|
Description |
Downloads |
Specs |
Ordering |
|
 |
H5193 NEW
|
|
|
|
A pair of rack ears suitable for mounting two Redback A42XX zone PA amplifiers into a 1RU rack space. Includes 2 rack ears and 8 mounting screws. |
 |
A4867 NEW
|
|
- Decodes balanced line level or stereo RCA inputs for streaming across an IP network (when used with A4866).
- Configurable IP addresses for each unit.
- Allows for multiple encoders and decoders on a network.
- Can be used with pre-existing UTP cabling - ideal for multi building facilities utilising local zone amplifiers for PA.
- Web portal set up.
- Local level adjustment.
- Can be powered via PoE or local 12V DC plugpack.
|
|
The Merlaud IP Communicator balun system provides an easy way to send balanced audio line signals over network IP systems. |
 |
C0448SS NEW
|
|
|
|
Dual 3 pin XLR microphone connectors mounted horizontally on a brushed stainless steel wall plate. “One-Shot” version with screw terminal connections for quick and easy connection on site. |
 |
A4866 NEW
|
|
- Encodes balanced line level or stereo RCA inputs for streaming across an IP network.
- Configurable IP addresses for each unit.
- Allows for multiple encoders and decoders on a network.
- Can be used with pre-existing UTP cabling - ideal for multi building facilities utilising local zone amplifiers for PA.
- Web portal set up.
- Local level adjustment.
- Can be powered via PoE or local 12V DC plugpack.
|
|
The Merlaud IP Communicator balun system provides an easy way to send balanced audio line signals over network IP systems. |
 |
C0446SS NEW
|
|
|
|
3 pin XLR microphone connector mounted horizontally on a brushed stainless steel wall plate. “One-Shot” version with screw terminal connections for quick and easy connection on site. |
 |
A4574B NEW
|
|
- Level controls for alert/evac, bell and voice over
- Front panel alert/evac/bell and cancel switches
- All tones MP3 based
- Alert/Evac Emergency tones can be configured for momentary or continuous operation
- 1U half rack cabinet
- Alert and Evac Tones conform to AS 1670.4 (Library included on Micro SD card)
- Compatible with fire indicator boards & break glass alarms
- Remote operation of alert , evac, bell tones & cancel.
- Local operation of alert, evac and bell
- MP3 based Alert and Evacuation Voice over message facility
- Bell chime facility
- Switched 24V DC outputs for override relays or strobes (outputs limited to 120mA)
- On-board timer for remote alert activation adjustable from 30secs to 7.5min in 30 second increments.
- Switches from alert to evac after preset time.
- Auxiliary level output
- 10 year warranty
- Australian designed and manufactured
|
|
This unit has provision for playback of Alert, Evacuation and chime tones as well as an alert and/or emergency message. When connected to a paging system amplifier, building occupants can be alerted and/or evacuated in the event of an emergency e.g.: fire, gas leak, bomb scare, earthquake. |
 |
C0359A NEW
|
|
- USB powered. Easy to power anywhere.
- Provides 48V phantom power to condenser microphones.
- Balanced XLR input and output.
- Additional 3.5mm stereo mixed output.
- Rugged, compact metal enclosure.
- Power and input status LED indicators.
- Ideal for desktop studios, field recording, and content creation.
|
|
A compact and convenient desktop phantom power solution. USB-powered for maximum portability and versatility. Designed for use with condenser microphones requiring 48V phantom power, this unit features balanced XLR input and output connections for seamless integration with professional audio equipment |
 |
C0463 NEW
|
|
 Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
This dual 3 pin XLR wallplate has been desinged for DJ/band inputs at function centres and venues. |
 |
H5158 NEW
|
|
|
|
A rack mount bracket designed to accommodate four independent Merlaud zone decoders (A4872) in a 1RU space. |
 |
H5159 NEW
|
|
|
|
A blanking panel to fill unused spaces in the H5158 Merlaud zone decoder rack panel. |
 |
C8825 NEW
|
|
- The dual-channel home theater karaoke wireless microphone system has Ultra-High Frequency (UHF) for interference free performance.
- HDMI, Optical and 1/8” (3.5mm) input and output for instant Karaoke fun.
- Compatible with an array of devices including TV, Smart TV, Blue-Ray player, notebook, iPad, tablet, home theater, receiver, speaker, etc.
- The portable receiver and audio mixer supports up to two wireless microphones (included) and two wired microphones (not included).
- Adjustable DSP sound effects Reverb, Echo, Bass, Treble and Vocal Cut Control for more Karaoke fun.
- Up to 30m line-of-sight operation range. Perfect for Karaoke, DJ music and house parties.
|
|
UHF dual-channel wireless mic system with DSP effects, multiple inputs, and 30 m range—ideal for karaoke, DJs, and home entertainment. |
 |
A1717B NEW
|
|
- Electrical
- Power supply: 24V DC to 30V DC 300mA (idle/maximum current draw 150mA) tip positive
- Output line: Stereo RCA 500mV nominal
- MP3 sample rate: 44kHz
- SD card size: 256MB to 16GB
- Trigger activation: Closing contact
- Switched output: 24-30VDC out (supply voltage dependent), limited to 120mA current draw
- MP3 Info
- MP3 File Format: Minimum 128kbps, 44.1kHz, 32bit, VBR or CBR, Stereo
- Length/size: Limited by card size (1600mins @ 128kbps, 44kHz on supplied 16GB)
- Bit rate: All standard MP3 rates (128kbps recommended)
- Sample rate: All standard MP3 rates (44kHz recommended)
- Channels: Stereo or mono
|
|
The A 1717B is an MP3 based message player housed in a compact flange mount aluminium enclosure and offers playback of four MP3 tracks. |
 |
A4423 NEW
|
|
- 1 microphone/ 4 line inputs (mono mixed internally)
- Front 3.5mm music input (overrides rear input 4 input)
- Bluetooth audio connection (overrides input 4 front and rear inputs)
- 2 outputs via XLR/RCA 1V balanced
- Level controls for all inputs
- Separate bass and treble controls on all inputs
- Adjustable input sensitivity on all RCA line inputs
- Phantom power selection on Mic inputs (12V DC)
- Route signals to each output or both outputs
- 24V DC input
- 24V DC battery back up terminals
- 1RU 19” rack mount case
- 10 Year Warranty
- Australian designed & assembled
|
|
The Redback® mixer delivers a flexible and installer-friendly solution with one microphone/line input and three additional line inputs (all internally mixed to mono), plus a front-panel 3.5mm music input and integrated Bluetooth® receiver.
|
 |
A4958 NEW
|
|
- Input Level Sensitivity: 100mV/1V
- Output Level Sensitivity: 100mV/1V
- Input Connectors: 3 pin XLR balanced, 2 x RCA
- Output Connectors: 3 pin XLR balanced, 2 x RCA
- Dimensions: 40W x 83D x 50H
- Weight: 0.2 kg
|
|
The Redback A 4958 is a compact, professional-grade pre-amplifier designed for versatility and reliability. It accepts both XLR and RCA inputs and provides a volume-adjustable XLR or RCA output, with RCA signals internally mixed to mono. |
 |
A4933 NEW
|
|
- Frequency Response:
- Mic input: 140Hz - 20kHz
- Aux input: 140Hz - 20kHz
- Music input: 140Hz - 20kHz
- Input Sensitivity:
- Mic input: 1mV -13mV balanced
- Aux input: 40mV - 800mV balanced
- Music input: 40mV - 800mV balanced
- Connectors:
- Mic Input: 3 pin XLR
- Aux Input: 2 x RCA
- Music Input: 3.5mm Stereo Socket
- General:
- Output: RJ45 8P8C
- Data transmission: Cat5e/6 cabling (max 200 metres)
- Bluetooth Version: 5.1
- Bluetooth Range: 30m average (clear line of sight)
- Weight: ≈0.11kg
- Power: Powered over Cat5e/6 cable
|
|
This Microphone/Line Pre Amplifier Wallplate accepts either a microphone level, line level, music or bluetooth input and converts the signal to a balanced high level output. |
 |
A4505D NEW
|
|
- MP3 audio format for Bell, Prebell and Music timing outputs
- MP3 audio format Emergency Tones conform to AS 1670.4 (supplied)
- Random play of MP3 files for Prebell and Music triggers
- Easy PC based timing event setup
- Local push button operation of Lockdown, Fire and Bell
- Remote triggering of Lockdown, Fire and Bell
- MP3 audio format Voice over message (Available in the Lockdown and the Fire cycle)
- Switched 24VDC output for Bell, Lockdown or Fire mode
- Pluggable screw terminal connections
- Auxiliary level output
- Battery backup of current time
- 24V DC operation
- Standard 1U 19” rack mount case
- Suitable for any amplifier with an auxiliary input
- 10 Year Warranty
- Australian Designed and Manufactured
|
|
A timed audio announcement, lockdown and fire alarm controller all housed in a convenient 1RU rack mount chassis. A total of 50 event switching times are available through the timing functions. |
 |
A4500D NEW
|
|
- MP3 audio format files required for Bell, Prebell and Music timing outputs
- Emergency Tones conform to AS 1670.4 (supplied)
- Random play of audio files for Prebell and Music triggers
- Easy PC based timing event setup
- Local push button operation of Alert, Evac, Bell and Isolate
- Remote triggering of Alert, Evac and Bell functions via closing contacts
- Remote triggering of Alert, Evac, Bell and Isolate functions via optional wall plates
- Emergency Paging (Optional via Redback® A 4660A)
- Voice over message (In Evacuation cycle)
- Switched 24VDC output for Bell, Alert or Evac mode
- Pluggable screw terminal connections
- Auxiliary level output
- Battery backup of current time
- 24V DC operation
- Standard 1U 19” rack mount case
- Suitable for any amplifier with an auxiliary input
- 10 Year Warranty
- Australian Designed and Manufactured
|
|
A weekly timer and Evacuation controller all housed in a convenient 1RU rack mount chassis. A total of 50 “event” switching times are available through the timing functions. Each event can be set to turn on any single day of the week or on multiple days, from 1 sec up to 24 hours. |
 |
C7235 NEW
|
|
- Pairs with Okayo C7230 portable PA system.
- High-quality audio with electret condenser microphone.
- Low-latency performance under 17 ms for real-time sound.
- Reliable wireless transmission using 1.9 GHz DECT spectrum.
- Extended range of 50–70m (line-of-sight) for flexible movement.
- Long-lasting Li-ion polymer battery provides over 12 hours of operation per charge.
- Lightweight, compact design (25 × 35 × 98 mm, 90g) for comfortable wear.
- Multiple microphone options - compatible with 3.5mm lapel and headset styles.
- Perfect for diverse applications such as presentations, tours, education, worship, and events
|
COMING SOONThis item is arriving soon. |
This Okayo C7235 is a compact, versatile bodypack/pendant microphone that operates on 1.9 GHz DECT technology, ensuring interference-free, high-fidelity wireless audio transmission. It can used as a wireless transmitter for the Okayo C7230 portable PA system. |
 |
C7230 NEW
|
|
- Ultra lightweight design with internal rechargeable LiFePO4 battery.
- Class-D high performance amplifier.
- 8" woofer, plus 2" tweeter - provides far higher speech clarity than live sound speakers.
- Weighs just 7kg for the ultimate portability and ease of set up.
- Speaker extension via wired extension speaker or Bluetooth TWS.
- In-built USB/SD card media player for music and recorded message playback.
- Voice priority music override switch.
- Dual wired microphone inputs.
- Supports up to 4 wireless microphones via 1.9GHz DECT.
- Up to 70m wireless range.
- Adjustable echo, bass, treble, plus individual level controls for all inputs.
- Auxiliary USB charging ports for microphones.
|
COMING SOONThis item is arriving soon. |
The Okayo C7230 portable PA system delivers powerful, crystal-clear sound, making it a perfect speaker system for ceremonies, weddings, camps, group activities, churches, and more. Features a Class D amplifier, 2" tweeter, and 8" speaker. |
 |
A4280A NEW
|
|
- Multi-stage thermally cued fan cooling
- 2U 19” rack mount (with optional A 4376)
- Tape record out terminals
- Provision for connection to Redback A4660 touchscreen paging console
- MP3 based Alert/Evac tones with MP3 voice over message for emergency tones (built in)
- 3 mic input and 4 auxiliary inputs
- Phantom powering available on all inputs
- Adjustable vox muting on inputs 1 & 2.
- Bass and treble tone controls
- Terminals for 100V line output
- 240V AC or 24V DC power operation
- Thermal & fuse overload protection
- Built in short circuit protection
- Australian designed & assembled
|
|
This Redback 4 Zone 250 Watt 100V Public Address Mixer Amplifier is similar in functionality to our A4387A amplifier, with the addition of four 100V line output zones. During normal use, you are able to select via the front panel switches, any zone on or off to control BGM programming. |
 |
A4455 NEW
|
|
- 4 inputs, 8 outputs
- Optional Touchscreen master plate or paging console can control & set up all zones
- Optional Touchscreen zone plate
- Zone paging via optional A 4660A Paging Console
- Emergency Tone activation via optional A 4660A Paging Console, wall plates or rear triggers
- Emergency tones available in Evacuation or Lockdown modes
- Bluetooth input via wall plates (local zone only)
- Optional Priority/Mute input
- System cabling via Cat5e UTP.
- Suits all size power amps
- 24V DC operation
|
COMING SOONThis item is arriving soon. |
This Redback 4x8 audio switcher is designed to distribute four audio input sources to eight output zones. Allows seamless transmission of audio between rooms with ease. |
 |
C7231 NEW
|
|
- Output power: RMS 60W / MAX 80W
- Speaker: 2" tweeter / 8" full range
- Weight: 3kg
- Dimensions: 292W x 473H x 230Dmm
|
COMING SOONThis item is arriving soon. |
The Okayo C7231 portable PA extension speaker plugs into the C7230 and provides additional sound coverage for large gatherings. Delivers powerful, crystal-clear sound, making it a perfect speaker system for ceremonies, weddings, camps, group activities, churches, and more. |
