|
Description |
Downloads |
Specs |
Ordering |
|
 |
ZR6302G |
|
- On board on/off power button
- Integrated fan control forthermal management
- Dual-display support
- Two micro-HDMI ports
- Supports display resolutions up to 4K @ 60hz (1 x 2K up to 1440P@60, 1 x 4K 2.0 up to 4k@60)
- Multiple connectivity capabilities so less add on hardware required, including Bluetooth 5.0 with BLE, Gigabit Ethernet & Wireless LAN
- A 40P GPIO expansion header provides extensive compatibility with a wide range of accessories
- Get more multiple memory options, including 4GB RAM and a speed eMMC socket
- Compatible with most R-Pi 4 accessories, including cases, cameras and HAT modules
|
|
The OKdo ROCK 4C+ is a reliable, multifunctional and high-performing single-board computer based on a robust Rockchip RK3399T SoC, Dual Cortex® A72 CPU and Arm Mali™ T860MP4 GPU. |
 |
Z6385A |
|
- Microcontroller: ESP-WROOM-32 module
- USB to Serial Port Chip: CP2102-GMR
- Operating Voltage: DC 5V
- Operating Current: 80mA (average)
- Current Supply: 500mA (Minimum)
- Operating Temperature Range: -40℃ ~ +85℃
- WiFi mode: Station/SoftAP/SoftAP+Station/P2P
- WiFi protocol: 802.11 b/g/n/e/i (802.11n, speed up to 150 Mbps
- WiFi frequency range: 2.4 GHz ~ 2.5 GHz
- Bluetooth protocol: conform to Bluetooth v4.2 BR/EDR and BLE standards
- Dimensions: 55mm*26mm*13mm
- Weight: 9.3g
|
|
This board features a powerful ESP32 dual core microcontroller that has wifi and bluetooth. This allows it to have the ability to be programmed with the Arduino IDE. |
 |
K2208 |
|
- Battery: 6 x AA
- Approx Dimensions (mm): 360W x 275D x 70H
- Gross Boxed Weight: 1640g (excluding batteries)
|
|
The 130 in 1 Electronic Projects Lab Kit will start you on the road to a great hobby or career in electronics. It contains all the parts and instructions to assemble 130 educational and fun experiments and circuits. |
 |
H8930 |
|
- Supports a single SSD drive
- Accepts M.2 SSD NGFF Key B and Key B+M
- SSD Size: NGFF M.2 2280 2260 2242 2230
- Chipset: ASMedia Technologies - ASM1153E
- Compliant with USB3.0 Specification Revision 1.0
- Up to 6Gbps transfer speeds
- 2 Standard (type A) HDMI Ports
- Aluminium Alloy Top for Passive Cooling
- Programmable 30mm Fan
- Programmable IR Receiver
- Clean Power Shutdown
- Multi-Function Power Button
- Power Management Modes (with always ON)
- Magnetic Top Access to GPIO Pins
- Colour Coded GPIO Pins
- Easy Installation
|
|
A R-Pi 4 enclosure supporting one M.2 SATA SSD drive, plus two full size HDMI ports, power management modes and built in IR control support. Features both active and passive cooling from an internal fan and aluminium heatsinking case. |
 |
H8958 |
|
- Great for better heat dissipation on the Pi 4.
- Access to all Pi Ports: Power, Video Audio, USB, LAN, MicroSD Card.
- Slots for camera cables and GPIO access.
- Compatible with the Raspberry Pi 4 Model B.
- Includes cooling fan with header connection.
- Protective fan grill.
|
|
This compact multi-layer acrylic case suits the Raspberry Pi Model B 4 and provides access to all ports on the board. To keep your Pi cool, a 5V fan with header connection is provided, plus grill cover. |
 |
H8959 |
|
- Anodised aluminium
- Heatsink fins
- Thermal pads
- Dual 5V fans
- Easy assembly
- Very quiet
- Made for the Raspberry Pi 4
- All ports, pins & connectors accessible
- Hex bolts & Allen key included
|
|
This is an armor aluminum alloy case designed for the Raspberry Pi 4 computer model B. Features dual cooling fans. |
 |
H8952 |
|
- Sleek minimal design
- NUC-like design (all connectors are brought around to one side).
- Excellent WiFi signals thanks to the plastic base
- Brilliant passive cooling (the whole top part of the case is a heatsink)
- Built-in fan with programmable speeds
- Power button with soft-shutdown
- Accessible GPIO with colour coded pinout
|
|
This Raspberry Pi 4 Argon ONE Case not only has brilliant passive cooling (the whole top part of the case is a heatsink) but also protects the Raspberry Pi without compromising the full functionality of the motherboard. |
 |
H8954 |
|
- Anodised aluminium top and bottom case
- Heatsink fins
- Thermal pads
- Hex bolts and hex key
- Access to all ports, pins, and connectors
- Compatible with Raspberry Pi 4
|
|
This is an armor aluminum alloy case designed for the Raspberry Pi 4 computer model B. It is a great passive cooling case to help raspberry pi 4 board cooling down. |
 |
H8932 |
|
- Texas Instruments PCM5122 - 192kHz Sampling Rate/24bit Resolution DAC with 112-db SNR
- Using I2S bus, it separates clock and serial data signals resulting in a lower jitter
- Infrared and remote control via app
- Plays dsd, mp3, wav, wma, aac an many streaming services, airplay and bluetooth casting
- Supports OS, Volumio, Roon, Moode, Raspbian and many more
|
|
Turns your Pi into a high resolution network music player for MP3, FLAC, ALAC, WAV, AAC, FLAC, DSD, Audio CD and many more file types. On-board DAC for very high quality audio output. The ideal home music server for the audiophile! All aluminium case provides excellent cooling for your Pi 4. |
 |
H8967 |
|
|
|
Allows mounting of your Pi to the rear of a monitor using standard 100mm spacing VESA bolt holes. Made from laser cut acrylic plastic. Internal fan for added cooling. |
 |
H8953 |
|
|
|
A retro gaming styled Pi 4 case providing excellent cooling performance and easy access to all of the Pi’s ports. Ideal for RetroPi gaming projects. Internal fan for added cooling. |
 |
Z6422 |
|
- Dimensions: 55L x 46W x 19Hmm
- Minimum Operating Temperature: -40°C
- Maximum Operating Temperature: 85°C
- Pin Pitch: 2.54mm
- Logic Level Voltage: 5V
- Input DC Voltage: 5V
- Mounting Hole Size: M3
- Mounting Dimensions: 40/38mm
- Type: Electromechanical
- Channels: 2
- AC Rating: 10A 250V a.c.
- DC Rating: 10A 30V d.c.
- Format: TTL Voltage
|
|
This 5V relay module is suitable for integration with many types of micro control systems, including Arduino. Ideal for home appliance control. The module is perfect for common Arduino applications. |
 |
K8640 |
|
- Build volume up to 130 x 82 x 160mm
- Fast layer speed with each layer taking between 1 and 4 seconds.
- UV integrated light source
- 1620 x 2560 resolution
- Precision up to 51μm
- LCD HD screen
- Z-Axis linear rail for better stability
- Air filtration system
- Manual levelling system
- 3.5 inch full colour touch screen
|
|
Resin based 3D printers are rapidly becoming the go to tool for high resolution 3D prints. They offer a faster print process with excellent accuracy and a stronger finished product thanks to UV curing on each layer. |
 |
H8931 |
|
- M.2 SATA SSD Compatibility | Accepts any size of M.2 SATA SSD with Key-B or Key-B&M
- UASP Supported for Raspberry Pi 4 | Maximizes the high speed data transfers for Raspberry Pi 4
- Usable for all Argon ONE Cases | Simply replace the bottom with the expansion board, and SSDs will be usable (works best with Raspberry Pi 4 Cases)
|
|
SATA expansion can be screwed onto the bottom of the case to provide support for M.2 SATA SSD drives. |
 |
Z6382 |
|
|
|
Great for security or web cam projects.
Detects movement from humans or animals. Range 0-7m.
Detector angle 110°. 5V input. 32x24mm. |
 |
H8964 |
|
- High-quality, two-part ABS construction
- Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.
|
|
A compact, snap together red and white case to suit the Raspberry Pi 4 Model B development board. Designed with all connection recesses and venting. |
 |
H8952A |
|
- Sleek minimal design
- 2 x Standard 'type A' HDMI ports
- Aluminium Alloy top for passive cooling
- Programmable 30mm fan
- Clean Power Shutdown
- Multi-function power button
- Power management modes (with Always ON)
- Magnetic top access to GPIO pins
- Colour coded GPIO pins
- Easy installation
|
|
This Raspberry Pi 4 Argon ONE V2 Case not only has brilliant passive cooling (the whole top part of the case is a heatsink) but also protects the Raspberry Pi without compromising the full functionality of the motherboard. |
 |
Z6427 |
|
|
|
A handy Wi-Fi activated relay module for Arduino and other development applications. |
 |
H8950A ROHS
|
|
- Square form factor
- Compatible with Raspberry Pi B+, Pi-2, Pi-3
- Media server function with space for internal 2.5” HDD
- Multiple mount options including VESA
- Non-slip rubber feet
- LED guides for Power & Action on Pi B+ , Pi-2, Pi-3
- Internal space for addition of a HAT
- Internal space for hidden front facing Pi-Camera
- Removable panel for SD card access
- Secure/lockable Top Cover with 4 security screws
- Exceptional ventilation + space for onboard heat-sinks
- Top cover with easy clip system for PCB access if required
- Recessed pockets for access to all external connectors
|
|
A square case for your Raspberry Pi with internal 2.5&rdquo HDD bay and space for HATs & a camera. Ideal for desktop use, may also be VESA mounted. |
 |
P1023 |
|
|
|
Keeps your cables neater, peel off as many as you need for prototyping your design. Socket to socket type. 150mm. |
 |
P1021 |
|
|
|
Keeps your cables neater, peel off as many as you need for prototyping your design. Pin to socket type. 175mm. |
 |
P1022 |
|
|
|
Keeps your cables neater, peel off as many as you need for prototyping your design. Pin to pin type. 175mm. |
 |
ZW6240A NEW
|
|
- Form factor compatible with earlier series of Arduino boards for compatibility with existing shields and projects.
- Expanded memory and faster clock speed
- Extra on-board peripherals including 12-bit DAC, CAN BUS and OP Amp.
- Wider input voltage range for integration with motors, LED strips and actuators.
- HID support for keystrokes and mouse movement.
- Wi-FI and Bluetooth connectivity on board.
- Qwiic connector for I2C compatible sensors and actuators.
- LED matrix on board.
- Supports battery powered RTC.
|
|
The Funduino UNO R4 with WiFi is an Arduino compatible board integrating the powerful RA4M1 microcontroller with the robust wireless capabilities of the ESP32-S3 from Espressif. Additionally, it features an on-board 12x8 LED matrix, a Qwiic connector, a VRTC, and an OFF pin, making it an ideal choice for all your maker projects. |
 |
Z6317 NEW
|
|
- 3-digit display of temperature
- Module can operate in a heating or cooling mode of operation
- Multiple parameters can be set such as temp trip point, hysteresis and delay.
- Waterproof NTC temperature sensor has -30 to +110°C measurement range with 0.1°C accuracy
- Relay switches up to 120VAC @ 10A or 14VDC @ 10A
- 12V module operation
|
|
This high precision temperature control module is a highly functional self-contained temperature controller module for both heating and cooling applications. |
 |
X3090 |
|
- Amazing fun for the whole family for less than $20!
- Soft edges wont damage/mark furniture or walls.
- Hovers across smooth floors.
- Recreate the feats of your world cup heroes in your house.
- Runs off standard AA batteries (4 of, not included).
|
|
Do you wish you could turn your lounge room into one gigantic air hockey table? Well the amazing hoverball will do it! It glides along on a cushion of air on hardwood and tile surfaces (even low pile carpet). |
 |
X3063 NEW
|
|
- 2.4G remote control, suitable for indoor and outdoor flight, can be played in the bedroom.
- Equipped with high-precision gyro control
- With landing gear, can take off in a short distance.
- Has lights on the bottom.
- Mini size, small turning radius for indoor flight.
- High and low-speed modes
- Very easy to control. Slow indoor flight, fast outdoor flight, with adjustable flight attitude structure at the tail.
- Can perform rolling stunts.
- Can perform leaf fall drifting
- Can perform cobra aerobatic flight.
|
|
Experience the thrill of flying with this remote control plane! This ingeniously designed plane operates at 2.4GHz, featuring a double-wing design for precise speed control and optimal flight stability. |
 |
Z6315A NEW
|
|
|
|
A handy parts kit containing everything you need to start learning Arduino and building projects. Includes a huge selection of sensor boards, LEDs, pots, jumper wires, a breadboard, LCD screen and much more! |
 |
A0713 NEW
|
|
- Operating voltage: 12 - 15 V/DC
- Current consumption: approx. 20 mA / 80 mA (relay off / on)
- Adjustable time: approx. 2 sec. to 23 min., (± 30 %)
- Connection: via flat-pin plug at the module
- LED: 2 (1 x LED operating voltage, 1 x LED relay “ON”)
- Relay point: 1 x ON, max. 3A, max 25V
- Dimensions: approx. 87 x 60 x 33 mm (with flanges)
|
|
Avoid the hassle with this pre-assembled timing controller, conveniently packaged in a compact and reliable form. It's easy to connect and versatile enough to adapt to your requirements. The start and stop functions are managed by simple switching contacts, and the relay output can control devices up to 25VDC at 3A. |
 |
X3062 |
|
- Rider included
- Left/Right Turning
- Variable Speed
- Built-in 3.7V Lithium Battery
- Micro USB Charging lead included
|
|
Your kids will have lots of fun with this 2.4GHz remote control motorbike. Not only can it swing left and right but it also features variable speed. |
 |
X3061 NEW
|
|
|
|
Barrel up rough terrain with this remote control dune buggy thats perfect for small kids and big kids! 1:43 scale. |
 |
Z6240A NEW
|
|
- Form factor compatible with earlier series of Arduino boards for compatibility with existing shields and projects.
- Expanded memory and faster clock speed
- Extra on-board peripherals including 12-bit DAC, CAN BUS and OP Amp.
- Wider input voltage range for integration with motors, LED strips and actuators.
- SWD connector for debugging.
- HID support for keystrokes and mouse movement.
|
|
Introducing the Funduino UNO R4 Minima compatible Arduino board. Equipped with the RA4M1 microprocessor, this board offers enhanced processing power, expanded memory, and more, all while maintaining the reliable UNO form factor and practical 5V operating voltage. Get ready for a remarkable upgrade! |
 |
J0080 NEW
|
|
- Working Temperature: 0℃ - 40 ℃
- Motor voltage: 12VDC
- Motor current: 200-300mA
- Flow Rate : >80ml/min
- Tube Size : 5mm tube
- Pump Head Material : ABS
- Pump Pipe : Transparent silicone pipe
- Pulsations : Three roller
|
|
This 12V Peristaltic Water Dosing Pump can be used in a variety of applications. |
 |
K8671 NEW
|
|
- Build more than 72 robots from simple to complex, which contains a lot of robot knowledge such as machinery, gears, structure, transmission, etc.
- Enhance children's hand-on ability, DIY and logical thinking ability
- Different combinations of the motor and sensors greatly stimulate kids' to think scientifically.
- The control module of this educational toy also known as the "Intelligent Motor", contains 2 operation modes:"Electrical Mode" and "Intelligent Mode". The electric part makes it an excellent and amusing toy while the intelligent part is what specifically makes it SMART and DIFFERENT. (Batteries NOT included).
- Both the blocks and motor are compatible with almost all building sets. Spectacularly, with the great compatibility of the Intelligent Motor, it can power up motionless robots and make them move!
- Allows kids to explore grow their imaginations by building and creating projects by themselves
- With the Makerzoid App from App Store and Google Play, kids can assemble the robots easily through the graphic instructions and control the motorized robot to move in all directions with the robotics kit.
- Available through the free app, Scratch 3.0 reduces the difficulty of coding - just to drop a few orders into the "Coding" section then the robot can react on your demand.
- This set is packed in a storage box to help children develop a good habit of packing and collecting their own toys.
|
|
This 300pc set contains the parts for 72 different project designs which can be built using Makerzoids 3D app tutorials. |
 |
K8673 NEW
|
|
- Build more than 200 robots from simple to complex, which contains a lot of robot knowledge such as machinery, gears, structure, transmission, etc.
- Both Children and parents will enjoy the fun of building a robot and making a programming for it.
- Helps develop children's mind, DIY and logical thinking ability.
- Set is equipped with 47 robotics courses for kids to learn how to build, control and code at home while playing with this toy set.
- Incorporates 2 integrated motors and 2 IR sensors (batteries NOT included) to allow for intelligent, smooth moving robotic projects
- Allows kids to explore grow their imaginations by building and creating projects by themselves
- With the Makerzoid App from App Store and Google Play, kids can assemble the robots easily through the graphic instructions and control the motorized robot to move in all directions with the robotics kit.
- Available through the free app, Scratch 3.0 reduces the difficulty of coding - just to drop a few orders into the "Coding" section then the robot can react on your demand.
- The set is packed in a big storage box to help children develop a good habit of packing and collecting their own toys. And the sorting plate will be less time-consuming because kids could organize the building blocks based on the colour and size.
|
|
Build up to 200 different projects or create your own! Great for inspiring kids to invent and design with staged learning from the basics up to advanced Scratch programming. Each set contains hundreds of blocks, plus multifunction sensors, programmable motor and host controller. Compatible with big brand name blocks.
|
 |
K8670 NEW
|
|
- Over 26 robots can be assembled as well as custom projects
- Incorporates 2 integrated motors and 2 IR sensors (batteries NOT included) to allow for intelligent, smooth moving robotic projects
- Allows kids to explore grow their imaginations by building and creating projects by themselves
- With the Makerzoid App from App Store and Google Play, kids can assemble the robots easily through the graphic instructions and control the motorized robot to move in all directions with the robotics kit.
- Available through the free app, Scratch 3.0 reduces the difficulty of coding - just to drop a few orders into the "Coding" section then the robot can react on your demand.
- Superbot brings you endless fun in building, playing then battling with their car models together which makes it the new pop in any kids' theme party.
- The set is packed in a clear storage box to help children develop a good habit of packing and collecting their own toys.
|
|
A 400pc set allowing kids to build up to 26 different projects, and create designs of their own. Includes control unit and intelligent sensors (2) that allow building of line tracking, obstacle avoiding and following robot designs. Blocks are compatible with other major brands. Fully programmable using Scratch. Includes storage box. |
 |
J0085 NEW
|
|
- Sensor Type: Hall effect
- Working Voltage: 5 to 18V DC (min tested working voltage 4.5V)
- Max current draw: 15mA @ 5V
- Output Type: 5V TTL
- Working Flow Rate: 1 to 30 Litres/Minute
- Working Temperature range: -25 to +80℃
- Working Humidity Range: 35%-80% RH
- Accuracy: ±10%
- Maximum water pressure: 2.0 MPa
- Output duty cycle: 50% +-10%
- Output rise time: 0.04us
- Output fall time: 0.18us
- Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min)
- Pulses per Litre: 450
- Durability: minimum 300,000 cycles
- Cable length: 150mm
- 1/2″ nominal pipe connections, 0.78″ outer diameter, 1/2″ of thread
- Size: 63.5 x 35.5 x 35.5mm
|
|
The YF-S201 Hall Effect Water Flow Meter Sensor comes with three wires: red (5-24VDC power), black (ground) and yellow (Hall effect pulse output). |
 |
Z6316 NEW
|
|
- Easy to set up and pair - Android or iOS eWeLink app available for direct control.
- Onboard Bluetooth status indicator and relay indicator.
- With 2 optocoupler isolation, strong anti-interference ability.
- Onboard N76E003/STM8S003 and SPP-C Bluetooth 2.1 module.
- Compact board design.
- Module with diode effusion protection short response time
|
|
A combined relay and control board with the ability to switch on and off connected loads using an App on your phone via Bluetooth. The eWeLink app offers seamless power switching using your device when in range of the relay board (typically 10m). |
 |
SA0910 NEW
|
|
- Switch Type: SPST microswitch
- Connection: 6.3mm spade
- Illumination: 5-12V input
- Max material thickness: 30mm
- Mounting Hole: 27.5mm
- Mounting depth: 61mm
|
|
Ideal for use in retro gaming projects or anywhere a jumbo momentary switch may be required. |
 |
SA0915 NEW
|
|
- Switch Type: SPST microswitch
- Connection: 6.3mm spade
- Illumination: 5-12V input
- Max material thickness: 30mm
- Mounting Hole: 27.5mm
- Mounting depth: 61mm
|
|
Ideal for use in retro gaming projects or anywhere a jumbo momentary switch may be required. |
 |
SA0911 NEW
|
|
- Switch Type: SPST microswitch
- Connection: 6.3mm spade
- Illumination: 5-12V input
- Max material thickness: 30mm
- Mounting Hole: 27.5mm
- Mounting depth: 61mm
|
|
Ideal for use in retro gaming projects or anywhere a jumbo momentary switch may be required. |
 |
SA0914 NEW
|
|
- Switch Type: SPST microswitch
- Connection: 6.3mm spade
- Illumination: 5-12V input
- Max material thickness: 30mm
- Mounting Hole: 27.5mm
- Mounting depth: 61mm
|
|
Ideal for use in retro gaming projects or anywhere a jumbo momentary switch may be required. |
 |
SA0913 NEW
|
|
- Switch Type: SPST microswitch
- Connection: 6.3mm spade
- Illumination: 5-12V input
- Max material thickness: 30mm
- Mounting Hole: 27.5mm
- Mounting depth: 61mm
|
|
Ideal for use in retro gaming projects or anywhere a jumbo momentary switch may be required. |
 |
SA0912 NEW
|
|
- Switch Type: SPST microswitch
- Connection: 6.3mm spade
- Illumination: 5-12V input
- Max material thickness: 30mm
- Mounting Hole: 27.5mm
- Mounting depth: 61mm
|
|
Ideal for use in retro gaming projects or anywhere a jumbo momentary switch may be required. |
