|
Description |
Downloads |
Specs |
Ordering |
|
|
D0909 |
|
- Mode: PSCEBB60CH
- Suits: PSCE6000 / PSCE10K
- Weight: 190 kg
- Dimensions: 592 × 250 × 826 mm
- Number of Batteries: 60
- Charger current: 4A
|
|
Add run time to your PowerShield Centurion UPS system with the PSCEBB60CH. Extends the standard run time for PSCE6000 at 50% load from 28 minutes to 232 minutes. |
|
D0908 |
|
- Mode: PSCEBB18CH
- Suits: PSCE2000 / PSCE3000
- Weight: 62 kg
- Dimensions: 534 × 190 × 335 mm
- Number of Batteries: 18
- Charger current: 4A
|
|
Add run time to your PowerShield Centurion UPS system with the PSCEBB18CH. Extends the standard run time for PSCE2000 at 50% load from 26 minutes to 220 minutes. |
|
D0907 |
|
- Mode: PSCEBB12
- Suits: PSCE2000 / PSCE3000
- Weight: 40 kg
- Dimensions: 425 × 190 × 335 mm
- Number of Batteries: 12
|
|
Add run time to your PowerShield Centurion UPS system with the PSCEBB12. Extends the standard run time at 50% load from 26 minutes to 104 minutes. |
|
D0905
|
|
- Mode: PSCEBB6
- Suits: PSCE1000
- Weight: 22 kg
- Dimensions: 472 × 230 × 355 mm
- Number of Batteries: 6
|
|
Add run time to your PowerShield Centurion UPS system with the PSCEBB6. Extends the standard run time at 50% load from 26 minutes to 104 minutes. |
|
DA0895 |
|
- Powershield P/No: PSCE6000
- Line interactive (Auto voltage reg.): ±1%
- True online double conversion: Yes
- Battery backup capacity: 6000VA
- Input voltage (nominal): 110-300V AC
- Mains connections: Hard wired mains outlets, 10A/IEC C13 x 2.
- Communication: RS-232, USB
- Frequency: 50Hz
- Dimensions: 592 x 250 x 576
- Weight: 78kg
|
|
For critical loads the PowerShield PSCE10K Centurion offers the best protection against all potential power disruptions and anomalies. This UPS takes the mains power in AC, converts it to DC and then converts the DC back to AC to feed your equipment. |
|
DA0894 |
|
- Powershield P/No: PSCE6000
- Line interactive (Auto voltage reg.): ±1%
- True online double conversion: Yes
- Battery backup capacity: 6000VA
- Input voltage (nominal): 110-300V AC
- Mains connections: Hard wired mains outlets, 10A/IEC C13 x 2.
- Communication: RS-232, USB
- Frequency: 50Hz
- Dimensions: 592 x 250 x 576
- Weight: 75kg
|
|
For critical loads the PowerShield PSCE6000 Centurion offers the best protection against all potential power disruptions and anomalies. This UPS takes the mains power in AC, converts it to DC and then converts the DC back to AC to feed your equipment. |
|
DB0891 |
|
|
|
The relay card (PSAS400) provides volt free contact (VFS) relays that change state upon UPS events. This type of card is often used when current loop communications are required for devices such as building management systems (BMS), access control alarm panels or industrial PLCs. User selectable normally open (default) or normally closed contacts. |
|
D0894 |
|
- Powershield P/No: PSCE3000
- Line interactive (Auto voltage reg.): ±1%
- True online double conversion: Yes
- Battery backup capacity: 3000VA
- Input voltage (nominal): 110-300V AC
- Mains connections: 4 x Australian Sockets, 10A/IEC C13 x 2.
- Communication: RS-232, USB
- Frequency: 50Hz
- Dimensions: 425 x 190 x 335
- Weight: 27kg
|
|
For critical loads the PowerShield PSCE3000 Centurion offers the best protection against all potential power disruptions and anomalies. This UPS takes the mains power in AC, converts it to DC and then converts the DC back to AC to feed your equipment. |
|
D0922 |
|
- Mechanical safety microswitch with static bypass activation is standard. This eliminates the possibility of incorrect switching sequences and hence possible damage to the UPS and injury to personnel
- Optional PDU available to connect 10A/15A devices through IEC distribution outlet sockets
|
|
Mechanical safety microswitch with static bypass activation is standard. This eliminates the possibility of incorrect switching sequences and hence possible damage to the UPS and injury to personnel. 10kVA |
|
SL4566A
|
|
|
|
This 12V 50Ah LiFEPO4 replacement battery is compatible in size with traditional 50Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
|
SL4581A
|
|
|
|
This 12V 150Ah LiFEPO4 replacement battery is compatible in size with traditional 150Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
|
M8863A |
|
- Input: 100-240V AC 50/60Hz 0.6A (max)
- Output (USB C): 5V/3A, 9V 2.22A, 12V/1.67A (20W)
- Output (USB A): 5V/3A, 9V 2A, 12V/1.5A (18W)
- Dimensions: 42.5 x 26 x 74mm
- Plug: Australian Plug
|
|
This powerful USB charger features a QuickCharge 3.0 port as well as a USB C port to suit the latest devices. |
|
N2130 |
|
|
|
Extend Battery Life up to 3x Times! The all new ANBI Battery Conditioner transmits a high frequency digital pulse within the battery. These digital pulse frequencies break down the sulphates in the battery, extending battery life and increasing battery reliability. |
|
M8650A |
|
|
|
This Anderson style plug adaptor cable suits a Waeco fridge. |
|
M8538 |
|
- Simple plug and charge operation
- Can be left permanently on charge
- Interchangeable charge leads
- Includes crocodile clip and ring terminal connections
- Two state LED charge indicator
- Ideal for charging back up auxiliary batteries and LiFePO4 battery powered vehicles, scooters etc.
|
|
This compact charger is suitable for charging Lithium Iron Phosphate batteries (LiFePO4 type) from mains power. |
|
S4571 |
|
- General
- Dimensions: 259L x 168W x 215L mm (including tabs)
- Weight: 24kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 80Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): ≤6.6mΩ
- Max. Discharge Current: 900A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 22.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 80Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
X3278B |
|
- Detection Range: 5-7Metres
- Voltage Range: 5-24Volts
- Maximum Current: 5Amps
- Adjustable Activation Time: 15-300seconds
|
|
A simple PIR motion activated switch which can be plugged in-line between any DC device using a 2.1mm plug. Can be used to activate lighting when movement is detected. Ideal for LED strips, however can be used to motion activate anything with a 2.1mm DC socket. |
|
P6735 |
|
|
|
2.5mm Socket to 2.5mm right angle (90°) plug cable. Allows you to connect power to equipment with limited rear space behind equipment. Minimises cable strain and plug damage in tight spaces. |
|
P6734 |
|
|
|
2.1mm Socket to 2.1mm right angle (90°) plug cable. Allows you to connect power to equipment with limited rear space behind equipment. Minimises cable strain and plug damage in tight spaces. |
|
P6731 |
|
|
|
USB Type C to 2.1mm DC Adapter |
|
P6730 |
|
|
|
Micro USB to 2.1mm DC Adapter |
|
D0886 |
|
- Stylish and informative LCD display
- Surge Protection, Best in its Class
- Excellent microprocessor control guarantees high reliability
- Australian outlets for UPS and Surge Protection
- Boost and buck AVR for voltage stabilization
- User replaceable batteries
- Silent Operation (No fans included)
- Auto restart while AC is recovering
- Off-mode charging
- Cold start function
- USB communication with sophisticated NetGuard software
|
|
The Powershield Defender AVR 2000VA Uninterruptible Power Supply (UPS) is designed to support multiple computers and peripherals, networked PC's and point of sale systems. |
|
D0505B
|
|
- Nominal Voltage: 3.7V
- Typical Capacity: 5000mAh / 18.5Wh
- Weight: 72.8g
- Dimensions: 109.7L x 66W x 9.9Dmm.
|
|
A high capacity, slimline, lithium-polymer battery bank designed to keep your smart- phone, tablet or handheld game console powered up whilst out and about! |
|
A0290A |
|
- Charges 4 x AA/AAA or 2 x 9V cells at once
- Charging / fully charged indication
- Powered by any USB charger at home or in the car
- Compatible with NiMH or NiCad cells
- Over-charge protection
- Short-circuit protection
- Reverse polarity protection
|
|
Charges up to four AA/AAA or 2 x 9V Ni-MH or Ni-Cad cells at once for keeping your devices powered up. Indicators display charging mode at a glance. Automatically stops once cells are charged. |
|
SG4577 |
|
- Physical Size
- Length: 300mm
- Width: 171mm
- Height (Total inc. tabs): 215mm
- Weight: 31kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 110Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): ≤5mΩ
- Max. Discharge Current (5s): 1000A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: IT (F8) /NB (F16)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 33A
- Charge Voltage: 14.4V to 14.8V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
These are suitable for every day use in golf buggies, wheelchairs, forklifts and remote power applications. |
|
SG4563 |
|
- Physical Size
- Length: 197mm
- Width: 165mm
- Height (Total inc. tabs): 170mm
- Weight: 14.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 40Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8mΩ
- Max. Discharge Current (5s): 480A (5s)
- Battery Life: 6-9 years standby
- Terminal Type: NB (F14)/IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 12A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
These are suitable for every day use in golf buggies, wheelchairs, forklifts and remote power applications. |
|
SG4560 |
|
- Physical Size
- Length: 195mm
- Width: 130mm
- Height (Total inc. tabs): 155mm
- Weight: 10.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 33Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 12mΩ
- Max. Discharge Current (5s): 330A (5s)
- Battery Life: 5-7 years standby
- Terminal Type: IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 9.9A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
These are suitable for every day use in golf buggies, wheelchairs, forklifts and remote power applications. |
|
SG4554 |
|
- Physical Size
- Length: 166mm
- Width: 175mm
- Height (Total inc. tabs): 125mm
- Weight: 8.8kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 28Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8.3mΩ
- Max. Discharge Current (5s): 390A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: IT (F12)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 9A
- Charge Voltage: 14.4V to 14.8V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
These are suitable for every day use in golf buggies, wheelchairs, forklifts and remote power applications. |
|
SG4571 |
|
- Physical Size
- Length: 258mm
- Width: 166mm
- Height (Total inc. tabs): 215mm
- Weight: 24.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 80Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 5mΩ
- Max. Discharge Current (5s): 900A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: NB (F14)/IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 24A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
These are suitable for every day use in golf buggies, wheelchairs, forklifts and remote power applications. |
|
SG4567 |
|
- Physical Size
- Length: 229mm
- Width: 138mm
- Height (Total inc. tabs): 213mm
- Weight: 17.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 60Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8.3mΩ
- Max. Discharge Current (5s): 660A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: NB (F14)/IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 16.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
These are suitable for every day use in golf buggies, wheelchairs, forklifts and remote power applications. |
|
S4579 |
|
- General
- Dimensions: 410L x 176W x 227H mm (including tabs)
- Weight: 36kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 125Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 5mΩ
- Max. Discharge Current: 1300A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M8/F17
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 40A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 126Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
S4576 |
|
- General
- Dimensions: 330L x 173W x 220H mm (including tabs)
- Weight: 30.5kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 100Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): <5.5mΩ
- Max. Discharge Current: 950A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M8/F17
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 27A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 100Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
S4574 |
|
- General
- Dimensions: 303L x 169W x 215H mm (including tabs)
- Weight: 27kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 90Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): ≤6mΩ
- Max. Discharge Current: 1080A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 27A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 90Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
S4569 |
|
- General
- Dimensions: 350L x 167W x 179H mm (including tabs)
- Weight: 21kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 65Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8mΩ
- Max. Discharge Current: 650A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 19.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 70Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
S4567 |
|
- General
- Dimensions: 229L x 138W x 213H mm (including tabs)
- Weight: 16.5kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 60Ah @ 20hour rate. FV (1.75/Cell)
- Internal Resistance (1KHz): 7.5mΩ
- Max. Discharge Current: 660A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 16.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 60Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
S4561 |
|
- General
- Dimensions: 195L x 130W x 155H mm (including tabs)
- Weight: 10.7kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 35Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8mΩ
- Max. Discharge Current: 525A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 10.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 35Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
S4550 |
|
- General
- Dimensions: 181L x 76W x 167H mm (including tabs)
- Weight: 5.4kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 18Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): ≤16mΩ
- Max. Discharge Current: 180A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M5/F13
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 5.4A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 18Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
SL4576B
|
|
|
|
This 12.8V 100Ah lithium battery (LiFePO4) is compatible in size with traditional 90-100Ah SLA batteries (check dimensions), but with all the benefits of cutting edge lithium technology. |
|
M8163 |
|
- High efficiency: 97%
- Wide input voltage from 18-35V
- Waterproof & anti-shock protection
- Compact size
- IP68 rating
- Die-cast shell
- Over current, over temperature and short circuit protection
- Non-isolated module
|
|
An ever-increasing amount of electronic and electrical equipment are being installed in vehicles and boats. Because most low-voltage equipment, such as navigational aids, radio equipment, phones and car hi-fi systems are designed for 12 Volts and are not suitable for connection to a 24V battery system. |
|
M8862B |
|
- Input: 100-240V a.c. 50/60Hz 0.5A
- Output: 5V d.c. 3.4A
|
|
An ideal choice for couples, families or even anyone who has two devices that need to be charged. |
|
Q3203 |
|
- Input: DC 1.5V (1pc LR03 battery): 1-5 columns (POOR) ; 6-10 columns (FAIR) ;11-18 columns (GOOD)
- Battery tester for: 1.5V, 3V button cells and 1.5V, 3V, 9V Cylindrical cell( non-rechargeable lithium)
- Sizes for cylindrical cells include: AA/AAA/AA/C/D/N/CR-V3/2CR5/CRP2/9V/CR2/CR123A .
|
|
Allows quick voltage testing on consumer battery cells, including rechargeable cells. Suitable for use with AAA, AA, C, D, 9V, CR123A, CR2, CRV3, 2CR5, CR-P2. |
|
P8149 |
|
- App Controlled
- Voice Control
- Set timers
- Control Lighting
- Works from anywhere!
|
|
Switch any connected appliance on or off remotely from anywhere in the world! |
|
P8290A |
|
- Fitted with 3 pin mains connectors.
- 10 metre length.
- 3 x 1mm2 conductors
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
Heavy duty black plugs and lead. 10m |
|
S4735
|
|
- Nominal Capacity: 2000mAh (0.2C, 2.5V discharge)
- Minimum Capacity: 2550mAh (10A, 2.5V discharge)
- Charging Voltage: 4.2 ±0.05 V
- Nominal Voltage: 3.6V
- Charging Method: CC-CV (constant voltage with limited current)
- Charging Current: Standard charge: 2000mA, Rapid charge : 2000mA
- Charging Time: Standard charge: 150min, Rapid charge: 80min
- Max. Charge Current: 2600mA (ambient temperature 25°C)
- Max. Discharge Current: 30A (ambient temperature 25°C)
- Discharge Cut-off Voltage: 2.5V
- Cell Weight: 48.0g max
- Cell Dimension: Height: 65.00, Diameter: 18.43
- Operating Temperature: Charge: 0 to 45°C, Discharge: -20 to 80°C
- Storage Temperature 1 year: -30~25°C, 3 months: 30~45°C, 1 month: -30~60°C
|
|
These high performance 18650 lithium ion 3.7V batteries offer high performance and long life from a compact package. They are 18.6mm in diameter and 65mm long. They offer a higher maximum current output than the standard 18650 batteries. |
|
SL4578A
|
|
|
|
This 12.8V 120Ah lithium battery (LiFePO4) is compatible in size with traditional 90-130Ah SLA batteries (check dimensions), but with all the benefits of cutting edge lithium technology. |
|
SL4557A
|
|
|
|
This 30Ah LiFEPO4 replacement battery is compatible in size with traditional 26Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
|
SL4551A
|
|
|
|
This 20Ah LiFEPO4 replacement battery is compatible in size with traditional 20Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
|
SL4547A
|
|
|
|
This 12Ah LiFEPO4 replacement battery is compatible in size with traditional 12Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
|
SL4541A
|
|
|
|
This 8Ah LiFEPO4 replacement battery is compatible in size with traditional 7Ah/9Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
|
M8648 |
|
|
|
Turns an Anderson output into a USB charger and car accessory socket for powering devices. Max 2.1A current per USB port. |
|
M8628B |
|
- Triple USB A ports
- Easy to use
- Great for keeping devices powered up in the car
- Sleek design
|
|
This triple charger allows you to power up to three devices in your car. Max combined current output is 7.2A. Ideal for couples, families and individuals with multiple devices. Charge a range of devices including; phones, tablets, cameras etc. |
|
P6708 |
|
|
|
Allows you to power a DC appliance such as a camping fridge or compressor from a AC/DC 2.1mm tip plugpack. |
|
P6707 |
|
|
|
Adapts 2.1mm DC outlet to car accessory socket. Ideal for powering auto compressor from jump starter or portable battery pack. |
|
M8656 |
|
- Length: 300mm
- Cable type: 2 x 8AWG
- Input Connection: Ring Terminal (M8)
- Output Connection: Plug
- Output Type: Anderson 50A 2 Pole
- Fuse: In-line 50A Maxi blade fuse
- Output Quantity: 2pc
- AC current rating: 50A
- DC current rating: 50A
- Current Draw: 50A
|
|
This Anderson style ring terminal adaptor cable allows you to permanently connect an Anderson style connection cable to your vehicles battery. |
|
M8973A |
|
|
|
Super-compact regulated power supplies. Energy authority approved. MEPS approved. All models are Energy Authority approved and suitable for shipping with other OEM products. Require P 8410C IEC lead. Dimensions: 167 x 65 x 40mm. |
|
M8941 |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- MEPS approved.
|
|
12V DC Switchmode Powerpack. Super-compact regulated power supplies. Supplied with fixed 2.1mm DC jack. 100-240V AC input via IEC C13 socket. Energy authority approved. MEPS approved. Dimensions: 143Wx58x34Dmm. |
|
M8972A |
|
- Australian standards compliant
- Suitable for a range of electronic devices
|
|
24V DC Switchmode Powerpack. Super-compact regulated power supplies. Supplied with fixed 2.1mm DC jack. 100-240V AC input via IEC C13 socket. Energy authority approved. MEPS approved. Dimensions: 143Wx58x34Dmm. |
|
P6701A |
|
|
|
A black 1m lead with a 2.1mm DC plug to a USB type 'A' plug. Suitable for powering 5V devices. |
|
N2099A |
|
- Receive notification alerts when Bluetooth in range
- Check vehicle cranking system automatically while engine starting
- Check charging system (alternator)
- List driving periods
- Alert smartphone if abnormalities occur.
- Short-circuit and reverse connection protection
- Data stored in battery monitor for up to 31 days
- Automatic synchronisation when in Bluetooth range
- Compatible with all 12V vehicle batteries
- Graphical historical data display
- Engine starting detection automatically
- Free BM2 app for both iOS and Android devices
|
|
Monitor your battery from your phone! Ensure your battery doesn’t go flat with this handy Bluetooth® battery monitor. Provides live feedback on your vehicle or auxiliary battery, plus long term stats. |
|
A0304A |
|
- Power Rating: 220V - 240VAC
- Power Handling: 2400W
- Max. Load Current: 10AMP
- WARNING: This adapter does NOT convert voltages. For use with 240VAC only.
|
|
This travel adaptor is most commonly used in the following countries: United States of America and Japan |
|
M8630A |
|
- QC3.0 charging
- 36W Power
- Dual USB A ports
- Easy to use
- Car essential
- Sleek design
|
|
This charger provides dual QC3.0 USB type A charging outputs; 5V/3A, 9V/2A, 12V/1.5A . The charger is ideal for couples, families and individuals with multiple devices. The charger has a 12-24V DC input. With the charger users can charge a range of devices including; phones, tablets, cameras etc. |
|
M8169 |
|
- High efficiency: 95.5%
- Input reversing polarity protection
- Input transient absorption protection
- Support -40°C environment
- 100% full load burn in test
- IP65 rating
- Over current, over temperature and short circuit protection
- Non-isolated module
|
|
This converter provides a regulated 12V d.c. output at a maximum of 30A from a typical 24V battery. Dimensions: 110x70x23mm |
|
S4552 |
|
- General
- Dimensions: 181L x 77W x 167H mm (including tabs)
- Weight: 5.9kg
- Capacity
- 20 Hour Rate (10.5V): 20Ah
- 10 Hour Rate (10.5V): 18.7Ah
- 1 Hour Rate (9.6V): 13Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- Charging
- Internal Resistance: Approximately 14MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 6A
- Maximum Discharging Current: 300A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 20Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
M8946 |
|
- MEPS efficiency level: V
- Australian standards compliant
- Suitable for a range of electronic devices
|
|
Super compact regulated power supply. 100V - 240V ac input. Energy authority approved and MEPS approved. Supplied with a fixed 2.1mm dc jack. |
|
M8916B |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
6V DC Switchmode Plugpack Supplied with a fixed positive to tip 2.1mm DC jack. Compact design with high current regulated output. |
|
M8980B |
|
- Voltage Input: 100-240V AC 60/50Hz
- Voltage Output: 3, 4.5, 5, 6, 7.5, 9 and 12V DC @ 1A
- Efficiency Level: V
|
|
A slim line multi-voltage plug pack with the adjustment switch on the side of the unit that faces the wall when installed. This prevents accidental change of output voltage which may cause damage to a connected appliance. |
|
M8882A |
|
- Rapid charging with BC1.2 technology, power output up to 2.4A
- Innovative design for space saving, put your devices on top of charging station when charging
- Adjustable separators allows you to adjust the width needed for different devices
- Protection against over-charging, over-voltage, over-heating and short circuit
- Solid and stable base, it can support up to 10 devices
- 2 charging ports with QC3.0
- QC3.0 is backward compatible with Quick Charge 2.0
|
|
This 10 port USB charger allows you to charge up to 10 mobile devices at once. Ideal for workplaces, schools and large families. Keep everything charged up and ready to go. |
|
P0698 |
|
- Input Voltage: 12V DC
- USB Output Voltage: 5V
- Product Switch Function: RESET/OFF
- Output: 15A 12V DC
- Product Size: 50 x 187 x 70 mm
- Mounting Hole Size: 14.6 x 2.9cm
- Voltmeter Test Range:6-30V
|
|
A flush panel mount facia with usb, car accessory and voltmeter with on/off switch |
|
P0697 |
|
- Input Voltage: 12V DC
- USB Voltage: 5V
- Product Switch Function: RESET/OFF
- Output: 15A 12V DC
- Product Size: 50 x 130 x 70 mm
- Mounting Hole Size: 37 x 90mm
|
|
A flush panel mount facia with usb and car accessory with on/off switch |
|
M8655 |
|
|
|
A 2m Anderson style cable fitted with USB type C Power Delivery Charger (18W) & USB QC 3.0 port for keeping devices charged in remote battery systems. |
|
M8653 |
|
|
|
This Anderson style plug adaptor cable suits an Engel socket. |
|
P8429 |
|
- Fitted with 3 pin mains connector.
- 2 metre length.
- 3 x 0.75mm2 conductors
- Pre-stripped bare end connection.
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
7.5A 3 pin 2m white, bare ends 6.4mm diameter. Energy Authority approved. |
|
P8428 |
|
- Fitted with 3 pin mains connector.
- 2 metre length.
- 3 x 0.75mm2 conductors
- Pre-stripped bare end connection.
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
7.5A 3 pin 2m black, bare ends, 6.4mm diameter. Energy Authority approved. |
|
P8431C |
|
- Fitted with IEC C7 connector and standard Australian 2 pin mains plug.
- Length: 0.75m
- 2 x 0.75mm2 conductors
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
2 Pin to Figure 8 plug 5.0m. Energy Authority approved.
Ideal for installers when wall mounting televisions. |
|
P8143 |
|
- Power supply: 250V a.c. 50Hz
- Rated Current: 10A
- Rated Output: 2500W
- Trip Leakage current: 30mA
- Trip time: <30mS
- Type of protection: IP40
|
|
A handy in-line connection residual current detection switch which measures for electrical leakage. |
|
A0347 |
|
- Outlets work hidden behind equipment and cabinets!
- Outlet's channel is programmable (CH1-4)
- Multiple outlets can share the same channel to be controlled simultaneously
- Saves stand-by power
- Saves from your electricity bill
- Can be used in conjunction with a power board
- Built-in receiver memory stores data for up to 10 years
- Turn individual receivers on or off or a single button to turn all receivers on or off at the same time
|
|
Cut standby power usage around the home and office by switching appliances off at the wall via remote control. Easy inline connection between the GPO and your appliance |
|
A0346 |
|
- Kit includes 1 RF remote + 1 outlets
- RF Remote control means line-of-sight is not necessary
- Outlets work hidden behind equipment and cabinets!
- Outlet's channel is programmable (CH1-4)
- Multiple outlets can share the same channel to be controlled simultaneously
- Saves stand-by power
- Saves from your electricity bill
- Can be used in conjunction with a power board
- Built-in receiver memory stores data for up to 10 years
- Turn individual receivers on or off or a single button to turn all receivers on or off at the same time
|
|
Cut standby 240V power usage around the home and office by switching appliances off at the wall via remote control. Easy inline connection between the GPO and your appliance |
|
T5098
|
|
- Suits batteries up to 100Ah
- Dual 50A Anderson Plugs
- 12V Cigarette Socket
- 2 x 50A maxi blade fuses in circuit for extra protection.
- Lid with dual side clips for extra secure fit.
- Dual USB Ports with high current output (2 x 2.4A)
- Handy bar graph LED Voltmeter
- Circuit Breaker Switch
|
|
This 12V battery box features all the common connections that would typically be required for outdoor recreation power needs. |
|
M8521A |
|
- Suitable for all 6V and 12V lead acid and gel batteries
- Suits battery recharging or maintenance (may be permanently connected).
- Protection against short circuit
- Ideal for battery storage or seldom used vehicles
- Light weight ‘plug in’ design
- Ring terminal or crocodile clip connection
|
|
This 6V/12V battery charger maintainer offers 600mA charging suitable for lead, gel cell and lead-acid batteries, including maintenance-free batteries. |
|
S4565 |
|
- General
- Dimensions: 197L x 165W x 170H mm (including tabs)
- Weight: 14.6kg
- Charging
- 20 Hour Rate (10.5V): 50Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 9MΩ
- Max Discharge Current: 540A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: NB(F4)/IT(F8)
- Container Material: ABS
- Max Charge Current: 15A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 50Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
S4548 |
|
- General
- Dimensions: 151L x 98W x 98H mm (including tabs)
- Weight: 3.7kg
- Charging
- 20 Hour Rate (10.5V): 12Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 15MΩ
- Max Discharge Current: 165A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 3.3A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
Premium grade, long life and maintenance free sealed lead acid batteries. Cells are fully sealed to prevent leakage of electrolyte. |
|
S4545 |
|
- General
- 151L x 65W x 119H mm (including tabs)
- Weight: 3.2kg
- Charging
- 20 Hour Rate (10.5V): 10Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 20MΩ
- Max Discharge Current: 135A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 3.0A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 10Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
S4543 |
|
- General
- 151L x 65W x 100H mm (including tabs)
- Weight: 2.65kg
- Charging
- 20 Hour Rate (10.5V): 9Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 18MΩ
- Max Discharge Current: 135A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 2.52A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 9Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
S4539 |
|
- General
- Dimensions: 151L x 65W x 102H mm (including tabs)
- Weight: 2kg
- Charging
- 20 Hour Rate (10.5V): 7Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 28m Ohm
- Max Discharge Current: 70A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 2.1A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 7Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
S4538 |
|
- General
- Dimensions: 151L x 65W x 102H mm (including tabs)
- Weight: 2kg
- Charging
- 20 Hour Rate (10.5V): 7Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 28MΩ
- Max Discharge Current: 70A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 4.8mm/F1
- Container Material: ABS
- Max Charge Current: 2.1A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
Premium grade, long life, maintenance free sealed lead acid batteries. Cells are fully sealed to prevent leakage of electrolyte. |
|
S4530 |
|
- General
- Dimensions: 134L x 67W x 66H mm (including tabs)
- Weight: 1.35kg
- Charging
- 20 Hour Rate (10.5V): 3.5Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 32MΩ
- Max Discharge Current: 54A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 4.8mm/F1
- Container Material: ABS
- Max Charge Current: 1.08A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 3.5Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
M8942A |
|
|
|
Super-compact regulated power supplies. Supplied with 2.1mm DC jack. 100-240V AC input. Energy authority approved. MEPS approved. Requires P 8417 IEC lead. Dimensions: 167 x 65 x 40mm.
|
|
P8440 |
|
- Fitted with IEC15 connector and 3 pin Australian mains plug.
- 1m metre length.
- 3 x 1mm2 conductors
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
IEC15 Female to 3 Pin 1m. Energy authority approved. |
|
S4482 |
|
- Cell Per Unit: 3
- Nominal Voltage (V): 6
- Nominal Capacity (Ah): 1.3Ah @ 20hour rate F.V (1.75/Cell)
- Weight: Approx. 0.33kg
- Internal Resistance (1KHz): 38mΩ
- Max Discharge Current (5s): 19.5A (5s)
- Battery Life: Stand by 3~5 years
- Terminal Type: F1
- Container Material: ABS
- Charge 0°C to 40°C
- Discharge -15°C to 50°C
- Storage -15°C to 40°C
- Max Charge Current: 0.39A
- Charge Voltage: 7.2V to 7.5V
- Stand By: Charge Voltage: 6.75 to 6.90V
- Physical Size (mm): 97L x 25W x 57H mm (including tabs)
- Weight: 0.32kg
|
|
This 6V 1.3Ah sealed lead acid (SLA) battery is a compact battery for powering 6V equipment. |
|
PW8438 |
|
- Fitted with IEC C13 connector and standard Australian 3 pin mains plug with earthing pin.
- 2 metre length.
- 3 x 0.75mm2 conductors
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
White mains appliance power cable. IEC Female to 3 Pin 2m. Energy authority approved |
|
PW8404 |
|
- Fitted with IEC C7 connector and standard Australian 2 pin mains plug.
- 1.8 metre length.
- 2 x 0.75mm2 conductors
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
White mains appliance power cable. 2.5A 2 Pin to Figure 8 plug 1.8m. Energy Authority approved. |
|
P6703 |
|
|
|
A black 1m lead with a 1.35mm DC plug to a USB type 'A' plug. |
|
P8156 |
|
- High surge protection
- Recessed On/Off Switch
- Wide spaced socket to allow for plug packs
- $60,000 Connected Equipment Warranty – terms and conditions apply.
- 10A Circuit Breaker
- 1 x Type A USB Socket
- 1 x Type C USB Socket
- 8 x Surge-protected sockets supply complete, 3 line AC protection
- Impact and scratch resistant Polycarbonate case
- Heavy-duty 1.2-meter power cord
- Wall mountable
- LED indicator shows that your wiring is properly earthed and protection is active and available
|
|
This powerboard will protect your home and office electronics from dangerous surges and spikes and is ideal for charging mobiles, laptops and other small USB powered devices. |
|
DA0924
|
|
- True double-conversion
- HID comms via USB
- Output power factor 0.9
- User-friendly and electronic easy-shift LCD display
- Rack or Tower design
- Advanced ECO mode for energy saving
- Generator compatible
- Programmable power management outlets
- Emergency Power Off function (EPO)
- Hot swappable battery design
- Ideal for medium density power protection
- Extra large charger
|
|
features true online double conversion and a Lithium-iron Phosphate advantage that includes extended battery life, lighter weight, faster recharge, higher performance and higher power density. |
|
DA0922
|
|
- True double-conversion
- HID comms via USB
- Output power factor 0.9
- User-friendly and electronic easy-shift LCD display
- Rack or Tower design
- Advanced ECO mode for energy saving
- Generator compatible
- Programmable power management outlets
- Emergency Power Off function (EPO)
- Hot swappable battery design
- Ideal for medium density power protection
- Extra large charger
|
|
features true online double conversion and a Lithium-iron Phosphate advantage that includes extended battery life, lighter weight, faster recharge, higher performance and higher power density. |
|
DA0920
|
|
- True double-conversion
- HID comms via USB
- Output power factor 0.9
- User-friendly and electronic easy-shift LCD display
- Rack or Tower design
- Advanced ECO mode for energy saving
- Generator compatible
- Programmable power management outlets
- Emergency Power Off function (EPO)
- Hot swappable battery design
- Ideal for medium density power protection
- Extra large charger
|
|
features true online double conversion and a Lithium-iron Phosphate advantage that includes extended battery life, lighter weight, faster recharge, higher performance and higher power density. |
|
N2097 |
|
- Suitable for any 12VDC system up to 8A direct current loads like motors, lamps, heaters & LEDs (with current limiting resistors).
- Electric motor can start smoothly at low speed with this PWM controller.
- Replaces the resistor circuit for control of the speed of DC motors
- Frequently used as light dimmer.
- Energy efficient with zero to full speed control
- Light dimmer capable of smooth control
- The whole PCBA is potted in epoxy and with the special splash proof tuning potentiometer making this controller weather proof.
|
|
This 12VDC 8A pulse width modulator (PWM) is a general purpose DC output power control. |
|
D0511B
|
|
- Ultra high capacity power bank with Power Delivery and Quick Charge™ function.
- Charge latest tablets, smartphones, portable game consoles and more.
- USB-C Power Delivery will deliver power delivery support at 18W to compatible devices.
- Dual Quick Charge™ 3.0 outputs will charge compatible smartphones and tablets 4 times faster.
- High speed Micro USB (QC2.0) and USB-C (Power Delivery) inputs for recharging.
|
|
Offering both the latest QuickCharge 3.0 charging and 18W USB-C PD output, this enormous 20,000mAh power bank will keep your devices charged away from mains power. 136x70x25mm |
|
M9393B |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
24V DC Switchmode Plugpack Supplied with reversible polarity 2.1mm DC tip. Compact design with high current regulated output. |
|
D2324 |
|
- 15W charging coil for superior recharge speeds.
- Upright charging position provides easy way to see notifications at a glance.
- Charging status LED in base.
- Suitable for fast wireless charging (when paired with QC 3.0 mains wall charger).
- Includes USB connection cable.
|
|
This 15W wireless phone charger stand is ideal for home or office. |