A3449B |
|
- HDCP 1.4 compliant
- HDMI 2.0b, HDCP 2.2 and HDCP 1.4 compliant
- Video resolution up to 4K2K@60Hz (YUV 4:4:4) on all HDMI ports
- Support 18Gbps video bandwidth
- DolbyVision, HDR10+ and HLG are supported.
- Support 4K->1080P Down Scaler for each output port
- HDMI audio pass-through up to 7.1CH HD audio (LPCM, Dolby TrueHD and DTS-HD Master Audio)
- Audio de-embedded is supported via analog and coax ports
- ARC, CEC and smart EDID management are supported
- 1U rack mounted design with front panel OLED display
- Control via front panel buttons, IR remote, RS-232, LAN and Web GUI
|
|
The 18Gbps 8x8 HDMI Matrix supports the transmission of video (up to 4K2K@60Hz YUV 4:4:4) and multi-channel high resolution digital audio from 8 HDMI sources to 8 HDMI displays. |
|
A3605 NEW
|
|
- Supports 4K @ 60Hz.
- As low as 100ms latency.
- Supports 20-60KHz IR remote extension.
- Supports USB KVM function.
- Up to 150m transmission line of sight.
- Auto channel selection.
- Equipped with 802.11ac 2T2R WiFi MIMO module.
- High-security protection.
- Supports one transmitter to multiple receivers.
- Supports HDCP2.2
|
|
This 4K wireless HDMI extender system supports 4K 60Hz resolutions with super smooth playback and low latency. You can now watch TV in your bedroom, study or any other room without messy cables. |
|
A3606 NEW
|
|
- General
- System Video Resolution: 4K60; 4K30; 4K24; 1080P60/50/30/24;1080i60/50; 720P/60/50/30 480P
- Audio: Stereo, 44.1KHz
- Wireless standard: IEEE 802.11b/g/n/ac, 2.4G/5GHz, 2T2R
- Latency: About 100ms latency
- HDMI Version: HDMI 2.0 with HDCP2.2
- Platform: supported Any devices that support HDMI Port
- Distance: ≈150m in the clear line of sight
- Receiver
- Interface: HDMI out x1; USB x 2; Type C x1
- LED: Blue LED x 1
- Power supply: DC5V/2.1A
- Power Consumption: About 5W
- Dimension: 154*77.5*21mm
- Weight: 330g
|
|
An additional receiver unit for the Dynalink A3605 4K wireless HDMI sender system. |
|
A3830B |
|
- Compliant with HDMI, HDCP 1.2 and DVI 1.0
- Supports HDMI audio sampling rate up to 192 kHz
- Supports Optical S/PDIF audio sampling rate up to 192 kHz
- HDMI supports high-bit-rate (HBR) audio
- No HDMI output connection is required to receive audio at the analog and optical outputs
- Supports 4 x 3.5mm phone jack for analog multi-channel audio outputs
- Maximum input and output HDMI cable length can run up to 15 meters at 1080p 8-bit resolution or 10 meters at 1080p 12-bit resolution
- Supports built-in audio EDID switching among LPCM 7.1CH, TV (external) EDID, and Bitstream audio
- Supports CEC bypass
- Supports 4Kx2K resolution and 3D signal
|
|
Allows you to split the audio stream from a HDMI signal into either S/PDIF optical or four analog stereo 3.5mm jack outputs - ideal for 7.1 multi-channel systems. |
|
A3832 |
|
|
|
Ideal for use in educational or boardroom environments, this handy converter box provides connection for devices with VGA/3.5mm audio, USB-C, Mini DisplayPort and HDMI connections and outputs to a HDMI equipped projector or display. |
|
A3833 |
|
- Allows 4 AV sources to be connected - analog AV, VGA+3.5mm audio, mini DisplayPort, HDMI and USB-C.
- Converts all inputs to HDMI output 4K/2K @ 60Hz.
- Charge device via USB type A or USB type C ports.
- Ethernet by-pass function
- Source auto-detect plus manual switch selection
- Includes power supply.
|
|
Ideal for use in educational or boardroom environments, this handy converter table box provides connection for AV devices with VGA/3.5mm audio, USB-C, Mini DisplayPort and HDMI connections and outputs to a HDMI equipped projector or display. |
|
P7352A |
|
- Length: 15cm
- 4K maximum resolution @ 60Hz
- Connects between USB C devices and external displays
|
|
This HDMI output adaptor is the perfect accessory for any USB C equipped device to output video signals to an external monitor or display. This adaptor will display up to 4K resolutions at 60Hz. 15cm long.
|
|
P7354A |
|
|
|
This lead adaptor converts a HDMI signal to VGA and splits the audio signal to a 3.5mm stereo jack output. This allows high quality video signals to be transmitted over greater distances. |
|
P7357 |
|
- Convert complete VGA signal into HDMI output.
- Support the exchange between digital signal and analog signal.
- Support HDCP 1.0/1.1/1.2.
- Quick installation, simple operation without setting driver.
- Built-in conversion chip, support hot-swapping.
- VGA video input formats: 640x480, 720x576, 800x600, 1024x768,1280x720, 1280x768, 1280x960,1280x1024,1360x768, 1366x768, 1400x1050, 1440x900, 1600x900, 1600x1200, 1680x1050, 1920x1080.
- HDMI video output formats:480i, 480p, 576i, 576p, 720p, 1080i, 1080p.
|
|
Converts VGA signal to HDMI. Ideal for connecting VGA equipment to modern HDMI monitors & televisions. Supports virtual 7.1ch audio over HDMI or 3.5mm stereo output. |