|
Description |
Downloads |
Specs |
Ordering |
|
 |
P0693A NEW
|
|
- Material: Plastic
- Voltage measurement range: 5-30V
- Battery measurement range: 0-65A (green: full, orange: half capacity, red: low capacity)
- Outer diameter: 36mm
- Thread diameter: 29mm
- Length: 52mm
|
|
Voltmeter with capacity graph suitable for 12V or 24V battery systems. Designed to fit P0679-81, but can also be used standalone. 29mm mounting hole. 52 mm thread length. 5-30V input. |
 |
Z6382A NEW
|
|
- Dimensions: 32L x 25H x 24Wmm
- Sensor Outputs: Digital Output
- Required Supply Voltage: 5V - 20V
- Digital Output: 3.3V (High)
- Digital Output: 0V (Low)
- Quiescent Current: <50uA
- Delay Time: 0.5 - 200 Seconds
- Range 5m - 7m
- Angle Sensor: <100° cone angle
- Operating Temperature: -15°C to 70°C
- Lens size sensor: Ø23mm
|
|
When this motion sensor module is used in projects it can detect motion based on changes in infrared light in the environment. It is ideal to detect if a human has moved in or out of the sensor range. An LED will light up when movement is detected. This makes the module a great addition to security application projects. |
 |
S9265A NEW
|
|
- Input Voltage: 44-57VDC
- Output Voltage: 5VDC
- Output Current: 2.4A
- Ports: 1 x RJ45 Ethernet Plug
- 1 x RJ45 Ethernet Socket
- 1 x USB C Plug
- PoE Standard: IEEE 802.3af
- Network Speed: 10/100Mbps
|
|
Allows you to power Single Board Computer such as the Raspberry Pi via PoE. USB C 5V output. Eliminates the need for a local power supply. 12V, 15.4W max. |
 |
M8199B NEW
|
|
- 17500mAh internal lithium-ion battery
- 150W modified sine wave 240V AC inverter
- 3 x USB outputs (Type A, Type A QC3.0 & Type C)
- 2 x 2.1mm DC jack output
- MPPT solar charger in-built (3A max PV input)
- Recharge by solar panel, mains or car charger
- In-built LED torch with SOS flash
- Colour LCD screen with capacity readout
|
|
Your all-in-one outdoor power hub—240V AC, DC, USB, solar charging, and a torch—perfect for camping and beyond. |
 |
S2694 NEW
|
|
- Pre-wired for simple installation
- Includes 100A battery isolator switch
- SB50 Anderson Style input and output
- Dual car accessory sockets
- 60W USB C PD charger
- 4 x 2.4A USB A charging ports
- Weather resistant caps on all connections
- Internal fuse block
|
|
Designed to manage power distribution in your 12V or 24V vehicle. Measuring just 160x160x80mm, this box is packed with connections. |
 |
D3012 NEW
|
|
- Continuity test for short circuit and open condition - shows pin configuration
- Cable length measurement up to 200m (±1.6m)
- Digital, analog and PoE testing modes
- 802.3af/at PoE port testing with pin detection
- Port flash and switch detail display
- Easy to read backlit graphical screen
- Non-contact AC voltage detection on receiver probe
|
|
A complete PoE cabling tester with cable tracer receiver, cable length testing,
|
 |
P0772A NEW
|
|
- Locking 240 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
- Unique Neutrik chuck type strain relief
|
|
Extra heavy duty Neutrik Powercon connector as used in commercial lighting and audio applications. Power Out version. NAC3FXXB-W-S 20A 240V. SAA approved. |
 |
P0773A NEW
|
|
- IEC EN 60320-1 / UL 60320-1 / CSA C22.2 No. 60320-1 certified, thus accepted as a component for cord sets acc. to IEC 60799 / UL 817 and equipment acc. to IEC 62368-1
- Ergonomic design with slip-proof two-component moulded housing
- Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
- Unique NEUTRIK locking bushing and strain relief for cable diameters 6 mm to 12 mm
- Easy to assemble because the strain relief locks with the insert mechanically and aligns with the housing
- Superior NEUTRIK quality standard, extremely robust and reliable
- Easy and reliable twist lock system
- Improved kink protection by two-component bushing
|
|
Extra heavy duty Neutrik Powercon connector as used in commercial lighting and audio applications. NAC3FXXA-W-S. SAA approved. |
 |
P0775A NEW
|
|
- Locking 250 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
|
|
Extra heavy duty Neutrik Powercon connector as used in commercial lighting and audio applications. NAC3MPXXA. SAA approved. |
 |
T2825B NEW
|
|
|
|
Ideal for trimming component legs and cutting and stripping small cables. |
 |
S4999DP NEW
|
|
- High energy density (3V) with a flat and low self-discharge.
- Design, safety, manufacturing, and qualification follow Procell’s stringent battery standards, which incorporate parts of the ANSI and IEC battery standards.
- Economically packaged.
- Child safety: tamper-proof pack with double blister so that it is impossible for a child to open without scissors and a bitter taste layer applied on the back of the cell to discourage swallowing.
- Operating temperatures from -30°C to 70°C.
|
|
Procell Lithium Coin Intense 2032 industrial batteries are designed to deliver reliable and safe power in professional devices. |
 |
T2130 NEW
|
|
- Three-speed Torque
- Versatile all in one tool
- Unique case design houses all 180 pieces, keeping every bit easily accessible.
- Essential tool for everything from device repairs to professional mechanical maintenance.
- Automatic power off after 60 seconds.
- Automatic power on at button press.
|
|
The Jakemy JM-8193 is an electronic screwdriver set suitable for various tasks, from home repairs to professional maintenance. The multifunctional handle offers three-speed torque options suitable for modern high tech devices. |
 |
Q1340B NEW
|
|
- Single way to test plug crimping quality
- Wire tracing & cable mapping at the same time
- Easily locate the port with a flashing signal
- PoE switches & STP wire tracing up to 3KM
- Telephone line status/polarity indication
- Cable mapping & status indication up to 300M for continuity, shorts, opens and crossover
- Fast/slow scan function
- Display cable status and troubleshoot wiring
- Non- contact voltage detecting
|
|
This Noise-Filtering Network PoE Toner & Probe allows users to quickly locate and verify the cable status and troubleshoot wiring for continuity, shorts, opens and crossover on RJ45, Lan cable Cat5, 5e, 6 (UTP/STP), RJ11/12 telephone cable Cat. 3 (2/4/6 pin) & normal solid/stranded wire by alligator clips patch cord. |
 |
A6541 NEW
|
|
- User programmable buttons & icons
- Multiple screen pages (12 max)
- Tandem operation
- Event splash screens
- Icon library for commonly used buttons
- Infra-red control output
- RS-232 or RS-485 serial outputs
- PIR motion trigger
- Haptic & audible button feedback options
- U/UTP Cat5 cable connection
- Multi-command macros
- IR learning facility
- SD card configuration upload
- Easy to program
|
|
This universal touchscreen wallplate is the perfect control system for commercial and domestic automation. Its stylish low profile design lends itself to installation in new modern homes, classrooms, lecture theatres or corporate boardrooms. |
 |
A6530 NEW
|
|
- User programmable buttons & icons
- Multiple screen pages (12 max)
- Tandem operation
- Event splash screens
- Icon library for commonly used buttons
- Infra-red control output
- RS-232 or RS-485 serial outputs
- PIR motion trigger
- Haptic & audible button feedback options
- U/UTP Cat5 cable connection
- Multi-command macros
- IR learning facility
- SD card configuration upload
- Easy to program
|
|
This universal 7" touchscreen wallplate is the perfect control system for commercial and domestic automation. Its stylish low profile design lends itself to installation in new modern homes, classrooms, lecture theatres or corporate boardrooms. |
 |
D0889 NEW
|
|
- Offering the best protection in its class, protecting against damaging surges
- Modern, stylish LCD display indicates voltage in/out, amount of load and remaining capacity
- The AVR automatically bucks/boosts unstable fluctuating utility voltages, bringing them within 10% of nominal voltage range and thereby protecting valuable equipment
- Compact design at just 300mm deep
- Intelligent slot for SNMP communications card
- Battery is easily hot swappable and user replaceable
- Designed to run cool without fans
- After an extended power outage the UPS will turn back on and resume equipment functionality once power has returned
- Allows for orderly shutdown without software
- Free, downloadable NetGuard software provides complete power monitoring
- The plugged in UPS will continue to charge internal batteries whether the unit is on or off
- Comes standard with 5 Australian sockets and 2 IEC outlets.
- The UPS can turn on equipment when it is off, simply by connecting equipment and turning the UPS on
- Plug and play on any computer or NAS drive
|
|
The Defender Rackmount 1500VA UPS expands the successful Defender Range by building the popular features into a Rack Mount style. At 300mm deep, this is the perfect UPS for shallow, wall mounted Comms cabinets. |
 |
M9493 NEW
|
|
- Output Voltage: 18V DC 1000mA
- Operating Voltage: 230-240V AC
- F-Type Male Connector
- Short Circuit Protection
- Fully Compliant with Australian and New Zealand Safety and MEPS Regulations
|
|
PSK18M. Kingray’s power supplies have constantly maintained their reputation as the highest quality and most reliable power supplies to the antenna industry. They feature posistor protection circuitry and fully comply with Australian and New Zealand Energy Standards. |
 |
A4389 NEW
|
|
- 6 Balanced microphone inputs / 6 Aux inputs / 1 Music input
- Robust design incorporating latest Mosfet technology
- Very Low noise and distortion
- 100V standard with optional 70V and 4-16Ω outputs
- 240V AC or 24V DC operation
- VOX muting on inputs 1 and 2 (Switch selectable internally)
- Adjustable VOX level sensitivities
- Bass and Treble controls
- Tape Output
- Phantom power on microphone inputs (DIP switch selectable internally)
- Multi stage thermally cued fan cooling
- Output Peak Limited
- Thermal Overload protected
- Signal Presence Indicator
- Half power mode when overdriven
- Fault Indicators
- 24V DC Power Status Indicator
- Optional Alert/Evac module with voice over message for emergency tones (A 4573)
- Optional remote volume (With A 4373 Digital volume control module fitted and external A 2280B wall plate)
- Rack Mountable (suits 19 inch racks) with optional A 4376 rack ears
|
|
Designed for applications requiring up to six microphone inputs, without compromising output power and overall performance. Each model features inputs which can be configured for either microphone or line level operation. |
 |
S0151 NEW
|
|
|
|
Standard dual cover wallplate fitted with an S0921 green LED illuminated momentary pushbutton switch. |
 |
S0154 NEW
|
|
|
|
Standard dual cover wallplate fitted with an S0921 green LED illuminated momentary pushbutton switch. |
 |
Z6491 NEW
|
|
- Wide Current Range: Supports motor loads ranging from 5A to 22A, ensuring flexibility for various DC motor applications.
- PWM Technology: Utilizes Pulse Width Modulation to efficiently regulate motor speed while minimizing energy loss and heat generation.
- MOSFET Control: Integrated high-efficiency MOSFETs for stable, reliable, and high-current output performance.
- Compact Design: Designed for easy integration into small projects and enclosures.
- Opto-isolated input.
|
|
The PWM MOSFET Motor Speed Controller is a high-performance module designed to provide precise control of DC motor speed using Pulse Width Modulation (PWM) technology. |
 |
PC0667 NEW
|
|
- USB type: Type C X 1, Type C X1
- The number of USB Ports: 2
- Normal voltage: 24VDC
- Operating Voltage: 9V-30V DC
- Peak Voltage: 34V DC(max)(3-4seconds)
- USB TypeC -1 output:
- QC4.0 (5V/3A/15W, 9V/3A/27W, 15V/3A/45W, 20V/3A/60W)
- USB TypeC -1 output:
- QC4.0 (5V/3A/15W, 9V/3A/27W, 15V/3A/45W, 20V/3A/60W)
- Current Draw Quiescent current: 5MA
- Life: 5000 operating cycles
- Sealing:IP65
- Terminals: Copper/nickel plating 1/4"(6.3mm)
- Operating Temperature: -20 - +80°C
- Panel Opening: 29.2 x26. 2 mm
- Low-voltage protection: YES (Lower than 40V)
- Over current protection: Yes
- Over temperature protection: Yes
- Short circuit protection: Yes
- Reverse polarity protection: Yes
|
|
Upgrade your charging setup with the 4.0A Dual USB Type-C Charging Panel Mount Socket, designed for fast, efficient power delivery in a sleek and durable form. |
 |
D2208A NEW
|
|
- Qi Wireless Charging
- Motorised to fit your phone automatically
- Comes with a USB Type C lead
- Safely use navigation apps in the car
- Air vent spring mount
- Suction cup mount
|
|
This 15 Watt Qi Wireless Charging Universal Phone Car Mount will not only charge your phone with its wireless fast charge feature but it will also allow you to safely use navigation apps in the car. |
 |
P8166 NEW
|
|
- 240V AC 10A outputs.
- 7 x Australian Sockets (AS/NZS 3112:2017 conforming).
- Electrical authority outlet device approved (AS/NZS 3105:2014 conforming).
- High surge protection.
- Overload protection.
- Power cord located at the rear for less interference.
- 19” rack ear mounting.
|
|
The neat solution to supplying mains power to your mounted equipment. |
 |
Z6302J NEW
|
|
- Broadcom BCM2712 quad-core Arm Cortex A76 processor @ 2.4GHz
- RAM variants up to 8GB
- Interchangeable Camera and DSI display connectors
- Dual 4Kp60
- Real-time clock
- Power button
- UART debug port
|
|
The Raspberry Pi 5 4GB single board computer. The bandwidth speed and performance of the new Raspberry Pi 5 is a step up from earlier models. |