|
Description |
Downloads |
Specs |
Ordering |
|
 |
A1164 |
|
- Converts HD video and audio signals to digital COFDM DVB-T channel
- Foxtel approved
- Optimised 24mbps stream ideal for live sports viewing
- Pre-programmed Foxtel channel listing
- 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
- Full function front LCD for adjustments
- Web GUI interface for easy programming
- 2K/8K carriers
- Internal fan cooling system for long life span
- 1RU rack mountable
- Distributes on any new or existing RF cable
- Built in IR control allows TV locations to have IR control of AV equipment
|
|
Developed specifically for the commercial AV distribution market and the only Foxtel approved modulator on the market. Encodes four HDMI signals to any DTV channels, providing an easy way to distribute multiple high definition AV signals throughout buildings. |
 |
A1135 |
|
- Converts HD video and audio signals to digital COFDM DVB-T channel
- AVC (MPEG-4) encoding
- 1080P output
- Programmable; channel, network names and LCN
- Full function front LCD for adjustments
- Remote access and control GUI via web browser
- Emergency announcement system control (EAS) input
- Internal fan cooling system for long life span
- 2K/8K carriers
- 1RU rack mountable
- Distributes on any new or existing RF cable
- Built-in IR control allows TV locations to have IR control of AV equipment
|
|
This high definition, HDMI equipped, modulation system allows you to distribute any HD devices (Foxtel, DVD etc) in true HD around the home or business with ease. Each AV input can be assigned its own dedicated TV channel. |
 |
A1160 |
|
- Input
- Number of inputs: 1
- Video Input: HDMI
- Video Input Level: 0.7 - 1.4V (Peak to Peak)
- Video mode: PAL
- Audio input: Stereo
- Audio input level: 0.4 to 4.8V (Peak to Peak)
- Output
- Frequency Range: 177.5 MHz to 816.5 MHz (6 to 69)
- HDMI loop through: No
- Output level: 85dB
- MER: >38dB
- Delayed Audio
- Delayed audio output: No
- Delay: -
- Connection type: -
- Modulation
- Video Resolution: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
- Video compression: H.264 AVC (MPEG-4)
- Audio compression: MPEG Layer II / AAC
- Video bitrate SD: 1Mbps to 9Mbps (Default 5Mbps)
- Video bitrate HD: 12Mbps to 24Mbps (Default 24Mbps)
- LCN: AU (APN)
- Carrier: 2K/8K
- GI: 1/32
- FEC: 7/8
- Constellations: 16 QAM/64 QAM
- Management / Programming
- Front LCD: Yes
- Web GUI: Yes
- General
- Power supply type: External
- Power supply: 12VDC 1.5AMP
- Redundant PSU: No
- Operating temperature: 0°C to +45°C
- Storage temperature: 0°C to +60°C
- Dimensions: 236mm x 145mm x 34mm
- Weight: 0.88kg
|
|
Developed specifically for the commercial AV distribution market and the only Foxtel approved modulator on the market. Encodes HDMI signal to any DTV channel, providing an easy way to distribute AV signals throughout buildings. |
 |
A1125B |
|
- Video / Audio Input
- HDMI 2.0
- Connectors: Dual (One for Input ; One for Loop-through)
- Audio: Embedded PCM
- HDCP Compliance: 1.4 and 2.2
- Resolution: 4k/UHD/1080p/1080i/720p
- Output
- QAM
- Standard: DVB-T
- Connector: 1x “F” Female
- Frequency Range: 177.5MHz to 816.5MHz (Ch6-Ch69)
- Output Level: 85 dBμV Typical, (With 20dB Range Manually Adjustable)
- Flatness Across Full: ±2dB
- Band MER: 39 dB Typical
- Carrier (OFDM Mode): 2K/8K
- Guard Intervals: 1/32
- Code Rate (FEC): 7/8
- Modulation: 64-QAM
- Output Impedance: 75 ohm
- RF Output Return Loss: 10 dB Typical
- LCN: Embedded, Varies by Country Regulations
- Video/ Audio Encoding Profile
- Video
- Resolution: 1080p / 1080i / 720p
- Video Codecs: H.264
- Audio
- Audio Codecs: MPEG1 Layer II, MPEG4 AAC
- General
- Local Monitoring: LCD
- IR Emitter: Single
- Web GUI Supported: Firefox, Chrome, Safari
- Password Protected: GUI:User Settable
- Power Supply: 12VDC 1.5A
- Consumption: 6.5 Watts
- Operation Temperature: 0°C to +45°C
- Storage Temperature: 20°C to +70°C
- Dimension: 236mm x 145mm x 34mm
- Language: English
|
|
These 1 channel high definition, HDMI equipped, modulation systems will allow you to distribute any HD devices (Foxtel, DVD etc) in true HD around the home or business with ease. Both models are fitted with a HDMI loop through for local playback. |
 |
A1129A |
|
- 1080p modulated resolution
- HDMI 4K pass through
- H.264 video compression
- 30dB MER (typical)
- 100dB output level
- RF TV antenna input
- 177-858MHz frequency
- Includes power supply
|
|
A high performance HD modulator module able to generate a signal in DVB-T format (Digital Terrestrial Television) from HDMI input. |
 |
A1127A |
|
- 1080p modulated resolution
- HDMI loop through
- 1080 HDMI input
- H.264 video compression
- 30dB MER (typical)
- 100BuV ±5 output level
- RF TV antenna input
- 38-56kHz IR frequency
- 9V IR pass over RF
- Includes power supply
|
|
A high performance HD modulator for HDMI sources with IR return path and HDMI loop through. |
 |
S8866 NEW
|
|
- HDMI input
- AV input
- 1080p Full HD tuner
- 1080p Full HD resolution 23.6” LED panel
- 3.5mm headphone output
- USB PVR recording support
- IR Remote control
- Ideal for 4WD’s caravans, boats and camper vans
- 240V AC (plugpack) or 12V DC operation
- VESA 75 x 75mm compatible mounting
|
|
This 23.6” wide screen TV is designed for 12V vehicles, 4WDs, caravans and campers. Full HD 1080p. |
 |
S8864A NEW
|
|
- Sturdy adjustable back stand
- 1280x800 resolution
- USB PVR recording support
- HDMI input
- AV input
- HD tuner
- Headphone output
- SD card slot
- IR Remote control
|
|
A must have for your next caravan, boating or camping trip. This portable 14 inch TV allows you to enjoy high definition entertainment on the go thanks to its in-built lithium battery. |
 |
A1057 |
|
|
|
Distribute multiple AV signals to multiple TV screens. These multi-channel modulators and associated accessories allow the distribution of stereo audio/video signals from a variety of sources. |
 |
LX2081A NEW
|
|
- Frequency Range 174~694 MHz (Channels 6 to 51)
- 44dB Maximum Gain
- 10dB Mid-Stage Gain Control
- Single RF Input
- Local or Remote Powering Options
- F-Type Connector for Power Input
- Adjustable Slope Control of 0dB to 10dB
- -30dB Test Point
- Ability to send power out via the RF Input
- High Output Figure: 118dB IMR3 (DIN45004B)
- Connectors: F-Type
- Power Consumption: 300mA
- Operating Voltage: 18V DC
- Operating Temperature: -10ºC to 50ºC
|
|
Kingrays DA44 distribution amplifier has been designed to suit the digital television environment of today and well into the future. |
 |
A1142 |
|
- Video resolution - Up to 1080p
- HDMI and component video outputs
- Stereo analogue audio output via RCA
- MPEG-2, H.264/AVC SD/HD stream decoding
- 10/100M Base-T RJ45
- Audio MDI/MDIX IGMP multicasting programs
- Support USB 2.0 FAT32
- Easy to install and use
- Light weight & compact
- Includes remote control
|
|
Works in conjunction with the A 1140 for televisions without DLNA streaming capability (typically non-smart TVs). It receives HD content via IP and outputs to your TV via HDMI and component video connections. Compact design allows installation in any environment. Includes power supply. |
 |
A3615 NEW
|
|
- Project screens up to 4m wide
- Compact lightweight design
- 800 x 480p output resolution
- 1080p input resolution
- Internal speaker
- 3.5mm jack audio out
- USB media playback
- HDMI input
- Screen mirroring from PC, Mac, iOS and Android devices
- Adjustable focusing
- Threaded insert in base for tripod mounting
- Power from mains power supply or battery bank (via micro USB).
|
|
This compact projector offers excellent LED picture quality with 800x480p resolution for screens up to 4m (170”) wide! |
 |
L2012A NEW
|
|
- Designed for prime capital cities for VHF and UHF channels 6-12 and 28-38
- Boomlock technology used to secure elements to balun
- New mounting clamp for quicker and safer installation
- Matched diplexer-balun rejects out-of-band interference for minimal picture break-up
- Ultrasonically sealed balun prevents water ingress for maximum reliability
- Strong mechanical construction with a lightweight and compact design
|
|
The Tru-Band antenna range is a revolutionary new combination antenna for capital cities that have been designed for the digital-only TV environment in Australia. |
 |
A1056 |
|
- Sleek unobtrusive Flat IR Target for use with Vcomm’s RF IR Video Distribution System with IR modulator / video hub emitters.
- Flexible flat cord allows for ease of placement of target.
- Target plugs into compact in-line coaxial connector box using 3.5mm mini-jack
- Light-weight Connector box has mounting brackets for ease of installation
- To facilitate placement, adhesive backing is also included for both target and connector box.
- Receives IR commands from remote controls and send the signals through the Video Hub and emitters to control the AV device at a remote location
- Built-in LED to show acknowledgement of IR commands
- Rejects interference from displays that enters the IR signal line
- Rejects interference from direct sunlight and fluorescent tube lights for accurate IR signal reception
- Powered remotely by modulator (both connector box & target)
|
|
The resi-linx™ RL-RF210 is a sleek and unobtrusive "Plasma Friendly" Flat IR Target for use in the resi-linx™ range of RF IR Video Distribution system. The target receives IR commands from remote controls and sends the signal through the Video Hub and Emitters to control the AV device at a remote location. |
 |
D2816 |
|
- Compact size, just 108Ø x 25mm
- Works with majority of videos streaming apps
- Android 10
- RK3318 quad core A53 processor
- 4GB DDR3 RAM
- 32GB on board storage
- Supports HDMI 2.0 up to 4K output
- H.265 video decoding
- Onboard 802.11n Wi-Fi and wired ethernet
- Bluetooth 4.0
- Two USB ports
- Micro SD card slot
- Includes IR remote
|
|
This compact TV box provides all the entertainment your TV can handle, access your home media library or go online to stream HD & 4K content. |
 |
L2008A
|
|
- F-Type Balun with LTE Low Pass Filter
- Folding feature for easy storage
- Designed & engineered in Australia for Australian conditions & Australian digital television transmissions
- UV stabilised plastics
- Horizontal and vertical mounting options
- Elevation/Tilt bracket included
- U-bolts & Clamps fitted
|
|
This UHF Phased array antenna has been specifically designed to operate best in areas where reflections and ghosting are a problem. Due to its design it can be mounted horizontally or vertically. |
 |
L2051 |
|
- VHF
- Frequency Range: 44-470
- Maximum Gain (dB): 12-14
- Inputs : 1
- Noise Figure (dB): <3.5
- Gain Control (dB): N/A
- Mains: 230 -240V AC
- Output Figure DIN45004B (uV): 100
- UHF
- Frequency Range: 470-860
- Maximum Gain (dB): 16
- Inputs : 1
- Noise Figure (dB): <3.5
- Gain Control (dB): N/A
- Mains: 230 -240V AC
- Output Figure DIN45004B (uV): 100
|
|
These amplifiers are ideal for use at home where you want to operate more than one TV. Installation is simple. Run a single cable from each outlet back to the amplifier. Boosts antenna signal by approximately 10-12dB which ensures a strong signal for im |
 |
L2015A NEW
|
|
- Precise antenna specifications within the desired UHF frequency band
- Boomlock™ manufacturing technology used to secure elements
- New mounting clamp for easier and safer installation
- Ultrasonically sealed balun housing for maximum reliability
- PCB balun for true matching and lowest insertion loss
- 4G filter included
- Strong and lightweight aluminium construction
- Designed and manufactured in Australia
|
|
The Hills Antenna Tru-Max 18 4G antenna is a superior phased array antenna used for regional UHF areas. |
 |
L2017D NEW
|
|
- F-type connectors for better shielding and more reliable connections
- Heavy duty construction for extra strength
- Rectangular galvanised steel boom construction provides element alignment
- Powder coated boom for longer life and improved aesthetics
- UV stable plastics for durability under harsh Australian conditions
- Suitable for reception of horizontal or vertical polarisation
|
|
The Hills Antenna DY series antennas combine a F-Type connection for superior screening with wider bandwidth for digital television reception. The DY-6 antenna is a 6 element outer prime VHF antenna, ideal for areas just outside of capital cities. |
 |
L2003
|
|
- Provides crystal clear reception in mobile vehicles
- Housing is completely waterproof
- Constructed from UV resistant ASA plastic for long term durability
- Comes complete with power supply, cables, connectors and fitting instructions
- Easy to assemble
|
|
This outdoor antenna is a must have for your caravan, RV or boat. It provides crystal clear reception in mobile vehicles. |
 |
L2017C
|
|
- F-Type High Performance Balun
- Snap out reflectors
- Stainless Steel screws on connection points
- Designed and tested for digital/analogue reception
- Heavy Duty construction on all components
- 12mm extruded aluminium heavy duty elements
- Tough powder coated finish
- UV stabilised plastics
- Bifurcated rivets - Strongest in the industry
- U-bolts & Clamps fitted
|
|
Deluxe heavy duty VHF digital antenna manufactured with steel boom and extruded elements. |
 |
L2062A |
|
- Frequency Range 174-230 MHz & 520-694 MHz
- 35dB UHF Maximum Gain
- 26dB VHF Maximum Gain
- 15dB Gain Control for UHF
- 16-12dB Tilt Control for VHF
- Separate VHF & UHF Inputs or Combined Input
- FM Radio 88-108 MHz Pass Through Selectable
- 4G/LTE Filtering
- Weatherproof Housing
- High Output Figure of 108dB IMR3 (DIN45004B)
- Connectors: F-Type
- Power Consumption: 80mA
- Suitable Power Supply: PSK06 Series or PSK08 Series
|
|
As the name suggests, this amplifier is mounted on the antenna mast (as close to the antenna as possible) to avoid any signal loss from the connecting cable. It has inputs for a separate VHF or UHF antenna or a combined input for both. Signal balance is a |
 |
L2004
|
|
- Sturdy construction - Dipole fixed to boom in two places
- Long clearance boom to prevent mast interference
- Tight frequency response across the DAB+ channels
- Also suits FM radio signal reception
- Vertically mounted
|
|
A high performance antenna designed specifically for DAB+ digital radio reception in digital reception areas. Fitted with F-type balun, UV stabilised plastic parts and heavy duty bifurcated rivets for long life. VHF band III channels 6-12. Length: 670mm. |
 |
A1093 |
|
- Component video and digital/analogue audio balun receiver
- Built-in IR control with the addition of RL-BV500 Target
|
|
Component Video, Digital Audio and Stereo Audio Balun Receiver for use with RL-BV240A. Built-in IR control with the addition of RL-BV500 Target. |
 |
L2006B
|
|
- Can be mounted vertical or horizontal as required
- Designed and tested for digital/analogue reception
- Heavy Duty construction on all components
- UV stabilised plastics
- Easy to assemble
- Added front directors for better F/B gain
- F-Type Balun with LTE low pass filter
- Ultrasonically sealed balun housing
- Unique compact holding phased array
|
|
Lightweight, entry level antenna for metro/normal signal areas. Digital ready. Suits VHF channels
6-12 & UHF 28-35 channels. |
