|
Description |
Downloads |
Specs |
Ordering |
|
|
A5135 |
|
- Connects to four paging microphones via A 5138 wallplates or other Redback UTP transmitter at each location
- Built for supermarkets, food outlets or anywhere multiple paging microphones are in use
- Easy Cat5e/6 cabling back to hub
- Adjustable VOX sensitivity
- PTT muting
- 24V DC operation
- BGM input
- Balanced & line outputs
- Australian designed & assembled.
|
|
Designed with small supermarkets in mind. We've designed the hub to cater for industry standard supermarket 5 pin XLR microphones which connects to a local wallplate (A 5138) over a Cat5/6 cable. |
|
A4930 |
|
- Connects to A 4931 transmitter wallplate or other Redback UTP transmitter (see connection matrix)
- Connect up to four audio zones together.
- Easy Cat5e/6 UTP data cabling connection.
- Up to 300m cable runs out to zones.
- Balanced Euro terminal block connections.
- Balanced mic or line level operation.
- 24V DC operation.
- Australian designed & assembled.
|
|
This Microphone/Line Hub is designed to accept audio from up to four A 4931 Mic/Line Preamp wallplates. The Hub has a dedicated output for each wall plate, with front mounted volume controls for each output. |
|
A1760 |
|
- Frequency Response
- Mic input : 50Hz - 12kHz, -3dB
- Music input: 50Hz - 15kHz, -3dB
- Input Sensitivity
- 5 pin XLR Mic input: 3mV
- 3.5mm Music input: 1V
- Output Sensitivity
- 3 pin XLR Mic output: 3mV
- Output Connectors
- Output Active closing contact: Screw terminals
- Mic output: 3 pin XLR
- PTT Activitation
- PTT via 5 Pin XLR microphone switch or PTT Screw terminals or PTT switch
- Input Connectors
- Mic Input: 5 pin XLR balanced
- Music Input: 3.5mm stereo socket
- 24V DC power: Screw terminals
- 24V DC power: 2.1mm DC Jack
- PTT Trigger: Screw terminals
- Controls
- LED Indicator: Ready, Recording, Busy, Playing, No SD Card
- Audio File Formats: mp3, .ogg or .wav
- Power Supply:24V DC 1Amp
- Current Draw:40mA @ 24V DC
- Dimensions:134mm(L) x 75mm(D) x 46mm(H)
- Weight:0.2kg
|
|
three modes of operation, determined by DIP switches, which include an Audio Delay, a Microphone Recorder and a Audio Recorder. |
|
A2347 |
|
- Power rating: 200W (40W per zone)
- Relay override operation voltage: 24V DC
- Dimensions: 484W x 50D x 88H mm
- Weight: 2.3kg
|
|
May be configured to either five single inputs to five outputs or one input to five outputs. Each zone has a 40W and 100W load capacity respectively, with a total panel capacity of 200W and 500W. Has 11 settings plus 'off'. The input and outputs are conn |
|
C8881B |
|
- Operating frequencies 520 / 524.30MHz
- 19” 1RU rack mount case
- Steel enclosure construction
- Removable aerials
- Individual 3 pin XLR outputs
- Mixed 6.35mm jack output (1m cable included)
- Front panel level controls
- Tone squelch circuit for noise reduction
- RF, AF & peak signal LEDs
- Range up to 50m in ideal conditions
|
|
For systems requiring the freedom of two independent wireless microphones at an economical price. The sturdy 19" rack mount cabinet is fitted with two fixed frequency wireless receivers. The miniaturised SMD construction and unique shielding technique, pl |
|
C8882B |
|
- Operating frequencies 520 / 524.30MHz
- 19” 1RU rack mount case
- Steel enclosure construction
- Removable aerials
- Individual 3 pin XLR outputs
- Mixed 6.35mm jack output (1m cable included)
- Front panel level controls
- Tone squelch circuit for noise reduction
- RF, AF & peak signal LEDs
- Range up to 50m in ideal conditions
|
|
For systems requiring the freedom of two independent wireless microphones at an economical price. The sturdy 19" rack mount cabinet is fitted with two fixed frequency wireless receivers. The miniaturised SMD construction and unique shielding technique, pl |
|
C8867C |
|
- 16 Channels in 520 - 550MHz UHF Band
- RF and AF signal presence LEDs
- Tone squelch circuit for noise reduction
- Range up to 70m in ideal conditions
- 6.35mm unbalanced line/mic output
- 3 pin balanced XLR mic output
- Microphone transmitters require 2 x AA batteries (not included).
|
|
The perfect entry level 16 channel UHF wireless microphone system for clubs, restaurants, function centres, wedding ceremonies etc. It produces a clear, crisp vocal reproduction, whilst allowing freedom of movement. Supplied as a complete "ready to go" system with a handheld microphone transmitter. |
|
C8868C |
|
- 16 Channels in 520 - 550MHz UHF Band
- RF and AF signal presence LEDs
- Tone squelch circuit for noise reduction
- Range up to 70m in ideal conditions
- 6.35mm unbalanced line/mic output
- 3 pin balanced XLR mic output
- Microphone transmitters require 2 x AA batteries (not included).
|
|
The perfect entry level 16 channel UHF wireless microphone system for clubs, restaurants, function centres, wedding ceremonies etc. It produces a clear, crisp vocal reproduction, whilst allowing freedom of movement. Supplied as a complete "ready to go" system with a beltpack/lavalier microphone transmitter. |
|
A1982B |
|
|
|
Megaphone fitted with an alert/evac tone generator. The required function (alert/evac/megaphone) is selected via a toggle switch and is activated by pressing the trigger. To recharge batteries (NiMH batteries only) simply plug in the included AC plugpack. It requires 15 hours to fully charge. Rechargeable batteries sold separately. |
|
A5131 |
|
- 4 balanced microphone / 3 line inputs
- 3 modes of priority Cascade, FIBD, None
- VOX or PTT muting
- VOX muting or both mic and line inputs
- Channel active indicators
- Stylish half width 1RU chassis
- 24V DC operation
- Separate volume for each input
- Adjustable VOX sensitivity for each input
- 24V DC plugpack included
- Includes Power Supply
|
|
This four channel mixer features 4 balanced mic inputs and 3 line inputs. Input 1 is a dedicated balanced mic input whilst inputs 2 - 4 can accept either balanced mic or line level. |
|
A4860 |
|
- Class-D 2 x 50W amplifier
- Bluetooth 4.2 wireless streaming
- Stereo RCA & 3.5mm jack inputs
- Optical input with high performance DAC
- Automatic signal switching with priority for Bluetooth audio source
- 240V AC operation
|
|
A compact bluetooth stereo amplifier for home and commercial sound systems. Features a high spec Class-D 2x50W RMS amplifier and optical input for connection to digital audio sources. Pairs well with the A4861 200W subwoofer amplifer. |
|
A1922 |
|
- Powered by 24V DC
- 100V line audio output
- Line level audio input
- Short circuit, overload and thermal cutout protection
- Bolt-in chassis construction
|
|
These modules are designed for use in emergency evacuation systems and are powered by an external 24V DC source. They accept a line level audio input and produce a 100V line output via a transformer. The modules feature short circuit, overload and thermal cutout protection, and are constructed on a steel chassis.
|
|
C8860B |
|
- 16 Channels in 520-550MHz UHF Band
- LCD shows selected channel
- Half rack 1RU desk mount case
- Tone squelch circuit
- Range over 100m in ideal conditions
- 6.35mm line output
- 3 pin balanced XLR mic output
|
|
Featuring Auto-Scan system allowing quick and easy selection of an interference free operating frequency. This is particularly useful when there are many existing systems in use nearby. Incorporates diversity reception ensuring a consistent and clear micr |
|
A1715 |
|
- Four MP3 audio messages available
- Micro SD Card storage of MP3 files (supplied)
- Stereo Dual RCA output
- Remote triggering of MP3 playback
- Manual playback of MP3 files
- 24V DC operation
- Supplied with 24V DC plugpack
|
|
The A 1715 is an MP3 based message player, housed in a convenient DIN rail housing. It has four independent contacts for remote triggering
of the four available MP3 audio files. |
|
A1717 |
|
- Electrical
- Output line: Stereo RCA 500mV nominal
- Power supply: 24VDC
- MP3 sample rate: 44kHz
- SD card size: 256MB to 8GB
- Trigger activation: Closing contact
- Switched output: 12-30V DC out (supply voltage dependant)
- MP3 specification
- Length/size: Limited only by card size (16GB max)
- Bit rate: All standard MP3 rates (128kbps recommended)
- Sample rate: All standard MP3 rates (44.1kHz recommended)
- Channels: Stereo or mono
- Mechanical
- Dimensions: 105W x 81D x 25H mm
- Weight: ≈0.5kg
|
|
The A 1717 is an MP3 based message player, housed in a compact flange mount aluminium enclosure and offers playback of four MP3 tracks. 4 Message |
|
A4582 |
|
- 2U 19" rack mount
- Monitors up to 10 100V line amplifiers
- Analogue VU output level display
- No power required
- Built in monitor speaker
- Speaker volume control
- Minimal circuitry for low noise
|
|
A handy aid to test and adjust 100V line PA amplifier output levels. Capable of monitoring 10 individual amplifiers (electrically isolated from each other to prevent cross talk). Audible and visual monitoring is available from the built in speaker and VU |
|
A6510 |
|
- Compatible with Redback Touch wallplates or third party serial control systems.
- RS232/485 input.
- Twelve relay outputs.
- Operation indicators on all relay outputs.
- Wallplate connection via standard UTP cabling.
- Powered by 24V DC input (passes power to wallplate – power supply sold separately)
|
|
Designed to be used in conjunction with Redback Touch programmable touchscreen wallplates, as a standalone system or as an expansion hub for the A 6505A, this control hub consists of 12 relays with isolated sets of voltage free contacts that close on operation.
|
|
A6515 |
|
- Compatible with Redback Touch wallplates or third party serial control systems.
- RS232/485 input.
- Two high current 16 Amp relay outputs.
- Operation indicators on all relay outputs.
- Wallplate connection via standard UTP cabling.
- Powered by 24V DC input (passes power to wallplate – power supply sold separately)
|
|
This relay hub consists of 2 high current (16A) relays with isolated sets of voltage free contacts that close on operation. The relay hub can be used in three ways. |
|
A6512 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
These compact modules are designed to remotely alter the volume of any low level signal source feeding any amplifier or mixer remotely, via RS 232 or RS 485 serial control. They will interface with the Redback A 6500 wallplate or any other 3rd party control system. Requires 24V DC power supply. Includes one input with remote volume adjustment via s |
|
A6514 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
These compact modules are designed to remotely alter the volume of any low level signal source over serial control. |
|
A1717A |
|
- Electrical
- Power supply: 24V DC to 30V DC 300mA (idle/maximum current draw 150mA) tip positive
- Output line: Stereo RCA 500mV nominal
- MP3 sample rate: 44kHz
- SD card size: 256MB to 16GB
- Trigger activation: Closing contact
- Switched output: 24-30VDC out (supply voltage dependent), limited to 120mA current draw
- MP3 Info
- MP3 File Format: Minimum 128kbps, 44.1kHz, 32bit, VBR or CBR, Stereo
- Length/size: Limited by card size (1600mins @ 128kbps, 44kHz on supplied 16GB)
- Bit rate: All standard MP3 rates (128kbps recommended)
- Sample rate: All standard MP3 rates (44kHz recommended)
- Channels: Stereo or mono
|
|
The A 1717A is an MP3 based message player housed in a compact flange mount aluminium enclosure and offers playback of four MP3 tracks. |
|
A6505A |
|
- Compatible with Redback Touch control wallplates or third party serial control systems.
- Two RS232/485 inputs.
- Three relay outputs.
- PIR motion detect sensor trigger input.
- Infra-red control input.
- Wallplate connection via standard UTP cabling.
- Powered by 24V DC input (passes power to wallplate – power supply sold separately)
- Australian Designed & Manufactured.
|
|
Designed to be used in conjunction with the A 6500A programmable touchscreen wallplate, this control hub enables the control of a variety of devices. Connection to the A 6500A wallplate is via Cat5/6 cable up to 50m away. Now with PIR trigger input. |
|
A2651 |
|
- All inputs top mounted for easy access
- Dual 6.35mm TRS outputs
- LED VU meters
- USB/SD card MP3 playback with transport controls
- Repeat and delay effects
- External effects send & return
- Phones/monitor output & level
- Selectable phantom power
- Gain, monitor, effect, pan, high, mid & low levels controls on all channels
- Record RCA output
- LCD readout for USB playback
|
|
This compact high performance desk mixer is ideal for live/stage sound mixing in small applications such as theatre, bands, function centres and venues. It offers added flexibility for audio playback with a USB and SD card input on the rear panel. Playba |
|
A1745 |
|
- To mount any of the Redback half rack products into a 19" wide racking system, the H 4990 bracket is required. If a single product is mounted into the H 4990, then a metal (H 4992) or plastic (H 4993) infill panel can be fitted for a neater finish.
|
|
Connects to any RCA input to provide intervalled messages and background music. The included 8GB SD card can be loaded with your choice of background music and custom messages or promotions. Message intervals can be adjusted between 30 seconds and 7.5 minutes. |
|
A4205 |
|
- Designed to meet AS60118.4-2007
- Suits small booths 2-3 square metres
- XLR mic input
- Compatible with single loop designs
- Aux input via stereo RCA
- 10 year warranty
- Australian designed & assembled
- Short circuit proof
- Compressor circuitry
|
|
This compact hearing loop amplifier is designed for use in information kiosks, ticketing booths, help desks etc. Anywhere a small loop system is required to aid the hearing impaired. Engineered to meet AS60118.4-2007. A balanced mic input and stereo line auxiliary input is provided. Compact half rack 1RU case. 24V DC operation. |