|
Description |
Downloads |
Specs |
Ordering |
|
 |
A4024 NEW
|
|
- VOX muting on input 1.
- Balanced microphone inputs.
- Output muting circuit.
- Stereo line inputs & tape output.
- Bass and treble tone controls.
- Output terminals for 100V line and 8 - 16Ω loads
- Over-voltage, over current, thermal run-away and short circuit load protection.
- Muting Features: VOX Muting Via Input 1, Switch Contacts and Output Muting
|
|
A staple of the Redback range since we first started, the 30W amplifier meets the requirements of small to medium public address installations. |
 |
S2692A NEW
|
|
- Continuous Rating: 275A at 12VDC (200A at max 50VDC)
- Cranking Rating: 1250Amps at 12VDC (1000A at max 50VDC)
- Terminal Size: M10
- Electrical Life: >10000 cycles
- Dimensions: 68 x 68 x 75 mm
|
|
Rotary on/off master switch for high current DC circuits and battery banks. |
 |
D0520 NEW
|
|
- High 65W output for high capacity devices such as laptops
- 20,000mAh capacity
- 74Wh capacity - OK for air travel
- USB type A and type C outputs on front panel
- Study aluminium casing.
|
|
This 20,000mAh battery bank offers high output Power Delivery (PD) allowing users the ablity to charge a range of devices. It features an aluminium casing with power capacity LCD readout. Dual USB type A outputs as well as dual USB C PD outputs. |
 |
S2695A NEW
|
|
- Continuous Rating: 275A at 12VDC (200A at max 50VDC)
- Cranking Rating: 1250Amps at 12VDC (1000A at max 50VDC)
- Terminal Size: M10
- Electrical Life: >10000 cycles
- Dimensions: 68 x 68 x 75 mm
|
|
Four way rotary battery bank selector. Switch selections are, bank 1, bank 2, bank 1 & 2, OFF. |
 |
K8612 NEW
|
|
- 300°C high temp nozzle.
- 300 x 300 x 400mm build volume.
- HD monitor camera in-built.
- Wi-Fi, Bluetooth and Ethernet connectivity.
- Trapezoidal design for added stability on large volume prints.
- Wide compatability with a variety of filament including PLA, ABS, PVA, TPU, PA, PETG and wood.
- Full-metal dual gear direct extruder.
- CR Touch 16 point automatic levelling sensor or manual levelling as desired.
- LED light bar.
- Spring steel flexible magnetic build plate.
- Silent main board - no noisy stepper motors!
- Filament sensor.
- Pause/resume printing.
- Creality Cloud Printing with iOS/Android app support.
- Supplied mostly assembled to get you printing faster (assembles in under 30 mins).
|
|
The 7 module design of this high performance 3D printer enables assembly within 10 minutes. |
 |
S9344P NEW
|
|
- Support AHD/CVI/TVI/IP/Analog Camera Input
- Up to HD 5MP and IP 8MP Resolution Recording
- Support HD Output, VGA and CVBS Video Output
- Support Max. 4CH HD or 16CH IP Camera Input
- Support 1 SATA up to 6TB Capacity
|
|
This 4 channel digital video recorder is designed to support connection analog AHD, TVI and IP cameras (PoE router may be required for IP usage). |
 |
D0521 NEW
|
|
- High 100W output for high capacity devices such as laptops
- 30,000mAh capacity
- 111Wh capacity - NOT SUITABLE FOR AIR TRAVEL.
- USB type A and type C outputs on front panel
- Study aluminium casing.
- Torch with 3 modes on back panel
|
|
This 30,000mAh battery bank offers high output Power Delivery (PD) allowing users the ablity to charge a range of devices. It features an aluminium casing with power capacity LCD readout. Dual USB type A outputs as well as dual USB C PD outputs. |
 |
D2208A NEW
|
|
- Qi Wireless Charging
- Motorised to fit your phone automatically
- Comes with a USB Type C lead
- Safely use navigation apps in the car
- Air vent spring mount
- Suction cup mount
|
|
This 15 Watt Qi Wireless Charging Universal Phone Car Mount will not only charge your phone with its wireless fast charge feature but it will also allow you to safely use navigation apps in the car. |
 |
Q2118 NEW
|
|
- Large easy to read LCD display with backlighting.
- Tests battery CCA, voltage, internal resistance, battery health and charge status.
- Provides "Good Battery", "Good Recharge", "Charge Retest", "Replace", "Bad Cell Replace" condition statuses.
- Supports all battery standards, JIS, DIN, IEC, EN, SAW, CA, CCA, GB, BCI, MCA.
- Short circuit and reverse polarity protection.
- Test history display.
- Tests batteries in-situ in vehicle or out of vehicle.
- Quick test function via AH input.
|
|
Detects and analyses battery voltage, cold cranking amperes (CCA), resistance (mΩ) and battery cell condition. |
 |
S2694 NEW
|
|
- Pre-wired for simple installation
- Includes 100A battery isolator switch
- SB50 Anderson Style input and output
- Dual car accessory sockets
- 60W USB C PD charger
- 4 x 2.4A USB A charging ports
- Weather resistant caps on all connections
- Internal fuse block
|
|
Designed to manage power distribution in your 12V or 24V vehicle. Measuring just 160x160x80mm, this box is packed with connections. |
 |
M8534B NEW
|
|
- Short circuit and reverse polarity protected
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 6A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
 |
T2488A NEW
|
|
- We recommend the use of high quality Iroda butane gas for use in all Iroda gas powered products. Inferior or lower grade butane may contain a higher level of impurities which will block the internal microscopic filters faster causing intermittent or complete failure.
|
|
A handy fliptop keyring blowtorch, ideal for those quick jobs on the go! Easy one hand operation with adjustable 1300 degree C flame, one click piezo ignition and easily refillable with butane gas. |
 |
S9721A NEW
|
|
- USB to RS485 communication
- Adopt original FT232RL and SP485EEN, fast communicating, stable and reliable, better compatibility
- Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightning-proof & anti-electrostatic
- Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance
- 3 LEDs for indicating the power and transceiver status
|
|
The USB TO RS485 is very easy to use, allows automatic transceiving. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for industrial control equipments and/or applications with high communication requirement. |
 |
Z6433 NEW
|
|
- XTensa dual-core 32-bit LX7 CPU, frequency up to 240MHz
- 2.4 GHz Wi-Fi, EEE 802.11 b/g/n-compliant
- Bluetooth, LE: Bluetooth 5, Bluetooth mesh
- 8 MByte(64Mbit) SPI Flash
- 384 KByte ROM
- 512 KByte SRAM
- 8 MByte(64Mbit) SPI PSRAM
- 16 KB SRAM in RTC
- Communication Interfaces: 2 x I2C, 2 x I2S, 4 x SPI, 3 x UART, 1 x USB OTG
- Security: 4096 bit OTP, AES, SHA, RSA, ECC and RNG, Secure boot, Flash encryption, Digital signature, HMAC module
- Dual Type-C USB connectors
- Reset and User/Firmware buttons
- RGB WS2812 User LED
- Power LED
- Virtual USB port provided by CP2102 for debugging and firmware upgrade
- Compact size of 50.1 x 13mm
- Supply Voltage: 5V via USB
- Circuit Voltage: 3.0 to 3.6V Circuit Operation
|
|
The ESP32-S3 development board is assembled with an original ESP32-S3-WROOM-1 module from Espressif, with 16MB Flash and 8MB PSRAM(ESP32-S3-WROOM-1-N16R8). It is a general-purpose Wi-Fi + Bluetooth® LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. |
 |
A4420C NEW
|
|
- 6 microphone and 2 line inputs
- All mic inputs are 3 pin XLR balanced
- Line inputs via twin RCA sockets
- Separate bass and treble tone controls
- Individual input and master volume controls
- Optional VOX muting of line inputs
- Optional phantom power for each mic input
- Microphone bass cut internally selectable
- Mic inputs routed via tone controls or bypassed
- 24VDC input
|
|
This 8 channel mixer incorporates a variety of practical features ensuring suitability for a wide scope of PA and sound reinforcement applications. |
 |
X0604C NEW
|
|
- FM transmitter
- Easily portable
- Dual USB car charger
- USB Port for playing music
- Car battery voltage monitor
|
|
Make hands-free calls and play music directly through your car speakers via FM radio. |
 |
A3605 NEW
|
|
- Supports 4K @ 60Hz.
- As low as 100ms latency.
- Supports 20-60KHz IR remote extension.
- Supports USB KVM function.
- Up to 150m transmission line of sight.
- Auto channel selection.
- Equipped with 802.11ac 2T2R WiFi MIMO module.
- High-security protection.
- Supports one transmitter to multiple receivers.
- Supports HDCP2.2
|
|
This 4K wireless HDMI extender system supports 4K 60Hz resolutions with super smooth playback and low latency. You can now watch TV in your bedroom, study or any other room without messy cables. |
 |
A1117 NEW
|
|
- Compact Class D stereo 2 x 15W (into 4Ω)
- Bluetooth 5.1 connectivity
- Upgrade your favourite speakers to Bluetooth wireless
- Includes mains power supply
- Excellent range and audio clarity
- Suitable for in-ceiling mounting
- Assignable bluetooth device name and password
|
|
This Bluetooth mini amplifier is a great way to add wireless connectivity to a new or existing pair of ceiling or wall speakers that aren't Bluetooth equipped. It offers Bluetooth 5.1 connectivity for excellent device range and audio performance, coupled with an efficient Class-D amplifier. |
 |
K9641 NEW
|
|
|
|
An assortment of straight pin boxed PCB connectors and matching plugs in 2, 3, 4 and 5 way varieties (10 of each plug and socket). Plus crimp pins to suit plug housings. 150pcs total. |
 |
P8064 NEW
|
|
|
|
A handy gland cable entry point for caravans, campers and vehicles with roof mounted solar panels. Can be surface mounted using silastic or similar weatherproof adhesive. PG13.5 cable gland with 7.5mm cable entry (prior to tightening). Size: 60W x 112D x 35Hmm. |
 |
K8615 NEW
|
|
- 7.9" 4K mono LCD
- Self-developed integral light source
- High performance mainboard
- Z-axis with dual linear rails
- 5" HD touch screen
- Air filtration system
- Multiple slicing software
- Supports Creality Cloud APP
- Supports OTA updates
- Compatible with HALOT-BOX Lychee and CHITUBOX
|
|
The large 7.9" 4k mono LCD screen with a resolution of 4320*2560, vividly prints out every detail. With an upgraded 172 x 102 x 160mm build volume, it has a 73% volume increase compared to the 6" LCD and supports both smaller or larger models. |
 |
M8066 NEW
|
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Multi-function LCD readout
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
M8971A NEW
|
|
- MEPS efficiency level: V
- Australian standards compliant
- Suitable for a range of electronic devices
|
|
Super compact regulated power supply. 100V - 240V ac input. Energy authority approved and MEPS approved. Supplied with a fixed 2.1mm dc jack. |
 |
N0080G NEW
|
|
- Excellent performance under low light conditions, creating better kWh/kW ratio and produces an average of 2-3% more electricity.
- Anti reflective and self cleaning glass surface reduces power loss due to dirt and dust.
- Junction box and bypass diodes make sure the modules do not overheat or create a "hot spot" effect.
|
|
This quality 80W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. |
 |
S4737A NEW
|
|
- Nominal Capacity: 3500mAh (0.2C, 2.75V discharge)
- Minimum Capacity: 3350mAh(0.2C, 2.75V discharge)
- Charging Voltage: 4.2 ±0.05 V
- Nominal Voltage: 3.7V
- Charging Method: CC-CV (constant voltage with limited current)
- Charging Current: Standard charge: 1700mA
- Charging Time: Standard charge : 4hours
- Max. Charge Current: 2000mA (ambient temperature 25°C)
- Max. Discharge Current: 8A (continuous discharge)
- Discharge Cut-off Voltage: 2.65V
- Cell Weight: 50.0g max
- Cell Dimension: Height: 65.25mm max, Diameter: 18.55mm max,
- Operating Temperature: Charge: 0 to 45°C, Discharge: -10 to 60°C
- Storage Temperature 1 year: -20~25°C, 3 months: -20~45°C, 1 month: -20~60°C
|
|
These high performance 18650 lithium ion 3.7V batteries offer high performance and long life from a compact package. They are 18.6mm in diameter and 65mm long. |
