|
Description |
Downloads |
Specs |
Ordering |
|
 |
W2235 ROHS
|
|
- Shielding Size: 16/6/0.12
- Braid Coverage: 70%
- Centre Conductor Construction: Copper Clad Steel
- Size: 1/0.584
- Outside Diameter: 6.15mm
- Conductor Area: 0.27mm2
- Loss @ 100MHz: 13.8dB/100m
- Roll Size: 100m
|
|
Ideal for home television outlets. |
 |
W2280 ROHS
|
|
- Size: 1 x 32/0.20
- Voltage Rating: 300V AC
- Current Rating: 10 Amps
- Outside Diameter: 2.55mm
- Conductor Area: 1.01mm2
- Conductor Gauge: 17AWG
- Temperature Rating: 90°C
- Roll Size: 100m
|
|
Suitable for 240V and heavy duty wiring. |
 |
W2295 ROHS
|
|
- Size: 1 x 50/0.25
- Voltage Rating: 300V AC
- Current Rating: 22 Amps
- Outside Diameter: 3.9mm
- Conductor Area: 2.45mm
- Conductor Gauge: 13AWG
- Temperature Rating: 105°C
- Roll Size: 100m
|
|
Green, 50 strand, 13AWG, heavy duty, high current, tinned copper wire with a high temperature rated PVC insulator. |
 |
W7190 |
|
- 100m pull box
- Solid copper conductors.
- PVC outer jacket with metre marking.
- 23AWG.
- AS/CA S008:2010 approved.
- ACMA approved.
|
|
U/UTP (unshielded twisted pair) network cable. Solid copper conductors 8 x 1/0.57 (≈0.20mm2 /23AWG). 7.6mm OD. |
 |
W0917A ROHS
|
|
- 2:1 shrink ratio.
- Flexible and hard wearing material.
- Provides additional environmental protection for cable joins, connectors and sheaths.
- Meets MIL-I-23053/5 class one.
- -55°C to 135°C continuous temperature rating.
- 300°C short duration temperature rating.
|
|
Nominal Ø: 20mm (31.5mm across when flattened) Ø when shrunk: 10mm
Military grade flexible tubing. Suitable for insulation, colour coding, strain relief and protection in electrical and electronic applications. |
 |
W0955A ROHS
|
|
- 2:1 shrink ratio.
- Flexible and hard wearing material.
- Provides additional environmental protection for cable joins, connectors and sheaths.
- Meets MIL-I-23053/5 class one.
- -55°C to 135°C continuous temperature rating.
- 300°C short duration temperature rating.
|
|
This heat shrink is a shrinkable plastic tube used to insulate wires, providing abrasion resistance and environmental protection for stranded and solid wire conductors, connections, joints and terminals in electrical work. |
 |
W2176 ROHS
|
|
- Size: 2 x 24/0/20
- Voltage Rating: 600V AC
- Current Rating: 7.5 Amps
- Outside Dimensions: ≈ 6 x 3.5mm
- Conductor Area: 0.75mm2
- Conductor Gauge: ≈18AWG
- Temperature Rating: 75°C
- Roll Size: 500m
|
|
Speaker cable for 100V line commercial PA audio systems. Double PVC insulated twin. Separate conductors with non-bonded sheath. |
 |
W2286 ROHS
|
|
- Size: 1 x 32/0.20
- Voltage Rating: 300V AC
- Current Rating: 10 Amps
- Outside Diameter: 2.55mm
- Conductor Area: 1.01mm2
- Conductor Gauge: 17AWG
- Temperature Rating: 90°C
- Roll Size: 100m
|
|
Yellow/Green, 32 strand, 17AWG, heavy duty, high current, tinned copper wire with a PVC insulator suitable for indoor 240V and heavy duty wiring. |
 |
W0914A ROHS
|
|
- 2:1 shrink ratio.
- Flexible and hard wearing material.
- Provides additional environmental protection for cable joins, connectors and sheaths.
- Meets MIL-I-23053/5 class one.
- -55°C to 135°C continuous temperature rating.
- 300°C short duration temperature rating.
|
|
Nominal: 6mm (9.5mm across when flattened) when shrunk: 3mm Military grade flexible tubing. Suitable for insulation, colour coding, strain relief and protection in electrical and electronic applications. |
 |
W0998A |
|
- 2:1 shrink ratio.
- Flexible and hard wearing material.
- Provides additional environmental protection for cable joins, connectors and sheaths.
- Meets MIL-I-23053/5 class one.
- -55°C to 135°C continuous temperature rating.
- 300°C short duration temperature rating.
|
|
Colour: Black
Nominal Ø: 30mm (47mm across when flattened)
Ø when shrunk: 15mm
Glue backed heatshrink is ideal for minimising cable movement and reducing moisture ingress into cable joins and plugs. |
 |
W7131 |
|
- Boxed 305m (1000ft) pull box.
- Solid copper conductors.
- PVC outer jacket with metre marking.
- 23AWG.
- AS/CA S008:2010 approved.
- ACMA approved.
|
|
U/UTP (unshielded twisted pair) network cable. Solid copper conductors 8 x 1/0.55 (≈0.20mm2 /23AWG). 6mm OD. |
 |
W2170 ROHS
|
|
- Size: 2 x 24/0/20
- Voltage Rating: 600V AC
- Current Rating: 7.5 Amps
- Outside Dimensions: Å 6 x 3.5mm
- Conductor Area: 0.75mm2
- Conductor Gauge: Å18AWG
- Temperature Rating: 75¡C
- Roll Size: 300m
|
|
Speaker cable for 100V line commercial PA audio systems. Double PVC insulated twin. Separate conductors with non-bonded sheath. |
 |
W2988 |
|
|
|
A flat copper tape ideal for running speaker cable underneath carpets. Can be folded to run around corners.
|
 |
W0715 |
|
- Nominal Ø: 10mm
- When shrunk Ø: 5mm
- Reel size: 5m
- Temperature rating: -55ºC to +125ºC
- Shrink Temperature: 70ºC to 110ºC
- Voltage rating: 600V
|
|
Nominal: 10mm, when shrunk: 5mm
Suitable for insulation, colour coding, strain relief and protection in electrical and electronic applications. |
 |
W2262 ROHS
|
|
- Size: 1 x 14/0.20
- Voltage Rating: 300V AC
- Current Rating: 4.5 Amps
- Outside Diameter: 1.8mm
- Conductor Area: 0.44mm2
- Conductor Gauge: 21AWG
- Temperature Rating: 90°C
- Roll Size: 100m
|
|
Brown, 14 strand, 21AWG, medium gauge, tinned, copper hookup wire with a PVC insulator suitable for indoor, general purpose wiring. |
 |
W3126 |
|
- Size: 4 x 65/0.14
- Voltage Rating: 300V AC
- Current Rating: 8.0 Amps
- Dimensions: 8mm Squ
- Conductor Area: 1.00mmSqu
- Temperature Rating: 70°
- Roll Size: 200m
|
|
Ideal for wiring hi-fi system speakers using a single cable run. ie. Wiring rear speakers back to amplifier. |
 |
W2255 ROHS
|
|
- Size: 1x 7/0.16
- Voltage Rating: 300V AC
- Current Rating: 1.5 Amps
- Outside Diameter: 1.32mm
- Conductor Area: 0.14mm2
- Conductor Gauge: 26AWG
- Temperature Rating: -15ºC – +90°C
- Roll Size: 100m
|
|
Green, 7 strand, 26AWG, tinned copper wire with a PVC insulator for indoor, general purpose, low current wiring. |
 |
W2158 ROHS
|
|
- Size: 2 x 24/0/20
- Voltage Rating: 600V AC
- Current Rating: 7.5 Amps
- Outside Dimensions: Å 6 x 3.5mm
- Conductor Area: 0.75mm2
- Conductor Gauge: Å18AWG
- Temperature Rating: 75¡C
- Roll Size: 100m
|
|
Speaker cable for 100V line commercial PA audio systems. Double PVC insulated twin. Separate conductors with non-bonded sheath. |
 |
W2407 |
|
- Size: 1 x 95/0.1
- Rating: 300V ac @ 10A
- Outside Diameter: ≈2.4mm
- Conductor: 0.75mm sq. (≈18AWG)
- Temperature Rating: -50 to 180°C
- Roll Size: 100m
|
|
Suitable for general purpose wiring. High temperature silicone outer - rated to 180 degrees celcius. |
 |
W2282 ROHS
|
|
- Size: 1 x 32/0.20
- Voltage Rating: 300V AC
- Current Rating: 10 Amps
- Outside Diameter: 2.55mm
- Conductor Area: 1.01mm2
- Conductor Gauge: 17AWG
- Temperature Rating: 90°C
- Roll Size: 100m
|
|
Blue, 32 strand, 17AWG, heavy duty, high current, tinned copper wire with a PVC insulator suitable for indoor 240V and heavy duty wiring. |
 |
W2626 ROHS
|
|
- Conductor
- Size: 28AWG (0.89mm2)
- Material: tinned copper
- Construction: 7/0.127mm
- Insulation
- Material: Fire resistant PVC 105ºC
- Average thickness: 0.26mm
- Minimum thickness: 0.18mm
- Diameter: 26 x 1.29±0.15mm
- Colour: grey (edge with red trace)
- Electric
- Conductor resistance: max. 237Ω/km, 20ºC
- Insulation resistance: min. 100MΩ/km, 20ºC
- Capacitance: 60pF/m (G-S-G), 42pF/m (G-S)
- Inductance: 1.45µH/m
- Impedance: 100±10Ω (G-S-G)
- Propagation delay time 5.0ns/m
- Spark test 2500V
- Dielectric strength: min. 2kV in 1 minute
- Rating voltage: max. 300V
- Rating temperature: -20ºC to 105ºC
- Standard: UL2651/CSA C22.2 No. 210.2
|
|
26 Way, 1.27mm pitch. Grey insulation. |
 |
W2640 ROHS
|
|
- Conductor
- Size: 28AWG (0.89mm2)
- Material: tinned copper
- Construction: 7/0.127mm
- Insulation
- Material: Fire resistant PVC 105ºC
- Average thickness: 0.26mm
- Minimum thickness: 0.18mm
- Diameter: 40 x 1.29±0.15mm
- Colour: grey (edge with red trace)
- Electric
- Conductor resistance: max. 237Ω/km, 20ºC
- Insulation resistance: min. 100MΩ/km, 20ºC
- Capacitance: 60pF/m (G-S-G), 42pF/m (G-S)
- Inductance: 1.45µH/m
- Impedance: 100±10Ω (G-S-G)
- Propagation delay time 5.0ns/m
- Spark test 2500V
- Dielectric strength: min. 2kV in 1 minute
- Rating voltage: max. 300V
- Rating temperature: -20ºC to 105ºC
- Standard: UL2651/CSA C22.2 No. 210.2
|
|
40 Way. Grey insulation. |
 |
W2980 ROHS
|
|
- Size: 2 x 96/0.1
- Dimensions: 2.5 x 12.5
- Conductor area: 0.75mm2
- Conductor gauge: 18AWG
- Temperature rating: 90°C
- Roll Size: 50m
|
|
Oxygen free super flat speaker cable perfect for installing under carpet or along skirting boards. Great for discrete custom installs. |
 |
W2614 ROHS
|
|
- Conductor
- Size: 28AWG (0.89mm2)
- Material: tinned copper
- Construction: 7/0.127mm
- Insulation
- Material: Fire resistant PVC 105ºC
- Average thickness: 0.26mm
- Minimum thickness: 0.18mm
- Diameter: 14 x 1.29±0.15mm
- Colour: grey (edge with red trace)
- Electric
- Conductor resistance: max. 237Ω/km, 20ºC
- Insulation resistance: min. 100MΩ/km, 20ºC
- Capacitance: 60pF/m (G-S-G), 42pF/m (G-S)
- Inductance: 1.45µH/m
- Impedance: 100±10Ω (G-S-G)
- Propagation delay time 5.0ns/m
- Spark test 2500V
- Dielectric strength: min. 2kV in 1 minute
- Rating voltage: max. 300V
- Rating temperature: -20ºC to 105ºC
- Standard: UL2651/CSA C22.2 No. 210.2
|
|
14 Way. Grey insulation. |
 |
W2163 ROHS
|
|
- Size: 2 x 24/0/20
- Voltage Rating: 600V AC
- Current Rating: 7.5 Amps
- Outside Dimensions: Å 6 x 3.5mm
- Conductor Area: 0.75mm2
- Conductor Gauge: Å18AWG
- Temperature Rating: 75°C
- Roll Size: 100m
|
|
Speaker cable for 100V line commercial PA audio systems. Double PVC insulated twin. Separate conductors with non-bonded sheath. |
