| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
Microphone/Line Pre Amplifier WallplateA4931V |
|
| This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub. | |
 |
3 Pin XLR Balanced & Stereo RCA Output UTP...A4826 |
|
| This 3 pin XLR Balanced and Stereo RCA output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). | |
 |
Phantom Powered Choir MicrophoneC0356 |
|
| This cardioid microphone is designed to be mounted from ceilings in installations such as churches where greater noise isolation is required. Low profile design and flexible cable hanger provide for diverse mounting options and minimum visibility. Phant | |
 |
Boundary Mic Pro ElectretC0351A |
|
| This boundary microphone is designed to be surface mounted and is fitted with a high sensitivity electret insert. The sturdy diecast case and steel grille offers robust protection, while the rubber base plate minimises vibration pickup. A front panel on/o | |
 |
4 Zone Paging Relay Box To Suit A4660A4489A |
|
| The A4489A zone relay unit may be installed remotely and has been designed to switch either low level inputs or amplifier outputs and interfaces the A4660 paging console with existing PA systems. Suits for line level or 100V line zone switching. | |
 |
4 Zone Compact Paging Relay Box To Suit Re...A4469 |
|
| The A4469 zone relay unit may be installed remotely and has been designed to switch either low level inputs or amplifier outputs and interfaces the A4660 paging console with existing PA systems. | |
 |
RS485 Serial 100V Line AttenuatorA6507 |
|
| This compact module includes a seven step 100V line speaker attenuator/volume control which can be remotely adjusted via RS 485 serial control. | |
 |
Stereo RCA and 3.5mm Jack Input UTP Balun ...A4821 |
|
| This Stereo RCA and 3.5mm Jack Wallaplate can be used in a stand-alone point to point basis, allowing signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). | |
 |
Stereo RCA Jack Output UTP Balun WallplateA4828 |
|
| This Stereo RCA Jack output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). | |
 |
1U 19" Dual Gooseneck LED Lamp Rack PanelH5195 |
| This recessed rack mounting dual gooseneck light is ideal for illuminating equipment within a rack. The flexible goosenecks enables the light to be directed where desired. It includes an inbuilt dimmer to adjust the light intensity. Goosenecks length app | ||
 |
Gooseneck Supermarket Paging MicrophoneC0327 |
|
| This incredibly sturdy all metal microphone is built to survive the rigours of supermarkets & fast food restaurants. | |
 |
Mic/Line Pre-Amplifier to Line Level Out C...A4905 |
|
| This line pre-amp will accept either a microphone or auxiliary input and convert it to a balanced high level signal suitable for distribution up to 500M without interference with up to 3V of output level available. Volume controls are provided for both inputs plus a master volume control. The microphone is a balanced XLR input whilst the auxiliary | |
 |
3 Pin XLR Cat5 Extender (Transmitter)A4940 |
|
| Allows balanced signals to be transmitted over long distances using economical UTP data cabling. | |
 |
3 Pin XLR Cat5 Extender (Receiver)A4942 |
|
| The Redback® A 4942 receives audio from compatible Redback® Cat5e/6 transmitters and converts the signal to a balanced XLR output. The output level is DIP switch selectable, and the ouput volume is screwdriver adjusted via the trimpot on the front of the unit. | |
 |
RCA to Cat5 Extender (Transmitter)A4944 |
| The Redback® A 4944 provides a convenient way to send line level RCA audio signals over long distances via Cat5/6 cabling. The unit has DIP switch selectable input sensitivities of 100mV and 1V to handle inputs of varying levels. | ||
 |
RCA to Cat5 Extender (Receiver)A4946 |
| The Redback A 4946 receives audio from compatible Redback Cat5e/6 transmitters, converts the signal to line level and outputs to RCA and 3.5mm connectors. | ||
 |
Paging Microphone Chime ModuleA4950 |
|
| By adding this module inline with a paging microphone pre and post announcement chimes can be added to the audio signal. | |
 |
Line Level Compressor/LimiterA4948 |
|
| This compact module is designed to go inline with an audio input source like CD/Blu-Ray etc to the input of a mixer or amplifier. It maintains a constant level to the mixer/amp regardless of the amplitude of the input signal. | |
 |
3 Pin XLR Transmitter WallplateA4941 |
|
| This handy interface wallplate allows balanced signals to be transmitted over long distances using economical UTP data cabling. | |
 |
5 Pin XLR Transmitter WallplateA4953 |
|
| This handy interface wallplate allows balanced signals to be transmitted over long distances using economical UTP data cabling. | |
 |
5 Pin XLR Cat5 Extender (Transmitter)A4952 |
| This handy interface box allows balanced signals to be transmitted over long distances using economical UTP data cabling, and provides easy local zone connection for audio sources. | ||
 |
5 Pin XLR Cat5 Extender (Receiver)A4954 |
| The Redback® A 4954 receives audio from compatible Redback® Cat5e/6 transmitters and converts the signal to a balanced XLR output with PTT connection. | ||
 |
Wireless UHF Beltpack Transmitter 700 ChannelC8893D |
|
| Beltpack transmitter ideal for use with the Redback 700 channel receiver unit (C 8890D). | |
 |
3 Pin XLR Line/Balanced Input UTP Balun Wa...A4820 |
|
| This 3 pin XLR Line/Balanced input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). | |
 |
Stereo RCA Input UTP Balun WallplateA4822 |
|
| This Stereo RCA input wallplate can be used in a stand-alone point to point basis, allowing signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). |
100% developed, designed & assembled in Australia.
Backed by an industry leading 10 Year Manufacturer Warranty.