|
Description |
Downloads |
Specs |
Ordering |
|
|
K5255 |
|
- Altronics kits are premium do-it-yourself projects designed to be assembled with ease. However, basic electronics knowledge and soldering skills are essential to construct our kits. A difficulty rating is provided to help determine if your ability is sufficient to build the kit project. Please note, once assembly has been commenced we are unable to honor any warranty claims. Please see the full details here.
|
|
Up to 12 K5250 Intercom Sub-stations can be used from this one power supply. |
|
S4736
|
|
- Nominal Capacity: 2600mAh (0.2C, 2.75V discharge)
- Minimum Capacity: 2550mAh (0.2C, 2.75V discharge)
- Charging Voltage: 4.2 ±0.05 V
- Nominal Voltage: 3.7V
- Charging Method: CC-CV (constant voltage with limited current)
- Charging Current: Standard charge: 1300mA, Rapid charge : 2600mA
- Charging Time: Standard charge : 3hours, Rapid charge : 2.5hours
- Max. Charge Current: 2600mA (ambient temperature 25°C)
- Max. Discharge Current: 5200mA (ambient temperature 25°C)
- Discharge Cut-off Voltage: 2.75V
- Cell Weight: 47.0g max
- Cell Dimension: Height: 65.00mm max, Diameter: 18.40mm max,
- Operating Temperature: Charge: 0 to 45°C, Discharge: -20 to 60°C
- Storage Temperature 1 year: -20~25°C, 3 months: -20~45°C, 1 month: -20~60°C
|
|
These high performance 18650 lithium ion 3.7V batteries offer high performance and long life from a compact package. They are 18.6mm in diameter and 65mm long. |
|
A3833 |
|
- Allows 4 AV sources to be connected - analog AV, VGA+3.5mm audio, mini DisplayPort, HDMI and USB-C.
- Converts all inputs to HDMI output 4K/2K @ 60Hz.
- Charge device via USB type A or USB type C ports.
- Ethernet by-pass function
- Source auto-detect plus manual switch selection
- Includes power supply.
|
|
Ideal for use in educational or boardroom environments, this handy converter table box provides connection for AV devices with VGA/3.5mm audio, USB-C, Mini DisplayPort and HDMI connections and outputs to a HDMI equipped projector or display. |
|
Z6311 |
|
|
|
A huge array of sensors for building into your Arduino project design. All feature standard pin headers for easy connection. The kit includes boards such as 1 channel relay, joystick, temp/humidity sensor, rotary encoder, microphones, hall effect sensor and much more! |
|
N2098 |
|
|
|
Don't be caught under or overcharging your dual battery setup with this handy LCD monitor. |
|
S9850 |
|
- 1920 x 1080 (1080p) video resolution, motion detection, loop recording and 60° angle
- Motion detect recording
- Two way communication
- Please change to SD card slot for local recording up to 64GB (supplied separately)
- Clock display: year, month, day, 12 / 24-hour selection
- USB powered - can also be powered by 2 x 18650 lithium cells (S 4739).
|
|
Looks like an alarm clock, but has an in-built 1080p camera capable of streaming directly to your iOS/Android phone via the Tuya SmartLife app. |
|
K5886 |
|
|
|
(SC October '10) Brings your Christmas light show to life! Lights will flash, dim up & down in time with your favourite Christmas carols. Power up to 32 channels of lights from a master unit & 4 slaves. |
|
A1142 |
|
- Video resolution - Up to 1080p
- HDMI and component video outputs
- Stereo analogue audio output via RCA
- MPEG-2, H.264/AVC SD/HD stream decoding
- 10/100M Base-T RJ45
- Audio MDI/MDIX IGMP multicasting programs
- Support USB 2.0 FAT32
- Easy to install and use
- Light weight & compact
- Includes remote control
|
|
Works in conjunction with the A 1140 for televisions without DLNA streaming capability (typically non-smart TVs). It receives HD content via IP and outputs to your TV via HDMI and component video connections. Compact design allows installation in any environment. Includes power supply. |
|
K1940 |
|
- Rolling code infrared transmission
- Small keyfob style case
- Dual function buttons
- Up to 16 separate transmitters can be synchronised
- Two alarm inputs with exit and entry delays
- Two door strike outputs
- Alarm output
- Arm/disarm output and LED indicator
- IR acknowledge LED
- Strike 1 operates on arm, disarm or both
- Strike 2 operates independently with momentary or toggle output
- Transmitter lockout
- Requires 12V DC supply
|
|
Ideal for keyless entry for doors in cars, homes & industry, this Keyless Entry System features a rolling code to ensure high security. It also has two door-strike outputs, an alarm system & provision to use up to 16 separate keyfob transmitters w |
|
M8882A |
|
- Rapid charging with BC1.2 technology, power output up to 2.4A
- Innovative design for space saving, put your devices on top of charging station when charging
- Adjustable separators allows you to adjust the width needed for different devices
- Protection against over-charging, over-voltage, over-heating and short circuit
- Solid and stable base, it can support up to 10 devices
- 2 charging ports with QC3.0
- QC3.0 is backward compatible with Quick Charge 2.0
|
|
This 10 port USB charger allows you to charge up to 10 mobile devices at once. Ideal for workplaces, schools and large families. Keep everything charged up and ready to go. |
|
H8220A |
|
|
|
This stylish desk mount bracket simply clamps to your desk and supports screen sizes 13-27" weighing up to 8kg. |
|
A1745 |
|
- To mount any of the Redback half rack products into a 19" wide racking system, the H 4990 bracket is required. If a single product is mounted into the H 4990, then a metal (H 4992) or plastic (H 4993) infill panel can be fitted for a neater finish.
|
|
Connects to any RCA input to provide intervalled messages and background music. The included 8GB SD card can be loaded with your choice of background music and custom messages or promotions. Message intervals can be adjusted between 30 seconds and 7.5 minutes. |
|
S4732
|
|
- Nominal Capacity: 2600mAh (0.2C, 2.75V discharge)
- Minimum Capacity: 2550mAh (0.2C, 2.75V discharge)
- Charging Voltage: 4.2 ± 0.05 V
- Nominal Voltage: 3.63V
- Charging Method: CC-CV (constant voltage with limited current)
- Charging Current: Standard charge: 1300mA, Rapid charge : 2600mA
- Charging Time: Standard charge : 3hours, Rapid charge : 2.5hours
- Max. Charge Current: 2600mA (ambient temperature 25°C)
- Max. Discharge Current: 5200mA (ambient temperature 25°C)
- Discharge Cut-off Voltage: 2.75V
- Cell Weight: 45.0g max
- Cell Dimension: Height : 65.00mm max, Diameter : 18.40mm max
- Operating Temperature: Charge : 0 to 45°C, Discharge: -20 to 60°C
- Storage Temperature: 1 month: -20~60°C, 3 months: -20~45°C, 1 year: -20~25°C
|
|
These high performance 18650 lithium ion 3.7V batteries offer high performance and long life from a compact package. They are 18.6mm in diameter and 65mm long. |
|
Q0207 |
|
- General information
- • markers: for amplitude/voltage and frequency/time
- • input coupling: DC, AC and GND
- • 8 bit resolution
- • storage of display and data
- • supply from USB port (500mA)*
- • dimensions: 100x100x35mm / 3,9x3,9x1.4"
- Spectrum analyser:
- • frequency range: 0 .. 120Hz to 12MHz
- • linear or logarithmic timescale
- • operating principle: FFT (Fast Fourier Transform) • FFT resolution: 2048 lines
- • FFT input channel: CH1 or CH2
- • zoom function
- Transient recorder
- • timescale: 20ms/Div to 2000s/Div
- • max record time: 9.4hour/screen
- • automatic storage of data
- • automatic recording for more than 1 year • max. number of samples: 100/s
- • min. number of samples: 1 sample/20s
- Function generator
- • frequency range: sine from 0.5Hz to 1MHz
- • square and triangle from 0.5Hz to 500kHz
- • extended waveform library
- • amplitude range: 200mVpp to 8Vpp @ 1KHz//
- output impedance: 50ohm
- Oscilloscope
- • bandwidth: two channels DC to 12 MHz ±3dB • input impedance: 1 Mohm / 30pF
- • maximum input voltage: 30V (AC + DC)
- • time base: 0.1μs to 500ms per division
- • input range: 10mV to 3V/division
- • readouts: True RMS, dBV, dBm, p to p, Duty
- cycle, Frequency...
- • record length: 4K samples / channel
- • sampling frequency: 250Hz to 25MHz
- • sample history and digital grab function
- Bode plotter
- • Automated sync between oscilloscope and generator
- • Frequency range: 1kHz , 10kHz, 100kHz, 1MHz
- • Frequency start: 1Hz, 10Hz, 100Hz, 1kHz, 10kHz
|
|
Pocket size PC oscilloscope and function generator. This small box contains a world of measuring tools! |
|
S9268 ROHS
|
|
- Connector Type: 1x BNC
- Cable Type: 75-ohm RG59, RG6, or RG11 video-grade coaxial cable
- Max. Transmission Distance: 600m (2000ft.) for the RG6 coaxial cable
- Ethernet Connector: 1x RJ-45 with LEDs on Connector
- Cable Type: Straight through or cross-over Cat5 Cable, Auto MDI/MDIX
- Rate: IEEE 802.3x, Auto-Detection for 10/100Base-T and full / half duplex
- Output Voltage: IEEE 802.3af/at PSE@ RJ45 Port
- LED Indicators: Coaxial Data Signal Strength, Green: GOOD (Link speed > 60Mbps) / Amber: MEDIUM (Link speed 20~60Mbps), Red: BAD (Link speed < 20Mbps) / Off: NO LINK
- Push Button: Reset / Pairing
- Input Operating Voltage: DC 56V / 0.03 - 1.6A
- Power Consumption: 1.5W (w/o power forwarding)
- Operation Temperature: -20°C ~ 60°C
- Humidity: 20% to 85% RH. (non-condensing)
- Storage Temperature: -30°C ~ 80°C
- Dimensions (W×D×H) mm: 38 x 120 x 33
- Weight: 176g
-
-
Transmission Distance with Power Delivered: COAXIAL Cable |
-
-
-
Power Delivered
- & Power Source
|
-
Not using
- PoE output
|
-
5.5W |
-
7W |
-
9W |
-
12W |
-
17W |
-
-
-
Maximum Coax RG6. Data Link Distance |
-
-
-
DC56V Power Supplied |
-
2000m |
-
600m |
-
500m |
-
400m |
-
300m |
-
200m |
-
-
-
-
Transmission Distance with Power Delivered: UTP Cable |
-
-
-
Power Delivered
- & Power Source
|
-
Not using
- PoE output
|
-
16W |
-
18W |
-
19.5W |
-
20W |
-
22W |
-
-
-
Maximum Cat.5 (4-Pair) UTP Cable. Data Link Distance |
-
-
-
DC56V Power Supplied |
-
600m |
-
600m |
-
500m |
-
400m |
-
300m |
-
200m |
-
|
|
A 10/100 ethernet over coax transceiver for sending ethernet only (no power) over
coaxial cabling. Two units are required to form a link. Alternatively, it can be used with S 9267 4 way splitter cable to four S 9268 transceivers. Requires 12V DC from either M 9273A or existing 12V supply using P 6715. Maximum coaxial length 2000m. |
|
X3099 |
|
- Up to 20m remote controlling distance with the 2.4GHz high frequency signal
- Handheld remote control watch
- Plays beats (can be turned off)
- Dance Mode
- Performs Drifts
- Cool and fast 360-degree rotation on the spot
- Drives fast and reacts rapidly
- LED lights
- Easy to learn how to control
|
|
Perform awesome stunts with this remote control drifter stunt car. You can enjoy the feature of drifting and 360° spinning. A great gift idea for birthday and Christmas presents. |
|
S9901G |
|
- Bullet Camera Specifications
- OV4689 4MP Sensor
- 4MP AHD resolution 2560x1440px
- IR Cut
- 30m IR range
- 2 Infra-Red LEDs
- 0.001 Lux
- Vandal resistant
- IP66 rated for outdoor use
- Analog BNC connection
- 2.8mm f2.0 lens
- Size: 157 x 70 x 66mm.
- DVR Specifications
- H.264 compression
- Simultaneous all channel recording
- Near real time recording 15fps per ch. @ 4MP
- Real time 25fps @ 1080p
- AHD/CVI/TVI/IP camera compatible
- 2 SATA HDD bays (12TB max).
- QR code remote viewing app set up
- USB 2.0 ports for backup
- Audio inputs
- Schedule & motion detect recording
- Alarm triggered recording with 4 alarm inputs and 1 output
- Hexaplex operation: preview, recording, playback, network live viewing, network backup & network playback
- PTZ control (when used with PTZ cameras)
- Composite, VGA & HDMI monitor output
- RJ45 ethernet connection
- Mouse & IR remote control
|
|
A total home or small business solution. - Includes cameras, digital video recorder, connection leads & power supplies. - Easily installs in just a few hours. - Ideal for home or office. - Suitable for DIY - Just add a hard drive and plug it in! Bullet Camera Specifications: - OV4689 4MP Sensor - 4MP AHD resolution 2560x1440px - IR Cut - 30m |
|
K6075 |
|
- Altronics kits are premium do-it-yourself projects designed to be assembled with ease. However, basic electronics knowledge and soldering skills are essential to construct our kits. A difficulty rating is provided to help determine if your ability is sufficient to build the kit project. Please note, once assembly has been commenced we are unable to honor any warranty claims. Please see the full details here.
|
|
Ideal for automotive fault-finding * Set for any current between 315mA and 10A. This resettable Electronic Fuse (eFuse) can be used temporarily in place of a conventional fuse when fault-finding. |
|
K5804 |
|
- LED voltage: 12-24V DC
- LED current: up to 10A total (ie, 120-240W maximum)
- Number of LED strings: up to 16 per unit
- LED control method: PWM, 200Hz, 255 brightness steps
- LED connectors: 2-pin or 4-pin male headers, 2.54mm pitch
- Audio input: 0.5-2.2V RMS nominal, 180kΩ 100pF input impedance
- Audio output: 1.1V RMS, THD+N 0.004%, signal-to-noise ratio 100dB
- Audio file support: 8-48kHz 16-bit mono or stereo WAV files
- Maximum directory depth: eight levels
- Maximum files per directory: 100
- Control method: universal infrared remote (optional)
- Dimensions: 140 x 110 x 35mm
- Supply voltage: 12-24V DC
- Current drain: ~110mA at 12V
|
|
(SC Oct/Nov '12) Accepts audio input signals and drives coloured LEDs "in tune" with the music. 16 output channels respond to different audio frequency bands and the light brightness is in proportion to the |
|
Z6451 |
|
- Assembly manual included, plus YouTube tutorials available
- Includes all motors, Arduino board, components, wiring, chassis and tracks
- Bluetooth controllable from a smartphone
- Fully customisable
- Requires 2 x 14500 batteries
|
|
This smart car kit uses the power of Arduino to provide a customisable line tracking and obstacle avoidance robot which can be modified, tweaked and upgraded. It features 4 wheels with acrylic
base. The IR and line tracking sensors keep the robot from bumping
into anything, whilst on board bluetooth allows control from your
smartphone. |
|
Z6300 |
|
- Operating voltage: 3.0V dc
- Field measurement range: -11 to +11 Gauss
- Dimensions: 25.4 x 25.4mm
- Current draw: 0.6mA
- Sampling rate: Up to 2000 samples/second
- Operating temperature: -20°C to 70°C
|
|
A high performance magnetic field sensing module designed for use in solid state navigation & compassing equipment in automotive, marine and aeronautic applications. Output can be fed directly into a microprocessor such as Arduino boards. |
|
H8967 |
|
|
|
Allows mounting of your Pi to the rear of a monitor using standard 100mm spacing VESA bolt holes. Made from laser cut acrylic plastic. Internal fan for added cooling. |
|
Z6313 |
|
- UNO R3 compatible board
- I2C1602 LCD
- Plastic packing box
- USB cable
- 3 pin sensor wires x 5
- Light sensor
- Triaxial accelerometer
- Sound Sensor
- LM35 temp sensor
- Smoke sensor
- Temp and humidity sensor
- Water level sensor
- Soil moisture sensor
- XY joystick module
- Ultrasonic sensors
- Mini Breadboard
- Acrylic plate
|
|
This kit includes an LCD readout for visualising data from a variety of included analog sensors. It is supplied with an Arduino UNO compatible board, USB cable, sensor connection leads and 10 breakout boards. The boards included ultrasonic distance detector, moisture sensor, water sensor, joystick, mic and accelerometer. |
|
P6632A |
|
|
|
Micro HDMI to HDMI Lead, 3m. 4K @ 30Hz Ultra HD Ready. |
|
A1135 |
|
- Converts HD video and audio signals to digital COFDM DVB-T channel
- AVC (MPEG-4) encoding
- 1080P output
- Programmable; channel, network names and LCN
- Full function front LCD for adjustments
- Remote access and control GUI via web browser
- Emergency announcement system control (EAS) input
- Internal fan cooling system for long life span
- 2K/8K carriers
- 1RU rack mountable
- Distributes on any new or existing RF cable
- Built-in IR control allows TV locations to have IR control of AV equipment
|
|
This high definition, HDMI equipped, modulation system allows you to distribute any HD devices (Foxtel, DVD etc) in true HD around the home or business with ease. Each AV input can be assigned its own dedicated TV channel. |