|
Description |
Downloads |
Specs |
Ordering |
|
 |
S8864A NEW
|
|
- Sturdy adjustable back stand
- 1280x800 resolution
- USB PVR recording support
- HDMI input
- AV input
- HD tuner
- Headphone output
- SD card slot
- IR Remote control
|
|
A must have for your next caravan, boating or camping trip. This portable 14 inch TV allows you to enjoy high definition entertainment on the go thanks to its in-built lithium battery. |
 |
A3145 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This series of balun components has an important difference to most HDMI balun products on the market in that it can send HDMI signals over ethernet switches, allowing HDMI sources and displays to be connected in an expandable network. It can also be used as a simple point to point extender. |
 |
A4465 NEW
|
|
|
|
This commercial grade bluetooth receiver offers the ability to interface Bluetooth audio devices into public address systems. Balanced audio is relayed back to a Redback solutions receiver (see connection matrix for compatible UTP receivers). Each receiver plate can be custom named for use in situations where multiple Bluetooth receivers are used. |
 |
A4125 |
|
- HDMI over 2-conductor cable (Such as Twisted cable, telephone cable, Cat5e/6/7 cable etc)
- With 1x Loop HDMI output at transmitter
- Transmission more than 3800m
- Support Multi-level cascading
- HDMI Resolution up to 1080p
- HDCP compliant
- IR pass-through control
- Includes power supply
|
|
This ingenious Foxtel compatible device allows you to extend your 1080p HDMI source over any 2-conductor cable including twisted cable, telephone cable or Cat5/6 etc. We recommend 12AWG - 19AWG cable. Extends a 1080p signal up to 3800m over standard gure 8 cable! |
 |
P7474 |
|
- 8K@60Hz/4K@120Hz 4:4:4 Resolution
- 48Gbps Bandwidth total
- HDR 10+/Dolby Vision Compliant
- Hybrid optical cable with fiber and copper wire
- HDCP V2.3
- Supports eARC
|
|
Suitable for use with HDMI compliant equipment and are capable of 8K resolutions at 60Hz and 4K resolutions at up to 120Hz. |
 |
A3242A |
|
- Transmit up to 70m under 4K@60Hz YUV4:4:4
- 1x HDMI loop out on transmitter
- Supports EDID management
- Supports wide band IR Pass through
- HDMI audio sampling rate up to 192KHz, max LPCM 7.1 channel
- Supports S/PDIF and PCM2.0 analog audio extraction
- Supports Dolby True HD, PCM and DTS-HD master audio
- Micro USB port to upgrade new firmware
- POC “Power Over Cable”. Only one power supply required per system
- Power from either Transmitter or Receiver end
|
|
This HDMI & One Way Infra-Red Cat6 Extender UTP Balun is designed to extend HDMI signals over distances up to 70m across economical UTP cabling. |
 |
A3242B NEW
|
|
- HDMI 2.0b and HDCP 2.2 compliant
- Supports 18Gbps video bandwidth
- Supports video resolution up to 4K/2K@60Hz RGB/YCBCR 4:4:4
- The transmission distance can be extended up to 70m via a single CAT6/6a cable
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG
- Support bi-directional IR control signal pass-through
- Audio formats: LPCM 7.1, Dolby True HD, DTS HD Master
- EDID copy pass-through function between the source device and display device
- Support ARC and audio de-embedding, audio is output through the optical fibre port of the receiver
- Support bi-directional POC (Power over Cable) function
- Compact design for easy and flexible installation
|
|
This HDMI & One Way Infra-Red Cat6 Extender UTP Balun is designed to extend HDMI signals over distances up to 70m across economical UTP cabling. |
 |
A3106 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 40Gbps video bandwidth
- Supports video resolution up to 8K@60Hz 4:2:0 10bit, 8K@30Hz 4:4:4
- 10bit, 4K@120Hz 4:4:4 10bit
- VRR, FVA, ALLM supported
- Supports HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- Supports HDMI audio formats: LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
- Built-in Equalizer, Retiming and Driver
- Advanced EDID management
- Support audio de-embedding function (output through the optical and analog port)
- Compact design for easy and flexible installation for two HDMI outputs
- HDMI daisy chain several splitters - up to 4 levels.
|
|
This splitter can distribute one HDMI source signal to any two display devices. It supports video resolution up to 8K@60Hz 4:2:0. |
 |
A1057 |
|
|
|
Distribute multiple AV signals to multiple TV screens. These multi-channel modulators and associated accessories allow the distribution of stereo audio/video signals from a variety of sources. |
 |
PA7430 |
|
- Armoured sheath for added protection
- Stainless steel and kevlar braiding
- Screw top plug housings for protecting plugs when not in use.
- 4K@60Hz 4:4:4 Resolution.
- 18Gbps Bandwidth.
- HDMI® and HDCP 2.2 compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
|
|
This 20m Active Optical HDMI male to HDMI male cable is the new solution for using optical HDMI cables in temporary AV set ups for live events & functions.
|
 |
LX2081A NEW
|
|
- Frequency Range 174~694 MHz (Channels 6 to 51)
- 44dB Maximum Gain
- 10dB Mid-Stage Gain Control
- Single RF Input
- Local or Remote Powering Options
- F-Type Connector for Power Input
- Adjustable Slope Control of 0dB to 10dB
- -30dB Test Point
- Ability to send power out via the RF Input
- High Output Figure: 118dB IMR3 (DIN45004B)
- Connectors: F-Type
- Power Consumption: 300mA
- Operating Voltage: 18V DC
- Operating Temperature: -10ºC to 50ºC
|
|
Kingrays DA44 distribution amplifier has been designed to suit the digital television environment of today and well into the future. |
 |
A1039 |
|
- Infra-red hub
- Power supply
- Infra-red target (receiver)
- Two dual eye infra-red emitters
|
|
This system incorporates a plasma friendly target, junction box and power supply. It controls four AV devices remotely via the included dual eye infra-red emitters. |
|
P7473 |
|
- 8K@60Hz/4K@120Hz 4:4:4 Resolution
- 48Gbps Bandwidth total
- HDR 10+/Dolby Vision Compliant
- Hybrid optical cable with fiber and copper wire
- HDCP V2.3
- Supports eARC
|
|
Suitable for use with HDMI compliant equipment and are capable of 8K resolutions at 60Hz and 4K resolutions at up to 120Hz. |
 |
P7436A |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m.
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
H8123 |
|
- Mounts To: Ceiling
- Screen Size: 37" to 90"
- Unit Depth: 210mm
- Max mounting dimensions: 800mm x 500mm
- Max Weight: 75kg
- Horizontal Adjustment: 130°
- Vertical Tilt Adjustment: 15°
- Distance from ceiling: 102.4cm - 122.4cm
|
|
Allows mounting of LCD screens from the ceiling, ideal for use in large areas such as waiting rooms & lobbies. Mounting height from ceiling can be varied from 102.4cm to 122.4cm. Cables can be run inside the bracket pole for a neat installation. |
 |
P7460A NEW
|
|
- Supports 8K @ 60Hz
- 32Gbps Bandwidth total
- DisplayPort 1.4 Compliant
- HDCP 2.2 Compliant
- Hybrid fibre and copper cable
- Slimline plug suits 25mm conduit
|
|
This range of Optical DisplayPort male to male leads have been constructed and designed using hybrid fibre and copper cable to ensure high-definition performance. DisplayPort Male Lead, 1.8m. |
 |
A3149 |
|
|
|
This HDMI over IP Extender uses advanced H.264 compression type which transfers signal using lower bandwidth thus transmit more smoothly. It supports 120m over single Cat5E/6 cable at point to point. |
 |
A3242 |
|
- Extends HDMI signals over distances up to 60m at 4k@ 60Hz 4:4:4 resolutions.
- HDMI 2.0, HDCP 2.2 HDCP 1.4 and DVI 1.0 compliant
- Supports 18Gbps bandwidth
- Supports one HDMI loop output
- Supports one-way IR pass-through
- Supports HDR function
|
|
Designed to extend HDMI signals over distances up to 60m across economical UTP cabling. |
 |
A4131 |
|
|
|
These HDMI balun converters allows a 1080p HDMI source to be extended to multiple remote points 50m away using economical Cat 5e or 6 UTP cabling - without sacrificing signal quality! If using 1920 x 1200 or 5.1/7.1ch the maximum distance is 40m. |
 |
PA7429 |
|
- Armoured sheath for added protection
- Stainless steel and kevlar braiding
- Screw top plug housings for protecting plugs when not in use.
- 4K@60Hz 4:4:4 Resolution.
- 18Gbps Bandwidth.
- HDMI® and HDCP 2.2 compliant.
- Supports eARC
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
|
|
This 15m Active Optical HDMI male to HDMI male cable is the new solution for using optical HDMI cables in temporary AV set ups for live events & functions.
|
 |
A1142 |
|
- Video resolution - Up to 1080p
- HDMI and component video outputs
- Stereo analogue audio output via RCA
- MPEG-2, H.264/AVC SD/HD stream decoding
- 10/100M Base-T RJ45
- Audio MDI/MDIX IGMP multicasting programs
- Support USB 2.0 FAT32
- Easy to install and use
- Light weight & compact
- Includes remote control
|
|
Works in conjunction with the A 1140 for televisions without DLNA streaming capability (typically non-smart TVs). It receives HD content via IP and outputs to your TV via HDMI and component video connections. Compact design allows installation in any environment. Includes power supply. |
|
P7472 |
|
- 8K@60Hz/4K@120Hz 4:4:4 Resolution
- 48Gbps Bandwidth total
- HDR 10+/Dolby Vision Compliant
- Hybrid optical cable with fiber and copper wire
- HDCP V2.3
- Supports eARC
|
|
Suitable for use with HDMI compliant equipment and are capable of 8K resolutions at 60Hz and 4K resolutions at up to 120Hz. |
 |
X0576 |
|
- 5/1-watt RF power
- Heavy duty die cast metal chassis
- 80 Narrowband channels*
- 38 CTCSS & 104 DCS Privacy codes
- Duplex
- Rugged construction
- Channel scan (instant/memory/priority)
- Backlit LCD display
- Rotary volume control
- Signal monitoring
- Keypad lock
- Calling tone
- Power save mode
- Removable flexible antenna
- 2.5mm jack for optional headset or speaker mic
|
|
Robust, powerful, benefit rich and priced for everyday use with quality features designed to optimise performance under all conditions. |
|
P7471 |
|
- 8K@60Hz/4K@120Hz 4:4:4 Resolution
- 48Gbps Bandwidth total
- HDR 10+/Dolby Vision Compliant
- Hybrid optical cable with fiber and copper wire
- HDCP V2.3
- Supports eARC
|
|
Suitable for use with HDMI compliant equipment and are capable of 8K resolutions at 60Hz and 4K resolutions at up to 120Hz. |
 |
A3136D NEW
|
|
- HDCP 2.2 compliant
- Supports 18Gbps bandwidth
- Supports resolution up to 4K@60Hz 4:4:4
- Supports HDR function
- Supports COPY/AUTO EDID control via dialling the DIP switch
- Compact design for easy and flexible installation
|
|
Allows the connection of multiple HDMI displays to a single HDMI source with no loss of signal quality. |
|
P7470 |
|
- 8K@60Hz/4K@120Hz 4:4:4 Resolution
- 48Gbps Bandwidth total
- HDR 10+/Dolby Vision Compliant
- Hybrid optical cable with fiber and copper wire
- HDCP V2.3
- Supports eARC
|
|
Suitable for use with HDMI compliant equipment and are capable of 8K resolutions at 60Hz and 4K resolutions at up to 120Hz. |
 |
PA7427 NEW
|
|
- Armoured sheath for added protection
- Stainless steel and kevlar braiding
- Screw top plug housings for protecting plugs when not in use.
- 4K@60Hz 4:4:4 Resolution.
- 18Gbps Bandwidth.
- HDMI® and HDCP 2.2 compliant.
- Supports eARC
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
|
|
This 10m Active Optical HDMI male to HDMI male cable is the new solution for using optical HDMI cables in temporary AV set ups for live events & functions.
|
 |
A4850 |
|
|
|
This system provides a remote Bluetooth wallplate allowing you to stream audio wirelessly from your devices in one room whilst your audio equipment/amplifier is located in another. |
 |
X0575 |
|
- 5/1 watt RF power Heavy duty
- Die cast metal chassis
- Fast charger POD supplied with 240v and 12v adaptors
- 3 Programmable instant channel buttons
- 80 Narrowband channels*
- 38 CTCSS & 104 DCS Privacy codes
- Duplex
- Rugged construction
- Channel scan (instant/memory/priority)
- Backlit LCD display
- Rotary volume control
- Signal monitoring
- Keypad lock
- Calling tone
- Power save mode
- Removable flexible antenna
- 2.5mm jack for optional headset or speaker mic
|
|
This quality unit has all the features you would expect to find in a modern UHF transceiver all housed in a rocksolid diecast chassis.
Includes charging pod, mains adaptor and high capacity 1800mAH lithium battery. |
 |
A3114 |
|
- 1 input / 4 outputs.
- HDMI 2.0b, HDCP2.2/HDCP1.4 compliant.
- Maximum HDMI resolution up to 4K2K@50/60Hz (4:4:4).
- Supports digital & analog audio extraction from HDMI source.
- Supports output bypass and 4K to 1080P downscaling.
|
|
Designed to split a single HDMI source into four HDMI outputs. |
 |
A3528A |
|
- Incorporates HDBaseT Technology
- Support resolution up to Ultra HD 4Kx2K
- Transmission distance reaches up to 70 meters under the video format of 1080P and 4K up to 40 meters
- POC( Receiver powered by Transmitter)
- Support 3D
- HDCP2.2/1.4 compliant
- CEC pass through
- Support wide-band Bi-directional IR (38KHZ to 56KHZ)
- IR extension from transmitter to receiver or from receiver to transmitter
- Phoenix RS232 Port for firmware update or RS232 control signal transmission
|
|
Cat6 balun receivers are sold individually, each includes IR receiver, IR transmitter and power supply. Size: 482W x 250D x 44Hmm. |
 |
A3225 |
|
|
|
Transceiver for use with our A3224 multi-zone HDMI extender system. This unit not only acts as a receiver for the incoming signal from the A3224 transmitter but also retransmits the signal so it can be daisy chained with up to 6 additional screens. |
 |
A4126 |
|
- Support Audio Format: LPCM audio format
- Transmission Distance: 3800m 2-Conductor cable (Recommend to use 12AWG-19AWG cable)
- Supported Video Format:
- DTV/HDTV:480i/ 480P/576i/576P/720P/1080i/1080P
- VESA: 800x600, 1024x768, 1280x768,1280x960,1280x1024, 1680x1050,1920x1080, 1280x720, 1360x768,1400x1050,1280x1024.
- Connector on Receiver:
- 1x Red Terminal Post, 1x Black Terminal Post
- 1x HDMI Output, 3.5mm
- 1x 3.5mm jack for IR-RX
- DC 5.5 x2.1mm Jack
- Power consumption: 5.5watts(Maximum)
- Dimension: 206Lx110Wx33Hmm
- IR frequency: 38K-56KHZ
- Weight: 548g
|
|
This ingenious Foxtel compatible device allows you to extend your 1080p HDMI source over any 2-conductor cable including twisted cable, telephone cable or Cat5/6 etc. We recommend 12AWG - 19AWG cable. Extends a 1080p signal up to 3800m over standard gure 8 cable! |
 |
P7434 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m (33 to 328ft).
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
P7434A |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m.
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
A1041 |
|
- Target Junction Box
- LCD Friendly Target
|
|
This suite of resi-linx® infra red (IR) products allows remote control of your AV equipment from anywhere in the house.
|
 |
X0587 NEW
|
|
- Heavy duty barrel spring base
- Fibreglass radome
- Length of antenna is 660mm
- Low-loss coaxial cable (4.5m)
- Pre-terminated FME connector and PL259 adaptor
|
|
The ANU850 is a 3dBi UHF CB Antenna with fibreglass pole and heavy duty barrel spring base. |
 |
A3081F NEW
|
|
|
|
The 4 port HDMl 4K switch lets you share a display with four HDMl™-enabled A/V devices. |
 |
PB7311 |
|
- Connector: Type A Male, Gold
- Wire gauge: 26AWG
- Wire material: Bare copper
- Out-diameter: 8.5mm
- Resolution: 4K (3840 x 2160) @ 30Hz max.
- Data rate: 18GBPS
- Colour depth: 36BIT
- Type of shielding: Triple shield
|
|
HDMI certified. Lifetime warranty. This range is supplied in a plastic bag only, Features booster amplifier for lower grade screens. |
 |
P7433A |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m.
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
X0585 NEW
|
|
- Mounting base complete with spring
- Fibreglass extension pole (full antenna height 1.6m)
- 4.5m coaxial cable, a pre-terminated FME connector and PL259 adaptor
|
|
The ANU410 is a 6dBi UHF CB Antenna with a detachable fiberglass pole. At 1.6m height and 6dbi gain, this antenna is ideal for those looking for effective communication in Australia’s relatively flat outback. |
 |
A3615 NEW
|
|
- Project screens up to 4m wide
- Compact lightweight design
- 800 x 480p output resolution
- 1080p input resolution
- Internal speaker
- 3.5mm jack audio out
- USB media playback
- HDMI input
- Screen mirroring from PC, Mac, iOS and Android devices
- Adjustable focusing
- Threaded insert in base for tripod mounting
- Power from mains power supply or battery bank (via micro USB).
|
|
This compact projector offers excellent LED picture quality with 800x480p resolution for screens up to 4m (170”) wide! |
 |
A3082 |
|
- RS-232 port for remote control.
- Video formats up to 4Kx2K@60Hz.
- Compliant with HDMI 2.0a, DVI 1.0.
- Digital and analog extracted audio output.
- HDCP 2.2 and HDCP 1.4 compliant.
- Support PCM, Dolby TrueHD, DTS-HD Master Audio up to 7.1CH.
- Switches 4 HDMI sources to a single HDMI output.
|
|
This compact 4-way HDMI switcher features manual & infra-red remote control for switching up to 4 sources to a single display supporting resolutions up to 4k 60Hz. |
 |
A3110 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
 |
A3111 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
|
P7432 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
H8232B NEW
|
|
- Application: Desk mount
- Screen Size: 17" - 32"
- Weight Capacity: 7kg
- VESA Standard: 75x75,100x100
- Pan/Tilt: -90°~+90°
- Rotate: -180°~+180°
- Cable Management: Yes
|
|
This stylish desk mount bracket simply clamps to your desk and supports screen sizes 17"-32" weighing up to 6kg. Includes 2 USB ports. |
|
P7432A |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m.
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
H8126C |
|
- Low profile design - only 55mm deep!
- +3 to 15° tilt adjustment.
- 60° swivel adjustment.
- Plastic mount covers provide a neat & tidy finish.
- Cable management guides.
- Built in levelling adjustment.
- Makes easy forward or backward viewing angle adjustments for reduced glare and eye strain.
- Sturdy and durable steel construction.
|
|
The new H 8126C is made of high-grade steel that delivers a lifetime of satisfaction. It can accommodate TVs up to 60kg in weight. In addition, it is able to tilt up and down from +3° to -15° and swivel up to 60° in either horizontal direction to find you best position while watching TV. |
 |
H8232A |
|
- Application: Desk mount
- Screen Size: 13"(330mm) - 27"(686mm)
- Weight Capacity: 6kg
- VESA Standard: 75x75,100x100
- Pan/Tilt: -90°~+90°
- Rotate: -180°~+180°
- Cable Management: Yes
|
|
This stylish desk mount bracket simply clamps to your desk and supports screen sizes 13"-27" weighing up to 6kg. Includes 2 USB ports. |
THIS PRODUCT CONTAINS A BUTTON BATTERY.
