|
Description |
Downloads |
Specs |
Ordering |
|
![A4937 3 Input XLR Mic/Line Pre-Amp Bluetooth Wallplate](https://images.altronics.com.au/thb/a/A4937.jpg) |
A4937 NEW
|
|
- Standard dual gang wallplate
- Connects via RJ45 UTP cabling
- Mixed audio output
- Bluetooth audio streaming receiver in-built
- Connects to A 4942 balanced UTP receiver or other Redback UTP compatible products.
- Individual & master level controls
- Stereo RCA input
- 24V DC input via Cat5 UTP cable from connected equipment
- 3 pin XLR mic/line level inputs
|
|
These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single UTP receiver for connection to a zone amplifier. This model also features bluetooth audio streaming for local zone playback of music. |
![A4463 7](https://images.altronics.com.au/thb/a/A4463.jpg) |
A4463 NEW
|
|
- Simple touchscreen control selection of zone inputs and level control.
- Changes in selections are reflected on the relevant zone wall plates & main Redback units.
- Adjust custom labelling of zones and inputs on screen.
- Choose button colour theme.
- Fits standard double gang electrical wall box with mounting plate included.
- All glass front bezel for a stylish finish for any room.
- Adjustable screen sleep mode.
- Connects via economical Cat5e UTP cabling.
|
|
These 7" touchscreen control wall plates allow for remote source selection and level control in Redback source control systems (currently compatible with A4450, A4460 and A4650 systems). |
![A4464 4.3](https://images.altronics.com.au/thb/a/A4464.jpg) |
A4464 NEW
|
|
- Simple touchscreen control selection of zone inputs and level control.
- Changes in selections are reflected on the relevant master wall plates & main Redback units.
- Fits standard single gang electrical wall box with mounting plate included.
- All glass front bezel for a stylish finish for any room.
- Adjustable screen sleep mode.
- Connects via economical Cat5e UTP cabling.
|
|
This 4.3" touchscreen control wall plate allows for remote source selection and level control in Redback source control systems (currently compatible with A4450, A4460 and A4650 systems). |
![A4420C 8 Channel Public Address (PA) Mixer](https://images.altronics.com.au/thb/a/A4420C.jpg) |
A4420C NEW
|
|
- 6 microphone and 2 line inputs
- All mic inputs are 3 pin XLR balanced
- Line inputs via twin RCA sockets
- Separate bass and treble tone controls
- Individual input and master volume controls
- Optional VOX muting of line inputs
- Optional phantom power for each mic input
- Microphone bass cut internally selectable
- Mic inputs routed via tone controls or bypassed
- 24VDC input
|
|
This 8 channel mixer incorporates a variety of practical features ensuring suitability for a wide scope of PA and sound reinforcement applications. |
![Q2022A Audio/Video Cable Tester 13 Way](https://images.altronics.com.au/thb/q/Q2022A.jpg) |
Q2022A NEW
|
|
- All metal construction
- Portable design runs off 9V battery (sold separately)
- Easy to use cable integrity checker for PA and AV installers
- New model supports Powercon and 3.5mm jacks
|
|
Compatible with 3.5mm jack, 6.35mm jack, 3/5/7/8 pin DIN, RCA, 3/5 pin XLR, 4P Speakon, Powercon, banana plugs, RJ45 and USB. A quick and easy way to confirm lead integrity. |
![A4024 30W 3 Input 100V Public Address (PA) Amplifier](https://images.altronics.com.au/thb/a/A4024.jpg) |
A4024 NEW
|
|
- VOX muting on input 1.
- Balanced microphone inputs.
- Output muting circuit.
- Stereo line inputs & tape output.
- Bass and treble tone controls.
- Output terminals for 100V line and 8 - 16Ω loads
- Over-voltage, over current, thermal run-away and short circuit load protection.
- Muting Features: VOX Muting Via Input 1, Switch Contacts and Output Muting
|
|
A staple of the Redback range since we first started, the 30W amplifier meets the requirements of small to medium public address installations. |
![A6530 Programmable Universal 7](https://images.altronics.com.au/thb/a/A6530.jpg) |
A6530 NEW
|
|
- User programmable buttons & icons
- Multiple screen pages (12 max)
- Tandem operation
- Event splash screens
- Icon library for commonly used buttons
- Infra-red control output
- RS-232 or RS-485 serial outputs
- PIR motion trigger
- Haptic & audible button feedback options
- U/UTP Cat5 cable connection
- Multi-command macros
- IR learning facility
- SD card configuration upload
- Easy to program
|
|
This universal 7" touchscreen wallplate is the perfect control system for commercial and domestic automation. Its stylish low profile design lends itself to installation in new modern homes, classrooms, lecture theatres or corporate boardrooms. |
![A6541 Programmable Universal 4.3](https://images.altronics.com.au/thb/a/A6541.jpg) |
A6541 NEW
|
|
- User programmable buttons & icons
- Multiple screen pages (12 max)
- Tandem operation
- Event splash screens
- Icon library for commonly used buttons
- Infra-red control output
- RS-232 or RS-485 serial outputs
- PIR motion trigger
- Haptic & audible button feedback options
- U/UTP Cat5 cable connection
- Multi-command macros
- IR learning facility
- SD card configuration upload
- Easy to program
|
|
This universal touchscreen wallplate is the perfect control system for commercial and domestic automation. Its stylish low profile design lends itself to installation in new modern homes, classrooms, lecture theatres or corporate boardrooms. |
![P7462A 20m Optical DisplayPort Male to Male Lead](https://images.altronics.com.au/thb/p/P7462A.jpg) |
P7462A NEW
|
|
- Supports 8K @ 60Hz
- 32Gbps Bandwidth total
- DisplayPort 1.4 Compliant
- HDCP 2.2 Compliant
- Hybrid fibre and copper cable
- Slimline plug suits 25mm conduit
|
|
This range of Optical DisplayPort male to male leads have been constructed and designed using hybrid fibre and copper cable to ensure high-definition performance. |
![P7460A 10m Optical DisplayPort Male to Male Lead](https://images.altronics.com.au/thb/p/P7460A.jpg) |
P7460A NEW
|
|
- Supports 8K @ 60Hz
- 32Gbps Bandwidth total
- DisplayPort 1.4 Compliant
- HDCP 2.2 Compliant
- Hybrid fibre and copper cable
- Slimline plug suits 25mm conduit
|
|
This range of Optical DisplayPort male to male leads have been constructed and designed using hybrid fibre and copper cable to ensure high-definition performance. DisplayPort Male Lead, 1.8m. |
![T2488A Micro-Jet AT-2057 Mini Butane Gas Blow Torch](https://images.altronics.com.au/thb/t/T2488A.jpg) |
T2488A NEW
|
|
- We recommend the use of high quality Iroda butane gas for use in all Iroda gas powered products. Inferior or lower grade butane may contain a higher level of impurities which will block the internal microscopic filters faster causing intermittent or complete failure.
|
|
A handy fliptop keyring blowtorch, ideal for those quick jobs on the go! Easy one hand operation with adjustable 1300 degree C flame, one click piezo ignition and easily refillable with butane gas. |
![M8971A 24V DC 3A Fixed 2.1mm Tip Appliance Powerpack](https://images.altronics.com.au/thb/m/M8971.jpg) |
M8971A NEW
|
|
- MEPS efficiency level: V
- Australian standards compliant
- Suitable for a range of electronic devices
|
|
Super compact regulated power supply. 100V - 240V ac input. Energy authority approved and MEPS approved. Supplied with a fixed 2.1mm dc jack. |
![F1163 120mm 24VDC Ball Bearing Cooling Fan](https://images.altronics.com.au/thb/f/F1163.jpg) |
F1163 NEW
|
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles, brushless DC motor
- Bearing System: Precision ball bearing system
- Frame/Fan Blade Material: Thermoplastic PBT of UL 94V-0
- Rotation: Counter-clockwise (viewed from the front of the blade)
- Mounting Holes: 8 x 4.3mmØ
- Dimensions: 120 x 120 x 25mm
- Weight: 157g
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 207mA
- Rated Power Consumption: 5.0W
- Operating Voltage Range: 10 ~ 27.6V DC
- Starting Voltage: 10V DC (25°C power on/off)
- Operating Temperature Range: -10°C ~ +70°C
- Storage Temperature Range: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 3100 RPM ± 10% at rated voltage
- Air Flow: 108.2 CFM
- Static Pressure: 0.28 Inch-H2O
- Acoustic Noise: 44.5dB (A)
- Insulation Class: UL Class 5
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: Applied 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 70,000 hours at 40°C, 60% humidity, 90% CL
- Protections: Automatic Restart, Polarity Protection
|
|
A 24V DC 120mm Sunon Ball Bearing Cooling Fan (#EEC0252B1-0000-A99) with thermoplastic frame. |
![F1162 120mm 24VDC Ball Bearing Cooling Fan](https://images.altronics.com.au/thb/f/F1162.jpg) |
F1162 NEW
|
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles, brushless DC motor
- Bearing System: Precision ball bearing system
- Frame/Fan Blade Material: Thermoplastic PBT of UL 94V-0
- Rotation: Counter-clockwise (viewed from the front of the blade)
- Mounting Holes: 8 x 4.3mmØ
- Dimensions: 120 x 120 x 25mm
- Weight: 157g
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 146mA
- Rated Power Consumption: 3.5W
- Operating Voltage Range: 10 ~ 27.6V DC
- Starting Voltage: 10V DC (25°C power on/off)
- Operating Temperature Range: -10°C ~ +70°C
- Storage Temperature Range: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2700 RPM ± 10% at rated voltage
- Air Flow: 93 CFM
- Static Pressure: 0.22 Inch-H2O
- Insulation Class: UL Class 5
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: Applied 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 70,000 hours at 40°C, 60% humidity, 90% CL
- Protections: Automatic Restart, Polarity Protection
|
|
A 24V DC 120mm Sunon Ball Bearing Cooling Fan (#EEC0252B2-0000-A99) with thermoplastic frame. |
![S2691A Spare Key To Suit S2690A](https://images.altronics.com.au/thb/s/S2691A.jpg) |
S2691A NEW
|
|
|
|
Replacement key to suit S2690A battery isolator key switch. |
![S2690A Battery Isolator Key Switch](https://images.altronics.com.au/thb/s/S2690A.jpg) |
S2690A NEW
|
|
- Sturdy construction
- Great compatibility
- Safety protection
- Wide range of applications
|
|
This waterproof battery disconnect switch ins made up of 1 x battery switch, 1 x key and 1 x waterproof cover. |
![RT4808A 47uF 63V High Temp. PCB Electrolytic Capacitor 2K Rl](https://images.altronics.com.au/thb/r/R4710.jpg) |
RT4808A NEW
ROHS
|
|
|
|
High temperature rating (105°C ) for constant, reliable operation.
2K reel and tape pack.
Note: Sleeve colour may be black or green. |
![K8615 Halot One Plus 3D Printer](https://images.altronics.com.au/thb/k/K8615.jpg) |
K8615 NEW
|
|
- 7.9" 4K mono LCD
- Self-developed integral light source
- High performance mainboard
- Z-axis with dual linear rails
- 5" HD touch screen
- Air filtration system
- Multiple slicing software
- Supports Creality Cloud APP
- Supports OTA updates
- Compatible with HALOT-BOX Lychee and CHITUBOX
|
|
The large 7.9" 4k mono LCD screen with a resolution of 4320*2560, vividly prints out every detail. With an upgraded 172 x 102 x 160mm build volume, it has a 73% volume increase compared to the 6" LCD and supports both smaller or larger models. |
![K8612 CR-10 Smart Pro 3D Printer](https://images.altronics.com.au/thb/k/K8612.jpg) |
K8612 NEW
|
|
- 300°C high temp nozzle.
- 300 x 300 x 400mm build volume.
- HD monitor camera in-built.
- Wi-Fi, Bluetooth and Ethernet connectivity.
- Trapezoidal design for added stability on large volume prints.
- Wide compatability with a variety of filament including PLA, ABS, PVA, TPU, PA, PETG and wood.
- Full-metal dual gear direct extruder.
- CR Touch 16 point automatic levelling sensor or manual levelling as desired.
- LED light bar.
- Spring steel flexible magnetic build plate.
- Silent main board - no noisy stepper motors!
- Filament sensor.
- Pause/resume printing.
- Creality Cloud Printing with iOS/Android app support.
- Supplied mostly assembled to get you printing faster (assembles in under 30 mins).
|
|
The 7 module design of this high performance 3D printer enables assembly within 10 minutes. |
![K8610 Ender-3 S1 Pro 3D Printer](https://images.altronics.com.au/thb/k/K8610.jpg) |
K8610 NEW
|
|
|
|
This high performance 3D printer with a more aesthetic, streamlined design, features a brand new nozzle made of brass that can stand up to +300°C printing temperature and is compatible with PLA, ABS, PVA, TPU, PA, PETG and wood. |
![S8871C ThinkVision S22E-20 21.5](https://images.altronics.com.au/thb/s/S8871C.jpg) |
S8871C NEW
|
|
- Low blue light/flicker free
- AMD FreeSync technology
|
|
A perfect all around display with stunning images that stretch from edge to edge. Features a compact slim design that will look smart in any space. |
![D4444 N Male to SMA Male Lead 6m](https://images.altronics.com.au/thb/d/D4444.jpg) |
D4444 NEW
|
|
- Cable Type: LMR240 LSHF
- Length: 6 metres
- Connections: N Type Male, SMA Male
|
|
This 6 metre N type male to SMA male cable provides easy connection to antennas for 4G/5G booster systems in vehicles and fixed installations. |
![N0080G 80W 12V Monocrystalline Solar Panel](https://images.altronics.com.au/thb/n/N0080G.jpg) |
N0080G NEW
|
|
- Excellent performance under low light conditions, creating better kWh/kW ratio and produces an average of 2-3% more electricity.
- Anti reflective and self cleaning glass surface reduces power loss due to dirt and dust.
- Junction box and bypass diodes make sure the modules do not overheat or create a "hot spot" effect.
|
|
This quality 80W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. |
![T1512B Wire Strippers 10AWG-22AWG](https://images.altronics.com.au/thb/t/T1512B.jpg) |
T1512B NEW
|
|
- ABS case coating with rubber TPR
- Light weight, compact, cost-effective, easy to operate.
- Optional stripping blade for different AWG cables
- The cassette can be reversed to change coaxial cable
- Easy to adjust with thumb screw
- Spring loaded with locking clip
|
|
These hardened carbon steel wire strippers are designed to strip 10-22AWG (0.3-5mm2) stranded and 14-24AWG solid core cable. Spring loaded with locking clip. |
![C2186 165mm (6.5](https://images.altronics.com.au/thb/c/C2186.jpg) |
C2186 NEW
|
|
- Power taps: 0.33, 0.66, 1.25, 2.5, 5 watts
- SPL 1W @ 1m: 91dB @ 1kHz ±2dB
- Freq response: 90Hz - 20kHz
- Grille: Steel
- Ceiling cutout: 195mm Ø
- Mounting depth: 100mm
- Terminal type: 2 way screw terminal
|
|
The C2186 is a 165mm (6.5") dual cone speaker with a 5W transformer. |