|
Description |
Downloads |
Specs |
Ordering |
|
|
C0330B |
|
|
|
0.75m curly cable to suit CB fist type microphone. Bare end connection for terminating to OEM equipment or with the connector of your choice. |
|
A2711 |
|
- Output level: 500mV(800mV volume max.)
- Playback frequency: 20Hz - 19KHz
- THD: <0.3%
- Signal to noise ratio: >65dB
- File types: MP3/WMA/WAV
- MP3/WMA decoder: 32-320kbps decoding
- WAV decoder:
- PCM single track 128-768kbps
- PCM double track 256-1536kbps
- IMA-ADPCM single track 32-192kbps
- IMA-ADPCM double track 64-384kbps
- Storage: USB/SD Card (maximum 32GB - FAT16/32)
- Supply voltage: 12V DC (10-15V operating range)
- Power consumption: <2W
- Dimensions: 120W x 56.5D x 22H mm
|
|
Optional Plugin Board to suit the A4275 and A4285 mixer amplifiers. Enables audio playback of MP3 files from USB stick and SD memory cards. |
|
C8868C |
|
- 16 Channels in 520 - 550MHz UHF Band
- RF and AF signal presence LEDs
- Tone squelch circuit for noise reduction
- Range up to 70m in ideal conditions
- 6.35mm unbalanced line/mic output
- 3 pin balanced XLR mic output
- Microphone transmitters require 2 x AA batteries (not included).
|
|
The perfect entry level 16 channel UHF wireless microphone system for clubs, restaurants, function centres, wedding ceremonies etc. It produces a clear, crisp vocal reproduction, whilst allowing freedom of movement. Supplied as a complete "ready to go" system with a beltpack/lavalier microphone transmitter. |
|
A4255A |
|
- Compact 1RU 19” rack mount design
- Balanced mic or line input
- 100V line output
- VOX muting
- Phantom power
- Four auxiliary inputs
- 3.5mm Jack Input (Front Mounted)
- Overload limiting
- Over voltage limiting
- On demand fan cooling (60W and 100W versions only)
- Over temperature shut down protection
- Dual input connectors
- Variable input sensitivities
- 240V AC / 24V DC operation
- Australian designed & manufactured
|
|
These compact 1RU rack mount amplifiers are suitable for both stand alone PA system use, or as zone amplifiers in larger systems requiring local inputs. All models operate on 240V ac or 24V dc for battery backup operation. |
|
C0354 |
|
- Impedance: 500Ω balanced, dynamic
- Sensitivity: -80dB ±3dB
- Frequency response: 60Hz - 12KHz
- Length: ≈460mm
- Polar pattern: Cardioid (unidirectional)
- Switch: Momentary PTT
|
|
A high performance dynamic microphone with in-built PTT switch in the head for paging systems. Complete with flexible gooseneck and built in 3 pin male XLR connector, it is ideal for paging consoles and general announcing requirements in factories, warehouses, food outlets and venues. |
|
A4240A |
|
- Compact 1RU 19” rack mount design
- Balanced mic or line input
- 100V line output
- Phantom power
- Overload limiting
- Over voltage limiting
- On demand fan cooling (60W and 100W versions only)
- Over temperature shut down protection
- Dual input connectors
- Variable input sensitivities
- 240V AC / 24V DC operation
- Australian designed & manufactured
|
|
These compact 1RU rack mount ampliers are suitable for both stand alone PA system use, or as zone ampliers in
larger systems requiring local inputs. All models operate on 240V ac or 24V dc for battery backup operation. |
|
A4930 |
|
- Connects to A 4931 transmitter wallplate or other Redback UTP transmitter (see connection matrix)
- Connect up to four audio zones together.
- Easy Cat5e/6 UTP data cabling connection.
- Up to 300m cable runs out to zones.
- Balanced Euro terminal block connections.
- Balanced mic or line level operation.
- 24V DC operation.
- Australian designed & assembled.
|
|
This Microphone/Line Hub is designed to accept audio from up to four A 4931 Mic/Line Preamp wallplates. The Hub has a dedicated output for each wall plate, with front mounted volume controls for each output. |
|
A4024 NEW
|
|
- VOX muting on input 1.
- Balanced microphone inputs.
- Output muting circuit.
- Stereo line inputs & tape output.
- Bass and treble tone controls.
- Output terminals for 100V line and 8 - 16Ω loads
- Over-voltage, over current, thermal run-away and short circuit load protection.
- Muting Features: VOX Muting Via Input 1, Switch Contacts and Output Muting
|
|
A staple of the Redback range since we first started, the 30W amplifier meets the requirements of small to medium public address installations. |
|
C8862B |
|
- Exceptional performance.
- Anti-roll band
- Textured body
- Requires 2 x AA batteries (either alkaline or rechargeable).
|
|
Suits C 8860B 520-550MHz Receiver.
Handheld Transmitter:
- Exceptional performance.
- Anti-roll band
- Textured body
- Requires 2 x AA batteries (either alkaline or rechargeable). |
|
C0392 |
|
- High end vocal reproduction, suitable for both entertainers and general announcing.
- Reversible plate for locking switch plate into the on position - ideal for vocal applications.
- Tough zinc diecast body and built for the rigours of regular use on stage.
- Silent action reed on/off switch for minimising handling pops and feedback noise.
- Includes 6m heavy duty 3 pin XLR connection cable.
- Includes carry case.
|
|
This fine quality microphone has been styled on the famous Shure&trade Bros SM58. In our opinion the reproduction is every bit as good as the genuine article. Housed in a sturdy diecast body and fitted with a silent action reed type on/off switch. |
|
C8841A |
|
|
|
Suitable for Redback radio microphone installations requiring extended operating range ie: supermarkets, shopping malls, function centres etc. Provides 9dB of gain at 800MHz enabling installation up to 50m from the receiver when using |
|
A2265A |
|
|
|
New models supplied with two facia covers to suit your decor.
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
|
A4235 |
|
- Compact 1RU 19” rack mount design
- Balanced mic or line input
- 100V line output
- VOX muting
- Phantom power
- Four auxiliary inputs
- Overload limiting
- Over voltage limiting
- On demand fan cooling
- Over temperature shut down protection
- Dual input connectors
- Variable input sensitivities
- 240V ac / 24V dc operation
|
|
These compact 1RU rack mount amplifiers are suitable for both stand alone PA system use, or as zone amplifiers in larger systems requiring local inputs. All models operate on 240V ac or 24V dc for battery backup operation.
All models include a choice of |
|
A6505A |
|
- Compatible with Redback Touch control wallplates or third party serial control systems.
- Two RS232/485 inputs.
- Three relay outputs.
- PIR motion detect sensor trigger input.
- Infra-red control input.
- Wallplate connection via standard UTP cabling.
- Powered by 24V DC input (passes power to wallplate – power supply sold separately)
- Australian Designed & Manufactured.
|
|
Designed to be used in conjunction with the A 6500A programmable touchscreen wallplate, this control hub enables the control of a variety of devices. Connection to the A 6500A wallplate is via Cat5/6 cable up to 50m away. Now with PIR trigger input. |
|
C0398 |
|
- Insert: Electret
- Impedance: 600 Ohms balanced
- Sensitivity: -66dB ±3dB
- Frequency response: 80Hz - 18kHz
- Directivity: Cardioid
- Operating Voltage: 1.5V ~ 10V DC (RL = 680Ω)
|
|
A miniature electret lapel microphone with integral clip. Supplied with a balanced lead with mini 3 pin XLR plug. Features excellent pickup characteristics, dynamic range and requires phantom power (see C 0358). Perfect for lecturers, spruikers, presente |
|
C8864B |
|
- Compact & lightweight
- Fitted with 3 pin mini XLR microphone
- On / Off / Mute switch
- Gain control
- Switchable impedance between mic & instrument pickup
- Requires 2 x AA batteries (either alkaline or rechargeable).
|
|
Suits C 8860B receiver (520-550MHz)
Beltpack Transmitter:
- Compact & lightweight
- Fitted with 3 pin mini XLR microphone
- On / Off / Mute switch
- Gain control
- Switchable impedance between mic & instrument pickup
- Requires 2 x AA batteries (either alkaline or recharge |
|
A4370A |
|
- Robust design incorporating latest Mosfet technology
- Very Low noise and distortion
- 70V, 100V and 4-16Ω outputs
- 240V AC or 24V DC operation
- 24V DC @ 1 Amp output for external devices
- Multi stage thermally cued fan cooling
- Output Peak Limited
- Thermal Overload protected
- Signal Presence Indicators
- Fault Indicators
- Power Status Indicators
- Rack Mountable (suits 19 inch racks)
|
|
This range of booster amplifiers are ideal for installations requiring high power zone amplifiers. Simply choose a power rating according to the wattage required for each zone. |
|
C8907 |
|
- Type: Uni-Directional Electret Condenser
- Sensitivity: -47 ± 4 dB
- Frequency Stability: 100 ~ 20,000Hz
- Max. Operation Voltage: 10V
- Standard Operation Voltage: 1.5V
- Current Consumption: Max. 0.5mA
- S/N Ratio : >60dB
- Dimension: 13W x 37D mm
- Standard Accessory: Windscreen & Tie Clip
- Lead Length: 1.2m
- Connector: Mini XLR 3-pin
|
|
The Redback Lapel microphone is designed to provide clear microphone pick-up in a discrete package. Incorporating a high definition microphone insert for crystal clear pickup of speech.The microphone simply clips onto your garment and plugs into the Redba |
|
A4433 |
|
- Connects to A4432 mixer and A4931/32 local input
- Provides input selection options for four sources.
- Local volume level control.
- Selected source level control.
- Fits standard electrical wall box.
- Easy connection to A4432 via Cat5e/6 UTP data cabling.
- Powered over ethernet.
- Australian designed & assembled
|
|
A touchscreen control wallplate to suit the A 4432 Redback mixer. Allows quick and easy source selection, muting, level control for programming, plus local input level control (when used with A 4931/ A 4932). |
|
C0456A |
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
5pin XLR microphone connector mounted horizontally on a dual face wall plate. "One-Shot" versions with screw terminal connections for quick and easy connection on site. |
|
C0444 |
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
3pin XLR microphone connector mounted horizontally on a dual face wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. |
|
A1932A |
|
- Powered by nominal 24V DC
- 100V line audio output
- Line level audio input - 600mV
- Short circuit, overload, and thermal cutout protection
- Bolt-in chassis construction
- Australian designed and assembled
|
|
This module is designed for use in emergency evacuation systems and is powered by an external 24V DC source. It accepts a line level audio input and produces a 100V line output via a transformer. |
|
C8847 |
|
- Connector types: BNC, jack
- impedance: 50 Ω
- Power requirements: 10 to 15 volts DC offset from the coaxial connection, 50 mA
- Receiving mode (3 dB beamwidth) : 70 Angle
- Third-order overload pay cut point (OIP3) : > 30 dBm
- Antenna gain (axis) : 5.8 class: : dBi
- The signal gain + 10 dB (plus or minus 2 dB) :
- Size: 283 mm x 270 mm x 25 mm (height x width x depth)
- Mounting: 5/8" mini microphone type thread
|
|
A wideband 500 to 950MHz frequency antenna for improving transmission quality and range. It is ideal for
installations using wireless mics, tour guide systems or in ear monitoring over long distances. Suitable for stand
mounting, the antenna may also be suspended from the ceiling or wall mounted using the optional C 8848
bracket. C 8847 includes |
|
A2069 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
The Redback® A 2069 Remote Plate allows the Redback® A 4505 Lockdown Timer to be controlled remotely. Featuring Lockdown, Fire, Chime and Cancel buttons, the plate can be located up to 100m away from the main unit. Connections up to 30m away can be made via standard Cat 5 cabling. |
|
C0388 |
|
- Polar Pattern: Unidirectional (cardioid)
- Impedance: 250 Ohm
- Sensitivity: -72dB ±3dB
- Frequency Response: 60Hz-16kHz
|
|
This excellent professional dynamic microphone is suitable for the most demanding vocal applications. It allows performers to deliver vocal power and clarity even in the most acoustically adverse venues. |
|
A4469 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
The A4469 zone relay unit may be installed remotely and has been designed to switch either low level inputs or amplifier outputs and interfaces the A4660 paging console with existing PA systems. |
|
C0421 ROHS
|
|
|
|
Has a 5/8" male thread one end and 5/8" female thread other end. Screws included. Black base |
|
A6507 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
This compact module includes a seven step 100V line speaker attenuator/volume control which can be remotely adjusted via RS 485 serial control. |
|
C0515A |
|
|
|
Sturdy telescopic stem with friction grip adjustment and foldup legs. Includes screw adaptor attachment (5/8") for microphone holder etc. Height adjusts from 96 to 160cm with 70cm adjustable boom. |
|
A5135 |
|
- Connects to four paging microphones via A 5138 wallplates or other Redback UTP transmitter at each location
- Built for supermarkets, food outlets or anywhere multiple paging microphones are in use
- Easy Cat5e/6 cabling back to hub
- Adjustable VOX sensitivity
- PTT muting
- 24V DC operation
- BGM input
- Balanced & line outputs
- Australian designed & assembled.
|
|
Designed with small supermarkets in mind. We've designed the hub to cater for industry standard supermarket 5 pin XLR microphones which connects to a local wallplate (A 5138) over a Cat5/6 cable. |
|
C8844B |
|
- Frequency Range: 500MHz-1GHz
- Voltage Standing Wave Ratio : <2
- Input Impedance: 50 ohms
- Isolation: 12dB
- Loss: <4.5dB
- RF Connector: BNC Female Type
- Dimensions: 40W x 32D x 28Hmm
|
|
This splitter can be used to split a reception signal into two outgoing signals (one input to two output) or combine two reception signals into one outgoing signal (two input to one output). |
|
C8911A |
|
- Type: Electret
- Impedance: 600 Ohm ± 30%@1KHz
- Frequency Response: 100Hz-14,000Hz
- Sensitivity: -62dB @ 1KHz
|
|
The Redback Sports Headband Microphone is designed to provide trouble free performance even through the most vigorous of workouts. A semi-rigid gooseneck ensures the microphone remains steady during heavy exercise and is molded to fit comfortably over t |
|
C0363 |
|
- Impedance: 500Ω
- Sensitivity: -76dB ±3dB
- Frequency Response: 100Hz-10KHz
- Length: ≈325mm
- Directivity: Unidirectional
|
|
This elegant gooseneck microphone features smooth, brilliant sound with excellent ambient noise control and feedback rejection. It's screw base is suitable for mounting on equipment or permanent desk mounting . The slimline design of this mic makes it id |
|
A2262 |
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
New models supplied with two facia covers to suit your decor.
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. They feature 11 position switches |
|
A4931V |
|
- Input Mic Level Sensitivity: 3mV
- Input Line Level Sensitivity: 1V
- Music Input Level Sensitivity: 500mV
- Output Connector: RJ45 8P8C
- Input Connectors: Audio: 3 pin XLR balanced 2 x RCA, 3.5mm JACK
|
|
This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub. |
|
C0484 |
|
|
|
Flush mount friction fit gooseneck base.
Suitable for
C 0410-C 0413 goosenecks.
Mounting hole size: 50.5mm. |
|
C0351A |
|
- Insert: Electret
- Impedance: 250Ω balanced
- Sensitivity: -52dB ±3dB
- Frequency response: 30Hz - 18kHz
- Polar pattern: Cardioid/Fig 8/Omni/Variable
- Dimensions: 100L x 93W x 26Hmm
|
|
This boundary microphone is designed to be surface mounted and is fitted with a high sensitivity electret insert. The sturdy diecast case and steel grille offers robust protection, while the rubber base plate minimises vibration pickup. A front panel on/o |
|
A4420C NEW
|
|
- 6 microphone and 2 line inputs
- All mic inputs are 3 pin XLR balanced
- Line inputs via twin RCA sockets
- Separate bass and treble tone controls
- Individual input and master volume controls
- Optional VOX muting of line inputs
- Optional phantom power for each mic input
- Microphone bass cut internally selectable
- Mic inputs routed via tone controls or bypassed
- 24VDC input
|
|
This 8 channel mixer incorporates a variety of practical features ensuring suitability for a wide scope of PA and sound reinforcement applications. |
|
C8893D |
|
- Compact & lightweight
- Fitted with 3 pin mini XLR socket
- On / Off / Mute switch
- Gain control
- Requires 2 x AA batteries (either alkaline or rechargeable).
|
|
Beltpack transmitter ideal for use with the Redback 700 channel receiver unit (C 8890D). |
|
A4476 |
|
- Remote preset selection
- Cat5e connection
- LCD indicates presets available
|
|
The A4476 wallplate is used to provide local access to presets programmed into the A4480B. |
|
A2267 |
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
New models supplied with two facia covers to suit your decor.
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. They feature 11 position switches |
|
A4275C |
|
- Very low noise and distortion
- Thermal overload protection
- Thermally cued forced fan cooling
- Protect Mode
- 4 levels of priority/Vox muting
- LCD display of amplifier status
- Minimum and Maximum Master Volume Over-ride
- Minimum and Maximum Remote Volume Over-ride
- USB keyboard interface for labelling of inputs and installer contact details. • 6 inputs configurable as balanced microphone or line
- Music Input on front panel
- Adjustable line level sensitivity
- 70V, 100V and 4-16ohm outputs
- 240V AC or 24V DC operation
- 300mA Backup Battery charging
- Phantom power (on microphone inputs)
- Tape out (Dual RCA)
- Pre-amp send and return connections (RCA)
- Balanced line output (3 pin male XLR)
- Remote Volume option
- 24V switched output via PTT microphone (not supplied)
- 19” Rack Mount (2 unit).
- Optional Alert/Evac tones with voice-over message (via A 4573 module)
- Optional MP3 input with remote control (via A 2711 module)
|
|
Engineered for professional PA installations, the A 4275C conservatively delivers 125W RMS power. Including three levels of input priority, bass and treble controls and phantom powering capability enable unparalleled flexibility for a wide scope of applications such as schools, shopping centres, workshops, mine sites and office buildings. |
|
A1117 NEW
|
|
- Compact Class D stereo 2 x 15W (into 4Ω)
- Bluetooth 5.1 connectivity
- Upgrade your favourite speakers to Bluetooth wireless
- Includes mains power supply
- Excellent range and audio clarity
- Suitable for in-ceiling mounting
- Assignable bluetooth device name and password
|
|
This Bluetooth mini amplifier is a great way to add wireless connectivity to a new or existing pair of ceiling or wall speakers that aren't Bluetooth equipped. It offers Bluetooth 5.1 connectivity for excellent device range and audio performance, coupled with an efficient Class-D amplifier. |
|
A2266 |
|
|
|
New models supplied with two facia covers to suit your decor.
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. They feature 11 position switches |
|
C0413 |
|
|
|
Microphone gooseneck incorporating 5/8" thread male to female. Matching bench mount bases C 0420/21. 450mm Black. |
|
A6512 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
These compact modules are designed to remotely alter the volume of any low level signal source feeding any amplifier or mixer remotely, via RS 232 or RS 485 serial control. They will interface with the Redback A 6500 wallplate or any other 3rd party control system. Requires 24V DC power supply. Includes one input with remote volume adjustment via s |
|
A4581 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
Allows the A4565A & A4500B alert/evac units to be activated remotely. Featuring alert, evacuation and cancel buttons with protective "flip up" covers to prevent accidental operation. |
|
A4565A |
|
- Tones conform to AS 1670.4
- Standard 1U 19” rack mount case
- Interfaces with Fire Indicator Boards
- Remote operation of Alert, Evac, Chime, Fire Test, Fire Alarm & Cancel tones
- MP3 based tone playback (with backup hard coded Alert, Evac and Bell tones)
- 24V DC operation
- Auto/Manual/Isolate keyswitch
- Key switch to 003 standard
- Local operation of Alert, Evac and PA
- MP3 based Voice Over messages for Alert and Evac cycles
- Microphone socket for PA use
- Provision for BGM (back ground music)
- Provision for Auxiliary input with front volume control
- Bell chime facility
- Switched 24V DC output for override relays on volume controls
- Switched 24V DC output for strobe operation for Alert mode
- Switched 24V DC output for strobe operation for Evac mode
- Switched 24VDC output for bell mode
- On-board timer for automatic Alert to Evac switchover, adjustable from 30secs to 7.5min in 30 second increments
- Externally operated inputs are activated by switching to ground
- Auxiliary level output
- Suitable for any amplifier with an auxiliary input
- 10 Year Warranty
- Australian Designed and Manufactured
|
|
This easy to operate building alert & evacuation controller controller is designed around industry standard building requirements. When connected to a paging system amplifier, occupants can be alerted and/or evacuated in the event of an emergency eg: fire, gas leak, bomb scare, earthquake. |
|
A6514 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
These compact modules are designed to remotely alter the volume of any low level signal source over serial control. |
|
C0361 |
|
- Insert: BackElectret - Condenser
- Polar Pattern: Line + Gradient
- Impedance: 200 Ohm balanced
- Open Circuit Sensitivity: -60dB ±3dB
- Frequency response: 30Hz - 18kHz
- Maximum SPL: 119dB (1kHz @ 1% THD)
- Dynamic Range: 89dB (1kHz at 1Pa)
- Signal to Noise: 64dB (1kHz @ 1Pa)
- Operating Voltage: Phantom power 9V - 52V DC, 2mA typical
- Output Connector: Integral 3-pin XLR Male
- Dimensions: Ø19 x 288mm
- Included Accessories: Windscreen
|
|
This shotgun mic is designed to plug directly into a desk mount XLR socket. The line + gradient pattern provides an extremely tight unidirectional pickup and high rejection of back & side signals. It features a section of flexible gooseneck for angle adju |