|
Description |
Downloads |
Specs |
Ordering |
|
 |
D2364 NEW
|
|
- A compact hub with 13 connections in one unit.
- Tough aluminium casing, ideal for carrying on the go.
- 2 x HDMI ports.
- 1 x VGA port.
- Micro SD and SD card slots.
- USB C Power Delivery (PD) charging.
- USB C data transfer.
- 3.5mm stereo audio.
- 4 x USB 3.0 ports.
- Wired RJ45 ethernet interface port.
|
|
This handy hub features USB C connection to your laptop and provides 4 x USB 3.0 type A ports, USB C port, 2 x HDMI ports, SD/microSD card slot, 3.5mm headphone out, wired gigabit ethernet interface and VGA connection. |
 |
D2384 NEW
|
|
|
|
This cable allows you to connect Lightning equipped devices to USB C ports for charging, data transfer etc. Length: 2m |
 |
D3012 NEW
|
|
- Continuity test for short circuit and open condition - shows pin configuration
- Cable length measurement up to 200m (±1.6m)
- Digital, analog and PoE testing modes
- 802.3af/at PoE port testing with pin detection
- Port flash and switch detail display
- Easy to read backlit graphical screen
- Non-contact AC voltage detection on receiver probe
|
|
A complete PoE cabling tester with cable tracer receiver, cable length testing,
|
 |
D4197 NEW
|
|
- 48 10/100/1000Mbps RJ45 ports
- Innovative energy-efficient technology saves power up to 18%
- Supports MAC address self-learning and auto MDI/MDIX
- Standard 19-inch rack-mountable steel case
|
|
This high speed TP-Link 10/100/1000Mbps ethernet switch allows multiple computers to be connected together. Further computers may be added by daisy-chaining more switches together. Plugpack included. Rack mountable. |
 |
D4211 NEW
|
|
- Five 10/100/1000Mbps RJ45 ports
- Equipped with four 802.3af/at PoE+ ports with up to 30W for each port, data, and power can be transferred on one single cable
- Supports PoE power up to 65 W for all PoE ports*
- Provides network monitoring, traffic prioritization, VLAN features, and PoE Auto Recovery
- Simple network set-up on top of plug-and-play connectivity
- Web-based user interface and Easy Smart Configuration Utility simplify configuration
- Fanless design lowers energy consumption and eliminates operating noise
|
|
Professional 5-Port Gigabit Easy Smart Switch with 4-Port PoE+
Easy to Use, Multi-Purpose PoE Switch with Powerful Performance |
 |
D4214 NEW
|
|
- 16× gigabit PoE+ RJ45 ports, 2× gigabit non-PoE RJ45 ports, and 2× combo gigabit SFP slots
- High PoE power budget with up to 30 W for each PoE port and 250 W for all PoE ports*
- Working with IEEE 802.3af/at compliant PDs
- Plug and play, with no configuration and installation needed
- 802.1p/DSCP QoS enable smooth latency-sensitive traffic
- Durable metal casing and professional heat dissipation design ensure a wide operating temperature range (0–50 ℃)
|
|
Plug and Play, Multi-Purpose PoE Switch with Powerful Performance |
 |
D4278B NEW
|
|
- 300 Mbps wireless speed ideal for smooth HD video, voice streaming, and online gaming
- Supports multiple operation modes: Access Point, Multi-SSID, Client, and Range Extender modes
- Protects your home network with WPA2 encryption and makes quick connection with the push of a button
- Up to 30 meters (100 feet) of flexible deployment with included Passive Power over Ethernet Injector
|
|
The TP-LINK Wireless N Access Point TL-WA801N is designed to establish or expand a scalable high-speed wireless N network or to connect an Ethernet-enabled device such as a game console, digital media adapter, printer, or network-attached storage device to a wireless network. |
 |
D4344 NEW
|
|
- Faster Connections: Wi-Fi 6 speeds up to 1,800 Mbps—1,201 Mbps on 5 GHz and 574 Mbps on 2.4 GHz.
- Connect More Devices: OFDMA and MU-MIMO technology quadruple capacity to enable simultaneous transmission to more devices.
- Boosted Seamless Coverage: Achieve seamless whole home coverage with a clearer and stronger whole home Wi-Fi signal generated by Wi-Fi 6.
- Ultra-Low Latency: Greater reduction in latency enables more responsive gaming and video chatting.
- One Unified Network: Multiple units form a whole-home network that auto-selects the best connection as you move around your home.
- Total Security: WPA3 encryption and TP-Link HomeShield provide personalized features, including Parental Controls, Antivirus, and Quality of Service (QoS) to ensure a safer online experience.
- Setup Made Easier Than Ever: The Deco app walks you through setup step-by-step.
|
|
Armed with Wi-Fi 6 technology, Deco X20 whole home mesh Wi-Fi is designed to deliver a huge boost in coverage, speed, and total capacity. Get on the latest mesh Wi-Fi to enjoy the future network that loads faster and connects more. |
 |
D4345A NEW
|
|
- Internet Everywhere with 4G+ Speed - Provides WiFi 6 Mesh coverage through 4G+ CAT6 access
- Superior WiFi 6 speeds up to 1.8 Gbps - 1201 Mbps (5 GHz) and 574 Mbps (2.4 GHz) dual-band WiFi with WiFi 6 technology
- Fully Gigabit Ethernet - 3x Gigabit WAN/LAN Ethernet ports provide flexible internet access at warp speed**
- TP-Link HomeShield - Real-time IoT and network protection, robust Parental Controls, and comprehensive reports
- 3G/4G Failover - Flexible access from Ethernet to 3G/4G to prevent data loss
|
|
Armed with a built-in 4G+ modem, WiFi 6, and TP-Link Mesh technology, Deco X20-4G delivers hassle-free 4G internet sharing with a superior whole-home mesh WiFi experience. Plug your SIM card in and enjoy! |
 |
D4346 NEW
|
|
- Deco uses a system of units to achieve seamless whole-home Wi-Fi coverage — eliminate weak signal areas once and for all!
- With advanced Deco Mesh Technology, units work together to form one unified whole-home network with the same network name. Devices automatically switch between Decos as you move through your home for the fastest possible speeds.
- A Deco M5 delivers Wi-Fi to an area of up to 350 square metres. And if that’s not enough, simply add more Decos to the network anytime to increase coverage.
- Deco M5 provides fast and stable connections with speeds of up to 1267 Mbps and works with the major internet service provider (ISP) and modem.
- Deco can handle traffic from even the busiest of networks, providing lag-free connections for over 100 devices.
- TP-Link HomeCareTM provides a suite of personalized and secure features, including Parental Controls, built-in Antivirus and Quality of Service (QoS).
- Setup is easier than ever with the Deco app there to walk you through every step.
|
|
This Deco M5 Whole-Home Mesh Wi-Fi Router System is the ultimate whole-home Wi-Fi solution with comprehensive security and filtering. It delivers fast, uninterrupted Wi-Fi to every room, improving coverage, speed and reducing dead spots. Deco is also easy to set up and grows as you add devices to your home. Dual band AC1300. |
 |
D4370A NEW
|
|
- Equipped with the latest wireless technology, Wi-Fi 6, for faster speeds, greater capacity and reduced network congestion.
- Next-Gen 1.5 Gbps Speeds
- Communicates more data to more devices using revolutionary OFDMA and MU-MIMO technology while simultaneously reducing lag.
- Triple-Core Processing ensures communications between your router and all connected devices are smooth and buffer-free.
- Achieve the strongest, most reliable WiFi coverage with Archer AX1500 as it focuses signal strength to your devices using Beamforming technology and four antennas.
- Increased Battery Life
- Easy Setup: Set up your router in minutes with the powerful TP-Link Tether App.
- Backward Compatible: Archer AX1500 supports all previous 802.11 standards and all WiFi devices.
|
|
This Archer AX1500 Wi-Fi 6 Router you can Wi-Fi 6 efficiently transmits data, enabling data packets for different applications to share one broadcast and cut the latency. |
 |
D4400A NEW
|
|
- Perfect for boosting 4G & 5G signals on 4WDs, trucks and fleet vehicles.
- Deploy the unit anywhere in the network, with full frequency coverage
- Latest 4th generation Nextivity proprietary IntelliBoost chip delivers channelized coverage for specific mobile network operator signals
- Support for 3G, 4G, and 5G dynamic spectrum sharing (DSS)
- Ease of installation with plug-and-play operation
|
|
The ideal product to boost and distribute a 3G/4G mobile signal within your 4WD or truck, boat or caravan. Supporting voice and mobile internet for multiple mobile devices, dropped calls and slow internet are a thing of the past. |
 |
D4426 NEW
|
|
- Optimum 6 dBi gain for flat and hilly areas
- Extra heavy-duty stainless steel spring
- High-vibration PTL-240 Ultra-Flex cabling
- 4.5 metres of cable with an industry-standard SMA Male connector
|
|
Designed to provide optimal gain across 3G and 4G bands used when travelling throughout Australia & abroad. |
 |
D4432 NEW
|
|
- 7 dBi gain across all mobile frequencies 698 to 960 MHz and 1710 to 2700 MHz
- White marine-grade fibreglass construction
- Short cable tail with a pre-fitted N Female connector Cable Sold Separately
- Operate with all mobile networks across Australia, New Zealand, and Internationally.
- Comes with an adjustable standard nylon mount
- Frequency: 698-2700MHz
- Dimensions: 70mm x 50mm x 1270mm
- Weight: 1kg
|
|
The Blackhawk Marine Antenna is designed to provide 4G connectivity in both close coastal and long range offshore boating. The antenna has the ideal 7 dBi gain that allows long range connectivity. |
 |
D4439 NEW
|
|
- 3G/4G/LTE wideband cellular antenna
- SMA Male connector
- Omni-directional
- 3m low loss high-performance cable
- Ground plane dependent
|
|
This antenna is an outdoor wideband cellular omnidirectional antenna with up to 4 dB gain. The weather-resistant IP67 plastic casings are built to securely attach to autos, trucks, vans, SUVs, and RVs. |
 |
D4444 NEW
|
|
- Cable Type: LMR240 LSHF
- Length: 6 metres
- Connections: N Type Male, SMA Male
|
|
This 6 metre N type male to SMA male cable provides easy connection to antennas for 4G/5G booster systems in vehicles and fixed installations. |
 |
D5040A NEW
|
|
|
|
This rubber "push-in" plug simply fits into an RJ45 socket to keep dust out. Ideal for patch panels, wallplates, hubs, etc. |
 |
D5508A NEW
|
|
- Designed for direct insertion of one 2.5 inch or 3.5 inch SATA HDD/SSD
- USB 3.0 SuperSpeed Interface, transfer rates up to 5Gbps
- Backwards-Compatible with USB 2.0, transfer rates up to 480Mbps
- Touch Control ON/OFF switch
- LED light indicates Power and Activity status
- Hot-swappable, plug and play, no drivers needed
- Support UASP (USB Attached SCSI) for Windows 8 and above, Mac OS 10.8 and above
- Compatible Operating Systems: Windows XP and above (32/64-bit), Mac OS 10.4 and above, Linux.
|
|
Take advantage of the latest high speed USB 3.0 transfer rates with this 2.5/3.5 SATA drive docking station. The dock station allows for a high effective heat dissipation. It offers swappable access to 2.5" and 3.5" SATA HDD/SSD without having to mount the hard drive or install it in an enclosure. |
 |
D5516A NEW
|
|
- Form Factor: 3.5"
- Cache: 256MB
- Capacity: 2TB
- Interface:SATA
- Product Description: WD Purple WD22PURZ - hard drive - 2 TB - SATA 6Gb/s
- Type: Hard drive - internal
- Data Transfer Rate: 600 MBps
- Buffer Size: 256 MB
- Features: Advanced Format technology, AllFrame, Conventional magnetic recording (CMR), support up to 64 cameras
- Dimensions (WxDxH): 101.6 mm x 147 mm x 26.1 mm
- Weight: 450 g
- Manufacturer Warranty: 3-year warranty
- Drive Transfer Rate: 600 MBps (external)
- Internal Data Rate: 175 MBps
- MTBF: 1,000,000 hours
- Non-Recoverable Errors: 1 per 10^14
- Load / Unload Cycles: 300,000
- Interfaces: 1 x SATA 6 Gb/s
- Compatible Bay: 3.5"
- Power Consumption: 3.8 Watt (read/write), 3.2 Watt (idle), 0.3 Watt (standby), 0.3 Watt (sleep)
- Compliant Standards: RoHS 2011/65/EU
- Min Operating Temperature: 0 °C
- Max Operating Temperature: 65 °C
- Min Storage Temperature: -40 °C
- Max Storage Temperature: 70 °C
- Shock Tolerance (operating): 30 g @ 2 ms
- Shock Tolerance (non-operating): 250 g @ 2 ms
|
|
Latest generation Western Digital 'WD purple' range of hard drives are optimised for the harsh demands of a modern HD multi-camera surveillance system where they will be running 24 hours a day 7 days a week. Model: WD22PURZ.
|
 |
DA0330A NEW
|
|
- Storage for your phone/camera/tablet to ensure you can carry on capturing every moment
- SanDisk® cards are compatible with Android smartphones and tablets
- Rated A1, the SanDisk Ultra® microSD™ card is optimised for apps, delivering faster app launch and performance that provides a better smartphone experience
- Blazing transfer speeds mean that your content moves fast letting you move up to 1000 photos in a minute
|
|
Improve the performance of your Android-powered and other smartphone or tablet with the SanDisk Ultra microSDHC or microSDXC** UHS-I Memory Card. The perfect choice for smartphone enthusiasts and tablet users. |
 |
DA0331A NEW
|
|
- Storage for your phone/camera/tablet to ensure you can carry on capturing every moment
- SanDisk® cards are compatible with Android smartphones and tablets
- Rated A1, the SanDisk Ultra® microSD™ card is optimised for apps, delivering faster app launch and performance that provides a better smartphone experience
- Blazing transfer speeds mean that your content moves fast letting you move up to 1000 photos in a minute
|
|
Improve the performance of your Android-powered and other smartphone or tablet with the SanDisk Ultra microSDHC or microSDXC** UHS-I Memory Card. The perfect choice for smartphone enthusiasts and tablet users. |
 |
DA0332A NEW
|
|
- Storage for your phone/camera/tablet to ensure you can carry on capturing every moment
- SanDisk® cards are compatible with Android smartphones and tablets
- Rated A1, the SanDisk Ultra® microSD™ card is optimised for apps, delivering faster app launch and performance that provides a better smartphone experience
- Blazing transfer speeds mean that your content moves fast letting you move up to 1000 photos in a minute
|
|
Improve the performance of your Android-powered and other smartphone or tablet with the SanDisk Ultra microSDHC or microSDXC** UHS-I Memory Card. The perfect choice for smartphone enthusiasts and tablet users. |
 |
DA0338B NEW
|
|
- Built for extreme conditions temperature proof, water proof, shock proof, and x-ray proof
- Delivers 4K Ultra HD and Full HD video recording and playback
- Meets the new UHS Speed Class 3 (U3) and UHS Video Speed Class 30 (V30) for 4K UHD
- Transfer faster with read speeds up to 100MB
- Rated A1, this SanDisk Extreme® microSD card is optimised for apps, delivering faster app launch and performance that provides a better smartphone experience
|
|
Get extreme speed and performance with the SanDisk Extreme microSDHC or microSDXC UHS-I Memory Card. |
 |
DA0339B NEW
|
|
- Built for extreme conditions temperature proof, water proof, shock proof, and x-ray proof
- Delivers 4K Ultra HD and Full HD video recording and playback
- Meets the new UHS Speed Class 3 (U3) and UHS Video Speed Class 30 (V30) for 4K UHD
- Transfer faster with read speeds up to 130MB
- Rated A1, this SanDisk Extreme® microSD card is optimised for apps, delivering faster app launch and performance that provides a better smartphone experience
|
|
Get extreme speed and performance with the SanDisk Extreme microSDHC or microSDXC UHS-I Memory Card. The perfect companion for your smartphone, tablet, or camera, this memory card delivers Full HD video (1080p) recording and playback, and quicker data transfer. Includes SD adaptor. |
 |
F1158A NEW
|
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles brushless DC motor
- Motor Protection: Impedance protected
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 119.7g
- Dimensions: 92 x 92 x 25mm
- Electrical Characteristics
- Rated Voltage: 220-240V AC at 50/60Hz
- Rated Current: 225mA (230mA max)
- Input Power: 4.6W
- Operating Voltage Range: 150-250V AC
- Starting Voltage: 150V AC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2900/3000 RPM ±20%
- Air Flow: 52/54 CFM
- Static Pressure: 0.12/0.14 Inch-H2O
- Noise Level: 31/32dB(A)
- Insulation Resistance: 10MΩ (min) at 500V DC
- Dielectric Strength: 1500V AC for one second
|
|
Connection: Flying Lead
Air Flow: 52CFM
Input Power: 4.6W
Input voltage: 240VAC
Input current: 220mA
Speed: 2900 RPM
Noise Level: 31dBA
Material: Thermoplastic
Size: 92 x 92 x 25mm
Bearing Type: Maglev
Blade Type: Plastic |
 |
F1162 NEW
|
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles, brushless DC motor
- Bearing System: Precision ball bearing system
- Frame/Fan Blade Material: Thermoplastic PBT of UL 94V-0
- Rotation: Counter-clockwise (viewed from the front of the blade)
- Mounting Holes: 8 x 4.3mmØ
- Dimensions: 120 x 120 x 25mm
- Weight: 157g
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 146mA
- Rated Power Consumption: 3.5W
- Operating Voltage Range: 10 ~ 27.6V DC
- Starting Voltage: 10V DC (25°C power on/off)
- Operating Temperature Range: -10°C ~ +70°C
- Storage Temperature Range: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2700 RPM ± 10% at rated voltage
- Air Flow: 93 CFM
- Static Pressure: 0.22 Inch-H2O
- Insulation Class: UL Class 5
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: Applied 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 70,000 hours at 40°C, 60% humidity, 90% CL
- Protections: Automatic Restart, Polarity Protection
|
|
A 24V DC 120mm Sunon Ball Bearing Cooling Fan (#EEC0252B2-0000-A99) with thermoplastic frame. |
 |
F1163 NEW
|
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles, brushless DC motor
- Bearing System: Precision ball bearing system
- Frame/Fan Blade Material: Thermoplastic PBT of UL 94V-0
- Rotation: Counter-clockwise (viewed from the front of the blade)
- Mounting Holes: 8 x 4.3mmØ
- Dimensions: 120 x 120 x 25mm
- Weight: 157g
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 207mA
- Rated Power Consumption: 5.0W
- Operating Voltage Range: 10 ~ 27.6V DC
- Starting Voltage: 10V DC (25°C power on/off)
- Operating Temperature Range: -10°C ~ +70°C
- Storage Temperature Range: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 3100 RPM ± 10% at rated voltage
- Air Flow: 108.2 CFM
- Static Pressure: 0.28 Inch-H2O
- Acoustic Noise: 44.5dB (A)
- Insulation Class: UL Class 5
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: Applied 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 70,000 hours at 40°C, 60% humidity, 90% CL
- Protections: Automatic Restart, Polarity Protection
|
|
A 24V DC 120mm Sunon Ball Bearing Cooling Fan (#EEC0252B1-0000-A99) with thermoplastic frame. |
 |
H1221 NEW
|
|
|
|
Chrome Plated Brass. Tapped to suit metric M3 machine Screws
|
 |
H1238 NEW
|
|
|
|
Chrome Plated Brass. Tapped to suit metric M3 machine Screws
|
 |
H1240 NEW
|
|
|
|
Chrome Plated Brass. Tapped to suit metric M3 machine Screws
Pack of 8pcs. M3 x 20mm. |
 |
H1241 NEW
|
|
|
|
Chrome Plated Brass. Tapped to suit metric M3 machine Screws
Pack of 100pcs. M3 x 20mm. |
 |
H1242 NEW
|
|
|
|
Chrome Plated Brass. Tapped to suit metric M3 machine Screws
Pack of 1000pcs. M3 x 20mm. |
 |
H1243 NEW
|
|
|
|
Chrome Plated Brass. Tapped to suit metric M3 machine Screws
Pack of 8pcs. M3 x 25mm. |
 |
H1244 NEW
|
|
|
|
Chrome Plated Brass. Tapped to suit metric M3 machine Screws
Pack of 100pcs. M3 x 25mm. |
 |
H1245 NEW
|
|
|
|
Chrome Plated Brass. Tapped to suit metric M3 machine Screws
Pack of 1000pcs. M3 x 25mm. |
 |
H1311 NEW
|
|
|
|
Tapped to suit metric M2 machine Screws
Length: 16mm
Pack Qty: 100 |
 |
H1312 NEW
|
|
|
|
Tapped to suit metric M2 machine Screws
Length: 16mm
Pack Qty: 1000 |
 |
H1844A NEW
|
|
- Cable Entry Size: 4-6mmØ
- Stud: 6.3mm
- Max. voltage 300V
|
|
Spade type with double crimp. |
 |
H1847B NEW
|
|
- Wire: 0.75 - 1.0mmØ
- Stud: 2.8mm
- Max. voltage: 300V
|
|
Spade type with double crimp. Pack of 100.
|
|
H1848B NEW
|
|
- Wire: 0.75 - 1.0mmØ
- Stud: 2.8mm
- Max. voltage: 300V
|
|
Spade type with double crimp. Pack of 1000.
|
 |
H1983B NEW
|
|
- Wire: 0.75 - 1.0mmØ
- Stud: 2.8mm
- Max. voltage: 300V
|
|
Spade type with double crimp. Pack of 1000.
|
 |
H3319 NEW
|
|
|
|
M6 eye bolts for ceiling rigging |
 |
H3821 NEW
|
|
- Compression Strength: 750N
- Impact Resistance: 2J
- UV Resistance: Extreme UV (T)
- Minimum Working Temperature: -5°C
- Maximum Working Temperature: +60°C
- Resistance to Bending: Pliable
|
|
7mm inside diameter. Split along its length to allow easy cable entry.
Polypropylene (PP) |
 |
H4200 NEW
|
|
|
|
Ideal for installers using 20mm conduit. |
 |
H4329 NEW
|
|
|
|
A flame retardant conduit entry cable gland designed for use with Redback fire speakers or any situation where a 20mm conduit is used. M18 thread. Depth from panel 20.5mm. |
 |
H5167 NEW
|
|
- Dimensions in mm.
|
|
Pre-punched 1RU rack panel with single set of D series compatible mounting holes. This panel is ideal for test connections in 19" rack systems. Tough black powder coated finish. |
 |
H5392B NEW
|
|
|
|
M6 x 16mm black
Pack Qty: 1000 |
 |
H6110 NEW
|
|
|
|
18T spline shaft. Black |
 |
H8232B NEW
|
|
- Application: Desk mount
- Screen Size: 17" - 32"
- Weight Capacity: 7kg
- VESA Standard: 75x75,100x100
- Pan/Tilt: -90°~+90°
- Rotate: -180°~+180°
- Cable Management: Yes
|
|
This stylish desk mount bracket simply clamps to your desk and supports screen sizes 17"-32" weighing up to 6kg. Includes 2 USB ports. |
 |
J0064 NEW
|
|
- Gear Ratio: 90:1
- Input Voltage: 12V
- No Load
- Speed: 66RPM
- Current: 0.3A
- Rated Load
- Speed: 50RPM
- Current: 1A
- Torque: 17kg-cm
- Stall Load
- Current: 3.8A
- Torque: 35kg-cm
|
|
This gearbox is suitable for a host of model and light industrial applications |
 |
J0070A NEW
|
|
- Step Angle: 1.8Deg
- Temperature Rise: 80DegC max
- Ambient Temperature: -20DegC~+50DegC
- Insulation Resistance: 100 MOhm Min. ,500VDC
- Dielectric Strength: 500VAC for 1minute
- Shaft Radial Play: 0.02Max. (450g-load)
- Shaft Axial Play: 0.08Max. (450g-load)
- Max. radial force: 28N (20mm from the flange)
- Max. axial force: 10N
- Product description: 42 two-phase stepping motor Body length 34mm Static torque 2.2kg.cm
- 5mm shaft diameter with flat wire, length 24mm,
- Wiring method: black green A +, A-. Red blue B +, B-,
- Adapter driver JK0220 (driving voltage DC12V ~ 36V, AC12V ~ 24V, current range 0.3A ~ 2.0A)
|
|
12V 200-step 1.8° 48BYG stepper motor with interface
lead. 2 phase type. 0.23Nm holding torque. 5mmØ
shaft. NEMA17 M3 mounting hole pattern (31mm).
Size: 42x42x34 (25mm shaft). 1m lead. |
 |
J0115 NEW
|
|
- Wheel Diameter: 60mm
- Wheel Thickness: 30.62mm
- Number of Rollers: 9
- Angle: 45°
- Load Capacity: 15kg
- Colour: Yellow and Black
- Material: plastic + silicone rubber
- Motor Shaft Coupling Diameter: 6.71mm
- Motor Shaft Coupling Length: 27.28mm
|
|
A plastic Mecanum wheel for robotics projects requiring omnidirectional movement. |
 |
J0116 NEW
|
|
- Wheel Diameter: 60mm
- Wheel Thickness: 30.62mm
- Number of Rollers: 9
- Angle: 45°
- Load Capacity: 15kg
- Colour: Yellow and Black
- Material: plastic + silicone rubber
- Motor Shaft Coupling Diameter: 6.71mm
- Motor Shaft Coupling Length: 27.28mm
|
|
A plastic Mecanum wheel for robotics projects requiring omnidirectional movement. |
 |
K8600A NEW
|
|
- Simple set up - get printing within 20 minutes.
- Worry free automatic levelling.
- Easy to understand user interface with colour display.
- Auto filament loading and unloading.
- Direct extrusion for most common filament types.
- Ultra stable design with rigid dual Z-axis.
- Compact design fits easily on the workbench.
- Standard 0.4mm nozzle.
- 220 x 220 x 250mm build volume.
|
|
The Ender-3 V3 SE 3D printer is an enhanced and upgraded version of Creality's hugely popular Ender 3 platform. Creality have built in more features and optimisation for an intuitive and efficient FDM 3D printing experience. This Ender 3 has been tailored for those wanting a no compromises approach to features. |
 |
K8601 NEW
|
|
- Double sided PEI coated plate
- Excellent flatness & elasticity
- Strong adhesion
- Durable and long lasting textured plate
|
|
Double sided black textured PEI spring steel magnetic build plate to suit 3D printer models K8600 & K8602 |
 |
K8610 NEW
|
|
|
|
This high performance 3D printer with a more aesthetic, streamlined design, features a brand new nozzle made of brass that can stand up to +300°C printing temperature and is compatible with PLA, ABS, PVA, TPU, PA, PETG and wood. |
 |
K8612 NEW
|
|
- 300°C high temp nozzle.
- 300 x 300 x 400mm build volume.
- HD monitor camera in-built.
- Wi-Fi, Bluetooth and Ethernet connectivity.
- Trapezoidal design for added stability on large volume prints.
- Wide compatability with a variety of filament including PLA, ABS, PVA, TPU, PA, PETG and wood.
- Full-metal dual gear direct extruder.
- CR Touch 16 point automatic levelling sensor or manual levelling as desired.
- LED light bar.
- Spring steel flexible magnetic build plate.
- Silent main board - no noisy stepper motors!
- Filament sensor.
- Pause/resume printing.
- Creality Cloud Printing with iOS/Android app support.
- Supplied mostly assembled to get you printing faster (assembles in under 30 mins).
|
|
The 7 module design of this high performance 3D printer enables assembly within 10 minutes. |
 |
K8615 NEW
|
|
- 7.9" 4K mono LCD
- Self-developed integral light source
- High performance mainboard
- Z-axis with dual linear rails
- 5" HD touch screen
- Air filtration system
- Multiple slicing software
- Supports Creality Cloud APP
- Supports OTA updates
- Compatible with HALOT-BOX Lychee and CHITUBOX
|
|
The large 7.9" 4k mono LCD screen with a resolution of 4320*2560, vividly prints out every detail. With an upgraded 172 x 102 x 160mm build volume, it has a 73% volume increase compared to the 6" LCD and supports both smaller or larger models. |
 |
K8670 NEW
|
|
- Over 26 robots can be assembled as well as custom projects
- Incorporates 2 integrated motors and 2 IR sensors (batteries NOT included) to allow for intelligent, smooth moving robotic projects
- Allows kids to explore grow their imaginations by building and creating projects by themselves
- With the Makerzoid App from App Store and Google Play, kids can assemble the robots easily through the graphic instructions and control the motorized robot to move in all directions with the robotics kit.
- Available through the free app, Scratch 3.0 reduces the difficulty of coding - just to drop a few orders into the "Coding" section then the robot can react on your demand.
- Superbot brings you endless fun in building, playing then battling with their car models together which makes it the new pop in any kids' theme party.
- The set is packed in a clear storage box to help children develop a good habit of packing and collecting their own toys.
|
|
A 400pc set allowing kids to build up to 26 different projects, and create designs of their own. Includes control unit and intelligent sensors (2) that allow building of line tracking, obstacle avoiding and following robot designs. Blocks are compatible with other major brands. Fully programmable using Scratch. Includes storage box. |
 |
K8671 NEW
|
|
- Build more than 72 robots from simple to complex, which contains a lot of robot knowledge such as machinery, gears, structure, transmission, etc.
- Enhance children's hand-on ability, DIY and logical thinking ability
- Different combinations of the motor and sensors greatly stimulate kids' to think scientifically.
- The control module of this educational toy also known as the "Intelligent Motor", contains 2 operation modes:"Electrical Mode" and "Intelligent Mode". The electric part makes it an excellent and amusing toy while the intelligent part is what specifically makes it SMART and DIFFERENT. (Batteries NOT included).
- Both the blocks and motor are compatible with almost all building sets. Spectacularly, with the great compatibility of the Intelligent Motor, it can power up motionless robots and make them move!
- Allows kids to explore grow their imaginations by building and creating projects by themselves
- With the Makerzoid App from App Store and Google Play, kids can assemble the robots easily through the graphic instructions and control the motorized robot to move in all directions with the robotics kit.
- Available through the free app, Scratch 3.0 reduces the difficulty of coding - just to drop a few orders into the "Coding" section then the robot can react on your demand.
- This set is packed in a storage box to help children develop a good habit of packing and collecting their own toys.
|
|
This 300pc set contains the parts for 72 different project designs which can be built using Makerzoids 3D app tutorials. |
 |
K8672 NEW
|
|
- Build more than 100 robots from simple to complex, which contains a lot of robot knowledge such as machinery, gears, structure, transmission, etc.
- Both Children and parents will enjoy the fun of building a robot and making a programming for it.
- Helps develop children's mind, DIY and logical thinking ability.
- Set is equipped with 23 robotics courses for kids to learn how to build, control and code at home while playing with this toy set.
- Incorporates 2 integrated motors and 2 IR sensors (batteries NOT included) to allow for intelligent, smooth moving robotic projects
- Allows kids to explore grow their imaginations by building and creating projects by themselves
- With the Makerzoid App from App Store and Google Play, kids can assemble the robots easily through the graphic instructions and control the motorized robot to move in all directions with the robotics kit.
- Available through the free app, Scratch 3.0 reduces the difficulty of coding - just to drop a few orders into the "Coding" section then the robot can react on your demand.
- The set is packed in a big storage box to help children develop a good habit of packing and collecting their own toys. And the sorting plate will be less time-consuming because kids could organise the building blocks based on the colour and size.
|
|
The Robot Master sets supports the building of up to 200 different robotic projects from simple to complex, allowing kids to progress their STEM skills up with staged lessons. |
 |
K8673 NEW
|
|
- Build more than 200 robots from simple to complex, which contains a lot of robot knowledge such as machinery, gears, structure, transmission, etc.
- Both Children and parents will enjoy the fun of building a robot and making a programming for it.
- Helps develop children's mind, DIY and logical thinking ability.
- Set is equipped with 47 robotics courses for kids to learn how to build, control and code at home while playing with this toy set.
- Incorporates 2 integrated motors and 2 IR sensors (batteries NOT included) to allow for intelligent, smooth moving robotic projects
- Allows kids to explore grow their imaginations by building and creating projects by themselves
- With the Makerzoid App from App Store and Google Play, kids can assemble the robots easily through the graphic instructions and control the motorized robot to move in all directions with the robotics kit.
- Available through the free app, Scratch 3.0 reduces the difficulty of coding - just to drop a few orders into the "Coding" section then the robot can react on your demand.
- The set is packed in a big storage box to help children develop a good habit of packing and collecting their own toys. And the sorting plate will be less time-consuming because kids could organize the building blocks based on the colour and size.
|
|
Build up to 200 different projects or create your own! Great for inspiring kids to invent and design with staged learning from the basics up to advanced Scratch programming. Each set contains hundreds of blocks, plus multifunction sensors, programmable motor and host controller. Compatible with big brand name blocks.
|
 |
K9641 NEW
|
|
|
|
An assortment of straight pin boxed PCB connectors and matching plugs in 2, 3, 4 and 5 way varieties (10 of each plug and socket). Plus crimp pins to suit plug housings. 150pcs total. |
 |
K9645 NEW
|
|
|
|
An assortment of right 1.25mm pitch angle boxed PCB connectors and matching plugs in 2, 3, 4 and 5 way varieties. |
 |
L2011A NEW
|
|
- Designed and tested for digital/analogue reception
- Heavy Duty construction on all components
- Elevation / Tilt bracket included
- Can be vertically or horizontally mounted
- UV stabilised plastics
- Band 4 and Band 5 UHF Antenna
|
|
A compact multi element UHF band 4/5 antenna for inner metro area use. Provides a maximum gain of 9dB. Fitted with F-Type connection for easy installation. Durable all metal design. |
 |
L2012A NEW
|
|
- Designed for prime capital cities for VHF and UHF channels 6-12 and 28-38
- Boomlock technology used to secure elements to balun
- New mounting clamp for quicker and safer installation
- Matched diplexer-balun rejects out-of-band interference for minimal picture break-up
- Ultrasonically sealed balun prevents water ingress for maximum reliability
- Strong mechanical construction with a lightweight and compact design
|
|
The Tru-Band antenna range is a revolutionary new combination antenna for capital cities that have been designed for the digital-only TV environment in Australia. |
 |
L2015A NEW
|
|
- Precise antenna specifications within the desired UHF frequency band
- Boomlock™ manufacturing technology used to secure elements
- New mounting clamp for easier and safer installation
- Ultrasonically sealed balun housing for maximum reliability
- PCB balun for true matching and lowest insertion loss
- 4G filter included
- Strong and lightweight aluminium construction
- Designed and manufactured in Australia
|
|
The Hills Antenna Tru-Max 18 4G antenna is a superior phased array antenna used for regional UHF areas. |
 |
L2017D NEW
|
|
- F-type connectors for better shielding and more reliable connections
- Heavy duty construction for extra strength
- Rectangular galvanised steel boom construction provides element alignment
- Powder coated boom for longer life and improved aesthetics
- UV stable plastics for durability under harsh Australian conditions
- Suitable for reception of horizontal or vertical polarisation
|
|
The Hills Antenna DY series antennas combine a F-Type connection for superior screening with wider bandwidth for digital television reception. The DY-6 antenna is a 6 element outer prime VHF antenna, ideal for areas just outside of capital cities. |
 |
LX2081A NEW
|
|
- Frequency Range 174~694 MHz (Channels 6 to 51)
- 44dB Maximum Gain
- 10dB Mid-Stage Gain Control
- Single RF Input
- Local or Remote Powering Options
- F-Type Connector for Power Input
- Adjustable Slope Control of 0dB to 10dB
- -30dB Test Point
- Ability to send power out via the RF Input
- High Output Figure: 118dB IMR3 (DIN45004B)
- Connectors: F-Type
- Power Consumption: 300mA
- Operating Voltage: 18V DC
- Operating Temperature: -10ºC to 50ºC
|
|
Kingrays DA44 distribution amplifier has been designed to suit the digital television environment of today and well into the future. |
 |
M2152C NEW
|
|
- Primary voltage: 240V AC
- Total VA rating: 12.5VA
- Insulation: Class E (120°C)
- Magnetising current: <45mA
- Temperature rise: <65°C
- Regulation: ˜11%
- Recommended AC fuse: 250mA
- Weight: ˜561g
- Primary connection: 200mm fly leads
- Secondary connection: 490mm fly leads
- AS/NZS 61558.2.6 approval: Q042028
- AS3108 approval: CS/813/Q
- Secondary Voltages Available: Voltage :12.5V / Current : 1A
|
|
Powertran EI-Core 240V AC mains transformer with 1A centre tapped secondary configuration. 6.25V and 12.5V secondary voltages available at 1A current output. Primary and secondaries fitted with 200mm flyleads. Fully electrical authority approved for AS/NZS 61558.2.6. |
 |
M2155C NEW
|
|
- Primary voltage: 240V AC
- Total VA rating: 15VA
- Insulation: Class E (120°C)
- Magnetising current: <60mA
- Temperature rise: <60°C
- Regulation: ˜10%
- Recommended primary AC fuse: 250mA
- Weight: ˜555g
- Primary connection: 200mm fly leads
- Secondary connection: Solder tags
|
|
Primary fitted with 200mm fly leads. Secondary taps have solder tags. |
 |
M2156C NEW
|
|
- Primary voltage: 240V AC
- Total VA rating: 30VA
- Insulation: Class E (120°C)
- Magnetising current: <65mA
- Temperature rise: <60°C
- Regulation: ˜10%
- Recommended primary AC fuse: 500mA
- Weight: ˜1kg
- Primary connection: 200mm fly leads
- Secondary connection: Solder tags
|
|
Powertran EI-Core 240V AC mains transformer with 2A multi tapped secondary configuration. 0V, 6V, 9V, 12V and 15V secondaries are available at 2A current output. Primary is fitted with 200mm flyleads. Secondary taps have solder tags. Fully electrical authority approved for AS/NZS 61558.2.6. |
 |
M2158C NEW
|
|
- Primary voltage: 240V AC
- Total VA rating: 72VA
- Insulation: Class E (120°C)
- Magnetising current: <85mA
- Temperature rise: <65°C
- Regulation: ˜10%
- Recommended primary AC fuse: 500mA
- Weight: ˜1.4kg
- Primary connection: 200mm fly leads
- Secondary connection: 200mm fly leads
|
|
Powertran EI-Core 240V AC mains transformer with 3A single tap secondary configuration. 24V secondary voltage available at 3A current output. Primary and secondaries fitted with 200mm flyleads. Fully electrical authority approved for AS/NZS 61558.2.6. |
 |
M2165C NEW
|
|
- Primary voltage: 240V AC
- Total VA rating: 60VA
- Insulation: Class E (120°C)
- Magnetising current: <85mA
- Temperature rise: <65°C
- Regulation: ˜10%
- Recommended primary AC fuse: 500mA
- Weight: ˜1.4kg
- Primary connection: 200mm fly leads
- Secondary connection: Solder tags
|
|
Powertran EI-Core 240V AC mains transformer with 6.6A dual multi tapped secondary configuration. Two sets of 0V, 9V and 12V secondaries are available at a maximum current of 6.6A (max current when 9V secondaries connected in parallel) . Primary is fitted with 200mm flyleads. Secondary taps have solder tags. Fully electrical authority approved for A |
 |
M2170C NEW
|
|
- Primary Voltage: 240V AC
- Total VA Rating: 100VA
- Insulation: Class E (120°C)
- Magnetising Current: <85mA
- Temperature Rise: <70°C
- Regulation: ˜14%
- Recommended primary AC Fuse: 500mA
- Weight: ˜1.6kg
- Primary connection: 200mm fly leads
- Secondary connection: Solder tags
- AS/NZS 61558.2.6 approval: Q042028
- AS3108 approval: CS/813/Q
|
|
Powertran EI-Core 240V AC mains transformer with 6A dual multi tapped secondary configuration. Two sets of 0V, 12V and 15V secondaries are available at a maximum current of 6A (max current when secondaries connected in parallel) . Primary is fitted with 200mm flyleads. Secondary taps have solder tags. Fully electrical authority approved for AS/NZS |
 |
M2190C NEW
|
|
- Primary voltage: 240V AC
- Total VA rating: 120VA
- Insulation: Class E (120°C)
- Magnetising current: <85mA
- Temperature rise: <65°C
- Regulation: ≈10%
- Recommended primary AC fuse: 500mA
- Weight: ≈1.4kg
- Primary connection: 200mm fly leads
- Secondary connection: 200mm fly leads
|
|
Powertran EI-Core 240V AC mains transformer with 5A single tap secondary configuration. |
 |
M2851C NEW
|
|
- Primary voltage: 240V AC
- Total VA rating: 1.89VA
- Insulation: Class E (120°C)
- Magnetising current: <30mA
- Temperature rise: <65°C
- Regulation: ˜7.5%
- AC fuse: Not required (fitted internally)
- Weight: ˜145g
- Primary connection: 200mm fly leads
- Secondary connection: 200mm fly leads
|
|
Primary and secondary fitted with 200mm fly leads. |
 |
M2852C NEW
|
|
- Primary voltage: 240V AC
- Total VA rating: 3.78VA
- Insulation: Class E (120°C)
- Magnetising current: <40mA
- Temperature rise: <65°C
- Regulation: ˜12%
- AC fuse: Not required (fitted internally)
- Weight: ˜235g
- Primary connection: 200mm fly leads
- Secondary connection: 200mm fly leads
- Secondary Voltages Available: Voltage : 6.3V, 12.6V / Current : 300mA
|
|
Primary and secondary fitted with 200mm fly leads. |
 |
M2853C NEW
|
|
- Primary voltage: 240V AC
- Total VA rating: 6.3VA
- Insulation: Class E (120°C)
- Magnetising current: <45mA
- Temperature rise: <65°C
- Regulation: ˜13%
- Recommended AC fuse: 100mA
- Weight: ˜315g
- Primary connection: 200mm fly leads
- Secondary connection: 200mm fly leads
- Secondary Voltages Available: Voltage : 6.3V, 12.6V / Current : 300mA
|
|
Primary and secondary fitted with 200mm fly leads. |
 |
M2854C NEW
|
|
- Primary voltage: 240V AC
- Total VA rating: 3.6VA
- Insulation: Class E (120°C)
- Magnetising current: <40mA
- Temperature rise: <65°C
- Regulation: ˜12%
- AC fuse: Not required (fitted internally)
- Weight: ˜235g
- Primary connection: 200mm fly leads
- Secondary connection: 200mm fly leads
- AS/NZS 61558.2.6 approval: Q042028
- AS3108 approval: CS/813/Q
- Secondary Voltages Available: Voltage : 12V, 24 / Current : 150mA
|
|
Primary and secondary fitted with 200mm fly leads. |
 |
M4315A NEW
|
|
- Sec. V: 7.5+7.5
- Sec. Parallel: 1.3A
- Sec. Series: 0.66A
- Primary voltage: 2 x 120V AC
- Total VA rating: 10VA
- Insulation: Class A (105°C)
- Magnetising current: <20mA
- Temperature rise: <65°C
- Recommended AC Fuse: 100mA
- Regulation: ˜20%
- Weight: ˜210g
- PCB hole size: 2mm
- AS/NZS 61558.2.6 approval: Q99396
- Note: Must be used with a standard 100mA external AC fuse
|
|
Toroidal transformers provide a higher output compared to traditional E-I transformers of a similar physical size. They have substantially reduced radiated hum and electrical noise, generate less heat and have much better regulation making them ideal for |
 |
M6672C NEW
|
|
- Primary voltage: 240V AC
- Total VA rating: 30VA
- Insulation: Class E (120°C)
- Magnetising current: <80mA
- Temperature rise: <65°C
- Regulation: ˜8%
- Recommended primary AC fuse: 500mA
- Weight: ˜1kg
- Primary connection: 200mm fly leads
- Secondary connection: Solder tags
- AS/NZS 61558.2.6 approval: Q042029
- AS3108 approval: CS/814/Q
|
|
Primary fitted with 200mm fly leads. Secondary taps have solder tags. |
 |
M8025 NEW
|
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Multi-function LCD readout
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
M8027 NEW
|
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Multi-function LCD readout
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
M8066 NEW
|
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Multi-function LCD readout
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
M8196 NEW
|
|
- 83Wh internal lithium-ion battery (22.5Ah @ 3.7V)
- Light weight yet sturdy design with carry handle
- Micro USB recharge port
- USB C PD 18W output
- Dual QC3.0 18W USB A outputs
- 5W max hand crank recharging
- Torch with SOS mode
- Three brightness lantern/reading lamp
- Recharge time 4.5hrs (QC3.0).
- Battery capacity readout
|
|
Great for camping and hiking getaways, this compact portable charging solution keeps your devices powered up while also providing a handy lamp and torch. |
 |
M8534B NEW
|
|
- Short circuit and reverse polarity protected
- Suitable for use with lead acid, LiFePO4, AGM/EFB batteries.
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 6A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
 |
M8536B NEW
|
|
- Short circuit and reverse polarity protected
- Suitable for use with lead acid, LiFePO4, AGM/EFB batteries.
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 10A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
 |
M8561A NEW
|
|
- 88% efficient switchmode power supply design.
- Protections: overload / over voltage / short circuit / under voltage / reverse polarity.
- 5A max connected load. 650mA battery charging circuit.
- LEDs provide quick status indication.
- Fits a standard size 7.2Ah 12V SLA battery.
- Patented design with simple wall mount installation.
- 100% full load burn-in tested.
- 2 year warranty.
|
|
A complete 12V DC power supply and UPS battery backup in one compact enclosure. When operating from 240V, it automatically charges the internal battery (available separately) and powers the connected load (max 5A). |
 |
M8623C NEW
|
|
- Standard USB charging and QC 3.0 charging ports.
- Easy to use - just plug in and turn on your ignition to charge.
- Great for keeping your devices charging whilst in the car.
- Sleek design with light up ring so you can find it at night.
- Battery voltage meter in-built.
|
|
This dual charger allows you to power up to two devices in your car. Max combined current output is 5.5A. |
 |
M8625A NEW
|
|
- Input: 12-24V DC
- Output: 5.0V DC, 4.8A
|
|
Provides two 2.4A USB charging outlets. Suitable for charging phones, tablets, drones, cameras and other devices. |
 |
M8657 NEW
|
|
- Length: 300mm
- Cable type: 2 x 8AWG cable
- Input Connection: Bare ends
- Output Connection: Plug
- Output Type: Anderson 50A 2 Pole
- DC current rating: 50A
- Current Draw: 50A
|
|
A handy 50A rated bare end cable fitted with an SB50 Anderson style plug for connection to high current DC circuits. |
 |
M8658 NEW
|
|
- Length: 300mm
- Cable type: 2 x 8AWG
- Input Connection: Anderson 50A 2 Pole
- Output Connection: Plug
- Output Type: Anderson 50A 2 Pole
- Fuse: In-line 50A Maxi blade fuse
- Output Quantity: 2pc
- AC current rating: 50A
- DC current rating: 50A
- Current Draw: 50A
|
|
This Anderson style ring terminal adaptor cable allows you to permanently connect an Anderson style connection cable to your vehicles battery. |
 |
M8659 NEW
|
|
- Length: 2m
- Cable type: 16AWG twin core
- Input Type: Anderson 50A 2 Pole
- Output Type: Cigarette Lighter 15A
|
|
2m Car Accessory Socket To Anderson Style Cable
|
 |
M8861C NEW
|
|
- Input: 100-240V AC @ 50/60Hz
- Output: 5V 3A, 9V 2A, 12V 1.5A. 18W output
- Connection: USB type A.%C2%A0
|
|
This single output QC3.0 (Quick Charge ) 3A USB wall charger is an ideal choice for anyone that has one device that needs to be charged. |
 |
M8865 NEW
|
|
- Power delivery passthrough up to 100W.
- Portable and lightweight design.
- 5 way USB type C charging up to 20W per port (dependant on connected power supply).
- Weighs less than 100 grams!
|
|
Ideal for the workbench, the office or even at home. This compact and portable 5 port USB C extension charger hub provides multiple ports for charging devices up to a total output of 100W. |
 |
M8969 NEW
|
|
- MEPS efficiency level V
- Australian Standards Compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
24V DC 2A switch mode plug pack. |
 |
M8971A NEW
|
|
- MEPS efficiency level: V
- Australian standards compliant
- Suitable for a range of electronic devices
|
|
Super compact regulated power supply. 100V - 240V ac input. Energy authority approved and MEPS approved. Supplied with a fixed 2.1mm dc jack. |
 |
M8980C NEW
|
|
- Voltage Input: 100-240V AC 60/50Hz
- Voltage Output:
- 3V, 4.5V 5V @ 2A
- 6V, 7.5V @ 1.5A
- 9V @ 1.3A
- 12V DC @ 1A
- Efficiency Level: V
- Dimensions: 43W x 76H x 44D mm
|
|
A slim line multi-voltage plug pack with the adjustment switch on the side of the unit that faces the wall when installed. This prevents accidental change of output voltage which may cause damage to a connected appliance. 2A max output. |
 |
M8994A NEW
|
|
- Slimline and lightweight case design reduces the need to carry bulky chargers around.
- 112W power delivery 2.0 output for modern USB C type devices.
- Auxiliary USB type A charging output (2.4A max).
- Compatible with a wide range of brands and models which utilise USB C type charging.
- Wide AC input range (100-240V AC) allows overseas use when paired with standard travel adaptors.
- Includes power cable.
|
|
This slim & lightweight 112W USB-C power delivery (PD) charger offers fast recharging for MacBooks, Nintendo Switch and other type “C” devices. |
