|
Description |
Downloads |
Specs |
Ordering |
|
 |
Q0207 |
|
- General information
- • markers: for amplitude/voltage and frequency/time
- • input coupling: DC, AC and GND
- • 8 bit resolution
- • storage of display and data
- • supply from USB port (500mA)*
- • dimensions: 100x100x35mm / 3,9x3,9x1.4"
- Spectrum analyser:
- • frequency range: 0 .. 120Hz to 12MHz
- • linear or logarithmic timescale
- • operating principle: FFT (Fast Fourier Transform) • FFT resolution: 2048 lines
- • FFT input channel: CH1 or CH2
- • zoom function
- Transient recorder
- • timescale: 20ms/Div to 2000s/Div
- • max record time: 9.4hour/screen
- • automatic storage of data
- • automatic recording for more than 1 year • max. number of samples: 100/s
- • min. number of samples: 1 sample/20s
- Function generator
- • frequency range: sine from 0.5Hz to 1MHz
- • square and triangle from 0.5Hz to 500kHz
- • extended waveform library
- • amplitude range: 200mVpp to 8Vpp @ 1KHz//
- output impedance: 50ohm
- Oscilloscope
- • bandwidth: two channels DC to 12 MHz ±3dB • input impedance: 1 Mohm / 30pF
- • maximum input voltage: 30V (AC + DC)
- • time base: 0.1μs to 500ms per division
- • input range: 10mV to 3V/division
- • readouts: True RMS, dBV, dBm, p to p, Duty
- cycle, Frequency...
- • record length: 4K samples / channel
- • sampling frequency: 250Hz to 25MHz
- • sample history and digital grab function
- Bode plotter
- • Automated sync between oscilloscope and generator
- • Frequency range: 1kHz , 10kHz, 100kHz, 1MHz
- • Frequency start: 1Hz, 10Hz, 100Hz, 1kHz, 10kHz
|
|
Pocket size PC oscilloscope and function generator. This small box contains a world of measuring tools! |
 |
Q0587 |
|
|
|
An adjustable battery capacity readout allowing you to display approximate battery levels for any battery between 1V and 100V. |
 |
Q0592 |
|
|
|
This meter is used to monitor all kinds of battery voltage, discharge current, discharge power, discharge impedance, internal resistance, capacity, SOC, energy, running time and display the measurement data through the LCD screen. |
 |
Q0594 |
|
- Operating Voltage: 8.0V (min), 50.0V (regular), 120V (max)
- Working Power Consumption (Backlighting): 6.0mA (regular), 8.0mA (max)
- Standby Power Consumption (Backlit Off): 0.5mA (regular), 0.8mA (max)
- Sleep Power Consumption: 50.0µA (regular), 60.0µA (max)
- Voltage Acquisition Accuracy: ±1.0%
- Current Acquisition Accuracy: ±1.0%
- Capacity Acquisition Accuracy: ±1.0%
- Backlight Turn-On Current: 50mA
- The range of capacity values can be set: 0.1Ah (min), 100Ah (regular), 9999.0Ah (max)
- Sampler Current (50A): 0A (min), 50.0A (regular), 75A (max)
- Temperature Range: -10°C (min), 20°C (regular), 50°C (max)
- Weight: 150g
- Monitor Size: 66 x 40 x 14 mm
- Panel Cutout: 53.5 x 37.5. (hole centres 58mm).
|
|
A compact backlit battery "fuel gauge" with high precision current measurement. |
 |
Q0596 NEW
|
|
- Easy to read bright display.
- Display backlighting
- Battery capacity meter.
- Ideal for measuring run time for auxiliary batteries, portable and mobile equipment.
- Includes 350A shunt with sampling circuit.
- Configurable battery capacity.
- Adjustable "Full" and "Zero" voltages.
|
|
A compact backlit battery "fuel gauge" with high precision current measurement. |
 |
Q1053B |
|
- Jumbo display
- Continuity buzzer
- Square wave output
- Transistor tester
- Current measurement
- Voltage measurement
- Diode tester
- Low battery indicator
- Battery included
- Cat II 500V
|
|
This compact, affordable digital multimeter features 19 ranges, square wave output, continuity buzzer, in-built hFE transistor and diode test function. |
 |
Q1058 NEW
|
|
- Large easy to read 20000 count screen
- Folding design stays stable on any surface
- Use it on the bench top or in the field
- Autoranging
- Handy automotive testing functions
- Non-contact AC voltage detection >90V AC
- Data hold, min/max relative modes
- In-built lithium battery pack - no batteries required!
- USB C rechargeable
- Temperature measurement (sensor included)
|
|
This folding autoranging digital multimeter provides in depth functionality for technicians troubleshooting devices and circuits. |
 |
Q1090 |
|
- 9999 count reverse backlit readout
- True RMS
- Non contact voltage detection
- Auto ranging with push button operation
- Data hold and relative modes
- Analog bar graph display
- Cat III 600V, Cat II 1000V
- Battery & carry pouch included
|
|
Professional digital multimeter with in-built AC mains detection. Featuring a striking easy to read reverse backlit screen and a massive 9999 count readout. Auto ranging with easy push button operation. Great price and build quality. |
 |
Q1255A |
|
- Use on wood, wall board, sheet rock, cardboard, plaster, concrete, mortar and more
- Big backlit LCD display
- Replaceable electrode pins
- 2-in1 Digital LCD readout and analog bargraph
- Simultaneous measurement, display of moisture and temperature readings
- Materials selection measurements
- MAX/MIN/DATA hold
- Auto power off
|
|
Designed to measure moisture in wood and building materials this handheld meter can test levels in sawn timber, plaster, concrete, mortar and many other hard materials. |
 |
Q1278B NEW
|
|
|
|
A handy fast reading digital thermometer suitable for a wide array of uses such as monitoring liquids in laboratory, kitchen or BBQ use - great for roasting meats home brew setups and more! |
 |
R2274S |
|
|
|
Mixed 10 pack of 24mm Dual Gang D Shaft Pots. Contents may vary.
|
 |
S4579 |
|
- General
- Dimensions: 410L x 176W x 227H mm (including tabs)
- Weight: 36kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 125Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 5mΩ
- Max. Discharge Current: 1300A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M8/F17
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 40A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 126Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4708A |
|
|
|
Low discharge Ni-MH batteries ready for use straight out of the pack and rechargeable in a AA or AAA charger. Recharge up to 1000 times. Hold up to 85% capacity even when unused for 12 months. 2300mAH Capacity
Suitable for our A 0281 charger. |
 |
S4734
|
|
- Nominal Capacity: 2500mAh (0.2C, 2.5V discharge)
- Minimum Capacity: 2550mAh (0.2C, 2.75V discharge)
- Charging Voltage: 4.2 ±0.05 V
- Nominal Voltage: 3.6V
- Charging Method: CC-CV (constant voltage with limited current)
- Charging Current: Standard charge: 1250mA, Rapid charge : 4000mA
- Charging Time: Standard charge : 3hours, Rapid charge : 2.5hours
- Max. Charge Current: 2600mA (ambient temperature 25°C)
- Max. Discharge Current: 20A (ambient temperature 25°C)
- Discharge Cut-off Voltage: 2.5V
- Cell Weight: 45.0g max
- Cell Dimension: Height: 64.85±0.15mm, Diameter: 18.33±0.07mm
- Operating Temperature: Charge: 0 to 50°C, Discharge: -20 to 75°C
- Storage Temperature 1 year: -30~25°C, 3 months: -30~45°C, 1 month: -30~60°C
|
|
These high performance 18650 lithium ion 3.7V batteries offer high performance and long life from a compact package. They are 18.6mm in diameter and 65mm long. They offer a higher maximum current output than the standard 18650 batteries. |
 |
S5184A |
|
- SPST
- 760 x 530mm
- 6mm thick.
- 50cm fly lead.
- Normally OPEN contacts
- Activates with approximately: 2.5kg
- Maximum load bearing weight: 158kg
|
|
Ultra thin pressure mat for under carpet or rugs.
SPST
760 x 530mm
6mm thick.
50cm flylead.
Normally OPEN contacts |
 |
S5288B |
|
- Plug-and-go operation - no programming required
- Alarm Panel Compatibility Compatible with all Ness PSTN alarm diallers in Contact ID DTMF and Voice formats
- Antenna with magnetic base supplied - long cable allows the unit to be installed in a secure housing
- Compatible with all Ness PSTN control panels and most third party panels
- LCD status display
- 12V Plug pack powered (included)
- On board battery backup
|
|
With this NESS 3G/4G Dialler you no longer need to worry about the absence of PSTN phone lines with the NBN roll out. The Ness 4G Dialler provides a 3G or 4G pathway for alarm diallers to communicate in the absence of a land line. |
 |
S5377 |
|
- Weather resistant design (IP54)
- Vandal resistant
- Compatible with 125KHz 64-bit EM cards & key fobs
- Built-in logics for stand alone, split-decoded and multi-station operations
- Controls “Going In” with user codes/cards
- “Going Out” with feature programmable egress button
- Door Bell for guests/service persons /tradesmen
- Stainless steel faceplate
|
|
This weatherproof vandal resistant door keypad controller is designed for controlling a door strike in home or business security installations. It combines a digital keypad and proximity EM card reader in one unit. |
 |
S6018 |
|
|
|
This high current fuse block uses MEGA type fuses. Suits M8 ring terminals. 250A max. Gold plated connections. Size: 129Wx44Hx37Wmm.
Fuse not included. |
 |
S9292B |
|
|
|
Downscales a VGA signal to a composite video signal for connecting the VGA output of a DVR to a standard monitor input. Supports resolutions up to 1920 x 1024 @ 60Hz. No software required. NTSC or PAL switchable. USB powered. |
 |
S9367D |
|
- H.264+/265+ compression
- 4K HDMI monitor output
- Recording 10 channels up to 8MP @ 25fps per ch
- Supports iOS and Android remote viewing
- 8 x 15.4W PoE network interfaces
- One internal SATA interface, max 8TB
- USB backup
- Dedicated network interface
- Audio input & output
- ONVIF 2.8
- Support Plug and Play
- Support network cable extended mode - Max. 200M
|
|
This multi channel network video recorder offers 8MP resolution recording at 25fps for up to 10 cameras (or 14ch of 5MP @ 25fps). |
 |
S9369 |
|
- H.264+/265+ compression
- 4K HDMI monitor output
- Recording 25 channels up to 5MP @ 25fps per ch
- Supports iOS and Android remote viewing
- 16 x 15.4W PoE network interfaces
- Four internal SATA interface, max 32TB
- Remote control & mouse
- USB backup
- Dedicated network interface
- Audio input & output
- ONVIF 2.4 support
|
|
This multi channel network video recorder offers 5MP resolution recording at 25fps for up to 25 cameras (or 12ch of 4K @ 25fps). For ease of installation, 16 dedicated PoE ports are in-built. It utilises H.264/H.265+ compression to maximise your hard disk space and has wide camera compatibility with ONVIF 2.4 support. |
 |
S9379 |
|
- HD Video Recording
- HD real-time recording brings users clear images while video recording and playback
- 1920*1080 Full HD video output service, giving the best image quality on LCD / LED monitors.
- Multi-platform Remote Access
- Fully compatible with iPhone & iPad, and Internet Explorer on Windows operating system
- AVTECH free CMS program on both Windows and MAC OS
- Powerful Storage Capacity
- Support up to 3 hard disks for long-term recording and saving large amount of recording data.
- Smart Recording
- High video resolution switch for events to optimize the recording efficiency of the hard disk.
- External Disk Array Support for More Video Storage
- eSATA interface built-in to connect a disk array (up to 4-bay disk array with RAID 0 and 1) for more video storage.
- Full HD HDMI Video Output
- 1920*1080 Full HD video output service, giving the best image quality on LCD / LED monitors.
- RS485 Communication
- Capable of external device connection to extend the functionality and flexibility of your NVR.
|
|
These network video recorders are designed to capture streams from up to 25 IP cameras with event notification via a remote monitoring app for Android or iOS devices. |
 |
S9380A |
|
- Installations of CCTV systems can vary greatly in configuration and technical complexity. We recommend that unless you have skills in computer networking that you engage a CCTV installer or professional to set up your installation. The process can involve opening router ports, setting up IP routes etc which can be daunting for a beginner. Every installation is different, as a result, it can be difficult to diagnose set up issues over the phone or via email.
|
|
This compact DVR can achieve up to 25x 12MP channels at 25fps or 36x 5MP channels at 25fps! Suitable for use with an external dedicated PoE switch (see below) it offers high resolution surveillance solution for installations requiring a large number of cameras. |
 |
S9445 |
|
- 4K Ultra Full HD video
- 30MP still shot capability
- Internal battery pack with solar recharging
- Adjustable triggering, intervals and duration.
- Loop recording
- Large aperture lens
- WiFi connectivity
- 30MP clear night and day imaging
- IP66 rated
- 18 month indoor standby time
- Bluetooth 5.0 with low power consumption
- Full automatic IR filter
- Built-in microphone & speaker
- Moon phase/temperature/time/date stamp functions
|
|
This 4k solar powered Wi-Fi trail camera is a wildlife and surveillance camera with a 3 zone infrared sensor. |
 |
S9455A |
|
|
|
This Wi-Fi video doorbell with ringer allows you to answer the door when you’re not even home! This wifi video doorbell allows you to monitor who and what arrives at your door through the use of your phone. |
THIS PRODUCT CONTAINS A BUTTON BATTERY.
