|
Description |
Downloads |
Specs |
Ordering |
|
 |
A0319A NEW
|
|
|
|
A comprehensive travel charger to keep all your portable devices charged while at home or overseas! |
 |
A0323 NEW
|
|
|
|
A comprehensive all-in-one USB travel charger to keep all your portable devices charged while at home or overseas! It features 65W USB C power delivery output for laptops, mag safe compatible wireless charging for your phone and a standard USB A QC3.0 output for simultaneous charging of up to 3 devices. |
 |
A0329 NEW
|
|
- Easy to install
- Kinetic Wireless
- 150m Operating Range: 150m in open air
- 58 melodies available
- 4-Level Volume Control
- Receiver has a flashing LED Indicator
- IP44 Waterproof Push Button
- Music IC with memory function, ringtones and volume keep same when powered off
|
|
Say goodbye to changing doorbell batteries with this wireless Kinetic home doorbell. |
 |
A0713 NEW
|
|
- Operating voltage: 12 - 15 V/DC
- Current consumption: approx. 20 mA / 80 mA (relay off / on)
- Adjustable time: approx. 2 sec. to 23 min., (± 30 %)
- Connection: via flat-pin plug at the module
- LED: 2 (1 x LED operating voltage, 1 x LED relay “ON”)
- Relay point: 1 x ON, max. 3A, max 25V
- Dimensions: approx. 87 x 60 x 33 mm (with flanges)
|
|
Avoid the hassle with this pre-assembled timing controller, conveniently packaged in a compact and reliable form. It's easy to connect and versatile enough to adapt to your requirements. The start and stop functions are managed by simple switching contacts, and the relay output can control devices up to 25VDC at 3A. |
 |
A1009A NEW
|
|
- Easy to learn codes
- Permanent memory
- Compact and lightweight
|
|
Compact universal remote control uses infrared (IR) technology to operate multiple appliances such as TVs, set-top boxes, fans etc. |
 |
A1717B NEW
|
|
- Electrical
- Power supply: 24V DC to 30V DC 300mA (idle/maximum current draw 150mA) tip positive
- Output line: Stereo RCA 500mV nominal
- MP3 sample rate: 44kHz
- SD card size: 256MB to 16GB
- Trigger activation: Closing contact
- Switched output: 24-30VDC out (supply voltage dependent), limited to 120mA current draw
- MP3 Info
- MP3 File Format: Minimum 128kbps, 44.1kHz, 32bit, VBR or CBR, Stereo
- Length/size: Limited by card size (1600mins @ 128kbps, 44kHz on supplied 16GB)
- Bit rate: All standard MP3 rates (128kbps recommended)
- Sample rate: All standard MP3 rates (44kHz recommended)
- Channels: Stereo or mono
|
|
The A 1717B is an MP3 based message player housed in a compact flange mount aluminium enclosure and offers playback of four MP3 tracks. |
 |
A1720C NEW
|
|
- Custom tracks
- Inbuilt tone & phrase library
- 12-30V DC operation @ 300mA (switched output only operates at 24V+).
- Micro SD card included
- All connections made via screw terminals
- Tones conform to Australian standard
- Provision for voice over in evacuation mode
- Random play on triggers - if multiple MP3s in trigger folder, they will be played at random.
- Optional MP3 playback on trigger cancel (alternate mode only)
- Compact size: 120 x 70mm
|
|
The A 1720C is an MP3 based message player and tone generator designed for public address, security, customer direction or emergency evacuation announcements. |
 |
A2260B NEW
|
|
 Designed & manufactured in Australia.
- Since 1974 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
 |
A2261B NEW
|
|
- Designed & manufactured in Australia.
- Since 1974 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
New models supplied with two facia covers to suit your decor.
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. They feature 11 position switches |
 |
A2262B NEW
|
|
- Designed & manufactured in Australia.
- Since 1974 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
New models supplied with two facia covers to suit your decor.
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. They feature 11 position switches |
 |
A2691B NEW
|
|
- 2 x 100W RMS output power @ 4 Ohm
- FM Stereo tuner
- Bluetooth 5.0 Wireless input
- 30 FM station presets
- Volume level & input selection memory
- 4 stereo RCA inputs
- Tape input/output
- A-B speaker switch
- Remote control
|
|
A stylish 2 x 100W (into 4 Ohm) FM stereo receiver with bluetooth audio streaming and a remote control. It features four stereo RCA inputs for CD, DVD, TV and Auxiliary. The large rotary dial controls volume, balance, bass and treble. |
 |
A3133C NEW
|
|
- 8K Ultra HD support for resolutions up to 7680 x 4320 at 60Hz.
- High bandwidth of 48Gbps
- Extended range with simple in-line connection.
- Fully compliant with HDMI 2.1 standards for connection to all HDMI equipment.
|
|
Enhance your home entertainment or professional AV setup with this advanced HDMI repeater, designed to support ultra-high-definition resolutions up to 8K at 60Hz.
|
 |
A3831A NEW
|
|
- Extracts audio in 2.0 stereo, 5.1 surround or 7.1 surround sound.
- 3.5mm analog, RCA coaxial digital or S/PDIF optical outputs for audio.
- Supports DTS-HD, Dolby LPCM, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master audio formats.
- HDMI loop output support with maximum 8K @ 60Hz, 4K @ 120Hz and 1080p @ 120Hz.
- Supports Dolby Vision & HDCP 2.3 compliance.
- Supports variable refresh rate, VRR AMD Free-Sync G-Sync.
|
|
With the help of this audio extractor you can extract audio signals from any HDMI compliant source to digital optical or analog stereo audio outputs. |
 |
A4022A NEW
|
|
- Balanced microphone input
- Built in VOX muting circuit
- Stereo line inputs
- Bass and treble tone controls
- 240V AC operation
|
|
Designed to meet the requirements of small to medium sized professional public address installations, delivering an output power of 30W RMS. |
 |
A4024A NEW
|
|
- VOX muting on input 1.
- Balanced microphone inputs.
- Output muting circuit.
- Stereo line inputs & tape output.
- Bass and treble tone controls.
- Output terminals for 100V line and 8 - 16Ω loads
- Over-voltage, over current, thermal run-away and short circuit load protection.
- Muting Features: VOX Muting Via Input 1, Switch Contacts and Output Muting
|
|
A staple of the Redback range since we first started, the 30W amplifier meets the requirements of small to medium public address installations. |
 |
A4026A NEW
|
|
- 19" rack system mountable.
- Push to talk (PTT) muting on microphone 1.
- Balanced microphone inputs.
- VOX muting circuit.
- Stereo line inputs & tape output.
- Bass and treble tone controls.
- Output terminals for 100V line and 8 - 16Ω loads
- Over-voltage, over current, thermal run-away and short circuit load protection.
|
|
A staple of the Redback range since we first started, the 30W amplifier meets the requirements of small to medium public address installations. Rack mount version of Redback A 4024A. |
 |
A4423 NEW
|
|
- 1 microphone/ 4 line inputs (mono mixed internally)
- Front 3.5mm music input (overrides rear input 4 input)
- Bluetooth audio connection (overrides input 4 front and rear inputs)
- 2 outputs via XLR/RCA 1V balanced
- Level controls for all inputs
- Separate bass and treble controls on all inputs
- Adjustable input sensitivity on all RCA line inputs
- Phantom power selection on Mic inputs (12V DC)
- Route signals to each output or both outputs
- 24V DC input
- 24V DC battery back up terminals
- 1RU 19” rack mount case
- 10 Year Warranty
- Australian designed & assembled
|
|
The Redback® mixer delivers a flexible and installer-friendly solution with one microphone/line input and three additional line inputs (all internally mixed to mono), plus a front-panel 3.5mm music input and integrated Bluetooth® receiver.
|
 |
A4427A NEW
|
|
- Eight input channels
- Micro SD card message player for audio announcements
- Individual level, bass and treble control on all inputs
- Six levels of VOX priority
- Adjustable VOX sensitivity
- Alert and Evacuation override mode
- 3.5mm music input
- Adjustable input sensitivity on line inputs
- 24V DC battery back up terminals
- In built Alert/Evac/Chime functionality
- 24V DC output
- MP3 active indicator
- LED VU meter
- 10 Year Warranty
- Australian Designed and Manufactured
|
|
This unique Redback PA mixer features four input channels which are user selectable for either balanced mic, line or auxiliary use. In addition it incorporates a four channel SD card based message player making it an excellent choice for retail, supermarkets, hardware stores and more. |
 |
A4565C NEW
|
|
- Tones conform to AS 1670.4
- Standard 1U 19” rack mount case
- Interfaces with Fire Indicator Boards
- Remote operation of Alert, Evac, Chime, Fire Test, Fire Alarm & Cancel tones
- MP3 based tone playback (with backup hard coded Alert, Evac and Bell tones)
- 24V DC operation
- Auto/Manual/Isolate keyswitch
- Key switch to 003 standard
- Local operation of Alert, Evac and PA
- MP3 based Voice Over messages for Alert and Evac cycles
- Microphone socket for PA use
- Provision for BGM (back ground music)
- Provision for Auxiliary input with front volume control
- Bell chime facility
- Switched 24V DC output for override relays on volume controls
- Switched 24V DC output for strobe operation for Alert mode
- Switched 24V DC output for strobe operation for Evac mode
- Switched 24VDC output for bell mode
- On-board timer for automatic Alert to Evac switchover, adjustable from 30secs to 7.5min in 30 second increments
- Externally operated inputs are activated by switching to ground
- Auxiliary level output
- Suitable for any amplifier with an auxiliary input
- 10 Year Warranty
- Australian Designed and Manufactured
|
|
This easy to operate building alert & evacuation controller controller is designed around industry standard building requirements. When connected to a paging system amplifier, occupants can be alerted and/or evacuated in the event of an emergency eg: fire, gas leak, bomb scare, earthquake. |
 |
A4574B NEW
|
|
- Level controls for alert/evac, bell and voice over
- Front panel alert/evac/bell and cancel switches
- All tones MP3 based
- Alert/Evac Emergency tones can be configured for momentary or continuous operation
- 1U half rack cabinet
- Alert and Evac Tones conform to AS 1670.4 (Library included on Micro SD card)
- Compatible with fire indicator boards & break glass alarms
- Remote operation of alert , evac, bell tones & cancel.
- Local operation of alert, evac and bell
- MP3 based Alert and Evacuation Voice over message facility
- Bell chime facility
- Switched 24V DC outputs for override relays or strobes (outputs limited to 120mA)
- On-board timer for remote alert activation adjustable from 30secs to 7.5min in 30 second increments.
- Switches from alert to evac after preset time.
- Auxiliary level output
- 10 year warranty
- Australian designed and manufactured
|
|
This unit has provision for playback of Alert, Evacuation and chime tones as well as an alert and/or emergency message. When connected to a paging system amplifier, building occupants can be alerted and/or evacuated in the event of an emergency e.g.: fire, gas leak, bomb scare, earthquake. |
 |
A4660A NEW
|
|
- Standard Features:
- Touch control paging with pre and post announcement chime options.
- Adjustable microphone automatic gain control (AGC).
- High quality electret microphone with high ambient noise control and feedback rejection.
- Adjustable backlight brightness and dimmed brightness levels with selectable timeout period.
- All glass front bezel for a stylish finish for any room.
- Connects via economical Cat5e UTP cabling.
- For long cable runs (approx. 200m+) we recommend using our A 4658 Power Injector.
|
|
This paging console is designed to provide general paging to zones when connected to a variety of Redback products. It provides a visual indication of the status of all audio sources and zones within the system at a glance, sharing a common screen with the master wallplates available for use with these systems. |
 |
A4866 NEW
|
|
- Encodes balanced line level or stereo RCA inputs for streaming across an IP network.
- Configurable IP addresses for each unit.
- Allows for multiple encoders and decoders on a network.
- Can be used with pre-existing UTP cabling - ideal for multi building facilities utilising local zone amplifiers for PA.
- Web portal set up.
- Local level adjustment.
- Can be powered via PoE or local 12V DC plugpack.
|
|
The Merlaud IP Communicator balun system provides an easy way to send balanced audio line signals over network IP systems. |
 |
A4867 NEW
|
|
- Decodes balanced line level or stereo RCA inputs for streaming across an IP network (when used with A4866).
- Configurable IP addresses for each unit.
- Allows for multiple encoders and decoders on a network.
- Can be used with pre-existing UTP cabling - ideal for multi building facilities utilising local zone amplifiers for PA.
- Web portal set up.
- Local level adjustment.
- Can be powered via PoE or local 12V DC plugpack.
|
|
The Merlaud IP Communicator balun system provides an easy way to send balanced audio line signals over network IP systems. |
 |
A4958 NEW
|
|
- Input Level Sensitivity: 100mV/1V
- Output Level Sensitivity: 100mV/1V
- Input Connectors: 3 pin XLR balanced, 2 x RCA
- Output Connectors: 3 pin XLR balanced, 2 x RCA
- Dimensions: 40W x 83D x 50H
- Weight: 0.2 kg
|
|
The Redback A 4958 is a compact, professional-grade pre-amplifier designed for versatility and reliability. It accepts both XLR and RCA inputs and provides a volume-adjustable XLR or RCA output, with RCA signals internally mixed to mono. |
 |
C0359A NEW
|
|
- USB powered. Easy to power anywhere.
- Provides 48V phantom power to condenser microphones.
- Balanced XLR input and output.
- Additional 3.5mm stereo mixed output.
- Rugged, compact metal enclosure.
- Power and input status LED indicators.
- Ideal for desktop studios, field recording, and content creation.
|
|
A compact and convenient desktop phantom power solution. USB-powered for maximum portability and versatility. Designed for use with condenser microphones requiring 48V phantom power, this unit features balanced XLR input and output connections for seamless integration with professional audio equipment |
