|
Description |
Downloads |
Specs |
Ordering |
|
|
A4024 NEW
|
|
- VOX muting on input 1.
- Balanced microphone inputs.
- Output muting circuit.
- Stereo line inputs & tape output.
- Bass and treble tone controls.
- Output terminals for 100V line and 8 - 16Ω loads
- Over-voltage, over current, thermal run-away and short circuit load protection.
- Muting Features: VOX Muting Via Input 1, Switch Contacts and Output Muting
|
|
A staple of the Redback range since we first started, the 30W amplifier meets the requirements of small to medium public address installations. |
|
A4026 NEW
|
|
- 19" rack system mountable.
- Push to talk (PTT) muting on microphone 1.
- Balanced microphone inputs.
- VOX muting circuit.
- Stereo line inputs & tape output.
- Bass and treble tone controls.
- Output terminals for 100V line and 8 - 16Ω loads
- Over-voltage, over current, thermal run-away and short circuit load protection.
|
|
A staple of the Redback range since we first started, the 30W amplifier meets the requirements of small to medium public address installations. Rack mount version of Redback A 4024. |
|
A4464 NEW
|
|
- Simple touchscreen control selection of zone inputs and level control.
- Changes in selections are reflected on the relevant master wall plates & main Redback units.
- Fits standard single gang electrical wall box with mounting plate included.
- All glass front bezel for a stylish finish for any room.
- Adjustable screen sleep mode.
- Connects via economical Cat5e UTP cabling.
|
|
This 4.3" touchscreen control wall plate allows for remote source selection and level control in Redback source control systems (currently compatible with A4450, A4460 and A4650 systems). |
|
PC0456B NEW
|
|
|
|
5pin XLR microphone connector mounted horizontally on a Clipsal pro wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. |
|
PC0456 NEW
|
|
|
|
5pin XLR microphone connector mounted horizontally on a Clipsal pro wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. |
|
A4960 NEW
|
|
- Ideal for networking multiple microphones in supermarkets and hardware stores
- Loop in/loop out wiring with provision for tee-offs to remote points
- Connects to Redback A4962 microphone transceiver which provides output to PA amplifier.
|
COMING SOONThis item is arriving soon. |
Designed for systems that use a large number of Redback C0325/6 mics such as supermarkets and hardware stores. This design is very unique in that it allows you to install unlimited PTT mics on a single circuit, but only allow one mic at a time to operate. |
|
A4424 NEW
|
|
- Six mic / line input channels.
- Two outputs via XLR/RCA 1V balanced.
- Level, bass and treble control on all inputs.
- Adjustable input sensitivity.
- Phantom power selection on each input.
- Route signals to each output or both outputs.
- Includes power supply
- 1RU 19” rack mount case.
- Australian designed & assembled
|
|
New to the Redback mixer stable, this model incorporates six inputs which can be routed to 1 of 2 outputs or both as the installation requires. Inputs can be configured for either RCA line level signals or 3 pin XLR balanced mic signals. |
|
A2387A NEW
|
|
- Pluggable screw terminal connections
- 300W total RMS continuous power handling
- Heavy duty transformer based impedance system protects against power loss
- Left and right channels are completely isolated for safe operation with any amplifier
- Quick connect terminals will accomodate 16AWG to 22AWG wire
- Can be connected to two different amplifiers via A/B switch
- Circuit breaker protected
|
|
The A2387A is a high-power, dual-source, autoformer based speaker selector. Dual source operation makes two different amplifiers/receivers drive selected speakers simultaneously. |
|
A4660 NEW
|
|
- Standard Features:
- Touch control paging with pre and post announcement chime options.
- Adjustable microphone automatic gain control (AGC).
- High quality electret microphone with high ambient noise control and feedback rejection.
- Adjustable backlight brightness and dimmed brightness levels with selectable timeout period.
- All glass front bezel for a stylish finish for any room.
- Connects via economical Cat5e UTP cabling.
|
|
This paging console is designed to provide general paging to zones when connected to the Redback A 4450, A 4460 or A 4650 systems. It provides a visual indication of the status of all audio sources and zones within the system at a glance, sharing a common screen with the master wallplates available for use with these systems. |
|
A4463 NEW
|
|
- Simple touchscreen control selection of zone inputs and level control.
- Changes in selections are reflected on the relevant zone wall plates & main Redback units.
- Adjust custom labelling of zones and inputs on screen.
- Choose button colour theme.
- Fits standard double gang electrical wall box with mounting plate included.
- All glass front bezel for a stylish finish for any room.
- Adjustable screen sleep mode.
- Connects via economical Cat5e UTP cabling.
|
|
These 7" touchscreen control wall plates allow for remote source selection and level control in Redback source control systems (currently compatible with A4450, A4460 and A4650 systems). |
|
A4661 NEW
|
|
- Standard Features:
- Touch control paging with pre and post announcement chime options.
- Adjustable microphone automatic gain control (AGC).
- High quality electret microphone with high ambient noise control and feedback rejection.
- Adjustable backlight brightness and dimmed brightness levels with selectable timeout period.
- All glass front bezel for a stylish finish for any room.
- Connects via economical Cat5e UTP cabling.
|
|
This paging console is designed to provide general paging to zones when connected to the Redback A 4450, A 4460 or A 4650 systems. It provides a visual indication of the status of all audio sources and zones within the system at a glance, sharing a common screen with the master wallplates available for use with these systems. |
|
A4420C NEW
|
|
- 6 microphone and 2 line inputs
- All mic inputs are 3 pin XLR balanced
- Line inputs via twin RCA sockets
- Separate bass and treble tone controls
- Individual input and master volume controls
- Optional VOX muting of line inputs
- Optional phantom power for each mic input
- Microphone bass cut internally selectable
- Mic inputs routed via tone controls or bypassed
- 24VDC input
|
|
This 8 channel mixer incorporates a variety of practical features ensuring suitability for a wide scope of PA and sound reinforcement applications. |
|
A4574A NEW
|
|
- Level controls for alert/evac, bell and voice over
- Front panel alert/evac/bell and cancel switches
- All tones MP3 based
- Alert/Evac Emergency tones can be configured for momentary or continuous operation
- 1U half rack cabinet
- Alert and Evac Tones conform to AS 1670.4 (Library included on Micro SD card)
- Compatible with fire indicator boards & break glass alarms
- Remote operation of alert , evac, bell tones & cancel.
- Local operation of alert, evac and bell
- MP3 based Alert and Evacuation Voice over message facility
- Bell chime facility
- Switched 24V DC outputs for override relays or strobes (outputs limited to 120mA)
- On-board timer for remote alert activation adjustable from 30secs to 7.5min in 30 second increments.
- Switches from alert to evac after preset time.
- Auxiliary level output
- 10 year warranty
- Australian designed and manufactured
|
|
This unit has provision for playback of Alert, Evacuation and chime tones as well as an alert and/or emergency message. When connected to a paging system amplifier, building occupants can be alerted and/or evacuated in the event of an emergency e.g.: fire, gas leak, bomb scare, earthquake. |
|
A2260B NEW
|
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
|
A2260SS NEW
|
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
A stainless steel version of our popular Redback 10W volume attenuator. Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
|
A2270 NEW
|
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Designed to control 100V line speaker systems these attenuators have been enclosed in a ABS Flange Mount Enclosure. |
|
A2272 NEW
|
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Designed to control 100V line speaker systems these attenuators have been enclosed in a ABS Flange Mount Enclosure. |
|
A2515 NEW
|
|
- Frequency response: 20 Hz - 20kHz +/- 3dB
- Input level: 0.775Vrms
- Output level: 1.97Vrms (measured at 1kHz with volume control set to max).
- Maximum output level before distortion: +24dBm
- Note the RCA output sockets are in parallel
|
|
Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control (or optional screw terminal connections). |
|
A4515 NEW
|
|
- Custom naming for each receiver used in a system.
- UTP output connection for extending signal to system amplifiers using Redback UTP solutions receivers.
- Pairing trigger contacts for use with A4467 remote wallplate or other external switch.
- Adjustable level control.
- External pairing LED output.
- RCA line output for local connection to amplifier.
- 24V DC powered (power supply included).
- Australian designed and manufactured.
|
COMING SOONThis item is arriving soon. |
This commercial grade bluetooth 5.0 receiver offers the ability to interface Bluetooth audio devices into public address systems. Audio output is via standard stereo RCA sockets or balanced audio over UTP RJ45 cabling for connection to compatible Redback products. |
|
A4520 NEW
|
|
- Custom naming for each receiver used in a system.
- UTP output connection for extending signal to system amplifiers using Redback UTP solutions receivers.
- Pairing trigger contacts for use with A4467 remote wallplate or other external switch.
- Adjustable level control.
- External pairing LED output.
- RCA line output for local connection to amplifier.
- 24V DC powered (power supply included).
- Half 19" rack box, can be rack mounted with additional accessories (see below).
- Australian designed and manufactured.
|
COMING SOONThis item is arriving soon. |
This commercial grade bluetooth 5.0 receiver offers the ability to interface Bluetooth audio devices into public address systems. Audio output is via standard stereo RCA sockets or balanced audio over UTP RJ45 cabling for connection to compatible Redback products. |
|
A4465 NEW
|
|
|
COMING SOONThis item is arriving soon. |
This commercial grade bluetooth receiver offers the ability to interface Bluetooth audio devices into public address systems. Balanced audio is relayed back to a Redback solutions receiver (see connection matrix for compatible UTP receivers). Each receiver plate can be custom named for use in situations where multiple Bluetooth receivers are used. |
|
A2734 NEW
|
|
- BT 5.0 wireless audio receiver
- DAB+ digital tuner
- XLR & RCA outputs for connection to amplifier
- USB MP3 audio playback
- Anti-shock CD player
- Infra-red remote control
- 19” rack mountable housing
- 40 FM radio and 40 DAB+ presets station memories
- Direct access track controls on front panel
|
|
The Bluetooth CD / MP3 audio player is suitable for versatile PA applications (e.g. in theatres, pubs or waiting rooms) and offers special features, e.g. continuous repeat, random replay, MP3 replay of USB storage media and SD memory cards. |
|
A4260B NEW
|
|
- Mixer amplifier with in-built SD/USB/FM tuner/Bluetooth music source
- 85% efficient class-D power performance
- Low power consumption & heat generation
- Compact 1RU case
- Bass & treble control
- Front panel mic input
- Protection circuitry
- LED indicators for signal, peak, protection and power
- Selectable 100V line/4-16Ω output
- Mic/Line/Phantom Power options on Mic 1-4
- 24V DC battery backup power input
- Emergency priority input (Mic 1)
- Adjustable VOX muting
|
|
This compact Class-D design amplifier offers multi source mixing plus USB/SD card/FM tuner audio playback and Bluetooth streaming functionality. |
|
A4262B NEW
|
|
- Mixer amplifier with in-built SD/USB/FM tuner/Bluetooth music source
- 85% efficient class-D power performance
- Low power consumption & heat generation
- Compact 1RU case
- Bass & treble control
- Front panel mic input
- Protection circuitry
- LED indicators for signal, peak, protection and power
- Selectable 100V line/4-16Ω output
- Mic/Line/Phantom Power options on Mic 1-4
- 24V DC battery backup power input
- Emergency priority input (Mic 1)
- Adjustable VOX muting
|
|
These compact Class-D design amplifiers offer multi source mixing plus USB/SD card/FM tuner audio playback and Bluetooth streaming functionality. |
|
Q2007 NEW
|
|
- Suitable for 50V, 70V and 100V line speaker systems up to 5kW
- Also suitable for measuring low Impedance speaker loads of 4 -16Ω
- OLED display shows Impedance and Wattage of the load
- 1Ω to 20KΩ test range
- Auto ranging
- Display accuracy +/-10%
- Push button operation
- System Check Mode (20, 60 or unlimited minutes)
- 5V Rechargeable Lithium Polymer internal battery
- Low battery indication
- Buzzer and Haptic feedback option via Menu access
- USB Charging lead supplied
- Silicon Test Leads supplied
- Soft Carry Case Included
- Rugged yet easy to hold compact hand held case
|
|
An absolute necessity for all PA system installers. This impedance meter for ‘dummies’ designed and manufactured by Altronics calculates and displays speaker loads in watts. Lithium rechargeable version. |