Redback
| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
Phantom Powered Choir MicrophoneC0356 |
|
| This cardioid microphone is designed to be mounted from ceilings in installations such as churches where greater noise isolation is required. Low profile design and flexible cable hanger provide for diverse mounting options and minimum visibility. Phant | |
 |
Boundary Mic Pro ElectretC0351A |
|
| This boundary microphone is designed to be surface mounted and is fitted with a high sensitivity electret insert. The sturdy diecast case and steel grille offers robust protection, while the rubber base plate minimises vibration pickup. A front panel on/o | |
 |
4 Zone Compact Paging Relay Box To Suit Re...A4469 |
|
| The A4469 zone relay unit may be installed remotely and has been designed to switch either low level inputs or amplifier outputs and interfaces the A4660 paging console with existing PA systems. | |
 |
RS485 Serial 100V Line AttenuatorA6507 |
|
| This compact module includes a seven step 100V line speaker attenuator/volume control which can be remotely adjusted via RS 485 serial control. | |
 |
30W 2 Way 8 Ohm/100V White Wall Speakers PairC0946 |
|
| Offers the flexibility for 8 ohm domestic use or 100V line for commercial installations. These stylish wall speakers deliver high quality sound for music and sound reinforcement in both domestic and commercial installations. Ideal for entertaini | |
 |
30W 8 Ohm 100V Wall Mount White Speaker PairC0902B NEW |
|
| These wall mount music speakers feature exceptional sound quality for both domestic and commercial applications and PA sound reinforcement. | |
 |
30W 8 Ohm 100V Wall Mount Black Speaker PairC0903B NEW |
|
| These wall mount music speakers feature exceptional sound quality for both domestic and commercial applications and PA sound reinforcement. | |
 |
254mm 10 Inch 120W 2 Way Club Series PA Sp...C0992 |
|
| Available in sizes from 8" to 15", these speakers are housed in rugged wedge shaped nylon fibre and ABS moulded cabinets. Designed with portability in mind. | |
 |
Mic/Line/100V Input to Line +24V Switched ...A4906 |
|
| The A 4906 is a versatile unit which accepts either a line level signal, balanced microphone signal or 100V input signal. The output signal is a line level signal suitable for feeding into an amplifier. | |
 |
Gooseneck Supermarket Paging MicrophoneC0327 |
|
| This incredibly sturdy all metal microphone is built to survive the rigours of supermarkets & fast food restaurants. | |
 |
Mic/Line Pre-Amplifier to Line Level Out C...A4905 |
|
| This line pre-amp will accept either a microphone or auxiliary input and convert it to a balanced high level signal suitable for distribution up to 500M without interference with up to 3V of output level available. Volume controls are provided for both inputs plus a master volume control. The microphone is a balanced XLR input whilst the auxiliary | |
 |
Handheld 1KHz Audio Signal GeneratorQ2014 |
|
| Compact and portable, this handheld battery powered 1KHz tone generator has been designed to test PA systems and in particular hearing loop induction sound systems. The unit produces a 1KHz tone which is fed into the input of the amplifier under test. Two output levels are provided, 100mV and 1V. Includes 9V battery. Size: 79W x 117H x 24Dmm. | |
 |
30W 100V EWIS IP67 Plastic PA Horn SpeakerC2047 |
|
| The REDBACK C 2047 is specifically designed for applications with a high level of dust or moisture in the operating environment. The speaker is compliant with IP67 dust and hose-proof standard. Made from tough UV stabilised ABS. Ideal for outdoor public address requirements. | |
 |
3 Pin XLR Cat5 Extender (Transmitter)A4940 |
|
| Allows balanced signals to be transmitted over long distances using economical UTP data cabling. | |
 |
3 Pin XLR Cat5 Extender (Receiver)A4942 |
|
| The Redback® A 4942 receives audio from compatible Redback® Cat5e/6 transmitters and converts the signal to a balanced XLR output. The output level is DIP switch selectable, and the ouput volume is screwdriver adjusted via the trimpot on the front of the unit. | |
 |
RCA to Cat5 Extender (Transmitter)A4944 |
| The Redback® A 4944 provides a convenient way to send line level RCA audio signals over long distances via Cat5/6 cabling. The unit has DIP switch selectable input sensitivities of 100mV and 1V to handle inputs of varying levels. | ||
 |
RCA to Cat5 Extender (Receiver)A4946 |
| The Redback A 4946 receives audio from compatible Redback Cat5e/6 transmitters, converts the signal to line level and outputs to RCA and 3.5mm connectors. | ||
 |
Paging Microphone Chime ModuleA4950 |
|
| By adding this module inline with a paging microphone pre and post announcement chimes can be added to the audio signal. | |
 |
Line Level Compressor/LimiterA4948 |
|
| This compact module is designed to go inline with an audio input source like CD/Blu-Ray etc to the input of a mixer or amplifier. It maintains a constant level to the mixer/amp regardless of the amplitude of the input signal. | |
 |
3 Pin XLR Transmitter WallplateA4941 |
|
| This handy interface wallplate allows balanced signals to be transmitted over long distances using economical UTP data cabling. | |
 |
5 Pin XLR Transmitter WallplateA4953 |
|
| This handy interface wallplate allows balanced signals to be transmitted over long distances using economical UTP data cabling. | |
 |
5 Pin XLR Cat5 Extender (Transmitter)A4952 |
| This handy interface box allows balanced signals to be transmitted over long distances using economical UTP data cabling, and provides easy local zone connection for audio sources. | ||
 |
5 Pin XLR Cat5 Extender (Receiver)A4954 |
| The Redback® A 4954 receives audio from compatible Redback® Cat5e/6 transmitters and converts the signal to a balanced XLR output with PTT connection. | ||
 |
Stereo RCA to RCA Pre AmpliferA4956 |
|
| The Redback® A 4956 is a compact stereo line level amplifier, ideal for boosting low-level RCA audio signals from devices such as tablets and smartphones when connecting to PA audio systems. | |
 |
Wall Mount PA Horn Speaker Vandal Resistan...C2054 |
| Constructed from galvanised mesh this enclosure has been designed to protect the enclosed horn/speaker from physical damage or theft. The robust design makes it ideal for use in schoolyards, undercroft etc. |
100% developed, designed & assembled in Australia.
Backed by an industry leading 10 Year Manufacturer Warranty.