Microphones
| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
Microphone Mini Tripod StandC0491 |
| Mic stand has fold in legs and stands 86mm high when extended. With standard 5/8" thread. | ||
 |
Large Wireless Microphone HolderC0404 ROHS |
| Designed to suit large radio mics. Uses standard 5/8" thread to enable direct fitting to most mic stands and goosenecks. Features flexible plastic to allow the accommodation of a variety of microphone sizes. | ||
 |
Windsock to suit C0361C0347 |
| Used to negate breath noise and eliminate wind or breath “pop”. Suits C 0361 shotgun microphone. | ||
 |
Black desk Mount XLR Microphone SocketC0431 ROHS |
| Incorporates a 3 pin XLR socket for mounting gooseneck microphones. Screws directly to a desk or bench top making a neat and simple installation. Black. | ||
 |
330mm Natural Gooseneck Microphone ExtensionC0410 |
| Microphone gooseneck incorporating 5/8" thread male to female. Matching bench mount bases C 0420/21. 300mm Chrome. | ||
|
450mm Natural Gooseneck Microphone ExtensionC0412 |
| Microphone gooseneck incorporating 5/8" thread male to female. Matching bench mount bases C 0420/21. 450mm Chrome. | ||
 |
300mm Black Gooseneck Microphone ExtensionC0411 |
| Microphone gooseneck incorporating 5/8" thread male to female. Matching bench mount bases C 0420/21. 300mm Black. | ||
 |
Carry Bag To Suit Microphone Floor StandsC0513 |
| Heavy duty nylon zip lock bag specially designed to protect your microphone stands from the rough treatment dished out by life on the road. Features a convenient adjustable carry strap. | ||
 |
3 pin XLR Horizontal Steel Microphone Wall...C0442 |
| 3 Pin Horizontal Mount Stainless Steel Plates with 1 x XLR skt | ||
|
450mm Black Gooseneck Microphone ExtensionC0413 |
| Microphone gooseneck incorporating 5/8" thread male to female. Matching bench mount bases C 0420/21. 450mm Black. | ||
 |
3 Microphone Holder CrossbarC0400 |
| Enables 3 microphones to be mounted on a single mic stand. Simply screws on to the 5/8” thread then the mic holders screw to the crossbar. | ||
 |
3 pin XLR Horizontal Microphone WallplateC0446A |
|
| 3pin XLR microphone connector mounted horizontally on a dual face wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | |
 |
3 Pin XLR Horizontal Microphone WallplateC0444 |
|
| 3pin XLR microphone connector mounted horizontally on a dual face wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | |
 |
Black 3 pin XLR Horizontal Microphone Wall...CB0446 |
|
| 3pin XLR microphone connector mounted horizontally on a HPM wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | |
 |
5 pin XLR Horizontal Microphone WallplateC0456A |
|
| 5pin XLR microphone connector mounted horizontally on a dual face wall plate. "One-Shot" versions with screw terminal connections for quick and easy connection on site. | |
 |
Black 5 pin XLR Horizontal Microphone Wall...CB0456 |
|
| 5pin XLR microphone connector mounted horizontally on a HPM wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | |
 |
3 pin XLR Dual Horizontal Steel Microphone...C0447 |
| 3 Pin Horizontal Mount Stainless Steel Plates with 2 x XLR skts | ||
 |
Maono AU-402 Lapel Presenters Microphone 3...D0982 |
|
| The Maono AU-402 lapel/lavalier presenters microphone offers excellent audio quality for recording YouTube videos, live demonstrations, lectures or interveiws where a handheld microphone would be inconvenient. | |
 |
CB Type Microphone With Bare EndsC0333 |
| Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord (including switch pair). Suitable for CB's, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz (C 0334), 300Hz - 6kHz (C 0335) | ||
 |
Microphone Stand Tripod W/HolderC0493 |
| Robust mic stand with fold-up legs and adjustable centre stem. With standard 5/8" thread and mic holder. Height adjustable from 95mm to 150mm. | ||
 |
CB Type Curly 0.75m Microphone Lead With B...C0330B |
| 0.75m curly cable to suit CB fist type microphone. Bare end connection for terminating to OEM equipment or with the connector of your choice. | ||
 |
Gooseneck Shock Mount Microphone BaseC0484 |
| Flush mount friction fit gooseneck base. Suitable for C 0410-C 0413 goosenecks. Mounting hole size: 50.5mm. | ||
 |
Maono AU-B01 Desktop Microphone Arm StandC0506 |
|
| This Desktop Microphone Arm Stand is an ideal solution for anyone working with voice-related hobbies such as podcasting, studio work or streaming. | |
 |
Dual 3 Pin XLR Horizontal Microphone Wallp...C0448 |
|
| Dual 3pin XLR microphone connectors mounted horizontally on a dual face wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | |
 |
Dual 3 Pin XLR Horizontal Microphone Wallp...CB0448 |
|
| Dual 3pin XLR microphone connectors mounted horizontally on a dual face wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. |
Designed & manufactured in Australia.
