|
Description |
Downloads |
Specs |
Ordering |
|
 |
S4554 |
|
- General
- Dimensions: 165L x 175W x 125H mm (including tabs)
- Weight: 8.3kg
- Terminal: M5 bolt (F12)
- Capacity
- 20 Hour Rate (10.5V): 26Ah
- 10 Hour Rate (10.5V): 24.1Ah
- 1 Hour Rate (9.6V): 16.4Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 15MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 7.8A
- Maximum Discharging Current: 390A (5 sec.)
- Designed Floating Life: 5 years.
|
|
his 12V 26Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
M8534B NEW
|
|
- Short circuit and reverse polarity protected
- Suitable for use with lead acid, LiFePO4, AGM/EFB batteries.
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 6A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
 |
N0005F |
|
- Maximum power: 5W
- Nominal voltage: 12V
- Short circuit current (ISC): 0.31A
- Open circuit voltage: 21.5V
- Maximum power current (IMP): 0.28A
- Maximum power voltage: 18.00V
- Connection: 0.5m bare end fly lead
- Dimensions: 230 x 205 x 18 mm
- Operating temperature: -40° to +85°C
|
|
This quality 5W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. The compact size makes it perfect for battery maintenance in low power equipment. |
 |
M8641 |
|
- Length: 300mm
- Cable: 2 x 8AWG
- Item Connection: Anderson Plug
- Vehicle Connection: Alligator Clamps
- Input Type: Anderson 50A 2 Pole
- Input Connection: Plug
- Output Connection: Plug
- Output Type: Alligator Clips
- Output Quantity: 1pc
|
|
This series of high current connectors are ideal for automotive, 4WD and caravan uses. The connectors are also suitable for industrial interconnection. |
 |
Q0591 |
|
- Electrical parameter measurement function (voltage, current, active power, energy)
- Voltage alarm function (over voltage alarm threshold, backlight and voltage flashing to alarm).
- The reset function of energy key.
- Store data when power off.
- Large-screen LCD (display voltage, current, active power, energy at the same time)
- Backlight function.
|
|
A complete power monitoring panel with voltage, current, power and energy consumption (Wh) displayed simultaneously. |
 |
S4530 |
|
- General
- Dimensions: 134L x 67W x 66H mm (including tabs)
- Weight: 1.35kg
- Charging
- 20 Hour Rate (10.5V): 3.5Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 32MΩ
- Max Discharge Current: 54A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 4.8mm/F1
- Container Material: ABS
- Max Charge Current: 1.08A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 3.5Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
P2181 |
|
- Allows for terminating of heavy-duty cables for one or more connections
- Black colour allows for easy and clear colour coding for wiring
- Glass Fibre reinforced Nylon base ensures great mechanical strength and durability
- Heavy duty terminal studs (up to M10)
|
|
This Dual Black M8 Power Distribution Post with Bridge Plate is a heavy duty stainless steel post that is mounted on a moulded plastic base. 48V DC max. |
 |
S4563 |
|
- General
- Dimensions: 197L x 165W x 170H mm (including tabs)
- Weight: 12.5kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 40Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 10mΩ
- Max. Discharge Current (5s): 380A
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 12A
- Charge Voltage: 14.4V to 15.0V
- Stand by:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 40Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
M8645 |
|
- Length: 300mm
- Cable type: 16AWG twin core
- Input Type: Anderson 50A 2 Pole
- Output Type: Cigarette Lighter 2x15A
|
|
This dual car accessory (cigarette lighter) socket to Anderson plug adaptor cable allows connection of DC appliances fitted with car accessory plugs to be powered from an Anderson extension cable. |
 |
S2694 NEW
|
|
- Pre-wired for simple installation
- Includes 100A battery isolator switch
- SB50 Anderson Style input and output
- Dual car accessory sockets
- 60W USB C PD charger
- 4 x 2.4A USB A charging ports
- Weather resistant caps on all connections
- Internal fuse block
|
|
Designed to manage power distribution in your 12V or 24V vehicle. Measuring just 160x160x80mm, this box is packed with connections. |
 |
P7772 |
|
|
|
Extra crimp lug to suit Anderson style 50A DC power connectors, Altronics part numbers P7760-4. |
 |
P7812 |
|
|
|
Provides easy connection to solar panels and auxiliary batteries/appliances utilising 50A Anderson connection. |
 |
S4565 |
|
- General
- Dimensions: 197L x 165W x 170H mm (including tabs)
- Weight: 14.6kg
- Charging
- 20 Hour Rate (10.5V): 50Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 9MΩ
- Max Discharge Current: 540A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: NB(F4)/IT(F8)
- Container Material: ABS
- Max Charge Current: 15A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 50Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
M8536B NEW
|
|
- Short circuit and reverse polarity protected
- Suitable for use with lead acid, LiFePO4, AGM/EFB batteries.
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 10A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
 |
S4561 |
|
- General
- Dimensions: 195L x 130W x 155H mm (including tabs)
- Weight: 10.7kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 35Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8mΩ
- Max. Discharge Current: 525A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 10.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 35Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4501 |
|
- General
- Dimensions: 151L x 50W x 100H mm (including tabs)
- Weight: 1.75kg
- Capacity
- 20 Hour Rate (5.25V): 12Ah
- 10 Hour Rate (5.25V): 11Ah
- 1 Hour Rate (4.8V): 7.8Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 12MΩ
- Float Charging Voltage: 6.8 - 6.9V @ 25°C (temperature compensation: -9mV/°C)
- Cyclic Charging Voltage: 7.25 - 7.5V @ 25°C (temperature compensation: -15mV/°C)
- Maximum Charging Current: 3.6A
- Maximum Discharging Current: 180A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 6V 12Ah sealed lead acid (SLA) battery is a compact battery for powering 6V equipment. |
 |
S4576 |
|
- General
- Dimensions: 330L x 173W x 220H mm (including tabs)
- Weight: 30.5kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 100Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): <5.5mΩ
- Max. Discharge Current: 950A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M8/F17
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 27A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 100Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4569 |
|
- General
- Dimensions: 350L x 167W x 179H mm (including tabs)
- Weight: 21kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 65Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8mΩ
- Max. Discharge Current: 650A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 19.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 70Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4567 |
|
- General
- Dimensions: 229L x 138W x 213H mm (including tabs)
- Weight: 16.5kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 60Ah @ 20hour rate. FV (1.75/Cell)
- Internal Resistance (1KHz): 7.5mΩ
- Max. Discharge Current: 660A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 16.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 60Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
M8561A NEW
|
|
- 88% efficient switchmode power supply design.
- Protections: overload / over voltage / short circuit / under voltage / reverse polarity.
- 5A max connected load. 650mA battery charging circuit.
- LEDs provide quick status indication.
- Fits a standard size 7.2Ah 12V SLA battery.
- Patented design with simple wall mount installation.
- 100% full load burn-in tested.
- 2 year warranty.
|
|
A complete 12V DC power supply and UPS battery backup in one compact enclosure. When operating from 240V, it automatically charges the internal battery (available separately) and powers the connected load (max 5A). |
 |
SL4581B
|
|
|
|
The latest generation in maintenance free batteries is here! LiFePO4 batteries offer longer service life than traditional lead acid batteries, plus, weigh less than HALF as much as SLA batteries. |
 |
SG4554 |
|
- Physical Size
- Length: 166mm
- Width: 175mm
- Height (Total inc. tabs): 125mm
- Weight: 8.8kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 28Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8.3mΩ
- Max. Discharge Current (5s): 390A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: M5 (F12)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 9A
- Charge Voltage: 14.4V to 14.8V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 26Ah deep cycle battery is a compact battery for powering 12V equipment. Deep cycle sealed lead acid (SLA) batteries are designed for regular discharge. |
 |
Q0596 NEW
|
|
- Easy to read bright display.
- Display backlighting
- Battery capacity meter.
- Ideal for measuring run time for auxiliary batteries, portable and mobile equipment.
- Includes 350A shunt with sampling circuit.
- Configurable battery capacity.
- Adjustable "Full" and "Zero" voltages.
|
|
A compact backlit battery "fuel gauge" with high precision current measurement. |
 |
Q0587 |
|
|
|
An adjustable battery capacity readout allowing you to display approximate battery levels for any battery between 1V and 100V. |
 |
Q2118 NEW
|
|
- Large easy to read LCD display with backlighting.
- Tests battery CCA, voltage, internal resistance, battery health and charge status.
- Provides "Good Battery", "Good Recharge", "Charge Retest", "Replace", "Bad Cell Replace" condition statuses.
- Supports all battery standards, JIS, DIN, IEC, EN, SAW, CA, CCA, GB, BCI, MCA.
- Short circuit and reverse polarity protection.
- Test history display.
- Tests batteries in-situ in vehicle or out of vehicle.
- Quick test function via AH input.
|
|
Detects and analyses battery voltage, cold cranking amperes (CCA), resistance (mΩ) and battery cell condition. |
Powerhouse