|
Description |
Downloads |
Specs |
Ordering |
|
![P0065A 6.35mm Switched SPST Non-Insulated Mono Jack Socket](https://images.altronics.com.au/thb/p/P0065A.jpg) |
P0065A NEW
|
|
|
|
6.35mm mono chassis mount socket with SPST contact switch. |
![S5748 6.3A 5x20 (M205) 250V Fuse](https://images.altronics.com.au/thb/s/S5699.jpg) |
S5748 NEW
|
|
|
|
250V. 6.3A. Glass fuse. Available in M205 and 3AG sizes. Used in many appliances. |
![S5818 6.3A 6x32 (3AG) 250V Fuse](https://images.altronics.com.au/thb/s/S5818.jpg) |
S5818 NEW
|
|
|
|
250V. 6.3A.
Glass fuse.
Used in many appliances. |
![M8536B 6/12V 10A / 14.4V 9A Automotive Battery Charger](https://images.altronics.com.au/thb/m/M8536B.jpg) |
M8536B NEW
|
|
- Short circuit and reverse polarity protected
- Suitable for use with lead acid, LiFePO4, AGM/EFB batteries.
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 10A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
![X2384 600 Lumen Solar Powered Security Sensor Floodlight](https://images.altronics.com.au/thb/x/X2384.jpg) |
X2384 NEW
|
|
- No wiring needed! Just bolt to the wall and the sun does the rest.
- 3 lighting modes with adjustable LED side panels
- Motion activated with 30 second on time.
- IP65 rated for water and dust resistance
- Internal rechargeable battery
- Ideal for adding instant security lighting to your home.
|
|
This compact motion activated solar powered flood light provides light wherever you need it due to its adjustable LED panels and cable free solar battery design. |
![M8025 600W 24V Pure Sine Wave Power Inverter](https://images.altronics.com.au/thb/m/M8025.jpg) |
M8025 NEW
|
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Multi-function LCD readout
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
![S8866 60cm (23.6”) 12 Volt LED Full HD Digital Television](https://images.altronics.com.au/thb/s/S8866.jpg) |
S8866 NEW
|
|
- HDMI input
- AV input
- 1080p Full HD tuner
- 1080p Full HD resolution 23.6” LED panel
- 3.5mm headphone output
- USB PVR recording support
- IR Remote control
- Ideal for 4WD’s caravans, boats and camper vans
- 240V AC (plugpack) or 12V DC operation
- VESA 75 x 75mm compatible mounting
|
|
This 23.6” wide screen TV is designed for 12V vehicles, 4WDs, caravans and campers. Full HD 1080p. |
![D0520 65W USB C PD Battery Bank 20000mAh](https://images.altronics.com.au/thb/d/D0520.jpg) |
D0520 NEW
|
|
- High 65W output for high capacity devices such as laptops
- 20,000mAh capacity
- 74Wh capacity - OK for air travel
- USB type A and type C outputs on front panel
- Study aluminium casing.
|
|
This 20,000mAh battery bank offers high output Power Delivery (PD) allowing users the ablity to charge a range of devices. It features an aluminium casing with power capacity LCD readout. Dual USB type A outputs as well as dual USB C PD outputs. |
![S4166 6A 240V AC/DC Input DPDT DIN Rail Cradle Relay](https://images.altronics.com.au/thb/s/S4166.jpg) |
S4166 NEW
|
|
- Nominal voltage: 250V AC
- Nominal current: 6A
- Cradle input voltage: 220-240V AC/DC
- Nominal coil voltage: 60V DC
- Pick-up voltage (max): 45V DC
- Drop-out voltage (min): 3.0V DC
- Max voltage: 90V DC
- Coil resistance: 16,600Ω. (+/- 15%)
- Max switching power AC: 1500VA
- Max switching power DC: 180W
- Contact material: Silver alloy
- Max coil power: 210mW
- Insulation resistance: >1000MΩ @ 500V DC
- Dielectric strength (for 1 min):
- 1000V AC between open contacts
- 4000V AC between coil & contact
- Life: 60,000 electrical, 10 million mechanical
|
|
A super slimline DIN rail mount relay designed for industrial switching applications. Suits standard 35mm DIN rail. Supplied with 60V DC coil relay. |
![S4164 6A 24V DC DPDT DIN Rail Cradle Relay](https://images.altronics.com.au/thb/s/S4164.jpg) |
S4164 NEW
|
|
- Nominal voltage: 250V AC
- Nominal current: 6A
- Cradle input voltage: 6-24V AC/DC
- Nominal coil voltage: 24V DC
- Pick-up voltage (max): 18V DC
- Drop-out voltage (min): 1.2V DC
- Max voltage: 36V DC
- Coil resistance: 3390Ω. (+/- 15%)
- Max switching power AC: 1500VA
- Max switching power DC: 180W
- Contact material: Silver alloy
- Max coil power: 170mW
- Insulation resistance: >1000MΩ @ 500V DC
- Dielectric strength (for 1 min):
- 1000V AC between open contacts
- 4000V AC between coil & contact
- Life: 60,000 electrical, 10 million mechanical
|
|
A super slimline DIN rail mount relay designed for industrial switching applications. Suits standard 35mm DIN rail. Supplied with 24V DC coil relay.
|
![M8534B 6V/12V 6A / 14.4V 4.5A Automotive Battery Charger](https://images.altronics.com.au/thb/m/M8534B.jpg) |
M8534B NEW
|
|
- Short circuit and reverse polarity protected
- Suitable for use with lead acid, LiFePO4, AGM/EFB batteries.
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 6A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
![X2385 6W Outdoor Wall/Garden Solar Spotlight](https://images.altronics.com.au/thb/x/X2385.jpg) |
X2385 NEW
|
|
- Floodlight or spotlight beam
- Colour temperature selection
- Automatic dusk activation
- Ideal for lighting up garden beds, feature plants, driveways, water features and more.
- Quality construction - best we have evaluated!
- Approx 7 hour run time
- Wall or garden bed/lawn mounting with removable ground spike.
|
|
This solar spotlight is suitable for highlighting all your garden and landscape features, or to light up your pathway. |
![D2362A 7 Port Powered USB Hub With Switching](https://images.altronics.com.au/thb/d/D2362A.jpg) |
D2362A NEW
|
|
- USB 3.0 5Gbps transfer speeds on all ports.
- Illuminated power switches, see which devices are turned on at a glance.
- USB type A connection.
- Compact and lightweight design.
- Provides plenty of ports for all your USB devices.
- Plug and play, no drivers required for most operating systems.
- External power input port provided for high current devices (USB-C)
|
|
A handy 7 port USB 3.0 hub for those with lots of peripherals! Each connection has a dedicated on/off switch. USB type C power input with type A connection to your computer. |
![P2637 7 Way 5.08mm Vert. Top Entry Pluggable Terminal Plug](https://images.altronics.com.au/thb/p/P2637.jpg) |
P2637 NEW
ROHS
|
|
|
|
Rising clamp type terminals. Rated 15A at 300V. |
![Z6516A 7](https://images.altronics.com.au/thb/z/Z6516A.jpg) |
Z6516A NEW
|
|
- 7’’ standard display, 1024x600 resolution
- Capacitive touch screen, maximum support 5 point touch
- Supports backlight control, the backlight can be turned off to save power
- Supports standard HDMI interface input.
- Can be used as general-purpose-use HDMI monitor, for example: connect with a computer HDMI as the sub-display (resolution of the output has to be able to adjust to 800X480)
- Used as a Raspberry Pi display that supports Raspbian, Ubuntu, Kodi, win10 IOT, single-touch, free drive etc.
- Works as a PC monitor, support win7, win8, win10 system 5 point touch (XP and older version system: single-point touch), free drive.
|
|
A 1024x600 touchscreen for Raspberry Pi that supports standard HDMI interface input which can be directly connected to Raspberry Pi. |
![A4660 7](https://images.altronics.com.au/thb/a/A4660.jpg) |
A4660 NEW
|
|
- Standard Features:
- Touch control paging with pre and post announcement chime options.
- Adjustable microphone automatic gain control (AGC).
- High quality electret microphone with high ambient noise control and feedback rejection.
- Adjustable backlight brightness and dimmed brightness levels with selectable timeout period.
- All glass front bezel for a stylish finish for any room.
- Connects via economical Cat5e UTP cabling.
|
|
This paging console is designed to provide general paging to zones when connected to the Redback A 4450, A 4460 or A 4650 systems. It provides a visual indication of the status of all audio sources and zones within the system at a glance, sharing a common screen with the master wallplates available for use with these systems. |
![A4463 7](https://images.altronics.com.au/thb/a/A4463.jpg) |
A4463 NEW
|
|
- Simple touchscreen control selection of zone inputs and level control.
- Changes in selections are reflected on the relevant zone wall plates & main Redback units.
- Adjust custom labelling of zones and inputs on screen.
- Choose button colour theme.
- Fits standard double gang electrical wall box with mounting plate included.
- All glass front bezel for a stylish finish for any room.
- Adjustable screen sleep mode.
- Connects via economical Cat5e UTP cabling.
|
|
These 7" touchscreen control wall plates allow for remote source selection and level control in Redback source control systems (currently compatible with A4450, A4460 and A4650 systems). |
![A4661 7](https://images.altronics.com.au/thb/a/A4661.jpg) |
A4661 NEW
|
|
- Standard Features:
- Touch control paging with pre and post announcement chime options.
- Adjustable microphone automatic gain control (AGC).
- High quality electret microphone with high ambient noise control and feedback rejection.
- Adjustable backlight brightness and dimmed brightness levels with selectable timeout period.
- All glass front bezel for a stylish finish for any room.
- Connects via economical Cat5e UTP cabling.
|
|
This paging console is designed to provide general paging to zones when connected to the Redback A 4450, A 4460 or A 4650 systems. It provides a visual indication of the status of all audio sources and zones within the system at a glance, sharing a common screen with the master wallplates available for use with these systems. |
![M4315A 7.5V + 7.5V PCB 10VA Toroidal Transformer](https://images.altronics.com.au/thb/m/M4315.jpg) |
M4315A NEW
|
|
- Sec. V: 7.5+7.5
- Sec. Parallel: 1.3A
- Sec. Series: 0.66A
- Primary voltage: 2 x 120V AC
- Total VA rating: 10VA
- Insulation: Class A (105°C)
- Magnetising current: <20mA
- Temperature rise: <65°C
- Recommended AC Fuse: 100mA
- Regulation: ˜20%
- Weight: ˜210g
- PCB hole size: 2mm
- AS/NZS 61558.2.6 approval: Q99396
- Note: Must be used with a standard 100mA external AC fuse
|
|
Toroidal transformers provide a higher output compared to traditional E-I transformers of a similar physical size. They have substantially reduced radiated hum and electrical noise, generate less heat and have much better regulation making them ideal for |
![S5887 70A Surface Mount IP67 Waterproof Circuit Breaker](https://images.altronics.com.au/thb/s/S5887.jpg) |
S5887 NEW
|
|
- Max. Voltage: 42V DC
- Interrupt Rating: 3000A @ 30V DC
- Operating Temperature: -32°C to 82°C
- Testing: SAE J1625, SAE J1171 (ignition protected)
- Material: UL94V-0
- IP Rating: IP67
- RoHS approved
- UL approved 50A @ 32V DC
- External Dimensions: 70 x 50 x 35mm
|
|
This 70A high current surface mount circuit breaker is ideal for use in 12V or 24V DC power systems. |
![T2978A 70mm x 33m High Temperature Polyimide Tape](https://images.altronics.com.au/thb/t/T2978A.jpg) |
T2978A NEW
|
|
|
|
Offers high heat resistance and excellent dielectric strength. The tape removes cleanly without leaving a residue. Ideal for use in electrical insulation or masking circuit boards during wave soldering. 33m rolls. |
![P7818B 75A 600V Black PowerPole Style High Current DC Anderson Plug](https://images.altronics.com.au/thb/p/P7818B.jpg) |
P7818B NEW
|
|
- Cable Entry: 3.2mm.
- Max Insulation Diameter: 11mm
- Rated current: 75A
- Rated voltage: 600V
- Insulation Resistance: 5000MΩ
- Average contact Resistance(micro-ohms):<180 1-5.
- Voltage Proof: 2200V(DC)
- Life Without load(Contact/Disconnect Cycles):To 10000
- Life With Load (Hot Plug 250 Cycles&120V): 50A
- Flammability:UL94 V-0
- Contact Barrel Wire Size(AWG):6~12AWG
- Connector holding force(LBF):250N Min
- Environment Temperatures:-20℃ to 125℃
|
|
Genuine Anderson Power DC 600V connector. |
![P7817B 75A 600V Red PowerPole Style High Current DC Anderson Plug](https://images.altronics.com.au/thb/p/P7817B.jpg) |
P7817B NEW
|
|
- Cable Entry: 3.2mm.
- Max Insulation Diameter: 11mm
- Rated current: 75A
- Rated voltage: 600V
- Insulation Resistance: 5000MΩ
- Average contact Resistance(micro-ohms):<180 1-5.
- Voltage Proof: 2200V(DC)
- Life Without load(Contact/Disconnect Cycles):To 10000
- Life With Load (Hot Plug 250 Cycles&120V): 50A
- Flammability:UL94 V-0
- Contact Barrel Wire Size(AWG):6~12AWG
- Connector holding force(LBF):250N Min
- Environment Temperatures:-20℃ to 125℃
|
|
Anderson Power Pole style DC 600V connector (not genuine). As used in automotive and industrial applications. Can be dovetailed together for multi-pole connectors. 75A rated. Sold individually. |
![D4432 7dBi Blackhawk White Marine Antenna with Mount](https://images.altronics.com.au/thb/d/D4432.jpg) |
D4432 NEW
|
|
- 7 dBi gain across all mobile frequencies 698 to 960 MHz and 1710 to 2700 MHz
- White marine-grade fibreglass construction
- Short cable tail with a pre-fitted N Female connector Cable Sold Separately
- Operate with all mobile networks across Australia, New Zealand, and Internationally.
- Comes with an adjustable standard nylon mount
- Frequency: 698-2700MHz
- Dimensions: 70mm x 50mm x 1270mm
- Weight: 1kg
|
|
The Blackhawk Marine Antenna is designed to provide 4G connectivity in both close coastal and long range offshore boating. The antenna has the ideal 7 dBi gain that allows long range connectivity. |
![X2387 7W 800 Lumen Solar Power Sensor Floodlight](https://images.altronics.com.au/thb/x/X2387.jpg) |
X2387 NEW
|
|
- Suitable for both commercial and domestic lighting
- Natural White colour
- Adjustable mounting bracket
- Safe to use for outdoor applications
|
|
This 7W 800 Lumen LED Solar Powered Sensor Floodlight features a quality plastic body and durable mounting bracket. It can be mounted as a wall light. |
![A4420C 8 Channel Public Address (PA) Mixer](https://images.altronics.com.au/thb/a/A4420C.jpg) |
A4420C NEW
|
|
- 6 microphone and 2 line inputs
- All mic inputs are 3 pin XLR balanced
- Line inputs via twin RCA sockets
- Separate bass and treble tone controls
- Individual input and master volume controls
- Optional VOX muting of line inputs
- Optional phantom power for each mic input
- Microphone bass cut internally selectable
- Mic inputs routed via tone controls or bypassed
- 24VDC input
|
|
This 8 channel mixer incorporates a variety of practical features ensuring suitability for a wide scope of PA and sound reinforcement applications. |
![P0530A 8 Pin (0.3](https://images.altronics.com.au/thb/p/P0530.jpg) |
P0530A NEW
|
|
- Contact Resistance: 30mΩ Max @ DC 100mA
- Insulation Resistance: 1000MΩ Min @ DC 250V
- Current Rating: 1 Amp
- Dielectric Voltage: AC 500V for 1 Minute
- Operating Temp: -55° to 105° C
- Gold Plated Beryllium Copper Contacts.
|
|
Contact Resistance: 30m? Max @ DC 100mA
Insulation Resistance: 1000M? Min @ DC 250V
Current Rating: 1 Amp
Dielectric Voltage: AC 500V for 1 Minute
Operating Temp: -55° to 105° C
Gold Plated Beryllium Copper Contacts. |
![P2638 8 Way 5.08mm Vert. Top Entry Pluggable Terminal Plug](https://images.altronics.com.au/thb/p/P2638.jpg) |
P2638 NEW
|
|
|
|
Rising clamp type terminals. Rated 15A at 300V. |
![A3136D 8 Way HDMI Splitter 18GBps Bandwidth](https://images.altronics.com.au/thb/a/A3136D.jpg) |
A3136D NEW
|
|
- HDCP 2.2 compliant
- Supports 18Gbps bandwidth
- Supports resolution up to 4K@60Hz 4:4:4
- Supports HDR function
- Supports COPY/AUTO EDID control via dialling the DIP switch
- Compact design for easy and flexible installation
|
|
Allows the connection of multiple HDMI displays to a single HDMI source with no loss of signal quality. |
![P8159 8 Way Mains Power Board with 4 USB Ports](https://images.altronics.com.au/thb/p/P8159.jpg) |
P8159 NEW
|
|
- This feature keeps your connected appliances from getting damaged in a power surge condition. These conditions can be storm related or due to local power supply fluctuations. Unprotected power surges can seriously damage or shorten the life of your equipment.
|
|
Provides connection for all your appliances with surge protection and 4 way USB charger (max total 3.1A output. 2.1 single port). |
![S9833B 8.0 Megapixel Motor Zoom IP Dome Camera](https://images.altronics.com.au/thb/s/S9833B.jpg) |
S9833B NEW
|
|
- Pro IP Dome
- 1/2.8" SONY Starvis Back-illuminated CMOS sensor
- H.265+/H.265/H.264+/H.264 Compression Method
- 2.7-13.5mm Motorized Lens
- IR Distance 25M Max.
- With Internal POE and External SD Card Slot
|
|
This compact 8MP dome/turret camera utilises a 1/2.8' SONY Starvis Back-Illuminated CMOS Sensor for a crisp clear view day or night. |
![Q0967 800W PV Solar Panel Tester](https://images.altronics.com.au/thb/q/Q0967.jpg) |
Q0967 NEW
|
|
- Auto/manual MPPT detection.
- Multiple protections - short circuit, reverse polarity, over voltage, over temperature, over current.
- No power supply required - no batteries.
- Large LCD with easy to read backlit display.
- Includes croc clip test cables, MC4 test cables and carry case.
|
|
Designed for measuring voltage, current and power of connected PV solar panels up to 800W. This meter provides instant feedback on PV system operation and allows optimal placement of solar panels for maximum energy conversion. |
![N0080G 80W 12V Monocrystalline Solar Panel](https://images.altronics.com.au/thb/n/N0080G.jpg) |
N0080G NEW
|
|
- Excellent performance under low light conditions, creating better kWh/kW ratio and produces an average of 2-3% more electricity.
- Anti reflective and self cleaning glass surface reduces power loss due to dirt and dust.
- Junction box and bypass diodes make sure the modules do not overheat or create a "hot spot" effect.
|
|
This quality 80W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. |
![M8196 83Wh USB Portable DC Power Generator & Camp Light](https://images.altronics.com.au/thb/m/M8196.jpg) |
M8196 NEW
|
|
- 83Wh internal lithium-ion battery (22.5Ah @ 3.7V)
- Light weight yet sturdy design with carry handle
- Micro USB recharge port
- USB C PD 18W output
- Dual QC3.0 18W USB A outputs
- 5W max hand crank recharging
- Torch with SOS mode
- Three brightness lantern/reading lamp
- Recharge time 4.5hrs (QC3.0).
- Battery capacity readout
|
|
Great for camping and hiking getaways, this compact portable charging solution keeps your devices powered up while also providing a handy lamp and torch. |
![A3107 8K 40Gbps HDMI 4 Way Splitter](https://images.altronics.com.au/thb/a/A3107.jpg) |
A3107 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 40Gbps video bandwidth
- Supports video resolution up to 8K@60Hz 4:2:0 10bit, 8K@30Hz 4:4:4 10bit, 4K@120Hz 4:4:4 10bit
- VRR, FVA, ALLM supported
- Supports HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- Supports HDMI audio formats: LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
- Built-in Equalizer, Retiming and Driver
- Advanced EDID management
- Support audio de-embedding function (output through the optical and analog port)
- Compact design for easy and flexible installation for four HDMI outputs
- HDMI daisy chain several splitters - up to 4 levels.
|
|
This splitter can distribute one HDMI source signal to any four display devices. |
![A3104 8K 48Gbps 2 Way HDMI Switcher](https://images.altronics.com.au/thb/a/A3104.jpg) |
A3104 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 48Gbps video bandwidth
- Supports resolutions up to 8K@60Hz 4:4:4 8/10/12bit, 8K@60Hz 4:2:0 12-bit, 8K@30Hz 4:4:4 10-bit, 4K@120Hz 4:4:4 10-bit
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- VRR, FVA, ALLM supported
- Supports HDMI audio formats: LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio.
- 2x1 switch output, auto switch supported
- Built-in Equalizer and Driver
- Auto EDID management
- Compact design for easy and flexible installation
|
|
Offering 8K @ 60Hz resolution switching, this 2 way HDMI source selector is ready for the latest high resolution AV sources. |
![A3105 8K 48Gbps 4 Way HDMI Switcher](https://images.altronics.com.au/thb/a/A3105.jpg) |
A3105 NEW
|
|
|
|
Offering 8K @ 60Hz resolution switching, this 4 way HDMI source selector is ready for the latest high resolution AV sources. |
![A3109 8K 4x2 HDMI Matrix Switcher with eARC](https://images.altronics.com.au/thb/a/A3109.jpg) |
A3109 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 40Gbps video bandwidth
- Supports video resolution up to 8K@60Hz 4:2:0 10bit, 8K@30Hz 4:4:4 10bit, 4K@120Hz 4:4:4 10bit
- VRR, FVA, ALLM supported
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- Support HDMI audio formats: LPCM, Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
- INPUTS 1 port and OUT 1 port support eARC/ARC function
- Allows HD audio up to Dolby Atmos, DTS:X over TrueHD from ANY external HDMI source to any eARC/ARC sound system
- Support audio de-embedding function (output through the optical and analog port)
- Built-in EDID DIP switch supports advanced EDID management
- 8K->4K, 8K/4K->2K downscaler support
- Support IR remote control and front panel button switching
- Built-in Equalizer, Retiming and Driver
- Compact design for easy and flexible installation
|
|
Allows four HDMI 8K V2.1 sources to be switched to two outputs/screens. This compact switcher brings together your HDMI sources for easy switching via front panel or IR remote control. |
![A3106 8K HDMI 2 Way Splitter](https://images.altronics.com.au/thb/a/A3106.jpg) |
A3106 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 40Gbps video bandwidth
- Supports video resolution up to 8K@60Hz 4:2:0 10bit, 8K@30Hz 4:4:4
- 10bit, 4K@120Hz 4:4:4 10bit
- VRR, FVA, ALLM supported
- Supports HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- Supports HDMI audio formats: LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
- Built-in Equalizer, Retiming and Driver
- Advanced EDID management
- Support audio de-embedding function (output through the optical and analog port)
- Compact design for easy and flexible installation for two HDMI outputs
- HDMI daisy chain several splitters - up to 4 levels.
|
|
This splitter can distribute one HDMI source signal to any two display devices. It supports video resolution up to 8K@60Hz 4:2:0. |
![S9365A 9 Channel / 4 Channel x PoE 8MP Network Video Recorder](https://images.altronics.com.au/thb/s/S9365.jpg) |
S9365A NEW
|
|
- H.264+/265+ compression
- 4K HDMI monitor output
- Recording up to 8MP @ 25fps per ch
- Supports iOS and Android remote viewing
- 4 x 15.4W PoE network interfaces
- Internal SATA interface, max 8TB
- USB backup
- Dedicated network interface
- Audio input & output
- ONVIF S/T support
|
|
This multi-channel network video recorder offers 8MP (4K) resolution recording at 25fps per camera. |
![M2165C 9-24V / 240V 60VA EI Core Transformer](https://images.altronics.com.au/thb/m/M2165C.jpg) |
M2165C NEW
|
|
- Primary voltage: 240V AC
- Total VA rating: 60VA
- Insulation: Class E (120°C)
- Magnetising current: <85mA
- Temperature rise: <65°C
- Regulation: ˜10%
- Recommended primary AC fuse: 500mA
- Weight: ˜1.4kg
- Primary connection: 200mm fly leads
- Secondary connection: Solder tags
|
|
Powertran EI-Core 240V AC mains transformer with 6.6A dual multi tapped secondary configuration. Two sets of 0V, 9V and 12V secondaries are available at a maximum current of 6.6A (max current when 9V secondaries connected in parallel) . Primary is fitted with 200mm flyleads. Secondary taps have solder tags. Fully electrical authority approved for A |
![F1158A 92mm 240VAC Maglev Bearing Cooling Fan](https://images.altronics.com.au/thb/f/F1158A.jpg) |
F1158A NEW
|
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles brushless DC motor
- Motor Protection: Impedance protected
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 119.7g
- Dimensions: 92 x 92 x 25mm
- Electrical Characteristics
- Rated Voltage: 220-240V AC at 50/60Hz
- Rated Current: 225mA (230mA max)
- Input Power: 4.6W
- Operating Voltage Range: 150-250V AC
- Starting Voltage: 150V AC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2900/3000 RPM ±20%
- Air Flow: 52/54 CFM
- Static Pressure: 0.12/0.14 Inch-H2O
- Noise Level: 31/32dB(A)
- Insulation Resistance: 10MΩ (min) at 500V DC
- Dielectric Strength: 1500V AC for one second
|
|
Connection: Flying Lead
Air Flow: 52CFM
Input Power: 4.6W
Input voltage: 240VAC
Input current: 220mA
Speed: 2900 RPM
Noise Level: 31dBA
Material: Thermoplastic
Size: 92 x 92 x 25mm
Bearing Type: Maglev
Blade Type: Plastic |
![SA0456 9V Battery Snap Clip Heavy Duty](https://images.altronics.com.au/thb/s/SA0456.jpg) |
SA0456 NEW
|
|
|
|
Battery snap clip to suit 9V batteries. These can also be used to connect to some of our battery holders which include an integral battery snap. |
![A4574A Alert/Evac/Chime Tone Generator](https://images.altronics.com.au/thb/a/A4574A.jpg) |
A4574A NEW
|
|
- Level controls for alert/evac, bell and voice over
- Front panel alert/evac/bell and cancel switches
- All tones MP3 based
- Alert/Evac Emergency tones can be configured for momentary or continuous operation
- 1U half rack cabinet
- Alert and Evac Tones conform to AS 1670.4 (Library included on Micro SD card)
- Compatible with fire indicator boards & break glass alarms
- Remote operation of alert , evac, bell tones & cancel.
- Local operation of alert, evac and bell
- MP3 based Alert and Evacuation Voice over message facility
- Bell chime facility
- Switched 24V DC outputs for override relays or strobes (outputs limited to 120mA)
- On-board timer for remote alert activation adjustable from 30secs to 7.5min in 30 second increments.
- Switches from alert to evac after preset time.
- Auxiliary level output
- 10 year warranty
- Australian designed and manufactured
|
|
This unit has provision for playback of Alert, Evacuation and chime tones as well as an alert and/or emergency message. When connected to a paging system amplifier, building occupants can be alerted and/or evacuated in the event of an emergency e.g.: fire, gas leak, bomb scare, earthquake. |
![P1024A Alligator / Croc Clip to Pin jumper leads](https://images.altronics.com.au/thb/p/P1024A.jpg) |
P1024A NEW
|
|
|
|
Handy test leads. Pack of 10. Contains: two of each yellow, red, white, black and blue |
![B0224 Altronics 2024/25 Build It Yourself Electronics Catalogue](https://images.altronics.com.au/thb/b/B0224.jpg) |
B0224 NEW
|
|
|
|
The 32nd edition of our electronics catalogue, featuring our entire range of products including audio visual, pro audio, speakers, security, test equipment, tools, technology, kits, lighting, power, solar, transformers, hardware, components, switches, connectors and cable! |
![T4002B Anti-Static Wrist Strap 2m](https://images.altronics.com.au/thb/t/T4002B.jpg) |
T4002B NEW
|
|
|
|
Elastic adjustable wrist strap allows full freedom of movement while protecting components from static damage. |
![X0585 ANU410 6dBi 1.6m UHF CB Antenna](https://images.altronics.com.au/thb/x/X0585.jpg) |
X0585 NEW
|
|
- Mounting base complete with spring
- Fibreglass extension pole (full antenna height 1.6m)
- 4.5m coaxial cable, a pre-terminated FME connector and PL259 adaptor
|
|
The ANU410 is a 6dBi UHF CB Antenna with a detachable fiberglass pole. At 1.6m height and 6dbi gain, this antenna is ideal for those looking for effective communication in Australia’s relatively flat outback. |
![X0587 ANU850 3dBi 60cm UHF CB Antenna](https://images.altronics.com.au/thb/x/X0587.jpg) |
X0587 NEW
|
|
- Heavy duty barrel spring base
- Fibreglass radome
- Length of antenna is 660mm
- Low-loss coaxial cable (4.5m)
- Pre-terminated FME connector and PL259 adaptor
|
|
The ANU850 is a 3dBi UHF CB Antenna with fibreglass pole and heavy duty barrel spring base. |
![D2384 Apple Lightning To USB Type C 2m Data/Charging Cable](https://images.altronics.com.au/thb/d/D2384.jpg) |
D2384 NEW
|
|
|
|
This cable allows you to connect Lightning equipped devices to USB C ports for charging, data transfer etc. Length: 2m |
![D4370A Archer AX1500 Wi-Fi 6 Wireless Router](https://images.altronics.com.au/thb/d/D4370A.jpg) |
D4370A NEW
|
|
- Equipped with the latest wireless technology, Wi-Fi 6, for faster speeds, greater capacity and reduced network congestion.
- Next-Gen 1.5 Gbps Speeds
- Communicates more data to more devices using revolutionary OFDMA and MU-MIMO technology while simultaneously reducing lag.
- Triple-Core Processing ensures communications between your router and all connected devices are smooth and buffer-free.
- Achieve the strongest, most reliable WiFi coverage with Archer AX1500 as it focuses signal strength to your devices using Beamforming technology and four antennas.
- Increased Battery Life
- Easy Setup: Set up your router in minutes with the powerful TP-Link Tether App.
- Backward Compatible: Archer AX1500 supports all previous 802.11 standards and all WiFi devices.
|
|
This Archer AX1500 Wi-Fi 6 Router you can Wi-Fi 6 efficiently transmits data, enabling data packets for different applications to share one broadcast and cut the latency. |
![T1286A Attachments Pk 4 To Suit T1285A](https://images.altronics.com.au/thb/t/T1286A.jpg) |
T1286A NEW
|
|
|
|
Selection of tips to suit the T 1285A |
![A2260B Attenuator Volume Control 10W 100V Line - Vert.](https://images.altronics.com.au/thb/a/A2260B.jpg) |
A2260B NEW
|
|
Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
![A2260SS Attenuator Volume Control 10W 100V Line - Vert. Stainless Steel](https://images.altronics.com.au/thb/a/A2260SS.jpg) |
A2260SS NEW
|
|
Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
A stainless steel version of our popular Redback 10W volume attenuator. Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
![A2270 Attenuator Volume Control 10W 100V Line - Vert. Surface Mount](https://images.altronics.com.au/thb/a/A2270.jpg) |
A2270 NEW
|
|
Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Designed to control 100V line speaker systems these attenuators have been enclosed in a ABS Flange Mount Enclosure. |
![A2265SS Attenuator Volume Control 40W 100V Line - Vert. Stainless Steel](https://images.altronics.com.au/thb/a/A2265SS.jpg) |
A2265SS NEW
|
|
Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
A stainless steel version of our popular Redback 40W volume attenuator. Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
![A2272 Attenuator Volume Control 40W 100V Line - Vert. Surface Mount](https://images.altronics.com.au/thb/a/A2272.jpg) |
A2272 NEW
|
|
Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Designed to control 100V line speaker systems these attenuators have been enclosed in a ABS Flange Mount Enclosure. |
![Q2022A Audio/Video Cable Tester 13 Way](https://images.altronics.com.au/thb/q/Q2022A.jpg) |
Q2022A NEW
|
|
- All metal construction
- Portable design runs off 9V battery (sold separately)
- Easy to use cable integrity checker for PA and AV installers
- New model supports Powercon and 3.5mm jacks
|
|
Compatible with 3.5mm jack, 6.35mm jack, 3/5/7/8 pin DIN, RCA, 3/5 pin XLR, 4P Speakon, Powercon, banana plugs, RJ45 and USB. A quick and easy way to confirm lead integrity. |
![Q1133B Auto Ranging Digital Multimeter](https://images.altronics.com.au/thb/q/Q1133B.jpg) |
Q1133B NEW
|
|
- Streamlined design, comfortable handle
- Large LCD display makes reading clear
- Strong antimagnetic and anti-interferential performance
- Auto power off when there is no measurement in 15 minutes
- Full function protection
- Unit symbol display, easy to read
- CMOS, TTL logic test; True RMS, NCV, MAX/MIN tests
- Relative value measurement, frequency/ duty cycle test, data hold
|
|
Featuring large, easy to read 20mm digits, this quality mini auto ranging digital multimeter is ideal for mobile technicians, installers or enthusiasts who want excellent performance and functions at an affordable price. |
![Q1068A Autoranging True RMS Digital Multimeter](https://images.altronics.com.au/thb/q/Q1068A.jpg) |
Q1068A NEW
|
|
- Auto ranging with manual override
- Min/max & data hold
- Non contact AC voltage detector
- Frequency/duty cycle measurement
- Temperature measurement
- Backlit LCD screen with bargraph
- Diode test
- Continuity buzzer
- 3 x AAA Batteries included
- Auto power off
- Cat II 1000V, Cat III 600V
|
|
With in-built AC mains detection. This is one of the best digital multimeters we have evaluated when it comes to build quality and feature set. Its perfect for the serious enthusiast or tradesperson. LCD bargraph. 3.75 digit display. Mode assistance indicators. |
![Q1089 Autoranging True RMS Digital Multimeter with NCV](https://images.altronics.com.au/thb/q/Q1089.jpg) |
Q1089 NEW
|
|
- True RMS Auto Range.
- Large easy to read reverse backlit screen.
- Simple push button operation.
- Large multifunction display.
- Indicates correct connection jacks.
|
|
This compact true RMS digital multimeter provides in depth functionality for technicians troubleshooting devices and circuits. |
![A2515 Balanced To Unbalanced Converter XLR-RCA / Screw Term.](https://images.altronics.com.au/thb/a/A2515.jpg) |
A2515 NEW
|
|
- Frequency response: 20 Hz - 20kHz +/- 3dB
- Input level: 0.775Vrms
- Output level: 1.97Vrms (measured at 1kHz with volume control set to max).
- Maximum output level before distortion: +24dBm
- Note the RCA output sockets are in parallel
|
|
Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control (or optional screw terminal connections). |
![S2690A Battery Isolator Key Switch](https://images.altronics.com.au/thb/s/S2690A.jpg) |
S2690A NEW
|
|
- Sturdy construction
- Great compatibility
- Safety protection
- Wide range of applications
|
|
This waterproof battery disconnect switch ins made up of 1 x battery switch, 1 x key and 1 x waterproof cover. |
![X3229 Battery Powered LED Sensor Adhesive Strip Light](https://images.altronics.com.au/thb/x/X3229.jpg) |
X3229 NEW
|
|
- Simple installation anywhere with adhesive backing.
- Switches on automatically when motion is detected.
- 30 second "on" time.
- Fully self contained - no wiring required.
- Ideal for cabinets and wardrobes.
- Requires 4 x AAA batteries.
|
|
This affordable LED strip sensor light includes 1m of adhesive backed warm white LED strip and a PIR simple motion detect controller. It is ideal for wardrobes, cupboards and storage areas where LED lighting is only required when you open the door. |
![Z6439B BBC Micro:bit Board V2.21](https://images.altronics.com.au/thb/z/Z6439A.jpg) |
Z6439B NEW
|
|
- On board speaker
- MEMs Microphone with LED indicator
- Touch sensitive logo
- Built-in sleep/off mode that means the board can be powered-down with batteries connected
- Discrete regulator that can supply up to 190mA of current to external accessories
- 25 Programmable LEDs in a 5 x 5 grid
- 3-axis motion sensing
- On-board magnetometer
- On-board temperature sensor
- On-board light level sensing
- 2 x programmable buttons, A & B
- BLE Bluetooth 5.0
- 2.4Ghz Micro:bit Radio
- Rear-mounted push button
- Power off (push and hold power button)
- 25 pins
- MEMS microphone and LED indicator
- Onboard speaker
- Touch-sensitive logo pin
- LED power indicator
- C++, MakeCode, Python, Scratch
|
|
The Micro:bit is easy to code with, all you need is your web browser and a micro USB cable and you are ready to start all kinds of exciting STEM/STEAM experiments, no need for any extra software to be installed. Micro:bit has also developed a mobile app for coding over Bluetooth (without a USB cable), that makes it even easier to get everyone codin |
![SA0915 Black Arcade Style Momentary Switch](https://images.altronics.com.au/thb/s/SA0915.jpg) |
SA0915 NEW
|
|
- Switch Type: SPST microswitch
- Connection: 6.3mm spade
- Illumination: 5-12V input
- Max material thickness: 30mm
- Mounting Hole: 27.5mm
- Mounting depth: 61mm
|
|
Ideal for use in retro gaming projects or anywhere a jumbo momentary switch may be required. |
![D4426 Blackhawk Trucker Edge Antenna](https://images.altronics.com.au/thb/d/D4426.jpg) |
D4426 NEW
|
|
- Optimum 6 dBi gain for flat and hilly areas
- Extra heavy-duty stainless steel spring
- High-vibration PTL-240 Ultra-Flex cabling
- 4.5 metres of cable with an industry-standard SMA Male connector
|
|
Designed to provide optimal gain across 3G and 4G bands used when travelling throughout Australia & abroad. |
![P8034 Blank Double Width Wallplate](https://images.altronics.com.au/thb/p/P8034.jpg) |
P8034 NEW
|
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
A double width wallplate with matching fascia cover. |
![P1816B Blue 15m Cat6 UTP Ethernet Patch Cable](https://images.altronics.com.au/thb/p/P1806B.jpg) |
P1816B NEW
|
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Blue 15m - Category 6 |
![P1817B Blue 20m Cat6 UTP Ethernet Patch Cable](https://images.altronics.com.au/thb/p/P1806B.jpg) |
P1817B NEW
|
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Blue 20m - Category 6 |
![P1818B Blue 30m Cat6 UTP Ethernet Patch Cable](https://images.altronics.com.au/thb/p/P1806B.jpg) |
P1818B NEW
|
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Blue 30m - Category 6 |
![SA0912 Blue Arcade Style Momentary Switch](https://images.altronics.com.au/thb/s/SA0912.jpg) |
SA0912 NEW
|
|
- Switch Type: SPST microswitch
- Connection: 6.3mm spade
- Illumination: 5-12V input
- Max material thickness: 30mm
- Mounting Hole: 27.5mm
- Mounting depth: 61mm
|
|
Ideal for use in retro gaming projects or anywhere a jumbo momentary switch may be required. |
![A2734 Bluetooth CD & Audio Player/DAB+ & FM Tuner](https://images.altronics.com.au/thb/a/A2734.jpg) |
A2734 NEW
|
|
- BT 5.0 wireless audio receiver
- DAB+ digital tuner
- XLR & RCA outputs for connection to amplifier
- USB MP3 audio playback
- Anti-shock CD player
- Infra-red remote control
- 19” rack mountable housing
- 40 FM radio and 40 DAB+ presets station memories
- Direct access track controls on front panel
|
|
The Bluetooth CD / MP3 audio player is suitable for versatile PA applications (e.g. in theatres, pubs or waiting rooms) and offers special features, e.g. continuous repeat, random replay, MP3 replay of USB storage media and SD memory cards. |
![C9037C Bluetooth® 5.0 True Wireless Earbuds with Powerbank](https://images.altronics.com.au/thb/c/C9037C.jpg) |
C9037C NEW
|
|
- Bluetooth 5.0 offers superior range (up to 20m) & audio quality - plus automatic connection.
- LED power display
- Auto power on, automatic pairing
- Comfortable to wear
- Can be used during intense sports and activities
- Double-eared design, each earphone can be used independently
- Large battery capacity can be used as an emergency mobile phone power bank
|
|
Keep your earbuds charged on the go with the new Bluetooth® 5.0 True Wireless Earbuds. The case features an in-built powerbank to replenish the charge on the earbuds when you're away from power. |
![A4465 BT 5.0 Wireless Audio Receiver Wallplate](https://images.altronics.com.au/thb/a/A4465.jpg) |
A4465 NEW
|
|
|
|
This commercial grade BT 5.0 receiver offers the ability to interface Bluetooth audio devices into public address systems. Balanced audio is relayed back to a Redback solutions receiver. |
![A4520 BT 5.0 Wireless Audio Receivers (Half Rack Box)](https://images.altronics.com.au/thb/a/A4520.jpg) |
A4520 NEW
|
|
- Custom naming for each receiver used in a system.
- UTP output connection for extending signal to system amplifiers using Redback UTP solutions receivers.
- Pairing trigger contacts for use with A4467 remote wallplate or other external switch.
- Adjustable level control.
- External pairing LED output.
- RCA line output for local connection to amplifier.
- 24V DC powered (power supply included).
- Half 19" rack box, can be rack mounted with additional accessories (see below).
- Australian designed and manufactured.
|
|
This commercial grade BT 5.0 receiver offers the ability to interface Bluetooth audio devices into public address systems. |
![P8322A C14 Male Socket Chassis Snap-In 10A IEC](https://images.altronics.com.au/thb/p/P8322A.jpg) |
P8322A NEW
|
|
- Rating: 10A 250V AC (IEC) / 15A 250V AC (UL).
- Dielectric Strength: 2000V AC for 1 minute
- Insulation Resistance: more than 100M Ω at 500V DC
- Body Material: Nylon #66
- Contacts: Tin plated
- Ground Contact: Tin plated
|
|
Rated at 10A @ 240V AC. Chassis mount snap-in. |
![PP6880 Clipsal Pro Blank Wallplate With Removeable Insert](https://images.altronics.com.au/thb/p/PP6880.jpg) |
PP6880 NEW
|
|
|
|
This blank wallplate fits a standard electrical wallbox. It features a removable clip in insert which can be machined by OEMs to suit different connections or switches as required. |
![A4260B Compact 100V Class D Bluetooth PA Mixer Amplifier 120W](https://images.altronics.com.au/thb/a/A4260B.jpg) |
A4260B NEW
|
|
- Mixer amplifier with in-built SD/USB/FM tuner/Bluetooth music source
- 85% efficient class-D power performance
- Low power consumption & heat generation
- Compact 1RU case
- Bass & treble control
- Front panel mic input
- Protection circuitry
- LED indicators for signal, peak, protection and power
- Selectable 100V line/4-16Ω output
- Mic/Line/Phantom Power options on Mic 1-4
- 24V DC battery backup power input
- Emergency priority input (Mic 1)
- Adjustable VOX muting
|
|
This compact Class-D design amplifier offers multi source mixing plus USB/SD card/FM tuner audio playback and Bluetooth streaming functionality. |
![A4262B Compact 100V Class D Bluetooth PA Mixer Amplifier 240W](https://images.altronics.com.au/thb/a/A4262B.jpg) |
A4262B NEW
|
|
- Mixer amplifier with in-built SD/USB/FM tuner/Bluetooth music source
- 85% efficient class-D power performance
- Low power consumption & heat generation
- Compact 1RU case
- Bass & treble control
- Front panel mic input
- Protection circuitry
- LED indicators for signal, peak, protection and power
- Selectable 100V line/4-16Ω output
- Mic/Line/Phantom Power options on Mic 1-4
- 24V DC battery backup power input
- Emergency priority input (Mic 1)
- Adjustable VOX muting
|
|
These compact Class-D design amplifiers offer multi source mixing plus USB/SD card/FM tuner audio playback and Bluetooth streaming functionality. |
![S5578 Cover To Suit Stud Type Surface Mount Circuit Breaker](https://images.altronics.com.au/thb/s/S5578.jpg) |
S5578 NEW
|
|
- Operating Temperature: -40°C to +85°C
- Material: TPE
|
|
These circuit breaker covers, constructed of TPE, are suited to 12V stud type circuit breakers. |
![K8612 CR-10 Smart Pro 3D Printer](https://images.altronics.com.au/thb/k/K8612.jpg) |
K8612 NEW
|
|
- 300°C high temp nozzle.
- 300 x 300 x 400mm build volume.
- HD monitor camera in-built.
- Wi-Fi, Bluetooth and Ethernet connectivity.
- Trapezoidal design for added stability on large volume prints.
- Wide compatability with a variety of filament including PLA, ABS, PVA, TPU, PA, PETG and wood.
- Full-metal dual gear direct extruder.
- CR Touch 16 point automatic levelling sensor or manual levelling as desired.
- LED light bar.
- Spring steel flexible magnetic build plate.
- Silent main board - no noisy stepper motors!
- Filament sensor.
- Pause/resume printing.
- Creality Cloud Printing with iOS/Android app support.
- Supplied mostly assembled to get you printing faster (assembles in under 30 mins).
|
|
The 7 module design of this high performance 3D printer enables assembly within 10 minutes. |
![P0463 Crimp On RF213 Female Line N Type](https://images.altronics.com.au/thb/p/P0463.jpg) |
P0463 NEW
|
|
|
|
Crimp on female line plug to suit RF213 coax. As used in RF 2-way radio communications equipment. |
![P0462 Crimp On RF400 Female Line N Type](https://images.altronics.com.au/thb/p/P0462.jpg) |
P0462 NEW
|
|
|
|
Crimp on female line plug to suit RF400 coax. As used in RF 2-way radio communications equipment.
|
![T1534B Crimping Tool Heavy Duty Anderson / Uninsulated Lugs](https://images.altronics.com.au/thb/t/T1534B.jpg) |
T1534B NEW
|
|
- Crimps copper lug and non-insulated terminals
- Crimps Anderson plug terminals
- Designed with long handles for added leverage on thick walled terminals
- Removable handles for compact storage
- Rotating jaws for changing between crimp sizes
- Chrome plated finish prevents corrosion and protects against wear and tear
- Produces professional quality crimp work
|
|
Rugged cast steel crimper designed for uninsulated cable lugs and Anderson plugs. 6mm2 to 50mm2. Commonly used for making high current battery leads in solar installations. 387mm length. |
![T1533B Crimptool Heavy Duty Lugs 6mm2 to 120mm2](https://images.altronics.com.au/thb/t/T1533B.jpg) |
T1533B NEW
|
|
- Crimps copper lug and non-insulated terminals
- Crimps Anderson plug terminals
- Designed with long handles for added leverage on thick walled terminals
- Rotating jaws for changing between crimp sizes
- Chrome plated finish prevents corrosion and protects against wear and tear
- Produces professional quality crimp work
|
|
Rugged cast steel crimper designed for uninsulated cable lugs and Anderson plugs. |
![LX2081A DA44 TV Signal Distribution Amplifier](https://images.altronics.com.au/thb/l/LX2081A.jpg) |
LX2081A NEW
|
|
- Frequency Range 174~694 MHz (Channels 6 to 51)
- 44dB Maximum Gain
- 10dB Mid-Stage Gain Control
- Single RF Input
- Local or Remote Powering Options
- F-Type Connector for Power Input
- Adjustable Slope Control of 0dB to 10dB
- -30dB Test Point
- Ability to send power out via the RF Input
- High Output Figure: 118dB IMR3 (DIN45004B)
- Connectors: F-Type
- Power Consumption: 300mA
- Operating Voltage: 18V DC
- Operating Temperature: -10ºC to 50ºC
|
|
Kingrays DA44 distribution amplifier has been designed to suit the digital television environment of today and well into the future. |
![T5099 DC Power Control Box](https://images.altronics.com.au/thb/t/T5099.jpg) |
T5099 NEW
|
|
- Pre-wired for simple installation
- 6 rocker switches
- 3 car accessory sockets
- Dual USB. (2.1A/1A) charging ports
- Voltmeter
- 6 Way fuse lock with spare fuses
- Dual Anderson SB50 Style sockets for solar panel & battery
- 6 Cable entries
- Fused Input and output (30A)
- Durable ABS case
- Includes switch icons and word labels
|
|
A complete central power hub for your 4WD, caravan or camping remote power set up. This box contains 6 contura style illuminated switches, 3 car accessory sockets (12V), USB charger, LED volt meter, all protected by a 6 way weatherproof fuse block. |
![P7889 DE-DT12-1 12-Pin 13A IP67 Weatherproof Connector](https://images.altronics.com.au/thb/p/P7889.jpg) |
P7889 NEW
|
|
|
|
World famous IP67 weatherproof pluggable connectors for automotive and industrial wiring. Supplied in a set including crimp pins, gasket, male and female connector bodies. DE-DT12-1 |
![P7888 DE-DT8-1 8-Pin 13A IP67 Weatherproof Connector](https://images.altronics.com.au/thb/p/P7888.jpg) |
P7888 NEW
|
|
|
|
World famous IP67 weatherproof pluggable connectors for automotive and industrial wiring. Supplied in a set including crimp pins, gasket, male and female connector bodies. DE-DT8-1. |
![P1695 DE9 Socket Plug To Terminal Block Breakout](https://images.altronics.com.au/thb/p/P1695.jpg) |
P1695 NEW
|
|
|
|
With this serial terminal block breakout users can make their own custom DE-9 serial interfaces with ease. The casing houses a PCB with screw terminal blocks suitable for use with stranded or solid core copper wire. Once wired up, you can clip the casing closed securely - it can be reopened if require using a small screw driver. |
![D4346 Deco M5 Whole-Home Mesh Wi-Fi Router System - Single Unit](https://images.altronics.com.au/thb/d/D4346.jpg) |
D4346 NEW
|
|
- Deco uses a system of units to achieve seamless whole-home Wi-Fi coverage — eliminate weak signal areas once and for all!
- With advanced Deco Mesh Technology, units work together to form one unified whole-home network with the same network name. Devices automatically switch between Decos as you move through your home for the fastest possible speeds.
- A Deco M5 delivers Wi-Fi to an area of up to 350 square metres. And if that’s not enough, simply add more Decos to the network anytime to increase coverage.
- Deco M5 provides fast and stable connections with speeds of up to 1267 Mbps and works with the major internet service provider (ISP) and modem.
- Deco can handle traffic from even the busiest of networks, providing lag-free connections for over 100 devices.
- TP-Link HomeCareTM provides a suite of personalized and secure features, including Parental Controls, built-in Antivirus and Quality of Service (QoS).
- Setup is easier than ever with the Deco app there to walk you through every step.
|
|
This Deco M5 Whole-Home Mesh Wi-Fi Router System is the ultimate whole-home Wi-Fi solution with comprehensive security and filtering. It delivers fast, uninterrupted Wi-Fi to every room, improving coverage, speed and reducing dead spots. Deco is also easy to set up and grows as you add devices to your home. Dual band AC1300. |
![D4344 DECO X20 AX1800 Whole Home Mesh Wi-Fi 6 System](https://images.altronics.com.au/thb/d/D4344.jpg) |
D4344 NEW
|
|
- Faster Connections: Wi-Fi 6 speeds up to 1,800 Mbps—1,201 Mbps on 5 GHz and 574 Mbps on 2.4 GHz.
- Connect More Devices: OFDMA and MU-MIMO technology quadruple capacity to enable simultaneous transmission to more devices.
- Boosted Seamless Coverage: Achieve seamless whole home coverage with a clearer and stronger whole home Wi-Fi signal generated by Wi-Fi 6.
- Ultra-Low Latency: Greater reduction in latency enables more responsive gaming and video chatting.
- One Unified Network: Multiple units form a whole-home network that auto-selects the best connection as you move around your home.
- Total Security: WPA3 encryption and TP-Link HomeShield provide personalized features, including Parental Controls, Antivirus, and Quality of Service (QoS) to ensure a safer online experience.
- Setup Made Easier Than Ever: The Deco app walks you through setup step-by-step.
|
|
Armed with Wi-Fi 6 technology, Deco X20 whole home mesh Wi-Fi is designed to deliver a huge boost in coverage, speed, and total capacity. Get on the latest mesh Wi-Fi to enjoy the future network that loads faster and connects more. |
![D4345A DECO X20-4G AX1800 4G+ Mesh WiFi 6 Gateway](https://images.altronics.com.au/thb/d/D4345A.jpg) |
D4345A NEW
|
|
- Internet Everywhere with 4G+ Speed - Provides WiFi 6 Mesh coverage through 4G+ CAT6 access
- Superior WiFi 6 speeds up to 1.8 Gbps - 1201 Mbps (5 GHz) and 574 Mbps (2.4 GHz) dual-band WiFi with WiFi 6 technology
- Fully Gigabit Ethernet - 3x Gigabit WAN/LAN Ethernet ports provide flexible internet access at warp speed**
- TP-Link HomeShield - Real-time IoT and network protection, robust Parental Controls, and comprehensive reports
- 3G/4G Failover - Flexible access from Ethernet to 3G/4G to prevent data loss
|
|
Armed with a built-in 4G+ modem, WiFi 6, and TP-Link Mesh technology, Deco X20-4G delivers hassle-free 4G internet sharing with a superior whole-home mesh WiFi experience. Plug your SIM card in and enjoy! |
![D2322A Desk Mount 15W USB Qi Wireless Fast Charger](https://images.altronics.com.au/thb/d/D2322A.jpg) |
D2322A NEW
|
|
|
|
This ultra-slim desk mount 15W wireless charging pad offers convenient device charging for your workspace. It fits into a 60mm diameter desk hole and provides cable free charging for your phone while you work. Includes power adaptor and USB cable - nothing more to buy! |
![D5508A Desktop USB 3.0, 2.5/3.5](https://images.altronics.com.au/thb/d/D5508A.jpg) |
D5508A NEW
|
|
- Designed for direct insertion of one 2.5 inch or 3.5 inch SATA HDD/SSD
- USB 3.0 SuperSpeed Interface, transfer rates up to 5Gbps
- Backwards-Compatible with USB 2.0, transfer rates up to 480Mbps
- Touch Control ON/OFF switch
- LED light indicates Power and Activity status
- Hot-swappable, plug and play, no drivers needed
- Support UASP (USB Attached SCSI) for Windows 8 and above, Mac OS 10.8 and above
- Compatible Operating Systems: Windows XP and above (32/64-bit), Mac OS 10.4 and above, Linux.
|
|
Take advantage of the latest high speed USB 3.0 transfer rates with this 2.5/3.5 SATA drive docking station. The dock station allows for a high effective heat dissipation. It offers swappable access to 2.5" and 3.5" SATA HDD/SSD without having to mount the hard drive or install it in an enclosure. |
![TD1532 Deutsch DT Series Connector Crimping Tool (Size 12)](https://images.altronics.com.au/thb/t/TD1532.jpg) |
TD1532 NEW
|
|
|
|
Suits up to size 12 terminal pins used in Deutsche DT series connectors
|
![TG1532 Deutsch DT Series Connector Crimping Tool (Size 20)](https://images.altronics.com.au/thb/t/TG1532.jpg) |
TG1532 NEW
|
|
|
|
Suits up to size 20 terminal pins used in Deutsche DT series connectors
|
![Q2007 Digital Audio Impedance Meter](https://images.altronics.com.au/thb/q/Q2007.jpg) |
Q2007 NEW
|
|
- Suitable for 50V, 70V and 100V line speaker systems up to 5kW
- Also suitable for measuring low Impedance speaker loads of 4 -16Ω
- OLED display shows Impedance and Wattage of the load
- 1Ω to 20KΩ test range
- Auto ranging
- Display accuracy +/-10%
- Push button operation
- System Check Mode (20, 60 or unlimited minutes)
- 5V Rechargeable Lithium Polymer internal battery
- Low battery indication
- Buzzer and Haptic feedback option via Menu access
- USB Charging lead supplied
- Silicon Test Leads supplied
- Soft Carry Case Included
- Rugged yet easy to hold compact hand held case
|
|
An absolute necessity for all PA system installers. This impedance meter for ‘dummies’ designed and manufactured by Altronics calculates and displays speaker loads in watts. Lithium rechargeable version. |
![P2382A DIN Rail Labels 51-100 Suit 35A Terminals](https://images.altronics.com.au/thb/p/P2375.jpg) |
P2382A NEW
|
|
|
|
Terminal labels numbered 51 to 100. Suit the following 35A DIN Rail terminals: P 2403, P 2408, P 2411, P2414.
*Pic for illustration purposes. |