|
Description |
Downloads |
Specs |
Ordering |
|
 |
C2181 |
|
- Magnetic fit ‘edge to edge’ steel grille for a neat flush finish.
- High power output.
- Excellent speech intelligibility and music reproduction.
- Coaxial driver for excellent high end frequency response.
- Flip-lock mounting system reduces installation time.
- 5 year warranty.
|
|
The C 2181 is a 200mm (8") 8 amp Omega 45W coaxial speaker. These stylish, high performance, architecturally unobtrusive speaker/grill combinations can be painted to match decor. Super easy to install with a "Flip-Lock&" mounting system. Typical applications |
 |
C2179 |
|
- Size: 165mm
- Colour: White
- Speaker Type: 8 Ohm Coaxial
- Grille: Steel
- Power Taps (Watts): 30W
- Frequency Resp: 65Hz - 20kHz
- SPL 1W@1m: 90dB
- Cutout: 195Ø
|
|
Stylish, high performance, architecturally unobtrusive speaker/grille combinations which can be painted to match decor. Super easy to install. |
 |
C0699A |
|
|
|
The install bracket as used with C 0703A/4A "OneShot" Surface Mount speakers. |
 |
C0704A |
|
- Power taps: 0.33, 0.66, 1.25, 2.5 and 5W
- SPL 1W @ 1m: 90dB
- Freq. Resp.: 100Hz-20kKz
- Connection: 4 way wire protect terminal + 22uF bipolar cap
- Overall Dimensions: 220mmØ x 72mm high.
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
Super Fast Installation. Save Time & Money! Saving valuable installation time the innovative One-Shot range is moulded from industrial grade, high impact polystyrene and designed to mount directly to the underside of concrete slabs. |
 |
C0703A |
|
- Power taps: 0.33, 0.66, 1.25, 2.5 and 5W
- SPL 1W @ 1m: 90dB
- Freq. Resp.: 100Hz-20kKz
- Connection: 4 way wire protect terminal + 22uF bipolar cap
- Overall Dimensions: 220mmØ x 72mm high.
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
Super Fast Installation. Save Time & Money! Saving valuable installation time the innovative One-Shot range is moulded from industrial grade, high impact polystyrene and designed to mount directly to the underside of concrete slabs. |
 |
C5220 |
|
- Rated power: 150W @ 4Ω
- SPL 1W @ 1m:86dB
- Max SPL:108dB
- Freq response:50Hz - 300Hz
- Weight: 12kg
- Dimensions (mm): 310H x 420Ømm
|
|
You may locate C 5220 anywhere you can run speaker wire. |
 |
CB2134VC |
|
- Power taps: 0.33, 0.66, 1.25, 2.5, 5W
- Frequency Response: 75Hz- 15kHz
- SPL (1W @ 1M): 93dB
- Size: 200mm
- Hole Cutout (Ø): 246mm
- Connection: 4 way terminal block + 22uf bipolar capacitor
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
An 8" 200mm One-Shot 100V line PA speaker fitted with a volume control in the middle of the grille. Ideal for use in areas where local volume needs to be lower or higher than the overall zone volume level. |
 |
C1066 |
|
|
|
Designed to be installed with the C1065 subwoofer, this bridge supports the ceiling tile to minimise sag and reduce damage to soft tiles. Fits inside the "T-bars" for maximum support for the tile. Recommended for use with mineral fibre. |
 |
C0614B |
|
- Sound Pressure Level: 89±2 dBA*
- Resonance Frequency (Fo): 300±20% Hz
- Frequency Range: Fo - 10,000 Hz
- Rated Impedance: 8±15% Ω
- Rated Power: 1.0 W
- Max. Power: 2.0 W
- Magnet: Ø32 x Ø18 x 6 mm Ferrite
- Operating Temperature: -20ºC to 60ºC
- Storage Temperature: -30ºC to 70ºC
- Housing: Metal, 66mm x 66mm
- Depth: 20mm
- Diaphragm Material: Mylar
- Weight: 60g
- * Tested at 0.5m, 1W, 500, 600, 1kHz Average.
|
|
Sound Pressure Level: 89±2 dBA*
Resonance Frequency (Fo): 300±20% Hz
Frequency Range: Fo - 10,000 Hz
Rated Impedance: 8±15% Ω
Rated Power: 1.0 W
Max. Power: 2.0 W
Magnet: Ø32 x Ø18 x 6 mm Ferrite
Operating Temperature: -20ºC to 60ºC
Storage Temperature: -30ºC to 70ºC
Housing: Metal, 66mm |
 |
C5210 |
|
- Rated power: 100W @ 8Ω
- Power taps: 100W
- Max SPL: 98dB
- Freq response: 55Hz - 15Khz
- Weight: 5kg
- Dimensions (mm): 260W x 320D x 340H
|
|
A high quality commercial grade passive 8" subwoofer for use with either 100V line PA amplifiers or low impedance 4 - 8 Ohm amplifiers. This sub provides additional low end response to foreground music and hi-fi applications. |
 |
C1065 |
|
- Rated power: 240W @ 4Ω
- Power taps: 60, 120, 240W
- Max SPL: 112dB
- Freq response: 30Hz - 15Khz
- Weight: 7.5kg
- Dimensions (mm): 367 x 330Dmm
|
|
High power commercial grade 10" subwoofer for providing additional low end response to foreground music and hi-fi applications. |
 |
C2117B |
|
- Power taps: 1.25, 2.5, 5, 10, 15 watts
- SPL 1W @ 1m: 95dB @ 1kHz ±2dB
- Freq response: 80Hz- 12kHz
- Terminal type: 4 way screw terminal & 22µF bipolar cap
- Ceiling cutout: 185mm Ø
- Mounting depth: 75mm
- Transformer cover: No
- Cable restraint: No
|
|
Specifically engineered for use in PA and fire evacuation systems where a high level of SPL and speech intelligibility is essential.
|
 |
C2165 |
|
- Overall Dimensions: 590 mm x 155 mm
- Hole Diameter: 140 mm
|
|
Designed to be installed with the One-Shot ceiling speakers, these pans support the ceiling tile to minimise sag and reduce damage to soft tiles. Fits inside the "T-bars" for maximum support for the tile. Recommended for use with mineral fibre |
 |
C2161 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Low profile design is only 65mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2171. At only 65mm overall height, these models are ideal for low profile ceiling spaces. It features flame retardent housing material, sealed cable gland entries and a tuned PA driver to suit the new approval requirements. |
 |
C2160 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Low profile design is only 65mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2170. At only 65mm overall height, these models are ideal for low profile ceiling spaces. It features flame retardent housing material, sealed cable gland entries and a tuned PA driver to suit the new approval requirements. |
 |
C2261 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Stylish finish with rust free aluminium grille.
- Black RAL9004 mesh grille.
- Low profile design is only 65mm deep - penetrates ceiling by only 53mm (with 12mm thickness ceiling tile).
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Designed to meet AS ISO7240.24:2018. Our first One-Shot speaker with a aluminium grille, this model has been designed for installations requiring a premium finish whilst still meeting the required fire standards. |
 |
C0854 |
|
- Impedance: 8Ω
- Rated power: 30W RMS
- Max power: 50W
- SPL 1W @ 1m: 90dB
- Freq response: 60Hz - 20kHz
- Weight: 1.3kg
- Mounting hole size (mm): 190Ø
- Dimensions (mm): 230Ø x 90D
|
|
This dual input ''stereo summing'' speaker is engineered to provide stereo imaging from a single speaker unit. It is used where a confined space makes installing two seperate left and right channel speakers impractical. It features +3dB bass and treble boost switches for preferential sound tailoring. |
 |
C1008C |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. Can be connected via SpeakOn. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
 |
C1004C |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. Can be connected via Speakon. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
 |
C1000C |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. Can be connected via Speakon. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
 |
C0996C |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. Can be connected via Speakon. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
 |
C3623A |
|
|
|
Protect your speaker cabinets with these quality corners Simply screws over the cabinet. Requires no cutting. |
 |
CF0720 |
|
- Designed to meet AS ISO7240.24 standard for fire & evacuation warning systems
- Excellent speech intelligibility
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 2 way latching system reduces installation time.
- Fitted with 4 way wire protect terminal block for loop in, loop out wiring as required by Australian Standards.
- Fitted with supervisory capacitor for line monitoring.
- High impact fire retardant enclosure & grille.
- Australian designed & assembled.
- 5 year warranty.
|
|
The re & evacuation safety standard has changed to AS ISO 7240.24: 2018. This new standard will be implemented in new building projects. Redback is releasing this new range of horn and ceiling speakers to meet this standard to ensure re & evacuation installations in new buildings meet the required code. |
 |
CF0716 |
|
- Rated Noise Power: 5 Watts (100V line)
- Power Taps & Impedance (100V line): 0.33W (30kΩ), 0.66W (15kΩ), 1.25W (8kΩ), 2.5W (4kΩ), 5W (2kΩ)
- Sensitivity: 93dB (1W@1M), 81dB (1W@4M)
- Maximum Sound Pressure Level: 101dB (5W@1M), 89dB (5W@4M)
- Frequency Response: 100 Hz - 15kHz; 500 - 4kHz O 8dB
- Coverage Angle (-6dB): 500 Hz: > 180 o , 1000Hz: 81o , 2000Hz: 93o , 4000Hz: 58o
- Environmental Type: A (for indoor applications as per standard)
- Speaker Component: 200mm (8”) paper cone speaker
- Mounting Method: Surface Attachment
- Line Monitoring: Yes, 22μF bipolar capacitor
- Applicable Cable: 2.5mm2 (14AWG) max conductor area
- Connection: 4 way screw terminal
- Finish:
- Black ABS grille and housing (Starex VH-0800)
- Black Flame retardant ABS spring clips (Cycoloy C2950HF)
- IP Rating: IP 21C
- Dimensions: 310Ø x 85mm
- Weight: 1.36kg
|
|
The re & evacuation safety standard has changed to AS ISO 7240.24: 2018. This new standard will be implemented in new building projects. Redback is releasing this new range of horn and ceiling speakers to meet this standard to ensure re & evacuation installations in new buildings meet the required code. |
 |
CF0715 |
|
- Designed to meet AS ISO7240.24 standard for fire & evacuation warning systems
- Excellent speech intelligibility
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 2 way latching system reduces installation time.
- Fitted with 4 way wire protect terminal block for loop in, loop out wiring as required by Australian Standards.
- Fitted with supervisory capacitor for line monitoring.
- High impact fire retardant enclosure & grille.
- Australian designed & assembled.
- 5 year warranty.
|
|
The re & evacuation safety standard has changed to AS ISO 7240.24: 2018. This new standard will be implemented in new building projects. Redback is releasing this new range of horn and ceiling speakers to meet this standard to ensure re & evacuation installations in new buildings meet the required code. |
 |
CF0704 |
|
- Electrical
- Rated Noise Power: 5 Watts (100V line)
- Power Taps & Impedance (100V line): 0.33W (30kΩ), 0.66W (15kΩ), 1.25W (8kΩ), 2.5W (4kΩ), 5W (2kΩ)
- Sensitivity: 88dB (1W @ 1m), 76dB (1W @ 4m)
- Maximum Sound Pressure Level: 95dB (5W @ 1m), 83dB (5W @ 4m)
- Frequency Response: 100Hz – 15kHz
- Coverage Angle (-6dB): 1000Hz: 140°, 2000Hz: 105°, 4000Hz 80°
- Environmental Type: A (for indoor applications as per standard)
- Line Monitoring: Yes, 22µF bipolar capacitor
- Applicable Cable: 2.5mm2 (14AWG) max conductor area
- Connection: 4 way screw terminal
- Mechanical
- Speaker Component: 100mm (4”) paper cone speaker
- Material:
- Black flame retardant ABS grille and housing (Taitalac 8540T)
- Clear Flame retardant ABS spring clips (Makrolon 6557)
- Mounting Method: Surface Attachment
- IP Rating: IP 21C
- Dimensions: 210Ø x 67mm
- Weight: 0.81kg
- Environmental
- Operating temperature: -25°C to +55°C
- Relative humidity: < 95%
- Additional Installation Accessories
- C 0699 Conduit mounting plate
|
|
Designed to meet AS ISO7240.24:2018*. Fire version of our popular One-Shot C 0703 speaker. It features flame retardent housing material and a tuned PA driver to suit the new approval requirements. One-Shot design simply snap-fits in seconds to the surface mounting ring, reducing installation time considerably. |
 |
CF0703 |
|
- Electrical
- Rated Noise Power: 5 Watts (100V line)
- Power Taps & Impedance (100V line): 0.33W (30kΩ), 0.66W (15kΩ), 1.25W (8kΩ), 2.5W (4kΩ), 5W (2kΩ)
- Sensitivity: 88dB (1W @ 1m), 76dB (1W @ 4m)
- Maximum Sound Pressure Level: 95dB (5W @ 1m), 83dB (5W @ 4m)
- Frequency Response: 100Hz – 15kHz
- Coverage Angle (-6dB): 1000Hz: 140°, 2000Hz: 105°, 4000Hz 80°
- Environmental Type: A (for indoor applications as per standard)
- Line Monitoring: Yes, 22µF bipolar capacitor
- Applicable Cable: 2.5mm2 (14AWG) max conductor area
- Connection: 4 way screw terminal
- Mechanical
- Speaker Component: 100mm (4”) paper cone speaker
- Material:
- White flame retardant ABS grille and housing (Taitalac 8540T)
- Clear Flame retardant ABS spring clips (Makrolon 6557)
- Mounting Method: Surface Attachment
- IP Rating: IP 21C
- Dimensions: 210Ø x 67mm
- Weight: 0.81kg
- Environmental
- Operating temperature: -25°C to +55°C
- Relative humidity: < 95%
- Additional Installation Accessories
- C 0699 Conduit mounting plate
|
|
Designed to meet AS ISO7240.24:2018*. Fire version of our popular One-Shot C 0703 speaker. It features flame retardent housing material and a tuned PA driver to suit the new approval requirements. One-Shot design simply snap-fits in seconds to the surface mounting ring, reducing installation time considerably. |
 |
C2260 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Stylish finish with rust free aluminium grille.
- White RAL9003 mesh grille.
- Low profile design is only 65mm deep - penetrates ceiling by only 53mm (with 12mm thickness ceiling tile).
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Designed to meet AS ISO7240.24:2018. Our first One-Shot speaker with a aluminium grille, this model has been designed for installations requiring a premium finish whilst still meeting the required fire standards. It can also be used for standard 100V PA/BGM installations. |
 |
C2172 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Designed to meet AS ISO 7240.24:2018. Considerable development and has been put into this fire announcement system approved version of our popular One-Shot 'Rat-Trap' speaker. Flame retardent design with tuned PA driver to suit the latest approval requirements. |
 |
C2070 |
|
- Power rating: 30W RMS
- Power taps (100V): 15 & 30W
- SPL 1W @ 1m: 100dB
- SPL Max @ 1m: 115dB
- Frequency response: 130Hz - 18kHz
- Dimensions: ≈360W x 165H x 275D mm
- Colour: Grey
- Weight: ≈3.1kg
- Connection details:
- Black Common
- White 30W tap (330 ohms)
- Green 15W tap (670 ohms)
|
|
A high performance weatherproof music horn for use in installations requiring a high output speaker for BGM programming and paging playback. |
 |
C2157 |
|
- Power taps: 0.66, 1.25, 2.5, 5, 10W
- Frequency Response: 100Hz- 15kHz
- SPL 1W @ 1M: 94dB (+/- 2dB)
- Size: 100mm
- Hole Cutout (Ø): 140mm
- Connection: 4 way terminal block
- Colour: White
|
|
Redback "One-Shot" speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. |
 |
C2171 |
|
- Electrical
- Power taps: 0.33, 0.66, 1.25, 2.5, 5W
- Impedance: 30kΩ, 15kΩ, 8kΩ, 4kΩ, 2kΩ
- SPL 1W @ 1m: 90dB
- SPL 1W @ 4m: 78dB
- SPL 5W @ 1m: 97dB
- SPL 5W @ 4m: 85dB
- Frequency response: 100Hz-15kHz
- Coverage Angles: 1000Hz 182°, 2000Hz 163°, 4000Hz 77°
- Connection: 4 way terminal block + 22uF bipolar capacitor
- Approval: AS ISO7240.24
- Environmental Type: A (for indoor applications)
- SPL by tappings @ 1m
- 0.33W: 85.2dB
- 0.66W: 88.2dB
- 1.25W: 91.2dB
- 2.5W: 94dB
- 5W: 97dB
- Mechanical
- Material:
- Black flame retardant ABS grille (Taitalac 8540T)
- Black flame retardant ABS spring clips (Cycoloy C2950HF)
- Red flame retardant ABS transformer dome cover (Starex VH-0800)
- Driver construction: Paper cone
- Ceiling cutout: 140mmØ
- Grille diameter: 159mmØ
- Mounting depth: 117mm (including ceiling tile thickness)
- Overall weight: 700g
- Environmental
- Operating temperature: -25°C to +55°C
- Relative humidity: < 95%
- IP Rating: IP21
|
|
Designed to meet AS ISO 7240.24:2018. Considerable development and has been put into this fire announcement system approved version of our popular One-Shot 'Rat-Trap' speaker. Flame retardent design with tuned PA driver to suit the latest approval requirements. |
 |
C2170 |
|
- Electrical
- Power taps: 0.33, 0.66, 1.25, 2.5, 5W
- Impedance: 30kΩ, 15kΩ, 8kΩ, 4kΩ, 2kΩ
- SPL 1W @ 1m: 90dB
- SPL 1W @ 4m: 78dB
- SPL 5W @ 1m: 97dB
- SPL 5W @ 4m: 85dB
- Frequency response: 100Hz-15kHz
- Coverage Angles: 1000Hz 182°, 2000Hz 163°, 4000Hz 77°
- Connection: 4 way terminal block + 22uF bipolar capacitor
- Approval: AS ISO7240.24
- Environmental Type: A (for indoor applications)
- SPL by tappings @ 1m
- 0.33W: 85.2dB
- 0.66W: 88.2dB
- 1.25W: 91.2dB
- 2.5W: 94dB
- 5W: 97dB
- Mechanical
- Material:
- White flame retardant ABS grille (Taitalac 8540T)
- Clear Flame retardant ABS spring clips (Makrolon 6557)
- Red flame retardant ABS transformer dome cover (Starex VH-0800)
- Driver construction: Paper cone
- Ceiling cutout: 140mmØ
- Grille diameter: 159mmØ
- Mounting depth: 117mm (including ceiling tile thickness)
- Overall weight: 700g
- Environmental
- Operating temperature: -25°C to +55°C
- Relative humidity: < 95%
- IP Rating: IP21
|
|
Designed to meet AS ISO 7240.24:2018. Considerable development and has been put into this fire announcement system approved version of our popular One-Shot 'Rat-Trap' speaker. Flame retardent design with tuned PA driver to suit the latest approval requirements. |
 |
C1058
|
|
- Power Taps: 5, 10, 15, 20, 30W, 8Ω
- SPL 1W @ 1m: 90dB
- Freq. Response: 70Hz - 20kHz
- Sound dispersion: 135º conical
- Weight: 2.1kg
- Colour: White
- Material: ABS Plastic
- Cable Length: 5M
- Dimensions: Ø185mm x 230mm
- IP Rating: IP45
|
|
Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. |
 |
C0994 |
|
- 2 x Balanced XLR mic input
- 1 x Balanced 6.35mm jack mic input
- TRS 6.35mm stereo jack line input
- USB input for digital audio playback
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion
- Inbuilt top hat mount and carry handle
- Wide frequency response
- Titanium diaphragm compression driver
- Built-in MP3, WAV, WMA file player with USB input
|
|
A high powered active speakers series identical in performance and construction to the unpowered units, each include a self-contained power amplifier. Simply connect 240VAC power and a thumbdrive. |
 |
C0995 |
|
- 2 x Balanced XLR mic input
- 1 x Balanced 6.35mm jack mic input
- TRS 6.35mm stereo jack line input
- USB input for digital audio playback
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion
- Inbuilt top hat mount and carry handle
- Wide frequency response
- Titanium diaphragm compression driver
- Built-in MP3, WAV, WMA file player with USB input
|
|
A high powered active speakers series identical in performance and construction to the unpowered units, each include a self-contained power amplifier. Simply connect 240VAC power and a thumbdrive. |
 |
C2060 |
|
- Power taps: 1.25, 2.5, 5, 7.5, 10W
- SPL 1W @ 1m: 104dB @ 1kHz (+/- 2dB)
- SPL Max Tap @ 1m: 114dB @ 1kHz (+/- 2dB)
- Frequency response: 340Hz-10kHz
- Connection: 4 core fly lead
- EWIS line monitoring: 22uF bipolar capacitor fitted
- Dispersion angle @ 1kHz: 160° vertical, 130° horizontal
- Driver construction: Aluminium voice coil former
- Mounting depth: 255mm
- Overall weight: 1.2kg
- Operating temperature: -20°C to +55°C
- Relative humidity: < 95%
|
|
Based on the popular C 2050 Redback horn speaker this all new release has been developed to offer similar performance at a substantially reduced price. A compact PA horn speaker with installation time saving features patented by Redback. Ideal for general paging and public address system needs, this horn offers excellent performance in a compact pa |
 |
C2115 |
|
- Driver model: C 2117A
- Power taps: 1.25, 2, 5, 10, 15W
- SPL 1W @ 1m: 95dB
- Freq. response: 80Hz - 12kHz
- Terminal type: 4 way screw terminal block and 22uF bipolar capacitor.
- Grill Type: Aluminium
- Mounting hole: 238mmØ
- Mounting depth: 88mm
|
|
The C 2115 is a 200mm (8") high power paper cone speaker fitted with a 15W 100V line transformer. These stylish, high performance, architecturally unobtrusive speaker/grill combinations can be painted to match decor. Super easy to install with a ''Flip-Lock'' mounting system. |
 |
C2051 |
|
- Power taps: 1.25, 2.5, 5, 7.5, 10W
- SPL 1W @ 1m: 104dB @ 1kHz (+/- 2dB)
- SPL Max Tap @ 1m: 114dB @ 1kHz (+/- 2dB)
- Frequency response: 340Hz-10kHz
- Connection: 4 core fly lead
- EWIS line monitoring: 22uF bipolar capacitor fitted
- Dispersion angle @ 1kHz: 160° vertical, 130° horizontal
- Driver construction: Aluminium voice coil former
- Mounting depth: 255mm
- Overall weight: 1.2kg
- Operating temperature: -20°C to +55°C
- Relative humidity: < 95%
|
|
Exclusive design incorporates a dog leg mounting bracket which eliminates the need to separate the horn from the bracket during installation. A real time & money saver! Traditional horn speaker brackets have to be removed, screwed to the wall surface, and then bolted back onto the horn speaker. |
 |
C2050 |
|
- Power taps: 1.25, 2.5, 5, 7.5, 10W
- SPL 1W @ 1m: 104dB @ 1kHz (+/- 2dB)
- SPL Max Tap @ 1m: 114dB @ 1kHz (+/- 2dB)
- Frequency response: 340Hz-10kHz
- Connection: 4 core fly lead
- EWIS line monitoring: 22uF bipolar capacitor fitted
- Dispersion angle @ 1kHz: 160° vertical, 130° horizontal
- Driver construction: Aluminium voice coil former
- Mounting depth: 255mm
- Overall weight: 1.2kg
- Operating temperature: -20°C to +55°C
- Relative humidity: < 95%
|
|
Exclusive design incorporates a dog leg mounting bracket which eliminates the need to separate the horn from the bracket during installation. A real time & money saver! Traditional horn speaker brackets have to be removed, screwed to the wall surface, and then bolted back onto the horn speaker. |
 |
C0721 |
|
- Power rating: 15 watts
- Power taps: 1.25, 2.5, 5, 10, 15 watts
- SPL 1W @ 1m: 95dB @ 1kHz ±2dB
- Freq response: 80Hz- 12kHz
- Connection: 4 way wire protect terminal & 22uF bipolar cap
- Dimensions: 310Ø x 85Hmm.
|
|
Super Fast Installation. Save Time & Money!
Saving valuable installation time the innovative One-Shot range is moulded from industrial grade, high impact polystyrene and designed to mount directly to the underside of concrete slabs or inacce |
 |
C0720 |
|
- Power rating: 15 watts
- Power taps: 1.25, 2.5, 5, 10, 15 watts
- SPL 1W @ 1m: 95dB @ 1kHz ±2dB
- Freq response: 80Hz- 12kHz
- Connection: 4 way wire protect terminal & 22uF bipolar cap
- Dimensions: 310Ø x 85Hmm.
|
|
Super Fast Installation. Save Time & Money!
Saving valuable installation time the innovative One-Shot range is moulded from industrial grade, high impact polystyrene and designed to mount directly to the underside of concrete slabs or inacce |
 |
C2117A |
|
- Power rating: 15 watts
- Power taps: 1.25, 2.5, 5, 10, 15 watts
- SPL 1W @ 1m: 95dB @ 1kHz ±2dB
- Freq response: 80Hz- 12kHz
- Ceiling cutout: 185mm Ø
|
|
Specially engineered to deliver 100dB 1W/1m @ 1kHz for use in PA and fire evacuation systems where a high level of SPL and speech intelligibility is essential. Includes 15W 100V transformer, 4 way wire protect terminal block & 22μF bipolar capacitor. |
 |
C1004B |
|
- Rating: 300W (RMS)
- Impedance: 4Ω
- SPL (1W @1m): 97dB
- Frequency Resp: 65Hz - 20kHz
- Dimensions (mm): 390 x 320 x 580
- Weight: 13.5kg
|
|
A high power compact sound solution for bands, DJs and venues. |
 |
C1057 |
|
- Power Taps: 5, 10, 15, 20, 30W, 8Ω
- SPL 1W @ 1m: 90dB
- Freq. Response: 70Hz - 20kHz
- Sound dispersion: 135º conical
- Weight: 2.1kg
- Colour: White
- Material: ABS Plastic
- Cable Length: 5M
- Dimensions: Ø185mm x 230mm
- IP Rating: IP45
|
|
Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. |
 |
C1006B |
|
- Rugged moulded ABS construction
- Cast aluminium frame bass driver with large voice coil diameter
- Inbuilt top hat mount and carry handle
- Wide frequency response
- Titanium diaphragm compression driver
- 4 rigging points
|
|
A high power design which is suited to bands, DJs and venues where excellent quality, temporary sound is required. In-built carry handles make set up a breeze. Balanced input and output. Adjustable bass, treble & volume. |
 |
C0524 |
|
- Height adjustment: 1000-2000mm
- Load capacity: 40kg
- Shaft diameter: 35mm
- Colour: Black
- Material: Steel
|
|
Extra heavy duty ALL steel construction and collapsible for easy transportation. Anti-sway bars on legs provides stability. Suit 35mmØ top hats for most popular commercial equipment. Adjusts from approx 1-2 metres with a payload of 40kg. |
 |
C1060 |
|
- 100V line or 8 Ohm operation
- Wide frequency response
- High speech intelligibility
- Fitted with 2m cable
- Stylish modern finish
- 6.5” coaxial speaker
- Ideal for BGM and paging requirements
|
|
A stylish pendant speaker for installations requiring a high power SPL output. Ideally suited to high raked, suspended, concrete or exposed ceilings. Installation requires a single fixing with connection concealed within the ceiling rose provided. Fitted with 6.5" coaxial 2 way driver and high efficiency transformer. |
 |
C0937 |
|
- Horizontal or vertical mounting
- Ball joint angle adjustment
- Dual 4” woofer drivers with 3/4” titanium dome tweeter
- Ideal for BGM & general sound reinforcement
- Stylish glossy finish & enclosure design for upmarket bars, boutiques and venues
|
|
These stylish wall speakers deliver high quality sound for music and sound reinforcement. Ideal for entertaining areas at home or boutiques, cafes, pubs & clubs in professional installations. Connection is via spring terminals on rear. Aluminium grille & stainless steel hardware offer rust free performance in even the most demanding environments. |
 |
C0936 |
|
- Horizontal or vertical mounting
- Ball joint angle adjustment
- Dual 4” woofer drivers with 3/4” titanium dome tweeter
- Ideal for BGM & general sound reinforcement
- Stylish glossy finish & enclosure design for upmarket bars, boutiques and venues
|
|
These stylish wall speakers deliver high quality sound for music and sound reinforcement. Ideal for entertaining areas at home or boutiques, cafes, pubs & clubs in professional installations. Connection is via spring terminals on rear. Aluminium grille & stainless steel hardware offer rust free performance in even the most demanding environments. |
