|
Description |
Downloads |
Specs |
Ordering |
|
|
A4520 NEW
|
|
- Custom naming for each receiver used in a system.
- UTP output connection for extending signal to system amplifiers using Redback UTP solutions receivers.
- Pairing trigger contacts for use with A4467 remote wallplate or other external switch.
- Adjustable level control.
- External pairing LED output.
- RCA line output for local connection to amplifier.
- 24V DC powered (power supply included).
- Half 19" rack box, can be rack mounted with additional accessories (see below).
- Australian designed and manufactured.
|
|
This commercial grade BT 5.0 receiver offers the ability to interface Bluetooth audio devices into public address systems. |
|
C8881B |
|
- Operating frequencies 520 / 524.30MHz
- 19” 1RU rack mount case
- Steel enclosure construction
- Removable aerials
- Individual 3 pin XLR outputs
- Mixed 6.35mm jack output (1m cable included)
- Front panel level controls
- Tone squelch circuit for noise reduction
- RF, AF & peak signal LEDs
- Range up to 50m in ideal conditions
|
|
For systems requiring the freedom of two independent wireless microphones at an economical price. The sturdy 19" rack mount cabinet is fitted with two fixed frequency wireless receivers. The miniaturised SMD construction and unique shielding technique, pl |
|
C8882B |
|
- Operating frequencies 520 / 524.30MHz
- 19” 1RU rack mount case
- Steel enclosure construction
- Removable aerials
- Individual 3 pin XLR outputs
- Mixed 6.35mm jack output (1m cable included)
- Front panel level controls
- Tone squelch circuit for noise reduction
- RF, AF & peak signal LEDs
- Range up to 50m in ideal conditions
|
|
For systems requiring the freedom of two independent wireless microphones at an economical price. The sturdy 19" rack mount cabinet is fitted with two fixed frequency wireless receivers. The miniaturised SMD construction and unique shielding technique, pl |
|
A2347 |
|
- Power rating: 200W (40W per zone)
- Relay override operation voltage: 24V DC
- Dimensions: 484W x 50D x 88H mm
- Weight: 2.3kg
|
|
May be configured to either five single inputs to five outputs or one input to five outputs. Each zone has a 40W and 100W load capacity respectively, with a total panel capacity of 200W and 500W. Has 11 settings plus 'off'. The input and outputs are conn |
|
A1760 |
|
- Frequency Response
- Mic input : 50Hz - 12kHz, -3dB
- Music input: 50Hz - 15kHz, -3dB
- Input Sensitivity
- 5 pin XLR Mic input: 3mV
- 3.5mm Music input: 1V
- Output Sensitivity
- 3 pin XLR Mic output: 3mV
- Output Connectors
- Output Active closing contact: Screw terminals
- Mic output: 3 pin XLR
- PTT Activitation
- PTT via 5 Pin XLR microphone switch or PTT Screw terminals or PTT switch
- Input Connectors
- Mic Input: 5 pin XLR balanced
- Music Input: 3.5mm stereo socket
- 24V DC power: Screw terminals
- 24V DC power: 2.1mm DC Jack
- PTT Trigger: Screw terminals
- Controls
- LED Indicator: Ready, Recording, Busy, Playing, No SD Card
- Audio File Formats: mp3, .ogg or .wav
- Power Supply:24V DC 1Amp
- Current Draw:40mA @ 24V DC
- Dimensions:134mm(L) x 75mm(D) x 46mm(H)
- Weight:0.2kg
|
|
three modes of operation, determined by DIP switches, which include an Audio Delay, a Microphone Recorder and a Audio Recorder. |
|
A4022 |
|
- Balanced microphone input
- Built in VOX muting circuit
- Stereo line inputs
- Bass and treble tone controls
- 240V AC operation
|
|
Designed to meet the requirements of small to medium sized professional public address installations, delivering an output power of 30W RMS. |
|
C0918A |
|
- 8" high efficiency woofer driver.
- Silk dome tweeter.
- Contoured profile with adjustable wall bracket.
- Recessed gold plated banana connection to speaker cabling.
- IP54 rated sealed enclosure.
- Marine grade rust free aluminium mounting brackets.
- Rust free aluminium grille.
- Industrial strength powdercoated bracket.
|
|
These high power music speakers feature exceptional sound quality for professional sound reinforcement. They offer a stylish contoured profile together with a quick mounting bracket that virtually disappears once mounted. |
|
C0917A |
|
- 8" high efficiency woofer driver.
- Silk dome tweeter.
- Contoured profile with adjustable wall bracket.
- Recessed gold plated banana connection to speaker cabling.
- IP54 rated sealed enclosure.
- Marine grade rust free aluminium mounting brackets.
- Rust free aluminium grille.
- Industrial strength powdercoated bracket.
|
|
These high power music speakers feature exceptional sound quality for professional sound reinforcement. They offer a stylish contoured profile together with a quick mounting bracket that virtually disappears once
mounted. Connection is via the recessed i |
|
A4022A NEW
|
|
- Balanced microphone input
- Built in VOX muting circuit
- Stereo line inputs
- Bass and treble tone controls
- 240V AC operation
|
|
Designed to meet the requirements of small to medium sized professional public address installations, delivering an output power of 30W RMS. |
|
A4930 |
|
- Connects to A 4931 transmitter wallplate or other Redback UTP transmitter (see connection matrix)
- Connect up to four audio zones together.
- Easy Cat5e/6 UTP data cabling connection.
- Up to 300m cable runs out to zones.
- Balanced Euro terminal block connections.
- Balanced mic or line level operation.
- 24V DC operation.
- Australian designed & assembled.
|
|
This Microphone/Line Hub is designed to accept audio from up to four A 4931 Mic/Line Preamp wallplates. The Hub has a dedicated output for each wall plate, with front mounted volume controls for each output. |
|
A5135 |
|
- Connects to four paging microphones via A 5138 wallplates or other Redback UTP transmitter at each location
- Built for supermarkets, food outlets or anywhere multiple paging microphones are in use
- Easy Cat5e/6 cabling back to hub
- Adjustable VOX sensitivity
- PTT muting
- 24V DC operation
- BGM input
- Balanced & line outputs
- Australian designed & assembled.
|
|
Designed with small supermarkets in mind. We've designed the hub to cater for industry standard supermarket 5 pin XLR microphones which connects to a local wallplate (A 5138) over a Cat5/6 cable. |
|
A4422 |
|
- To mount any of the Redback half rack products into a 19" wide racking system, the H 4990 bracket is required. If a single product is mounted into the H 4990, then a metal (H 4992) or plastic (H 4993) infill panel can be fitted for a neater finish.
|
|
The Redback® A 4422 4 channel mixer has been designed to meet the requirements of professional public address installations. It is ideally suited for use in shopping centres, gymnasiums, places of worship, court rooms etc. |
|
C2092 |
|
- Power taps: 12.5, 25, 50, 100W
- SPL 1W @1m: 106dB
- Max SPL @1m: 126dB
- Frequency response: 300Hz - 9kHz
- Dimensions (mm): ≈146Ø x 227D
- Weight: ≈2.7kg
|
|
These high power public address speakers are ideal for PA installations with very high ambient noise levels, such as in mine sites, industrial plants, large factories and workshops. The enclosure is surprisingly compact for easy mounting. |
|
C2077 ROHS
|
|
- Unique combination re-entrant horn and high frequency driver
- Tough ABS construction
- Aluminium mounting bracket
- IP65 Weatherproof Construction
- Selectable 100V line power taps 3.75, 7.5W, 15W & 30W
- High efficiency drivers and transformer
|
|
A unique innovation in horn speakers. A combination of re-entrant low/mid driver with a high frequency loaded horn culminates in breath taking clarity and sound pressure level for relatively wide range reproduction. It is eminently suited to outdoor appli |
|
A4024 NEW
|
|
- VOX muting on input 1.
- Balanced microphone inputs.
- Output muting circuit.
- Stereo line inputs & tape output.
- Bass and treble tone controls.
- Output terminals for 100V line and 8 - 16Ω loads
- Over-voltage, over current, thermal run-away and short circuit load protection.
- Muting Features: VOX Muting Via Input 1, Switch Contacts and Output Muting
|
|
A staple of the Redback range since we first started, the 30W amplifier meets the requirements of small to medium public address installations. |
|
A4433 |
|
- Connects to A4432 mixer and A4931/32 local input
- Provides input selection options for four sources.
- Local volume level control.
- Selected source level control.
- Fits standard electrical wall box.
- Easy connection to A4432 via Cat5e/6 UTP data cabling.
- Powered over ethernet.
- Australian designed & assembled
|
|
A touchscreen control wallplate to suit the A 4432 Redback mixer. Allows quick and easy source selection, muting, level control for programming, plus local input level control (when used with A 4931/ A 4932). |
|
A4495 |
|
- Remote selection of input audio source
- Volume control of zone input
- Volume control of local zone input
- Mute function
- Zone Lockout
- Personal Identification Number (PIN) Menu Lockout Function
- 2 stage wall plate functionality Lockout
- Provision for input of local microphone or line level audio via A4931 or A4931V wall plates
- Cat5e connection to A4480B
- Powered from the A4480B
|
|
The A4495 wall plate allows remote selection of the A4480B zone input audio source and volume level (1 plate required per zone). |
|
A4496 NEW
|
|
- Remote selection of input audio source
- Volume control of zone input
- Volume control of local input
- Mute function
- Zone Lockout
- Personal Identification Number (PIN) Menu Lockout Function
- 2 stage wall plate functionality Lockout
- Provision for input of local microphone or line level audio via A4931 or A4931V wall plates
- Cat5e connection to A4480B
- Powered from the A4480B
|
|
The A4496 wall plate allows remote selection of the A4480B zone input audio source and volume level (1 plate required per zone). |
|
A4414 NEW
|
|
- Balanced input and outputs
- 3 pin XLR connections
- Mic or line level operation for individual input/outputs
- Loop output for connection to multiple distributors
- Compact half rack 1RU cabinet
- 24V DC operation
- Australian designed and manufactured
|
|
This compact half rack distributor comprises of a single 3 pin balanced XLR input to four 3 pin balanced XLR outputs. Great for splitting a single audio source out to multiple zones without interference between channels. |
|
A4574A NEW
|
|
- Level controls for alert/evac, bell and voice over
- Front panel alert/evac/bell and cancel switches
- All tones MP3 based
- Alert/Evac Emergency tones can be configured for momentary or continuous operation
- 1U half rack cabinet
- Alert and Evac Tones conform to AS 1670.4 (Library included on Micro SD card)
- Compatible with fire indicator boards & break glass alarms
- Remote operation of alert , evac, bell tones & cancel.
- Local operation of alert, evac and bell
- MP3 based Alert and Evacuation Voice over message facility
- Bell chime facility
- Switched 24V DC outputs for override relays or strobes (outputs limited to 120mA)
- On-board timer for remote alert activation adjustable from 30secs to 7.5min in 30 second increments.
- Switches from alert to evac after preset time.
- Auxiliary level output
- 10 year warranty
- Australian designed and manufactured
|
|
This unit has provision for playback of Alert, Evacuation and chime tones as well as an alert and/or emergency message. When connected to a paging system amplifier, building occupants can be alerted and/or evacuated in the event of an emergency e.g.: fire, gas leak, bomb scare, earthquake. |
|
A2734 NEW
|
|
- BT 5.0 wireless audio receiver
- DAB+ digital tuner
- XLR & RCA outputs for connection to amplifier
- USB MP3 audio playback
- Anti-shock CD player
- Infra-red remote control
- 19” rack mountable housing
- 40 FM radio and 40 DAB+ presets station memories
- Direct access track controls on front panel
|
|
The Bluetooth CD / MP3 audio player is suitable for versatile PA applications (e.g. in theatres, pubs or waiting rooms) and offers special features, e.g. continuous repeat, random replay, MP3 replay of USB storage media and SD memory cards. |
|
C5210 |
|
- Rated power: 100W @ 8Ω
- Power taps: 100W
- Max SPL: 98dB
- Freq response: 55Hz - 15Khz
- Weight: 5kg
- Dimensions (mm): 260W x 320D x 340H
|
|
A high quality commercial grade passive 8" subwoofer for use with either 100V line PA amplifiers or low impedance 4 - 8 Ohm amplifiers. This sub provides additional low end response to foreground music and hi-fi applications. |
|
C8890D |
|
- 700 Channels in 520-550MHz UHF Band
- LCD screen shows channel, frequency, RF/AF signal strength
- 1RU half rack metal desk mount case
- True diversity
- Tone squelch circuit
- Range over 100m in ideal conditions
- 6.35mm line output
- 3 pin balanced XLR mic output
- Up to 12 systems can operate side-by-side on different channels.
|
|
The Redback 700 channel UHF 520-550MHz radio microphone system is a professional system incorporating true diversity reception. This ensures a consistent and clear microphone signal with minimal dropout and noise interference. |
|
A4026 NEW
|
|
- 19" rack system mountable.
- Push to talk (PTT) muting on microphone 1.
- Balanced microphone inputs.
- VOX muting circuit.
- Stereo line inputs & tape output.
- Bass and treble tone controls.
- Output terminals for 100V line and 8 - 16Ω loads
- Over-voltage, over current, thermal run-away and short circuit load protection.
|
|
A staple of the Redback range since we first started, the 30W amplifier meets the requirements of small to medium public address installations. Rack mount version of Redback A 4024. |
|
A2387 |
|
- Manual impedance matching adjustment for high acoustic quality
- 4Ω or 8Ω speaker compatible.
- Speaker power: 100W/channel (RMS).
- Removable connector can handle 12-22 AWG capacity speaker cable.
- Recessed areas on front panel for labeling the room/zones. (labels not included)
- 19" rack mounting option.
- Requires no power to operate.
|
|
Designed for multi-room sound systems. Provides six independent stereo volume controls with individual zone on/off switches. Controls enable 11 volume settings plus off position. In addition, each zone can be switched on or off from the front panel. All s |