|
Description |
Downloads |
Specs |
Ordering |
|
|
A2620 |
|
- 4 x unbalanced 6.35mm inputs
- 1 x unbalanced 6.35mm outputs
- 24dB total gain
- Frequency response: 10-100KHz
- THD: less than 0.05%
- Signal to noise ratio: >80dB
- Dimensions: 152 x 84 x 52mm
- Input impedance: 30K Ohm
- Output impedance: 600/5K Ohm unbalanced, 1.2K/10K Ohm unbalanced
- Max unbalanced output level: +16dB
- 9V battery power (20 hour battery life)
- 9-12V DC plugpack input
|
|
This compact mono mixer allows 4 channels of audio to be mixed via 6.35mm unbalanced connections. It features 4 x 6.35mm unbalanced inputs, 1 x 6.35mm balanced master output, master volume control.
Can be operated by 9V battery or 12V plugpack. Sold se |
|
P8000 |
|
- Smooth control of dimmable LED loads, no configuration required
- Short circuit, thermal overload and over-current protection
- Two wire phase-control design
- Complies with Australian EMC standards
- Soft start for increased lamp and driver life
- Suits standard Clipsal mech recesses
|
|
These dimmer mechanisms suit standard Clipsal mechanism wallplate recesses and offer LED compatible light dimming with soft start. |
|
A0928 |
|
- Range over HDMI: 1-60m
- IR Frequency: 30-60kHz (dual band)
- Receiving distance: 12m
- Max operation current: 15mA
- Power: None required.
|
|
Allows you to repeat infra-red control signals over HDMI from your TV to HDMI equipped device, amplifier or receiver. The HDMI inline dongles allow easy connection to IR target & emitter (included). |
|
D2213 |
|
- Compact, Portable and Light Weight
- Flexible legs that can be curved randomly
- Suitable for Indoor and Outdoor Use
- Compatible with all iPhones, Samsungs and most Other Smartphones up to 3.5 inches wide.
- Compatible with all cameras with 1/4 screw interface and a max weight of 0.8kg
- Includes a GoPro adapter
- USB rechargeable Bluetooth remote control
- Adjustable ball tripod head
|
|
This uFO flexible tripod is a great idea for any photography enthusiast. It has been designed to be compact and portable. |
|
X0604C NEW
|
|
- FM transmitter
- Easily portable
- Dual USB car charger
- USB Port for playing music
- Car battery voltage monitor
|
|
Works as a hands free system, retransmitting audio over your FM radio for calls plus plays audio from your phone. Fitted with USB C 20W PD charger. |
|
D2362A NEW
|
|
- USB 3.0 5Gbps transfer speeds on all ports.
- Illuminated power switches, see which devices are turned on at a glance.
- USB type A connection.
- Compact and lightweight design.
- Provides plenty of ports for all your USB devices.
- Plug and play, no drivers required for most operating systems.
- External power input port provided for high current devices (USB-C)
|
|
A handy 7 port USB 3.0 hub for those with lots of peripherals! Each connection has a dedicated on/off switch. USB type C power input with type A connection to your computer. |
|
S1160A |
|
- Switch type: SPST
- Switching current: 1A DC
- Contact rating 1.5A @ 200VDC (Max)
- Contact resistance: 90mΩ
- Insulation resistance: >10^10 Ω
- Magnetic sensitivity: 20 - 50 AT
- Operate time: 0.35ms
- Flying lead length: 300mm
- Temperature Rating: -55 to 70 degrees C
|
|
New model with increased current handling. Fully immersible. Ideal for water tank systems such as rain or waste water management, activating boat bilge pumps etc. Can be used to control pumps or electric valves when liquid levels change. Includes a waterp |
|
S9789 |
|
|
|
Allows the mounting of a C/CS lens equipped camera onto a telescope. |
|
J0070 |
|
- Step angle: 1.8° 5%
- Voltage: 12V
- Phases: 2
- Current: 0.33A
- Insulation resistance: 100Mohm(500V DC)
- Inductance: 46 20± Mh
- Insulation class: B
- Resistance
- 34Ω± 10%
- Weight: 0.20Kg
- Holding torque: 0.23N/M
|
|
12V 200-step 1.8&deg 48BYG stepper motor with interface
lead. 2 phase type. 0.23Nm holding torque. 5mm&Oslash
shaft. NEMA17 M3 mounting hole pattern (31mm).
Size: 42x42x34 (25mm shaft). 1m lead. |
|
P5925 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Type VGA Plates are fitted with a HD9 female VGA connector. Supplied with two facia covers to suit your decor. |
|
K2546 |
|
- Customisable animal characters and scenes
- Soft light RGB LED with nice transitions
- RoHs-free, soft edge PCB with immersion-gold, environment-friendly
- Battery life up to 48 hours
- Assemble Time: 2 hours
- Ages 6 and up
|
|
This DIY soldering kit contains everything you need to create simple circuits with minimum level electronics and soldering. Kids will be introduced to the basics of circuit, soldering and take the opportunity to play with LEDs, batteries. |
|
P5952 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with HD9 female VGA, 3.5mm audio, three RCA connections & USB Type A. Supplied with two facia covers to suit your decor. |
|
P5954 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with HD9 female VGA, 3.5mm audio, three RCA connections & USB Type A. Supplied with two facia covers to suit your decor. |
|
P5961 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with HD9 female VGA and three RCA connections. Supplied with two facia covers to suit your decor. |
|
M8521A |
|
- Suitable for all 6V and 12V lead acid and gel batteries
- Suits battery recharging or maintenance (may be permanently connected).
- Protection against short circuit
- Ideal for battery storage or seldom used vehicles
- Light weight ‘plug in’ design
- Ring terminal or crocodile clip connection
|
|
This 6V/12V battery charger maintainer offers 600mA charging suitable for lead, gel cell and lead-acid batteries, including maintenance-free batteries. |
|
P6632A |
|
|
|
Micro HDMI to HDMI Lead, 3m. 4K @ 30Hz Ultra HD Ready. |
|
P5930 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with with a HD9 female VGA connector and 3.5mm audio. Supplied with two facia covers to suit your decor. |
|
P5934 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with with a HD9 female VGA connector and 3.5mm audio. Supplied with two facia covers to suit your decor. |
|
P5940 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with VGA, 3.5mm audio & USB connector. Rear connections are via screw terminals. Supplied with two facia covers to suit your decor. |
|
P5942 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with VGA, 3.5mm audio & USB connector. Rear connections are via back to back plugs. Supplied with two facia covers to suit your decor. |
|
P5944 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with VGA, 3.5mm audio & USB connector. Rear connections are via back to back plugs. Supplied with two facia covers to suit your decor. |
|
P5945 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with with a HD9 female VGA connector and 3.5mm audio. Supplied with two facia covers to suit your decor. |
|
P5946 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with VGA, 3.5mm audio & USB Type A. Supplied with two facia covers to suit your decor. |
|
P6849A |
|
|
|
Plug Connection Type plates are designed for use with premade cables, reducing on-site installation time. No cable termination required! Wallplate fitted with HD9 female VGA connector, USB type A & 3.5mm audio on the front and rear of wallplate. Also fit |
|
L1044 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Dual 12V DC Merit sockets with protective dust cap. Ideal for use in 4WDs,
Caravans and RV. 6.3mm spade connection. |