|
Description |
Downloads |
Specs |
Ordering |
|
|
C2062 |
|
-
- Backed by an industry leading 5 Year Speaker Performance Warranty.
- This speaker is covered by our 5 Year speaker performance warranty. Redback PA drivers are engineered and manufactured to stringent specifications ensuring maximum reliability under all operating conditions. Each driver has a power rating well above the max tapping of the transformer, ensuring reliable operation and excellent longevity.
|
|
Reflex horn speakers are ideally suited for open air paging applications where speech clarity is of prime importance. |
|
C2260 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Stylish finish with rust free aluminium grille.
- White RAL9003 mesh grille.
- Low profile design is only 65mm deep - penetrates ceiling by only 53mm (with 12mm thickness ceiling tile).
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Designed to meet AS ISO7240.24:2018. Our first One-Shot speaker with a aluminium grille, this model has been designed for installations requiring a premium finish whilst still meeting the required fire standards. It can also be used for standard 100V PA/BGM installations. |
|
C2138 |
|
- Speaker driver: C 2120A
- Power Taps : 1.25, 2.5, 5, 10, 15 Watts
- Frequency Response: 45Hz-20kHz
- Resonant Frequency: 50Hz
- SPL 1W @ 1m: 91dB
- Terminal type: 4-way screw terminal & 22µF bipolar capacitor
- Tweeter Voice Coil Ø: 13mm
- Driver Voice Coil Ø: 25mm
- Ceiling cutout: 246mmØ
- Mounting depth: 94mm
- Transformer cover: No
- Cable restraint: No
|
|
Redback "One-Shot" speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. |
|
C0936 |
|
- Horizontal or vertical mounting
- Ball joint angle adjustment
- Dual 4” woofer drivers with 3/4” titanium dome tweeter
- Ideal for BGM & general sound reinforcement
- Stylish glossy finish & enclosure design for upmarket bars, boutiques and venues
|
|
These stylish wall speakers deliver high quality sound for music and sound reinforcement. Ideal for entertaining areas at home or boutiques, cafes, pubs & clubs in professional installations. Connection is via spring terminals on rear. Aluminium grille & stainless steel hardware offer rust free performance in even the most demanding environments. |
|
C3602 |
|
|
|
These sockets mount to the bottom of a speaker box, enabling a strong and sturdy mount for a speaker stand. Suits 35 dia.mm stand. Metal |
|
C2133 |
|
- Power Taps: 0.33, 0.66, 1.25 , 2.5, 5W
- Frequency Response: 100Hz- 15kHz
- Size: 200mm
- SPL (1W @ 1M): 93dB
- Hole Cutout (Ø): 246mm
- Connection: 2 way terminal block
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
Super fast installation & excellent speech intelligibility. Redback "One-Shot" speaker units install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings fo |
|
C0938 |
|
- Horizontal or vertical mounting
- Ball joint angle adjustment
- Dual 4” woofer drivers with 3/4” titanium dome tweeter
- Ideal for BGM & general sound reinforcement
- Stylish glossy finish & enclosure design for upmarket bars, boutiques and venues
- Available in 8 ohm or 100V line multi-tap versions.
|
|
These stylish wall speakers deliver high quality sound for music and sound reinforcement. Ideal for entertaining areas at home or boutiques, cafes, pubs & clubs in professional installations. Connection is via spring terminals on rear. Aluminium grille & stainless steel hardware offer rust free performance in even the most demanding environments. |
|
K9645 NEW
|
|
|
|
An assortment of right 1.25mm pitch angle boxed PCB connectors and matching plugs in 2, 3, 4 and 5 way varieties. |
|
C0937 |
|
- Horizontal or vertical mounting
- Ball joint angle adjustment
- Dual 4” woofer drivers with 3/4” titanium dome tweeter
- Ideal for BGM & general sound reinforcement
- Stylish glossy finish & enclosure design for upmarket bars, boutiques and venues
|
|
These stylish wall speakers deliver high quality sound for music and sound reinforcement. Ideal for entertaining areas at home or boutiques, cafes, pubs & clubs in professional installations. Connection is via spring terminals on rear. Aluminium grille & stainless steel hardware offer rust free performance in even the most demanding environments. |
|
C2136 |
|
- Power Taps: 1.25, 2.5, 5, 10, 15W
- Frequency Response: 100Hz- 15kHz
- SPL (1W @ 1M): 90dB
- Size: 200mm
- Hole Cutout (Ø): 246mm
- Connection: 2 way terminal block
|
|
Redback "One-Shot" speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. |
|
C1000C |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. Can be connected via Speakon. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
|
C1002B |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. This active model features balanced XLR input. All active models allow the music signal to be daisychained to extra speakers. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
|
C3640 |
|
|
|
Unique adjustable telescopic design makes tuning and building speaker cabinets faster and easier. Complete unit simply screws against the speaker cabinet panel. Extension component can be secured into place. |
|
C0994 |
|
- 2 x Balanced XLR mic input
- 1 x Balanced 6.35mm jack mic input
- TRS 6.35mm stereo jack line input
- USB input for digital audio playback
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion
- Inbuilt top hat mount and carry handle
- Wide frequency response
- Titanium diaphragm compression driver
- Built-in MP3, WAV, WMA file player with USB input
|
|
A high powered active speakers series identical in performance and construction to the unpowered units, each include a self-contained power amplifier. Simply connect 240VAC power and a thumbdrive. |
|
C2260A |
|
- Designed to meet Australian Standard AS ISO7240.24
- Press to fit rubber push through grommet.
- Excellent speech intelligibility
- Low profile design is only 65mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Version of C 2260 with rubber grommets instead of cable glands. Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2170. At only 65mm overall height, these models are ideal for low profile ceiling spaces. |
|
C2169 |
|
- Power taps: 0.33, 0.66, 1.25 , 2.5, 5W
- SPL 1W @ 1m: 92dB @ 1KHz ±2dB
- Freq response: 100Hz - 15kHz
- Ceiling cutout: 140mm Ø
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
This custom designed speaker and transformer combination has been specifically engineered to ensure a wide frequency range and dispersion angle, plus a high sound pressure level (SPL) ensuring excellent music and speech intelligibility. |
|
C1008C |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. Can be connected via SpeakOn. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
|
C0998B |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. This active model features balanced XLR input. All active models allow the music signal to be daisychained to extra speakers. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
|
C0614B |
|
- Sound Pressure Level: 89±2 dBA*
- Resonance Frequency (Fo): 300±20% Hz
- Frequency Range: Fo - 10,000 Hz
- Rated Impedance: 8±15% Ω
- Rated Power: 1.0 W
- Max. Power: 2.0 W
- Magnet: Ø32 x Ø18 x 6 mm Ferrite
- Operating Temperature: -20ºC to 60ºC
- Storage Temperature: -30ºC to 70ºC
- Housing: Metal, 66mm x 66mm
- Depth: 20mm
- Diaphragm Material: Mylar
- Weight: 60g
- * Tested at 0.5m, 1W, 500, 600, 1kHz Average.
|
|
Sound Pressure Level: 89±2 dBA*
Resonance Frequency (Fo): 300±20% Hz
Frequency Range: Fo - 10,000 Hz
Rated Impedance: 8±15% &#937
Rated Power: 1.0 W
Max. Power: 2.0 W
Magnet: Ø32 x Ø18 x 6 mm Ferrite
Operating Temperature: -20ºC to 60ºC
Storage Temperature: -30ºC to 70ºC
Housing: Metal, 66mm |
|
C1006B |
|
- Rugged moulded ABS construction
- Cast aluminium frame bass driver with large voice coil diameter
- Inbuilt top hat mount and carry handle
- Wide frequency response
- Titanium diaphragm compression driver
- 4 rigging points
|
|
A high power design which is suited to bands, DJs and venues where excellent quality, temporary sound is required. In-built carry handles make set up a breeze. Balanced input and output. Adjustable bass, treble & volume. |
|
C2171 |
|
- Electrical
- Power taps: 0.33, 0.66, 1.25, 2.5, 5W
- Impedance: 30kΩ, 15kΩ, 8kΩ, 4kΩ, 2kΩ
- SPL 1W @ 1m: 90dB
- SPL 1W @ 4m: 78dB
- SPL 5W @ 1m: 97dB
- SPL 5W @ 4m: 85dB
- Frequency response: 100Hz-15kHz
- Coverage Angles: 1000Hz 182°, 2000Hz 163°, 4000Hz 77°
- Connection: 4 way terminal block + 22uF bipolar capacitor
- Approval: AS ISO7240.24
- Environmental Type: A (for indoor applications)
- SPL by tappings @ 1m
- 0.33W: 85.2dB
- 0.66W: 88.2dB
- 1.25W: 91.2dB
- 2.5W: 94dB
- 5W: 97dB
- Mechanical
- Material:
- Black flame retardant ABS grille (Taitalac 8540T)
- Black flame retardant ABS spring clips (Cycoloy C2950HF)
- Red flame retardant ABS transformer dome cover (Starex VH-0800)
- Driver construction: Paper cone
- Ceiling cutout: 140mmØ
- Grille diameter: 159mmØ
- Mounting depth: 117mm (including ceiling tile thickness)
- Overall weight: 700g
- Environmental
- Operating temperature: -25°C to +55°C
- Relative humidity: < 95%
- IP Rating: IP21
|
|
Designed to meet AS ISO 7240.24:2018. Considerable development and has been put into this fire announcement system approved version of our popular One-Shot 'Rat-Trap' speaker. Flame retardent design with tuned PA driver to suit the latest approval requirements. |
|
CF0705 |
|
- Designed to meet AS ISO7240.24 standard for fire & evacuation warning systems - NO EXTERNAL EQ REQUIRED.
- Excellent speech intelligibility
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 2 way latching system reduces installation time.
- Fitted with 4 way wire protect terminal block for loop in, loop out wiring as required by Australian Standards.
- Fitted with supervisory capacitor for line monitoring.
- High impact enclosure & grille.
- Australian designed & assembled.
- 5 year warranty.
|
|
A surface mount fire speaker featuring flame retardant housing material and PA Driver to suit the new approval requirements. |
|
C0716 |
|
- Power taps: 0.33, 0.66, 1.25, 2.5, 5W
- Frequency response: 75Hz - 15kHz
- SPL 1W@1m: 93dB
- Connection: 4 way wire protect terminal & 22uF bipolar cap
- Dimensions: 310Ø x 85Hmm.
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
Super Fast Installation. Save Time & Money!
Saving valuable installation time the innovative One-Shot range is moulded from industrial grade, high impact polystyrene and designed to mount directly to the underside of concrete slabs or inacce |
|
C2120A |
|
- Power Taps : 1.25, 2.5, 5, 10, 15 Watts
- Frequency Response: 45Hz-20kHz
- Resonant Frequency: 50Hz
- SPL 1W @ 1m: 91dB
- Terminal type: 4-way screw terminal & 22µF bipolar capacitor
- Tweeter Voice Coil Ø: 13mm
- Driver Voice Coil Ø: 25mm
- Ceiling cutout: 185mmØ
- Mounting depth: 94mm
- Transformer cover: No
- Cable restraint: No
|
|
For applications where high power, high performance sound reproduction is required, ie. bars, boutiques, clubs etc. Supplied with a 15W 100V transformer.
Now with 4 way terminal block & capacitor for Fire/Evac installations! |
|
C1026A |
|
- Frequency Response: 65Hz - 18KHz
- Driver: BML-T804; BMH-V270
- Impedance: 8 ohm
- Directivity Angle: H100°x V80°
- Power: 75W RMS
- Sensitivity: 93dB
- Maximum SPL: 112dB (continuous) 118dB (peak)
- Connector: 2xNL4R
- Dimensions: 285W x 270D x 455Hmm
- Weight: 9.8kg
|
|
This 200mm (8") 75W PA Pro Speaker Pair is part of a new series by Biema. This new range has been engineered using the most advanced acoustic design software. |