| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
UHF Wireless Beltpack Transmitter 640-664M...C7195B |
|
| Beltpack transmitter. 640-664MHz. Please ensure your system is compatible with this frequency before making your purchase. | |
 |
Desk Paging Microphone PTT/PTLC0375 |
|
| An elegant, stylish, slimline unobtrusive desk-mount paging microphone equipped with a 3 pin balanced XLR lead. Features switchable flat or rolloff response to eliminate low frequency pickup. May also be switched to operate as push to talk or push to lock | |
 |
Wireless UHF Handheld Condenser Mic 700 Ch...C8892D |
|
| Wireless handheld 700 channel microphone ideal for use with the Redback 700 channel receiver unit (C 8890D). | |
 |
2 Input Mini Mixer With Vox MutingA4911 |
|
| This compact 2 input mixer which accepts either a line level signal or balanced microphone signal for each input. The output signal is suitable for feeding an amplifier with either a line level input or balanced microphone input. Input one will vox mute i | |
 |
Balanced Microphone/Line Pre AmplifierA4932 |
|
| This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub. | |
 |
Megaphone PA Public Address 25W (35W Max) RedA1980B |
|
| A traditional hand held megaphone or bullhorn for announcing. Suitable for sports rallies, school carnivals, conventions, demonstrations etc. Includes inbuilt electronic siren for gaining instant attention. Light weight and easy to use. Up to 100m in ideal conditions. | |
 |
Wireless UHF Beltpack Mic 700 ChannelC8893B |
|
| Beltpack transmitter ideal for use with the Redback 700 channel receiver unit (C 8890B). | |
 |
9U 450mm Deep 19" Rack Frame Panel SetH5609 |
|
| These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi | |
 |
3 Pin XLR & Stereo RCA Input UTP Balun Wal...A4824 |
|
| This 3 pin XLR Line/Balanced and Stereo RCA input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). | |
 |
Zone Status Interface To Suit A4567A4568 |
|
| Designed to interface the A4567 Line monitoring unit with a fire indicator board. The addition of the A4568 enables you to monitor the status of each individual zone. | |
 |
Microphone/Line Pre Amplifier WallplateA4931 |
|
| This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub. | |
 |
5 Pin XLR PTT Microphone Wallplate UTP Tra...A5138 |
|
| The A5138 UTP wall plate has a standard 5 Pin XLR connector for connection of microphones with PTT switches. | |
 |
Microphone/Line Pre Amplifier WallplateA4931V |
|
| This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub. | |
 |
3 Pin XLR Balanced & Stereo RCA Output UTP...A4826 |
|
| This 3 pin XLR Balanced and Stereo RCA output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). | |
 |
Phantom Powered Choir MicrophoneC0356 |
|
| This cardioid microphone is designed to be mounted from ceilings in installations such as churches where greater noise isolation is required. Low profile design and flexible cable hanger provide for diverse mounting options and minimum visibility. Phant | |
 |
Boundary Mic Pro ElectretC0351A |
|
| This boundary microphone is designed to be surface mounted and is fitted with a high sensitivity electret insert. The sturdy diecast case and steel grille offers robust protection, while the rubber base plate minimises vibration pickup. A front panel on/o | |
 |
4 Zone Compact Paging Relay Box To Suit Re...A4469 |
|
| The A4469 zone relay unit may be installed remotely and has been designed to switch either low level inputs or amplifier outputs and interfaces the A4660 paging console with existing PA systems. | |
 |
RS485 Serial 100V Line AttenuatorA6507 |
|
| This compact module includes a seven step 100V line speaker attenuator/volume control which can be remotely adjusted via RS 485 serial control. | |
 |
Stereo RCA and 3.5mm Jack Input UTP Balun ...A4821 |
|
| This Stereo RCA and 3.5mm Jack Wallaplate can be used in a stand-alone point to point basis, allowing signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). | |
 |
Stereo RCA Jack Output UTP Balun WallplateA4828 |
|
| This Stereo RCA Jack output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). | |
 |
Mic/Line/100V Input to Line +24V Switched ...A4906 |
|
| The A 4906 is a versatile unit which accepts either a line level signal, balanced microphone signal or 100V input signal. The output signal is a line level signal suitable for feeding into an amplifier. | |
 |
1U 19" Dual Gooseneck LED Lamp Rack PanelH5195 |
| This recessed rack mounting dual gooseneck light is ideal for illuminating equipment within a rack. The flexible goosenecks enables the light to be directed where desired. It includes an inbuilt dimmer to adjust the light intensity. Goosenecks length app | ||
 |
Gooseneck Supermarket Paging MicrophoneC0327 |
|
| This incredibly sturdy all metal microphone is built to survive the rigours of supermarkets & fast food restaurants. | |
 |
Mic/Line Pre-Amplifier to Line Level Out C...A4905 |
|
| This line pre-amp will accept either a microphone or auxiliary input and convert it to a balanced high level signal suitable for distribution up to 500M without interference with up to 3V of output level available. Volume controls are provided for both inputs plus a master volume control. The microphone is a balanced XLR input whilst the auxiliary | |
 |
3 Pin XLR Cat5 Extender (Transmitter)A4940 |
|
| Allows balanced signals to be transmitted over long distances using economical UTP data cabling. |
Designed & manufactured in Australia.
Backed by an industry leading 10 Year Manufacturer Warranty.