Description Ordering
A4599 Lockdown/Chime/Fire/Cancel Remote Wall Plate

Lockdown/Chime/Fire/Cancel Remote Wall Plate

A4599

Redback WallPlate allows the A 4505 Lockdown Timer to be controlled remotely. Featuring Lockdown, Fire, Chime and Cancel buttons, the plate can be located up to 100m away from the main unit.
H5111 1U Raw Aluminium 19

1U Raw Aluminium 19" Rack Panel

H5111

Ideal for professional looking custom switch panels, control panels or to fill in blank spaces of rack frames. All models feature integral ribs on the rear for extra strength and rigidity of the panel.
C0491 Microphone Mini Tripod Stand

Microphone Mini Tripod Stand

C0491

Mic stand has fold in legs and stands 86mm high when extended. With standard 5/8" thread.
C0410 330mm Natural Gooseneck Microphone Extension

330mm Natural Gooseneck Microphone Extension

C0410

Microphone gooseneck incorporating 5/8" thread male to female. Matching bench mount bases C 0420/21. 300mm Chrome.
C0405 Spring Loaded Microphone Holder

Spring Loaded Microphone Holder

C0405

Spring loaded mic holder, uses 5/8" thread to enable direct fitting to most mic stands and goosenecks.
C7192B UHF Handheld Mic Transmitter 640-664Mhz 96 Channel

UHF Handheld Mic Transmitter 640-664Mhz 96...

C7192B

Handheld transmitter. 640-664MHz. Please ensure your system is compatible with this frequency before making your purchase.
A2516 Unbalanced To Balanced Converter XLR-RCA / Screw Term.

Unbalanced To Balanced Converter XLR-RCA /...

A2516 NEW

Unbalanced 10K Ohm 2 x RCA to balanced 600 Ohm 3 pin male XLR (or optional screw terminal connections) with level control.
C0412 450mm Natural Gooseneck Microphone Extension

450mm Natural Gooseneck Microphone Extension

C0412

Microphone gooseneck incorporating 5/8" thread male to female. Matching bench mount bases C 0420/21. 450mm Chrome.
C7317A UHF Wireless Dual Microphone Receiver 640MHz Module

UHF Wireless Dual Microphone Receiver 640M...

C7317A

Designed to fit the portable PA systems that are 640MHz. Please check the frequency of your microphones/Okayo PA before making your purchase.
A4942 3 Pin XLR Cat5 Extender (Receiver)

3 Pin XLR Cat5 Extender (Receiver)

A4942

The Redback® A 4942 receives audio from compatible Redback® Cat5e/6 transmitters and converts the signal to a balanced XLR output. The output level is DIP switch selectable, and the ouput volume is screwdriver adjusted via the trimpot on the front of the unit.
C0402 22mm Flexible Microphone Holder

22mm Flexible Microphone Holder

C0402

Designed to suit narrow bodied hard wired mics. Uses standard 5/8" thread to enable direct fitting to most mic stands and goosenecks. Features flexible plastic to allow the accommodation of a variety of microphone sizes.
D0981 Maono AU-GM31 USB Gaming Microphone

Maono AU-GM31 USB Gaming Microphone

D0981

This omnidirectional microphone provides quality audio for gaming streams, YouTube recording and video calls. It features an adjustable gooseneck in a paging console style desktop case.
H4993 Half Rack Plastic In Fill Panel to Suit H4990

Half Rack Plastic In Fill Panel to Suit H4990

H4993

H4993 is used to fill in the unused section when only one unit is fitted to the H4990.
C0420 Natural Gooseneck Microphone Base

Natural Gooseneck Microphone Base

C0420

Has a 5/8" male thread one end and 5/8" female thread other end. Screws included. Chrome base
A4826 3 Pin XLR Balanced & Stereo RCA Output UTP Balun Wallplate

3 Pin XLR Balanced & Stereo RCA Output UTP...

A4826

This 3 pin XLR Balanced and Stereo RCA output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
C7203B Wireless UHF 640MHz Link Transmitter

Wireless UHF 640MHz Link Transmitter

C7203B

This Wireless Link Transmitter is an optional extra for the Okayo Compact 40W and 80W Portable PA Systems. It operates on 640MHz, please check your system specification/model before making your purchase.
C0347 Windsock to suit C0361

Windsock to suit C0361

C0347

Used to negate breath noise and eliminate wind or breath “pop”. Suits C 0361 shotgun microphone.
A4835 Active Three Pair Audio Signal Distribution Receiver

Active Three Pair Audio Signal Distributio...

A4835

This audio distribution system uses affordable UTP cabling to send up to three balanced inputs (terminal block) or mono RCA signals over long distances.
C7194A Charging Pod To Suit C7195C Beltpack Transmitter

Charging Pod To Suit C7195C Beltpack Trans...

C7194A

This charging pod will charge 2x C7195C belt pack transmitters so you don't have to keep changing the batteries .
H5150 2U Vented Snap In Steel 19

2U Vented Snap In Steel 19" Rack Panel

H5150

A real time saver for the installer, these snap in rack panels provide instant in-fill between equipment in 19" rack systems. Ideal for any 19" rack system which requires additional airflow to help keep equipment cool. They require no cage nuts, bolts or tools and are easily removed and relocated if required by pushing the two pressure clips inward
C0400 3 Microphone Holder Crossbar

3 Microphone Holder Crossbar

C0400

Enables 3 microphones to be mounted on a single mic stand. Simply screws on to the 5/8” thread then the mic holders screw to the crossbar.
H5112 2U Raw Aluminium 19

2U Raw Aluminium 19" Rack Panel

H5112

Ideal for professional looking custom switch panels, control panels or to fill in blank spaces of rack frames. All models feature integral ribs on the rear for extra strength and rigidity of the panel.
T3102 Canned Smoke For Testing Fire Alarm Detector 150ml

Canned Smoke For Testing Fire Alarm Detect...

T3102

Canned smoke allows you to meet fire system test requirements without contaminating the smoke detector. The unique formula does not affect detector sensitivity or increase the risk of false alarm. The smoke is non-toxic and dissipates quickly allowing you to test multiple detectors easily. 150ml Aerosol can w/ extension lid
A6530 Programmable Universal 7

Programmable Universal 7" Touchscreen Wall...

A6530 NEW

This universal 7" touchscreen wallplate is the perfect control system for commercial and domestic automation. Its stylish low profile design lends itself to installation in new modern homes, classrooms, lecture theatres or corporate boardrooms.
H5612 12U 450mm Deep 19

12U 450mm Deep 19" Rack Frame Panel Set

H5612

These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi
H5452 12U 600mm Deep 19

12U 600mm Deep 19" Rack Frame Panel Set

H5452

Panel sets provide a neat finish, concealing all enclosed equipment and prevent unauthorised access to the rack. Each set includes a solid top panel and two side panels.
C7285 19

19" Rack Mount Kit To Suit Okayo Transmitt...

C7285

Rack Mounting Kit to suit C 7280, C 7281, C 7281A, C 7282 and C 7282A. Note: this is only required if mounting a single unit into a 19" rack.
C8915 Aerobics Beltpack Pouch

Aerobics Beltpack Pouch

C8915

Soft protection pouch for beltpack (lavalier) transmitter units.
A0642B Telephone Line Isolation Unit

Telephone Line Isolation Unit

A0642B

By law any radio, amplifier etc connected to a telephone system (for background music or paging applications) must be isolated with a line isolation unit (LIU). Adjustable output level suits all telephone systems.
C8893B Wireless UHF Beltpack Mic 700 Channel

Wireless UHF Beltpack Mic 700 Channel

C8893B

Beltpack transmitter ideal for use with the Redback 700 channel receiver unit (C 8890B).
A2501 Globe For H5194

Globe For H5194

A2501 ROHS

Spare globe to suit the A 2499 and A 2500 gooseneck lights. 12VDC 5W
A4940  3 Pin XLR Cat5 Extender (Transmitter)

3 Pin XLR Cat5 Extender (Transmitter)

A4940

Allows balanced signals to be transmitted over long distances using economical UTP data cabling.
C0512A 145cm Microphone Stand Diecast Round Base

145cm Microphone Stand Diecast Round Base

C0512A

Sturdy telescopic stem with friction grip adjustment. Includes screw adaptor attachment (5/8&quot) for mic holder etc. 80cm to 145cm
C0458 5 pin XLR White Wallplate with Microphone Clip

5 pin XLR White Wallplate with Microphone ...

C0458

This 5 Pin XLR wall plate are fitted with a clip for holding supermarket microphones.
A6541 Programmable Universal 4.3

Programmable Universal 4.3" Touchscreen Wa...

A6541 NEW

This universal touchscreen wallplate is the perfect control system for commercial and domestic automation. Its stylish low profile design lends itself to installation in new modern homes, classrooms, lecture theatres or corporate boardrooms.
C8816 UHF Tour Guide System Replacement Earphone

UHF Tour Guide System Replacement Earphone

C8816

A replacement earphone for C 8812 tour guide receiver.
A4816 Dante Mic/Line 4 Input, 2 Output Dual Wallplate

Dante Mic/Line 4 Input, 2 Output Dual Wall...

A4816

Dante Interface 4 x Mic/Line Inputs, 2 x Line Outputs
A4827 3 Pin XLR Line/Balanced Output UTP Balun Wallplate

3 Pin XLR Line/Balanced Output UTP Balun W...

A4827

This 3 pin XLR Balanced Output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
H5438A 38U 600mm Deep 19

38U 600mm Deep 19" Rack Frame

H5438A

These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment.
H5186 Blanking Plate To Suit H5185

Blanking Plate To Suit H5185

H5186

Blanking plate powdercoated in the same colour as the main panel.
H5397 Natural Nylon Washer Pk 1000

Natural Nylon Washer Pk 1000

H5397

Nylon washer clear suit M6 Pack Qty: 1000
A1730 10 Way MP3 Message Player

10 Way MP3 Message Player

A1730 NEW

This compact message player can be custom programmed  with tones, messages or music for use in interactive displays, security, customer entry  and emergency evacuation announcements.
H5174 Blanking Plate to Suit H 5170 / H 5172 Pk6

Blanking Plate to Suit H 5170 / H 5172 Pk6

H5174

Blanking panel for H 5170 and H5172 Pk. 6
A4566 In-Line 22uF Speaker line Isolator Box

In-Line 22uF Speaker line Isolator Box

A4566

A simple in-line connection box fitted with a line monitoring capacitor. Since many 100V speakers do not have 22μF capacitors fitted, this box allows you to easily add it into the circuit for connection to a line monitoring system.
H5538A 38U 450mm Deep 19

38U 450mm Deep 19" Rack Frame

H5538A

These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment.
A4822 Stereo RCA Input UTP Balun Wallplate

Stereo RCA Input UTP Balun Wallplate

A4822

This Stereo RCA input wallplate can be used in a stand-alone point to point basis, allowing signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
H5168 1U 2 Way 'D' Series Connector 19

1U 2 Way 'D' Series Connector 19" Patch Pa...

H5168

Pre-punched 1RU rack panel with two sets of D series compatible mounting holes. This panel is ideal for test connections in 19" rack systems. Tough black powder coated finish.
C0513 Carry Bag To Suit Microphone Floor Stands

Carry Bag To Suit Microphone Floor Stands

C0513

Heavy duty nylon zip lock bag specially designed to protect your microphone stands from the rough treatment dished out by life on the road. Features a convenient adjustable carry strap.
HC5386B M6 Silver Pan Pozi Rack Bolt Jar 100pcs

M6 Silver Pan Pozi Rack Bolt Jar 100pcs

HC5386B

M6 x 16mm zinc plated Pack Qty: 100
H4603A 2U Cable Hanger 19

2U Cable Hanger 19" Rack Panel

H4603A

Keeps your leads neat and tidy with this cable support panels. They will not only take the strain off the connections, but also give you a means to organise your cables so you can find the lead you want quickly.

All prices include GST