Microphones
| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
Windsock to suit C8914C0348 |
| Spare windsock to suit | ||
 |
10mm Pencil Microphone WindsockC0345 |
| Used to negate breath noise and eliminate wind or breath “pop”. | ||
 |
27mm Medium Microphone WindsockC0342 |
| Used to negate breath noise and eliminate wind or breath “pop”. | ||
 |
20mm Pencil Microphone WindsockC0340 |
| Used to negate breath noise and eliminate wind or breath 'pop' | ||
 |
8mm Windsock To Suit C8911AC0338 |
| This windsock is designed specifically to suit C8911A headband microphone and is sold as both a spare part and as a generic unit. | ||
 |
12mm Lapel Microphone WindsockC0337 |
| Used to negate breath noise and eliminate wind or breath "pop". This windsock is designed specifically to suit our lapel microphone and is sold as both a spare part and as a generic unit. | ||
 |
CB Type Microphone Mounting ClipC0336 |
| Microphone clip to suit the C 0333/C 0334 / C 0335 range of CB microphones. | ||
 |
40mm Ball Microphone WindsockC0344 |
| Used to negate breath noise and eliminate wind or breath “pop”. | ||
 |
Windsock to suit C0375C0346 |
| Used to negate breath noise and eliminate wind or breath "pop". Size refers to inside diameter of windsock opening.7mm | ||
 |
Windsock to suit C9064 Altronics Aviation ...C0341 |
| Used to negate breath noise and eliminate wind or breath 'pop'. | ||
 |
Black Gooseneck Microphone BaseC0421 ROHS |
| Has a 5/8" male thread one end and 5/8" female thread other end. Screws included. Black base | ||
 |
Natural Gooseneck Microphone BaseC0420 |
| Has a 5/8" male thread one end and 5/8" female thread other end. Screws included. Chrome base | ||
 |
Spring Loaded Microphone HolderC0405 |
| Spring loaded mic holder, uses 5/8" thread to enable direct fitting to most mic stands and goosenecks. | ||
 |
22mm Flexible Microphone HolderC0402 |
| Designed to suit narrow bodied hard wired mics. Uses standard 5/8" thread to enable direct fitting to most mic stands and goosenecks. Features flexible plastic to allow the accommodation of a variety of microphone sizes. | ||
 |
Microphone HolderC0401 |
| Standard type mic holder, uses 5/8" thread to enable direct fitting to most mic stands and goosenecks. | ||
 |
Microphone Mini Tripod StandC0491 |
| Mic stand has fold in legs and stands 86mm high when extended. With standard 5/8" thread. | ||
 |
Large Wireless Microphone HolderC0404 ROHS |
| Designed to suit large radio mics. Uses standard 5/8" thread to enable direct fitting to most mic stands and goosenecks. Features flexible plastic to allow the accommodation of a variety of microphone sizes. | ||
 |
Windsock to suit C0361C0347 |
| Used to negate breath noise and eliminate wind or breath “pop”. Suits C 0361 shotgun microphone. | ||
 |
Black desk Mount XLR Microphone SocketC0431 ROHS |
| Incorporates a 3 pin XLR socket for mounting gooseneck microphones. Screws directly to a desk or bench top making a neat and simple installation. Black. | ||
 |
330mm Natural Gooseneck Microphone ExtensionC0410 |
| Microphone gooseneck incorporating 5/8" thread male to female. Matching bench mount bases C 0420/21. 300mm Chrome. | ||
|
450mm Natural Gooseneck Microphone ExtensionC0412 |
| Microphone gooseneck incorporating 5/8" thread male to female. Matching bench mount bases C 0420/21. 450mm Chrome. | ||
 |
300mm Black Gooseneck Microphone ExtensionC0411 |
| Microphone gooseneck incorporating 5/8" thread male to female. Matching bench mount bases C 0420/21. 300mm Black. | ||
 |
Carry Bag To Suit Microphone Floor StandsC0513 |
| Heavy duty nylon zip lock bag specially designed to protect your microphone stands from the rough treatment dished out by life on the road. Features a convenient adjustable carry strap. | ||
 |
3 pin XLR Horizontal Steel Microphone Wall...C0442 |
| 3 Pin Horizontal Mount Stainless Steel Plates with 1 x XLR skt | ||
|
450mm Black Gooseneck Microphone ExtensionC0413 |
| Microphone gooseneck incorporating 5/8" thread male to female. Matching bench mount bases C 0420/21. 450mm Black. | ||
 |
3 Microphone Holder CrossbarC0400 |
| Enables 3 microphones to be mounted on a single mic stand. Simply screws on to the 5/8” thread then the mic holders screw to the crossbar. | ||
 |
3 pin XLR Horizontal Microphone WallplateC0446A |
|
| 3pin XLR microphone connector mounted horizontally on a dual face wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | |
 |
3 Pin XLR Horizontal Microphone WallplateC0444 |
|
| 3pin XLR microphone connector mounted horizontally on a dual face wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | |
 |
Black 3 pin XLR Horizontal Microphone Wall...CB0446 |
|
| 3pin XLR microphone connector mounted horizontally on a HPM wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | |
 |
5 pin XLR Horizontal Microphone WallplateC0456A |
|
| 5pin XLR microphone connector mounted horizontally on a dual face wall plate. "One-Shot" versions with screw terminal connections for quick and easy connection on site. | |
 |
Black 5 pin XLR Horizontal Microphone Wall...CB0456 |
|
| 5pin XLR microphone connector mounted horizontally on a HPM wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | |
 |
3 pin XLR Dual Horizontal Steel Microphone...C0447 |
| 3 Pin Horizontal Mount Stainless Steel Plates with 2 x XLR skts | ||
 |
CB Type Microphone With Bare EndsC0333 |
| Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord (including switch pair). Suitable for CB's, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz (C 0334), 300Hz - 6kHz (C 0335) | ||
 |
Microphone Stand Tripod W/HolderC0493 |
| Robust mic stand with fold-up legs and adjustable centre stem. With standard 5/8" thread and mic holder. Height adjustable from 95mm to 150mm. | ||
 |
CB Type Curly 0.75m Microphone Lead With B...C0330B |
| 0.75m curly cable to suit CB fist type microphone. Bare end connection for terminating to OEM equipment or with the connector of your choice. | ||
 |
Gooseneck Shock Mount Microphone BaseC0484 |
| Flush mount friction fit gooseneck base. Suitable for C 0410-C 0413 goosenecks. Mounting hole size: 50.5mm. | ||
 |
Dual 3 Pin XLR Horizontal Microphone Wallp...C0448 |
|
| Dual 3pin XLR microphone connectors mounted horizontally on a dual face wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | |
 |
Dual 3 Pin XLR Horizontal Microphone Wallp...CB0448 |
|
| Dual 3pin XLR microphone connectors mounted horizontally on a dual face wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | |
 |
3 pin XLR Wallplate with Microphone ClipC0449 |
|
| This 3 Pin XLR wall plate are fitted with a clip for holding. fist type CB microphones. | |
 |
3 Pin XLR Microphone Shock Mount BaseC0482 |
| The elegant modern design of this base makes it ideal for use in conference rooms, board rooms, podiums, pulpits, etc. The rubber suspension of the XLR socket minimises shock or mechanical noise being transmitted to the microphone. | ||
 |
5 pin XLR White Wallplate with Microphone ...C0458 |
|
| This 5 Pin XLR wall plate are fitted with a clip for holding. fist type CB microphones. | |
 |
5 Pin XLR Black Wallplate With Microphone ...CB0458 |
|
| This 5 Pin XLR wall plate are fitted with a clip for holding fist type CB microphones. | |
 |
CB Type Balanced Microphone With Bare EndsC0335 |
| Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord 2m (including switch pair). Suitable for CB''''s, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz | ||
 |
Microphone Desk StandC0500 |
| Diecast base, telescopic height adjustment from 220mm to 380mm. Weight 1.4kg. 5/8" mic holder threaded adaptor included. | ||
 |
3 pin XLR Horizontal Microphone Wallplate ...PC0446 NEW |
| 3pin XLR microphone connector mounted horizontally on a Clipsal pro wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | ||
 |
5 pin XLR Horizontal Microphone Wallplate ...PC0456 NEW |
| 5pin XLR microphone connector mounted horizontally on a Clipsal pro wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | ||
 |
3 pin XLR Black Horizontal Microphone Wall...PC0446B NEW |
| 3pin XLR microphone connector mounted horizontally on a Clipsal pro wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | ||
 |
5 pin XLR Black Horizontal Microphone Wall...PC0456B NEW |
| 5pin XLR microphone connector mounted horizontally on a Clipsal pro wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | ||
 |
5 Pin XLR CB Type Balanced MicrophoneC0334 |
| Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord (including switch pair). Suitable for CB's, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz (C 0334), 300Hz - 6kHz (C 0335) | ||
 |
Lapel Condenser MicrophoneC0398 |
|
| A miniature electret lapel microphone with integral clip. Supplied with a balanced lead with mini 3 pin XLR plug. Features excellent pickup characteristics, dynamic range and requires phantom power (see C 0358). Perfect for lecturers, spruikers, presente |
Designed & manufactured in Australia.
Backed by an industry leading 10 Year Manufacturer Warranty.
