|
Description |
Downloads |
Specs |
Ordering |
|
 |
N0005F |
|
- Maximum power: 5W
- Nominal voltage: 12V
- Short circuit current (ISC): 0.31A
- Open circuit voltage: 21.5V
- Maximum power current (IMP): 0.28A
- Maximum power voltage: 18.00V
- Connection: 0.5m bare end fly lead
- Dimensions: 230 x 205 x 18 mm
- Operating temperature: -40° to +85°C
|
|
This quality 5W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. The compact size makes it perfect for battery maintenance in low power equipment. |
 |
N0700A |
|
- Ideal for car, motorcycle, caravan or boat batteries
- Operates in all seasons
- Ideal size to charge & maintain 12V automotive batteries
- Tempered glass with aluminium framing
- Fitted with 2.4m lead & alligator clips
- Suits outdoor installation
- Suits standard vehicle batteries
- Crocodile Clip Connection
- Car Plug Connection
|
|
These compact monocrystalline solar panels are designed for keeping your car, caravan or 4WD batteries topped up when parked. Easy croc clip or car accessory plug connection. Can even be permanently installed outdoors. |
 |
P7812 |
|
|
|
Provides easy connection to solar panels and auxiliary batteries/appliances utilising 50A Anderson connection. |
 |
Q0591 |
|
- Electrical parameter measurement function (voltage, current, active power, energy)
- Voltage alarm function (over voltage alarm threshold, backlight and voltage flashing to alarm).
- The reset function of energy key.
- Store data when power off.
- Large-screen LCD (display voltage, current, active power, energy at the same time)
- Backlight function.
|
|
A complete power monitoring panel with voltage, current, power and energy consumption (Wh) displayed simultaneously. |
 |
M8640 |
|
- Length: 300mm
- AC current rating: 50A
- DC current rating: 50A
- Input Type: Anderson 50A 2 Pole
- Input Connection: Plug
- Output Connection: Plug
- Output Type: Anderson 50A 2 Pole
- Output Quantity: 1pc
|
|
This double Anderson style piggyback adaptor cable allows you to split a single Anderson connector output into two. Ideal for connecting between battery and solar panels or between battery and DC appliances. Pre-made with tinned copper cable and machine crimped terminations. |
 |
N0010F |
|
- Maximum power: 10W
- Nominal voltage: 12V
- Short circuit current (ISC): 0.65A
- Open circuit voltage: 21.5V
- Maximum power current (IMP): 0.56A
- Maximum power voltage: 18.00V
- Connection: 0.5m bare end fly lead
- Dimensions: 364 x 230 x 18 mm
- Operating temperature: -40°C to +85°C
|
|
This quality 10W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. The compact size makes it perfect for battery maintenance in low power equipment. |
 |
S4542 |
|
- General
- Dimensions: 151L x 65W x 100H mm (including tabs)
- Weight: 2.6kg
- Capacity
- 20 Hour Rate (10.5V): 9Ah
- 10 Hour Rate (10.5V): 8.4Ah
- 1 Hour Rate (9.6V): 5.9Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 20MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 2.7A
- Maximum Discharging Current: 135A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 9Ah sealed lead acid (SLA) battery is one of the most common size SLA batteries in use. |
 |
S4543 |
|
- General
- 151L x 65W x 100H mm (including tabs)
- Weight: 2.65kg
- Charging
- 20 Hour Rate (10.5V): 9Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 18MΩ
- Max Discharge Current: 135A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 2.52A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 9Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4545 |
|
- General
- 151L x 65W x 119H mm (including tabs)
- Weight: 3.2kg
- Charging
- 20 Hour Rate (10.5V): 10Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 20MΩ
- Max Discharge Current: 135A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 3.0A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 10Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
M8655 |
|
|
|
A 2m Anderson style cable fitted with USB type C Power Delivery Charger (18W) & USB QC 3.0 port for keeping devices charged in remote battery systems. |
 |
M8636A |
|
- Operates 8-60V DC
- Ideal for 12V or 24V DC electrical systems
- Displays volts, amps, watts and average watts
- Backlit LCD Screen
- Anderson style connectors for easy connection
- Use with fridges, solar panels, dual battery systems and battery packs.
|
|
The perfect solution for measuring input and output currents and wattage from solar panels or batteries. |
 |
N2099A |
|
- Receive notification alerts when Bluetooth in range
- Check vehicle cranking system automatically while engine starting
- Check charging system (alternator)
- List driving periods
- Alert smartphone if abnormalities occur.
- Short-circuit and reverse connection protection
- Data stored in battery monitor for up to 31 days
- Automatic synchronisation when in Bluetooth range
- Compatible with all 12V vehicle batteries
- Graphical historical data display
- Engine starting detection automatically
- Free BM2 app for both iOS and Android devices
|
|
Monitor your battery from your phone! Ensure your battery doesn’t go flat with this handy Bluetooth® battery monitor. Provides live feedback on your vehicle or auxiliary battery, plus long term stats. |
 |
Q0592 |
|
|
|
This meter is used to monitor all kinds of battery voltage, discharge current, discharge power, discharge impedance, internal resistance, capacity, SOC, energy, running time and display the measurement data through the LCD screen. |
 |
S4547 |
|
- General
- Dimensions: 151L x 98W x 101H mm (including tabs)
- Weight: 3.6kg
- Capacity
- 20 Hour Rate (10.5V): 12Ah
- 10 Hour Rate (10.5V): 11.2Ah
- 1 Hour Rate (9.6V): 7.8Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 20MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 3.6A
- Maximum Discharging Current: 180A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 12Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4548 |
|
- General
- Dimensions: 151L x 98W x 98H mm (including tabs)
- Weight: 3.7kg
- Charging
- 20 Hour Rate (10.5V): 12Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 15MΩ
- Max Discharge Current: 165A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 3.3A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
Premium grade, long life and maintenance free sealed lead acid batteries. Cells are fully sealed to prevent leakage of electrolyte. |
 |
M8072 |
|
- Converts 12V DC to 240V AC mains power
- All metal construction for use in rugged environments
- Soft starting
- Modified sine wave
- Reverse polarity protection
- Output overload protection
- Over temperature protection
- High and low battery voltage shutdown
- Output short circuit protection
- Standard AC mains outlet for 240V connection
- Car accessory plug connection
|
|
This compact rugged inverter is ideal for portable TVs, laptops, printers, battery chargers, portable Hi-Fi's, power drills, power tools, small pumps, lighting, etc. Supplied complete with integral mounting base plate for securing to a vehicle or caravan. |
 |
N0704A |
|
- Ideal for car, motorcycle, caravan or boat batteries
- Operates in all seasons
- Ideal size to charge & maintain 12V automotive batteries
- Tempered glass with aluminium framing
- Fitted with 2.4m lead & alligator clips
- Suits outdoor installation
- Suits standard vehicle batteries
- Crocodile Clip Connection
- Car Plug Connection
|
|
These compact monocrystalline solar panels are designed for keeping your car, caravan or 4WD batteries topped up when parked. Easy croc clip or car accessory plug connection. Can even be permanently installed outdoors. |
 |
M8646 |
|
- Anderson style plugs
- Suitable for solar panels
- Provides 3m extension to assist you chase the sun or include an additional solar panel in your system
- 50 Amp
- 2 x 8AWG cable
|
|
This lead is ideal for automotive, 4WD and caravan uses. This lead will provide you with extra length where required or enable the connection of a second solar panel. |
 |
N0020F |
|
- Maximum power: 20W
- Nominal voltage: 12V
- Short circuit current (ISC): 1.25A
- Open circuit voltage: 21.5V
- Maximum power current (IMP): 1.16A
- Maximum power voltage: 17.2V
- Connection: 0.5m bare end fly lead
- Dimensions: 410 x 351 x 18 mm
- Operating temperature: -40° to +85°C
|
|
This quality 20W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. The compact size makes it perfect for battery maintenance in low power equipment. |
 |
M8648 |
|
|
|
Turns an Anderson output into a USB charger and car accessory socket for powering devices. Max 2.1A current per USB port. |
 |
M8050 |
|
- Isolated design for maximum electrical safety
- Modified sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan
|
|
This compact 150W modified sine wave power inverter is ideal for providing AC power to appliances whilst away from mains power. |
 |
N2015 |
|
- Utilises Maximum Power Point Tracking (MPPT) circuitry
- Multi chemistry for lead acid batteries
- Over temperature & short circuit protection
- Under input voltage shutdown
- Battery under voltage shutdown
- Fully sealed IP67 rated design
- Suits 12V battery systems.
|
|
This compact IP67 weatherproof module provides MPPT solar charging for lead acid batteries. Maximum Power Point Tracking (MPPT) circuitry to provide up to 20% additional charge energy than conventional regulators. |
 |
D0515A
|
|
- Perfect for travel and in the home
- MagSafe Charging Function for iPhone 12 or later
- Qi Wireless Charging Function for Qi compatible devices
- USB Charge lead for powerbank included
- Easy to charge phone if out of reach from mains
- Doesn't need a USB lead to charge if your phone has wireless charge capabilities
|
|
This wireless charging battery bank allows you to charge your phone wirelessly and more conveniently as you simply place your Qi - enabled smartphone on the powerbank. |
 |
M8070A |
|
- Output power: 150W
- Surge power: 450W
- Output voltage: 230V AC @ 50Hz
- Output wave form: Modified sine wave
- DC input voltage: 12V DC nominal
- Efficiency (typical): 90%
- No-load current draw: <0.5A
- Low battery shutdown: 10 ± 0.5V
- High battery shutdown: 15.5 ± 0.5V
- Alarm & thermal shutdown: 60 ± 0.5°C
- Short circuit protection: Yes
- Dimensions (mm): 135L x 60W x 60H
- Net weight: 0.4kg
|
|
Designed in the shape of a soft drink can, this compact inverter mounts snugly in your vehicle's cup/drink holder. |
 |
M8051 |
|
- Isolated design for maximum electrical safety
- Modified sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan
|
|
This compact 300W modified sine wave power inverter is ideal for providing AC power to appliances whilst away from mains power. |
Powerhouse