|
Description |
Downloads |
Specs |
Ordering |
|
 |
D0874 |
|
- Automatic Voltage Regulation (Buck and Boost)
- Informative Screen Display
- USB Charging Port
- Light-weight compact and elegantly designed
- Intelligent microprocessor control
- Monitoring and shutdown software included
- Overload protection and alarm
- Output short circuit protection
- Start on battery function (cold start)
- USB communication
- Easy user-replaceable battery
- Australian/New Zealand approved sockets
- Wall mountable
|
|
The Powershield SafeGuard 1000VA Uninterruptible Power Supply (UPS) is designed for a home/office solution. |
 |
DB0891 |
|
|
|
The relay card (PSAS400) provides volt free contact (VFS) relays that change state upon UPS events. This type of card is often used when current loop communications are required for devices such as building management systems (BMS), access control alarm panels or industrial PLCs. User selectable normally open (default) or normally closed contacts. |
 |
DC0891 |
|
|
|
The PSAS400 communication card provides contact closures for remote monitoring of your UPS. To meet different application requirements the PSAS400 card is capable of selecting the status of the dry-contact signal (active close or active open) by setting jumper. |
 |
S4569 |
|
- General
- Dimensions: 350L x 167W x 179H mm (including tabs)
- Weight: 21kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 65Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8mΩ
- Max. Discharge Current: 650A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 19.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 70Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
D0923 |
|
- 0RU, 10 Outlet Power Distribution Unit (PDU)
- Unmanaged full metal rack-mount PDU
- Built-in 6KA C-Curve circuit breaker
- Rated Voltage: 230V~/60Hz
- 2M Power cord
- Vertical PDU incorporates three-way mounting brackets for ease of installation
|
|
10 Outlet Vertical Power Rail (10A IEC C13) with 6KA C-Curve Circuit Breaker. Integrated 2m power cord (10A IEC C14) 0RU. Colour Black. |
 |
D0929 |
|
|
|
Cartridge style battery replacements enclosed in a plastic housing to prevent accidental shorts and make the replacement process simple. Special order only! |
 |
S4571 |
|
- General
- Dimensions: 259L x 168W x 215L mm (including tabs)
- Weight: 24kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 80Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): ≤6.6mΩ
- Max. Discharge Current: 900A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 22.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 80Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
SG4567 |
|
- Physical Size
- Length: 229mm
- Width: 138mm
- Height (Total inc. tabs): 213mm
- Weight: 17.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 60Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8.3mΩ
- Max. Discharge Current (5s): 660A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: NB (F14)/IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 16.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 60Ah deep cycle battery is a compact battery for powering 12V equipment. Deep cycle sealed lead acid (SLA) batteries are designed for regular discharge. |
 |
SL4557BT NEW
|
|
|
|
This 30Ah LiFEPO4 replacement battery is compatible in size with traditional 26Ah SLA batteries, but with all the benefits of cutting edge lithium technology and bluetooth. |
 |
S4567 |
|
- General
- Dimensions: 229L x 138W x 213H mm (including tabs)
- Weight: 16.5kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 60Ah @ 20hour rate. FV (1.75/Cell)
- Internal Resistance (1KHz): 7.5mΩ
- Max. Discharge Current: 660A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 16.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 60Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
DH0924 |
|
- 1RU, 10 Outlet Power Distribution Unit (PDU)
- Unmanaged full metal rack-mount PDU
- Built-in 6KA C-Curve circuit breaker
- Rated Voltage: 230V~/60Hz
- 2M Power cord
- Horizontal PDU incorporates recessed brackets for cable management
|
|
10 Outlet Horizontal Power Rail (8x 10A IEC C13 & 2x 16A IEC C19) with 6KA C-Curve Circuit Breaker. Integrated 2m power cord (16A IEC C20) 1RU. Colour Black. |
 |
DH0923 |
|
- 1RU 10 Outlet Power Distribution Unit (PDU)
- Unmanaged full metal rack-mount PDU
- Built-in 6KA C-Curve circuit breaker
- Rated Voltage: 230V~/60Hz
- 2M Power cord
- Horizontal PDU incorporates recessed brackets for cable management
|
|
10 Outlet Horizontal Power Rail (10A IEC C13) with 6KA C-Curve Circuit Breaker. Integrated 2m power cord (10A IEC C14) 1RU. |
 |
M8195B
|
|
- Compact design with 20000mAh internal battery pack
- 2500A peak current output for jumpstarting 4, 6 and 8 cylinder vehicles (inc diesels).
- Includes DC output with cigarette lighter socket lead for powering car fridge, lighting, and other portable 12V appliances.
- Includes heavy duty battery clamps, USB type C charging cable and DC to Car Accessory socket adapter
- Supplied with hard wearing zip up carry case.
- Dual USB charging outputs (5V/3A each)
- 1W LED torch
|
|
This lithium battery pack is suitable for jump starting 12V battery equipped vehicles such as cars, 4WDs and agricultural equipment. |
 |
N2087 |
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- MPPT solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 20A MPPT solar input DC to DC battery chargers has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
 |
D0928 |
|
|
|
Cartridge style battery replacements enclosed in a plastic housing to prevent accidental shorts and make the replacement process simple. Special order only! |
 |
S4565 |
|
- General
- Dimensions: 197L x 165W x 170H mm (including tabs)
- Weight: 14.6kg
- Charging
- 20 Hour Rate (10.5V): 50Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 9MΩ
- Max Discharge Current: 540A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: NB(F4)/IT(F8)
- Container Material: ABS
- Max Charge Current: 15A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 50Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
D0873 |
|
- Automatic Voltage Regulation (Buck and Boost)
- Light-weight compact and elegantly designed
- Intelligent microprocessor control
- Monitoring and shutdown software included
- Fax/modem/LAN surge suppression port
- Overload protection and alarm
- Output short circuit protection
- Start on battery function (cold start)
- USB communication
- Easy user replaceable battery
- Australian/New Zealand approved sockets
- Wall mountable
- Fast charging – 90% in 4 hours
|
|
The Office model is perfect for a home/office solution. It includes three battery backup and surge protected Australian sockets, three dedicated Australian outlets with surge protection and RJ45 phone line surge protection. Provides modified sinew |
 |
D0876
|
|
- Includes 4 x Li-Ion batteries
- Auto-start when plugged in
- Microprocessor control
- Multicolour LED indicator and manual Power Off Switch
- Overload, short circuit, over charge and over discharge protection
- Long backup time
- Additional terminal output for hardwired DC connection
- 2.1mm DC input jack
|
|
The Powershield DC - Mini 36 UPS is an ideal back up solution for routers, modems, security cameras, wifi extenders and VOIP phones. |
 |
M8305 |
|
- Input voltage: a.c. 220-240V @ 50Hz
- Output voltage: 0 - 30V d.c.
- Output current max: 5A
- Supply regulation: CV≤1%+10mV
- Load regulation: CV≤1%+5mV
- Ripple: 200mVp-p
- Protection: Current limiting
- Voltmeter: LCD ±1% +2 digits
- Ammeter: LCD ±1% +2 digits
- Temperature: 0ºC-40ºC
- Humidity: Less than RH80%
- Operating time: 8hrs
- Dimensions: 85 x 160 x 205mm
|
|
A compact, efficient bench top power supply for use in servicing, repair and design of electronics. The low noise switchmode design offers excellent regulation for low current requirements. |
 |
M8254 |
|
- Up to 20A output
- Fixed 13.8V voltage
- High efficiency switchmode design
- Low noise and ripple <100mV
- 2% voltage regulation
- Short circuit protected output
- Fused input
|
|
A fixed voltage output power supply designed for powering automotive, marine and comms equipment. |
 |
S4563 |
|
- General
- Dimensions: 197L x 165W x 170H mm (including tabs)
- Weight: 12.5kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 40Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 10mΩ
- Max. Discharge Current (5s): 380A
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 12A
- Charge Voltage: 14.4V to 15.0V
- Stand by:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 40Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
SG4563 |
|
- Physical Size
- Length: 197mm
- Width: 165mm
- Height (Total inc. tabs): 170mm
- Weight: 14.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 40Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8mΩ
- Max. Discharge Current (5s): 480A (5s)
- Battery Life: 6-9 years standby
- Terminal Type: NB (F14)/IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 12A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 40Ah deep cycle battery is a compact battery for powering 12V equipment. Deep cycle sealed lead acid (SLA) batteries are designed for regular discharge. |
 |
M8536B NEW
|
|
- Short circuit and reverse polarity protected
- Suitable for use with lead acid, LiFePO4, AGM/EFB batteries.
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 10A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
 |
SL4551BT NEW
|
|
|
|
This 20Ah LiFEPO4 replacement battery is compatible in size with traditional 20Ah SLA batteries, but with all the benefits of cutting edge lithium technology with Bluetooth. |
 |
M8194A NEW
|
|
- Compact design with 20000mAh (74Wh) internal battery pack
- 2 hour recharge
- Includes all neccessary adaptors, housed in a compact carry case with jumpstarter so users have everything they need on the go
- 1x USB Type-A USB Output
- 1x USB Type-C USB Input/Output
- 1W LED torch
- Includes two DC outputs with cigarette lighter socket lead (1x lead included) for powering car fridge, lighting, and other car accessories.
- Starts typical 4, 6 & 8 cylinder engines (inc diesels).
|
|
This lithium battery pack is suitable for jump starting 12V battery equipped vehicles. The 20000mAh rating provides up to 1000A peak output when cranking. 60W USB C power delivery charging in built. |
