Microphones
| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
22mm Flexible Microphone HolderC0402 |
| Designed to suit narrow bodied hard wired mics. Uses standard 5/8" thread to enable direct fitting to most mic stands and goosenecks. Features flexible plastic to allow the accommodation of a variety of microphone sizes. | ||
 |
3 Microphone Holder CrossbarC0400 |
| Enables 3 microphones to be mounted on a single mic stand. Simply screws on to the 5/8” thread then the mic holders screw to the crossbar. | ||
 |
Lapel Condenser MicrophoneC0398 |
|
| A miniature electret lapel microphone with integral clip. Supplied with a balanced lead with mini 3 pin XLR plug. Features excellent pickup characteristics, dynamic range and requires phantom power (see C 0358). Perfect for lecturers, spruikers, presente | |
 |
Drop-Proof 600 Ohm Handheld MicrophoneC0383 ROHS |
|
| This balanced microphone has a specially designed grill that can withstand a drop impact without losing its shape. The tough zinc diecast housing has an inbuilt 3 pin XLR male connector and on/off switch. It is supplied complete with 5m twin shielded bala | |
 |
5 Pin XLR Desk Paging MicrophoneC0379 |
|
| This desk microphone has a tapered low frequency response for articulate speech reproduction and enhanced clarity. Fitted with a 2 metre lead and terminated with 5 pin XLR connector. Includes a PTT mute switching pair. | |
 |
3 Pin XLR Desk Paging MicrophoneC0377 |
|
| This desk microphone has a tapered low frequency response for articulate speech reproduction and enhanced clarity. Fitted with a 2 metre lead and terminated with either a 3 pin XLR, 5 pin XLR or 5 pin DIN connector. The 5 pin XLR and 5 pin DIN type conn | |
 |
Desk Paging Microphone PTT/PTLC0375 |
|
| An elegant, stylish, slimline unobtrusive desk-mount paging microphone equipped with a 3 pin balanced XLR lead. Features switchable flat or rolloff response to eliminate low frequency pickup. May also be switched to operate as push to talk or push to lock | |
 |
Dynamic Lectern MicrophoneC0373 |
|
| This microphone features outstanding speech intelligibility, feedback rejection and user sound insolation. Complete with flexible gooseneck and built in 3 pin male XLR connector, this is ideal for lecterns, custom paging consoles, church pulpits and some | |
 |
Lectern Dynamic Low Impedance MicrophoneC0370 |
|
| This microphone features speech tailored frequency response with excellent noise isolation and feedback rejection. Complete with flexible gooseneck and built in 3 pin male XLR connector, this is ideal for lecterns, custom paging consoles, church pulpits a | |
 |
Redback Phantom Powered Lectern MicrophoneC0369 ROHS |
|
| This elegant gooseneck microphone features smooth, brilliant sound with excellent ambient noise control and feedback rejection. It is ideal for installations requiring the use of a high performance non-obtrusive microphone. The slimline design of this mic | |
 |
Dynamic Screw Mount Gooseneck MicrophoneC0363 |
|
| This elegant gooseneck microphone features smooth, brilliant sound with excellent ambient noise control and feedback rejection. It's screw base is suitable for mounting on equipment or permanent desk mounting . The slimline design of this mic makes it id | |
 |
Electret Shotgun MicrophoneC0361 |
|
| This shotgun mic is designed to plug directly into a desk mount XLR socket. The line + gradient pattern provides an extremely tight unidirectional pickup and high rejection of back & side signals. It features a section of flexible gooseneck for angle adju | |
 |
Phantom Power Supply with Mini XLRC0358 |
| Powered by 1 AA battery, this module provides phantom power for mics equipped with a 3 pin mini XLR plug. A handy 'bass cut' switch is provided, giving the user ability to reduce breath and movement noise. It provides a standard 3 pin XLR output for conne | ||
 |
Phantom Powered Choir MicrophoneC0356 |
|
| This cardioid microphone is designed to be mounted from ceilings in installations such as churches where greater noise isolation is required. Low profile design and flexible cable hanger provide for diverse mounting options and minimum visibility. Phant | |
 |
Windsock to suit C8914C0348 |
| Spare windsock to suit | ||
 |
Windsock to suit C0361C0347 |
| Used to negate breath noise and eliminate wind or breath “pop”. Suits C 0361 shotgun microphone. | ||
 |
Windsock to suit C0375C0346 |
| Used to negate breath noise and eliminate wind or breath "pop". Size refers to inside diameter of windsock opening.7mm | ||
 |
10mm Pencil Microphone WindsockC0345 |
| Used to negate breath noise and eliminate wind or breath “pop”. | ||
 |
40mm Ball Microphone WindsockC0344 |
| Used to negate breath noise and eliminate wind or breath “pop”. | ||
 |
27mm Medium Microphone WindsockC0342 |
| Used to negate breath noise and eliminate wind or breath “pop”. | ||
 |
20mm Pencil Microphone WindsockC0340 |
| Used to negate breath noise and eliminate wind or breath 'pop' | ||
 |
8mm Windsock To Suit C8911AC0338 |
| This windsock is designed specifically to suit C8911A headband microphone and is sold as both a spare part and as a generic unit. | ||
 |
12mm Lapel Microphone WindsockC0337 |
| Used to negate breath noise and eliminate wind or breath "pop". This windsock is designed specifically to suit our lapel microphone and is sold as both a spare part and as a generic unit. | ||
 |
CB Type Microphone Mounting ClipC0336 |
| Microphone clip to suit the C 0333/C 0334 / C 0335 range of CB microphones. | ||
 |
CB Type Balanced Microphone With Bare EndsC0335 |
| Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord 2m (including switch pair). Suitable for CB''''s, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz |
