Microphones
| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
Carry Bag To Suit Microphone Floor StandsC0513 |
| Heavy duty nylon zip lock bag specially designed to protect your microphone stands from the rough treatment dished out by life on the road. Features a convenient adjustable carry strap. | ||
 |
CB Type Balanced Microphone With Bare EndsC0335 |
| Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord 2m (including switch pair). Suitable for CB''''s, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz | ||
 |
CB Type Curly 0.75m Microphone Lead With B...C0330B |
| 0.75m curly cable to suit CB fist type microphone. Bare end connection for terminating to OEM equipment or with the connector of your choice. | ||
 |
CB Type Microphone Mounting ClipC0336 |
| Microphone clip to suit the C 0333/C 0334 / C 0335 range of CB microphones. | ||
 |
CB Type Microphone With Bare EndsC0333 |
| Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord (including switch pair). Suitable for CB's, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz (C 0334), 300Hz - 6kHz (C 0335) | ||
 |
Desk Paging Microphone PTT/PTLC0375 |
|
| An elegant, stylish, slimline unobtrusive desk-mount paging microphone equipped with a 3 pin balanced XLR lead. Features switchable flat or rolloff response to eliminate low frequency pickup. May also be switched to operate as push to talk or push to lock | |
 |
Desktop Phantom Power SupplyC0357 |
|
| A compact single channel phantom power supply with 3 pin XLR female balanced input and 3 pin XLR male balanced 48V output. Includes power supply. Size: 88W x 47H x 92Dmm | |
 |
Drop-Proof 600 Ohm Handheld MicrophoneC0383 ROHS |
|
| This balanced microphone has a specially designed grill that can withstand a drop impact without losing its shape. The tough zinc diecast housing has an inbuilt 3 pin XLR male connector and on/off switch. It is supplied complete with 5m twin shielded bala | |
 |
Dual 3 Pin XLR Horizontal Microphone Wallp...C0448 |
|
| Dual 3pin XLR microphone connectors mounted horizontally on a dual face wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | |
 |
Dual 3 Pin XLR Horizontal Microphone Wallp...CB0448 |
|
| Dual 3pin XLR microphone connectors mounted horizontally on a dual face wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | |
 |
Dynamic Insert Gooseneck PTT MicrophoneC0354 |
|
| A high performance dynamic microphone with in-built PTT switch in the head for paging systems. Complete with flexible gooseneck and built in 3 pin male XLR connector, it is ideal for paging consoles and general announcing requirements in factories, warehouses, food outlets and venues. | |
 |
Dynamic Lectern MicrophoneC0373 |
|
| This microphone features outstanding speech intelligibility, feedback rejection and user sound insolation. Complete with flexible gooseneck and built in 3 pin male XLR connector, this is ideal for lecterns, custom paging consoles, church pulpits and some | |
 |
Dynamic Screw Mount Gooseneck MicrophoneC0363 |
|
| This elegant gooseneck microphone features smooth, brilliant sound with excellent ambient noise control and feedback rejection. It's screw base is suitable for mounting on equipment or permanent desk mounting . The slimline design of this mic makes it id | |
 |
Electret Shotgun MicrophoneC0361 |
|
| This shotgun mic is designed to plug directly into a desk mount XLR socket. The line + gradient pattern provides an extremely tight unidirectional pickup and high rejection of back & side signals. It features a section of flexible gooseneck for angle adju | |
 |
Gooseneck Shock Mount Microphone BaseC0484 |
| Flush mount friction fit gooseneck base. Suitable for C 0410-C 0413 goosenecks. Mounting hole size: 50.5mm. | ||
 |
Gooseneck Supermarket Paging MicrophoneC0327 |
|
| This incredibly sturdy all metal microphone is built to survive the rigours of supermarkets & fast food restaurants. | |
 |
Lapel Condenser MicrophoneC0398 |
|
| A miniature electret lapel microphone with integral clip. Supplied with a balanced lead with mini 3 pin XLR plug. Features excellent pickup characteristics, dynamic range and requires phantom power (see C 0358). Perfect for lecturers, spruikers, presente | |
 |
Large Wireless Microphone HolderC0404 ROHS |
| Designed to suit large radio mics. Uses standard 5/8" thread to enable direct fitting to most mic stands and goosenecks. Features flexible plastic to allow the accommodation of a variety of microphone sizes. | ||
 |
Lectern Dynamic Low Impedance MicrophoneC0370 |
|
| This microphone features speech tailored frequency response with excellent noise isolation and feedback rejection. Complete with flexible gooseneck and built in 3 pin male XLR connector, this is ideal for lecterns, custom paging consoles, church pulpits a | |
 |
Lecture Light Weight Microphone BeigeC8914 |
|
| A lightweight beige coloured microphone designed for presenters, entertainers etc. Designed to sit around your ear comfortably even when used for long periods. | |
 |
Lecture Light Weight Microphone HeadbandC8913B |
|
| A lightweight microphone designed for hands-free use. The high definition microphone insert provides crystal clear speech pickup. It is designed for non-vigorous activity. Fantastic for lecturers, spruikers or live demonstrations. The microphone s | |
 |
Microphone Banquet Type Desk StandC0505A |
| Telescopes both vertically and horizontally. Swivel adjustment on horizontal arm. 5/8"" thread adaptor supplied. Heavy cast base. | ||
 |
Microphone Banquet Type Desk StandC0505B |
|
| Telescopes both vertically and horizontally. Swivel adjustment on horizontal arm. 5/8" thread adaptor supplied. Heavy cast base. Compatible with both 3/8" and 5/8" thread mounts | |
 |
Microphone Desk StandC0500 |
| Diecast base, telescopic height adjustment from 220mm to 380mm. Weight 1.4kg. 5/8" mic holder threaded adaptor included. | ||
 |
Microphone Floor Stand With BoomC0515A |
| Sturdy telescopic stem with friction grip adjustment and foldup legs. Includes screw adaptor attachment (5/8") for microphone holder etc. Height adjusts from 96 to 160cm with 70cm adjustable boom. |
Designed & manufactured in Australia.