|
Description |
Downloads |
Specs |
Ordering |
|
 |
S5621 ROHS
|
|
|
|
Current Trip Rating: 1.5 Amp
All specifications at 25°C
Hold Current: 100% load indefinitely
Trip Current: Within 1 hr @ 175% load
Within 1 minute @ 200% load
Max. Voltage: 120V AC or 12V DC
Dimensions: 20.6H x 10.5L x 8.7W mm |
 |
S1054 |
|
- Switch Type: DPDT Centre Off
- Contact Rating: 6A @ 250V AC
- Mounting Hole Diameter: 12mm
|
|
DPDT switch with On-Off-Mom On plate. Locks on in both directions. With metal actuator. |
 |
S3300 ROHS
|
|
- Temperature Range: -10°C to +65°C
- Carry Current: 1 Amp max
- Switch Capacity: 0.1 A @ 50V AC/28V DC
- Contact Resistance: 200mΩ max.
- Dielectric Strength: 600V AC for 1 min.
- Mechanical Life: 100,000
- Electrical Life: 50,000
|
|
Panel mount BCD coded units which slot together to produce a bank of switches. Each unit is engraved (white on black). Output is 8-4-2-1 weighting.Gold plated PCB tracks and connections. Cutout for one unit plus end caps 16 x 30mm. Allow further 8mm per u |
 |
S4101A |
|
- Max switching voltage: 100V DC
- Max switching current: 1A DC
- Max VA (Watts): 10VA
- Contact material: Rhodium Alloy
- Coil resistance: 1050Ω
- Max coil power: 500mw
- Insulation resistance: >1000MΩ@ 500V DC
- Dielectric strength (for 1 min):
- 150V AC between open contacts
- 1000V AC between coil & contact
- Electrical life: 10 million operations
- Mechanical life: 10 million operations
- Dimensions:˜20W x 8L x 6H mm
|
|
Fully sealed construction (immersion cleanable).
DIL pitch terminals. |
 |
S4101 |
|
- Max switching voltage: 100V DC
- Max switching current: 0.5A DC
- Max VA (Watts): 10VA
- Coil resistance: 1050Ω
- Max coil power: 500mw
- Insulation resistance: >1000MΩ@ 500V DC
- Dielectric strength (for 1 min):
- - 150V AC between open contacts
- - 1000V AC between coil & contact
- Electrical life: 10 million operations
- Dimensions: 20W x 8L x 6H mm
|
|
Fully sealed construction (immersion cleanable).
DIL pitch terminals. |
 |
S4100A |
|
- Max Switching Voltage: 100V DC
- Max Switching Current: 1A DC
- Max VA (Watts): 10VA
- Contact Material: Rhodium Alloy
- Coil Resistance: 500Ω
- Max Coil power: 500mw
- Insulation resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 150V AC between open contacts
- 1000V AC between coil & contact
- Electrical Life: 10 million operations
- Mechanical Life: 10 million operations
- Dimensions:˜20W x 8L x 6H mm
|
|
Fully sealed construction (immersion cleanable).
DIL pitch terminals. |
 |
S4100 |
|
- Max Switching Voltage: 100V DC
- Max Switching Current: 1A DC
- Max VA (Watts): 10VA
- Contact Material: Rhodium Alloy
- Coil Resistance: 500Ω
- Max Coil power: 500mw
- Insulation resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 150V AC between open contacts
- 1000V AC between coil & contact
- Electrical Life: 10 million operations
- Mechanical Life: 10 million operations
- Dimensions:˜20W x 8L x 6H mm
|
|
Fully sealed construction (immersion cleanable).
DIL pitch terminals. |
 |
S3021 ROHS
|
|
- Shaft Diameter: 6.35mm
- Shaft Length: 30mm
- Shaft Shape: Round with knob location flat
- Contact Timing: Break before make
- Contact Rating: 150mA @ 250V AC
- Contact Type: Silver Plated
- Max. Working Voltage: 300V
- Termination: 1.2 mm PCB Pins
|
|
User Selectable Configuration
Each switch includes a toothed washer with a mating series of sockets in the switch housing to enable the switch to be configured to your specific requirement. |
 |
S3302 ROHS
|
|
- Temperature Range: -10°C to +65°C
- Carry Current: 1 Amp max
- Switch Capacity: 0.1 A @ 50V AC/28V DC
- Contact Resistance: 200mΩ max.
- Dielectric Strength: 600V AC for 1 min.
- Mechanical Life: 100,000
- Electrical Life: 50,000
|
|
Panel mount Decimal coded units which slot together to produce a bank of switches. Each unit is engraved (white on black). Output is 8-4-2-1 weighting.Gold plated PCB tracks and connections. Cutout for one unit plus end caps 16 x 30mm. Allow further 8mm p |
 |
S3065 ROHS
|
|
- Rating: 50V DC 100mA continuous, 24V DC 25mA switching
- Contact Resistance: 30m Ohm max. initially @ 100mA
- 100m Ohm max. after life test
- Insulation Resistance: 1000M Ohm min.
- Operation Life: Average 10,000 min.
- Capacitance: 5pF max. between adjacent terminals
- Dielectric Breakdown Voltage: 500V DC min.
- Operation Force: 500g max
- Case, Cover & Actuators: UL94-VO, PBT plus glass fibre
- Terminals: Gold plated phosphor bronze
|
|
Gold plated contacts and pins. Durable self wiping contacts. |
 |
S5614 ROHS
|
|
|
|
Self resetting. Breaks at 100C. 10 amps 250V AC. Mounting hole centres 23.5mm. Contact surface 16mm. Normally Closed Contact, Auto Reset. |
|
S5598 ROHS
|
|
|
|
Self resetting. Breaks at 100C. 10 amps 250V AC. Mounting hole centres 23.5mm. Contact surface 16mm. Normally Open Contact, Auto Reset. |
 |
S4345 NEW
|
|
- Max DC switching: 75V @ 100A / 1400W
- Contact material: Silver alloy
- Coil resistance: 60Ω
- Max coil power: 2.4W
- Insulation resistance: >100MΩ @ 500V DC
- Dielectric strength (for 1 min): 500V AC between open contacts
- 750V AC between coil & contact
- Connection: (Coil 6.3mm & M6 bolt for contact load)
- Life: 100,000 operations electrical, 10 million mechanical
- Dimensions: ≈46W x 46L x 77H mm
|
|
Suitable for high current DC automotive applications. Not suitable for AC use. M6 bolt for contact load connection. 6.3mm spade terminals for contact coil connection. |
 |
S4344 NEW
|
|
- Max DC switching: 75V @ 100A / 2800W
- Contact material: Silver alloy
- Coil resistance: 30Ω
- Max coil power: 4.8W
- Insulation resistance: >100MΩ @ 500V DC
- Dielectric strength (for 1 min): 500V AC between open contacts
- 750V AC between coil & contact
- Connection: (Coil 6.3mm & M6 bolt for contact load)
- Life: 100,000 operations electrical, 10 million mechanical
- Dimensions: ≈46W x 46L x 77H mm
|
|
Suitable for automotive applications such as alarms, driving lights, horns, fog lights etc. |
 |
S5878 ROHS
|
|
- Max. Voltage: 42V DC
- Rating: 100A DC
- Interrupt Rating: 3000A @ 30V DC
- IP Rating: IP67
- Operating Temperature: -32°C to 92°C
- Testing: SAE J1625, SAE1171 (ignition protected)
- Material: UL94V-0
- RoHS approved.
- External Dimensions: 70 x 50 x 35mm
|
|
High current weatherproof circuit breakers with manual reset switch. M6 terminal bolts. |
 |
S5890 ROHS
|
|
- Max. Voltage: 42V DC
- Interrupt Rating: 3000A @ 30V DC
- Operating Temperature: -32°C to 82°C
- Testing: SAE J1625, SAE J1171 (ignition protected)
- IP Rating: IP67
- Material: UL94V-0
- RoHS approved
- UL approved 100A @ 32V DC
- External Dimensions: 70 x 50 x 35mm
|
|
High current weatherproof circuit breakers with manual reset switch. M6 terminal bolts. |
 |
S1160B |
|
- Diameter of thread: ~15.5mm
- Switch type: SPST
- Switching current: 1.0A DC
- Contact rating: 1.0A @ 100VDC (Max)
- Contact resistance: 100mΩ
- Insulation resistance: >10^10 Ω
- Magnetic sensitivity: 20 - 50 AT
- Operate time: 0.35ms
- Flying lead length: 300mm
- Temperature Rating: -10 to 85 degrees C
|
|
Fully immersible. Ideal for water tank systems such as rain or waste water management, activating boat bilge pumps etc. Can be used to control pumps or electric valves when liquid levels change. |
 |
S1160C |
|
- Diameter of thread: ~15.5mm
- Switch type: SPST
- Switching current: 1.0A DC
- Contact rating: 1.0A @ 100VDC (Max)
- Contact resistance: 100mΩ
- Insulation resistance: >10^10 Ω
- Magnetic sensitivity: 20 - 50 AT
- Operate time: 0.35ms
- Flying lead length: 300mm
- Temperature Rating: -10 to 85°C
|
|
Fully immersible. Ideal for water tank systems such as rain or waste water management, activating boat bilge pumps etc. Can be used to control pumps or electric valves when liquid levels change. |
 |
S5567 |
|
- Type: Automatic reset
- Terminals: 2 x #10 - 32 UNF stud.
- Rating: 10A @ 12/24V DC.
- Operating temperature: -23°C to 65°C
- Application: Battery chargers, vehicles.
- Test compliance: SAE standard J553 (type 1)
|
|
Single pole stud type 10A DC circuit breaker with surface mounting tabs. Ideal for use in vehicles. Auto reset. Current ratings at 12V/24V DC. Meets SAE J553 standard (Type 1). M10 x 32mm stud connection. Includes hardware. |
 |
S5544 ROHS
|
|
- Rating: 10A, 28V DC.
- Colour: Light Brown
- Interrupt Rating: 100A @ 28V DC.
- Operating Temperature Rating: -40°C to 85°C
- Storage Temperature Rating: -40°C to 125°C
- Testing Standard: SAE J553
|
|
Suits most automotive blade fuse holders. Resettable, 5mm blades. |
 |
S4310 ROHS
|
|
- Max Switching Voltage: 300V AC, 30V DC
- Max Switching Current: 20A (total)
- Max VA (Watts): 280VA (280W)
- Contact Material: Silver Cadmium Oxide
- Coil Resistance: 160Ω
- Max Coil Power: 900mW
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min): 1000V AC between open contacts
- 1500V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 20 million operations
|
|
Features Inbuilt LED indicator |
 |
S4311 ROHS
|
|
- Max Switching Voltage: 300V AC, 30V DC
- Max Switching Current: 20A (total)
- Max VA (Watts): 280VA (280W)
- Contact Material: Silver Cadmium Oxide
- Coil Resistance: 160Ω
- Max Coil Power: 900mW
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 1500V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 20 million operations
|
|
Max voltage: 300V AC, 30V DC
Max current: 20A (total)
Max VA (Watts): 280VA (280W)
Contact material: Silver Cadmium Oxide
Coil resistance: 160Ω
Max coil power: 900mW
Insulation resistance: >1000MO@ 500V DC
Dielectric strength (for 1 min):
1000V AC between open contacts
1500V AC between coil & contact
Electrical life: 100,000 operatio |
 |
S4202B ROHS
|
|
- Max Switching Voltage: 380V AC, 110V DC
- Max Switching Current: 10A
- Max VA (Watts): 2400VA (336W)
- Contact Material: Silver Nickel
- Coil Resistance: 400Ω
- Max Coil Power: 360mw
- Insulation Resistance: >500MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 2500V AC between coil & contact
- Electrical Life: 100,000 operations 5A 24V
- Mechanical Life: 10 million operations
- Dimensions: 22W x 17L x 15H mm
|
|
Non-Sealed type, suitable for flow soldering |
 |
S4160C ROHS
|
|
- Max switching voltage ac: 380V
- Max switching voltage dc: 110V
- Max switching current ac: 10A
- Max switching current dc: 10A
- Max switching power ac: 2500VA
- Max switching power dc: 420W
- Contact material: Silver alloy
- Coil resistance (12V): 400Ω
- Max coil power: 360mW
- Insulation resistance: >250MΩ @ 500V dc
- Dielectric strength (for 1 min):
- 750V ac between open contacts
- 1500V ac between coil & contact
- Electrical life: 100,000 operations
- Mechanical life: 10 million operations
- Dimensions: ≈19.5W x 15.6L x 15.3H mm
|
|
Non-sealed type, suitable for flow soldering |
 |
S4314 ROHS
|
|
- Max Switching Voltage: 300V AC, 30V DC
- Max Switching Current: 20A (total)
- Max VA (Watts): 280VA (280W)
- Contact Material: Silver Cadmium Oxide
- Coil Resistance: 15,210Ω
- Max Coil Power: 1.2W
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min): 1000V AC between open contacts
- 1500V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 20 million operations
|
|
Features Inbuilt LED indicator |
 |
S4315 ROHS
|
|
- Max Switching Voltage: 300V AC, 30V DC
- Max Switching Current: 20A (total)
- Max VA (Watts): 280VA (280W)
- Contact Material: Silver Cadmium Oxide
- Coil Resistance: 184Ω
- Max Coil Power: 1.2VA
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min): 1000V AC between open contacts
- 1500V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 20 million operations
|
|
Features Inbuilt LED indicator |
 |
S4312 ROHS
|
|
- Max Switching Voltage: 300V AC, 30V DC
- Max Switching Current: 20A (total)
- Max VA (Watts): 280VA (280W)
- Contact Material: Silver Cadmium Oxide
- Coil Resistance: 640Ω
- Max Coil Power: 900mW
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min): 1000V AC between open contacts
- 1500V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 20 million operations
|
|
Features Inbuilt LED indicator |
 |
S4313 ROHS
|
|
- Max Switching Voltage: 300V AC, 30V DC
- Max Switching Current: 10A (total)
- Max VA (Watts): 280VA (280W)
- Contact Material: Silver Cadmium Oxide
- Coil Resistance: 640Ω
- Max Coil Power: 900mW
- Insulation Resistance: >1000MΩ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 1500V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 20 million operations
|
|
Features Inbuilt LED indicator |
 |
S4175A ROHS
|
|
- Max switching voltage: 240V AC, 110V DC
- Max switching current: 10A
- Max VA (Watts): 1200VA (300W)
- Contact material: Silver Cadmium Oxide
- Coil resistance: 820Ω
- Max coil power: 720mw
- Insulation resistance: >100MΩ @ 500V DC
- Dielectric strength (for 1 min):
- 1000V AC between open contacts
- 5000V AC between coil & contact
- Electrical life: 100,000 operations
- Mechanical life: 10 million operations
- Dimensions: ˜29.1W x 13L x 20.6H mm
|
|
Non-sealed type, suitable for flow soldering |
 |
S4204B ROHS
|
|
- Max Switching Voltage: 380V AC, 110V DC
- Max Switching Current: 10A
- Max VA (Watts): 2400VA (336W)
- Contact Material: Silver Nickel
- Coil Resistance: 1600Ω
- Max Coil Power: 360mw
- Insulation Resistance: >500MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 2500V AC between coil & contact
- Electrical Life: 100,000 operations 5A 24V
- Mechanical Life: 10 million operations
- Dimensions: 22W x 17L x 15H mm
|
|
Non-Sealed type, suitable for flow soldering |
 |
S4162C |
|
- Max switching voltage ac: 380V
- Max switching voltage dc: 110V
- Max switching current ac: 10A
- Max switching current dc: 10A
- Max switching power ac: 2500VA
- Max switching power dc: 420W
- Contact material: Silver alloy
- Coil resistance (24V): 1600Ω
- Max coil power: 360mW
- Insulation resistance: >250MΩ @ 500V dc
- Dielectric strength (for 1 min):
- 750V ac between open contacts
- 1500V ac between coil & contact
- Electrical life: 100,000 operations
- Mechanical life: 10 million operations
- Dimensions: ≈19.5W x 15.6L x 15.3H mm
|
|
Non-sealed type, suitable for flow soldering |
 |
S5590 ROHS
|
|
- Hold Current: 100% load indefinitely
- Trip Current: Within 1 hr @ 135% load
- Within 1 minute @ 200% load
- Neon Voltage: 250V AC
- Max. Voltage: 250V AC or 50V DC
- Panel Cutout: 13.35mm x 28.5mm
- Dimensions: 33H x 32L x 15.5W mm
- All specifications at 25°C.
|
|
Combination illuminated switch and circuit breaker all in one compact package. |
 |
S5560 ROHS
|
|
- Hold Current: 100% load indefinitely
- Trip Current: Within 1 hr @ 135% load
- Within 1 minute @ 200% load
- Max. voltage: 250V AC or 32V DC
- Dimensions: 52L x 13.5H x 15.5W
- All specifications at 25°C.
|
|
Snap-in fitting with coloured button. |
 |
S5510 ROHS
|
|
- UL, CSA, VDE approved
- RoHS approved
- Rating at 250V AC or 50V DC
- Black plastic actuator button
- Supplied with all mounting hardware
- Quick connect 6.3mm terminals
- Includes ID plate
|
|
All specifications at 25°C
Hold Current: 100% load indefinitely
Trip Current: Within 1 hr @ 145% load
Within 1 minute @ 200% load
Max. Voltage: 250V AC or 50V DC
Panel Cutout: Single hole mount 12mm Ø
Dimensions: 36H x 31L x 15W mm |
 |
S5630 ROHS
|
|
|
|
Current Trip Rating: 10 Amp
All specifications at 25°C
Hold Current: 100% load indefinitely
Trip Current: Within 1 hr @ 175% load
Within 1 minute @ 200% load
Max. Voltage: 120V AC or 12V DC
Dimensions: 20.6H x 10.5L x 8.7W mm |
 |
S5150A ROHS
|
|
|
|
Approx. 10mm in size, leads 4mm shorter than S5150. 0.5A 100V DC rating. |
 |
S5144 |
|
|
|
Adjustable Pin Switch (from 11.5 to 29mm, 8mm travel), similar to car courtesy light switches. Suits car alarms (for boot and bonnet) etc.
Mounting hole 7.5mm. |
 |
S2541 |
|
|
|
Key removable in locked position.
|
 |
S5381 ROHS
|
|
- Contacts: Conductive rubber
- Rating: 20mA @ 24V DC
- Contact Resistance: 200 Ohms Max
- Key Face Dimensions: 46 x 57mm
- Life Expectancy: 10 million operations per key
|
|
3 x 4 way matrix. As used with DTMF telephones and security applications. |
 |
S3068 ROHS
|
|
- Rating: 50V DC 100mA continuous, 24V DC 25mA switching
- Contact Resistance: 30m Ohm max. initially @ 100mA
- 100m Ohm max. after life test
- Insulation Resistance: 1000M Ohm min.
- Operation Life: Average 10,000 min.
- Capacitance: 5pF max. between adjacent terminals
- Dielectric Breakdown Voltage: 500V DC min.
- Operation Force: 500g max
- Case, Cover & Actuators: UL94-VO, PBT plus glass fibre
- Terminals: Gold plated phosphor bronze
|
|
Gold plated contacts and pins. Durable self wiping contacts. |
 |
S4455 |
|
|
|
The S 4455 is a DIN rail mountable relay box with 2 sets of voltage free changeover contacts. Each set of contact terminals have a N/O (normally open), N/C (normally closed) and a common connection. |
 |
S4260 ROHS
|
|
- Max switching voltage: 250V AC, 110V DC
- Max switching current: 12A
- Max VA (Watts): 3000VA (360W)
- Contact material: Silver Alloy
- Coil resistance: 360Ω
- Max coil power: 400mw
- Insulation resistance: >100MΩ@ 500V DC
- Dielectric strength (for 1 min):
- 1000V AC between open contacts
- 5000V AC between coil & contact
- Electrical life: 100,000 operations
- Mechanical life: 10 million operations
- Dimensions: ˜29W x 12.5L x 15.5H mm
|
|
Non-sealed type, suitable for flow soldering |
 |
S4260A ROHS
|
|
- Max Switching Voltage AC: 440V
- Max Switching Voltage DC: 125V
- Max Switching Current AC: 12A
- Max Switching Current DC: 12A
- Max Switching Power AC: 600VA
- Max Switching Power DC: 480W
- Contact Material: Silver alloy
- Coil Resistance (12V): 351Ω
- Max Coil Power: 400mW
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 5000V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 10 million operations
- Dimensions: 29W x 12.7L x 15.7H mm
|
|
Non-sealed type, suitable for flow soldering |
|
S4262 ROHS
|
|
- Max switching voltage: 250V AC, 110V DC
- Max switching current: 12A
- Max VA (Watts): 3000VA (360W)
- Contact material: Silver Alloy
- Coil resistance: 1440Ω
- Max coil power: 400mw
- Insulation resistance: >100MΩ@ 500V DC
- Dielectric strength (for 1 min):
- 1000V AC between open contacts
- 5000V AC between coil & contact
- Electrical life: 100,000 operations
- Mechanical life: 10 million operations
- Dimensions: ˜29W x 12.5L x 15.5H mm
|
|
Non-sealed type, suitable for flow soldering |
 |
S4262A ROHS
|
|
- Max Switching Voltage AC: 440V
- Max Switching Voltage DC: 125V
- Max Switching Current AC: 12A
- Max Switching Current DC: 12A
- Max Switching Power AC: 600VA
- Max Switching Power DC: 480W
- Contact Material: Silver alloy
- Coil Resistance (12V): 1405Ω
- Max Coil Power: 400mW
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 5000V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 10 million operations
- Dimensions: 29W x 12.7L x 15.7H mm
|
|
Non-sealed type, suitable for flow soldering |
 |
S0084 |
|
- • Adjustable flash interval
- • 12- 24V DC operation
- • Compact design, only 50W x 70H x 27D mm.
|
|
A handy circuit designed to flash indicator lights on and off at intervals between 200ms and 2 seconds. |
 |
S0101 |
|
- Timer can be set from 1 second to 60 minutes
- Can be triggered by positive voltage (+DC), or closure or opening of dry contact
- Relay can be programmed to activate at the start or at the end of the timing cycle
- Relay can also be set to activate for one second at the end of the timing cycle
- Programmable for pulse (flash) activation
- Built-in reset function to manually reset timing cycle
- Form C relay, contacts rated 8A@120VAC/24VDC
- LED indicates relay is energized
- 12VDC/24VDC Operation (auto sensing)
- Current: 1mA (standby), 50mA (active)
- Board measures 73x63 mm
- Functions programmed via DIP switches – no jumpers to cut
|
|
There are numerous situations that require the use of a timer. The S 0101 offers several modes of operation which the user can easily program. It is suitable for use with either 12 or 24V. |
 |
S0090 |
|
- Rating: 3A 24VDC
- Timer duration: 1-180s
- Trigger: NC or NO
- Input: 12-24V AC/DC
- Connections: Screw terminals
- Dimensions: 30 x 55 x 16mm
|
|
A low voltage miniature timer module which operates on 12-24V AC or DC. It may be used to modify the activation time of a momentary contact switch for 1-180 seconds, adjustable via onboard variable resistor. May be triggered by a NC or NO contact. Switche |
 |
S4244 |
|
- Max AC Rating: 0.5A @ 125V
- Max DC Rating: 2A @ 30V
- Max Switching Power AC: 62VA
- Max Switching Power DC: 60W
- Contact Material: Silver palladium + Gold plated
- Coil Resistance (12V): 1028Ω
- Max Coil Power: 200mW
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 1600V AC between coil & contact
- Life: 100,000 electrical 0.5A 125V, 10 million mechanical
- Dimensions: 10W x 6.5L x 5.4H mm
|
|
Max AC rating: 0.5A @ 125V
Max DC rating: 2A @ 30V
Max switching power AC: 62VA
Max switching power DC: 60W |
 |
S4443 |
|
- LED indicator
- Dual changeover contacts
|
|
The S 4443 is a handy 5 way "snap off" strip board fitted with 5x 12V (S4136) relays. Two sets of changeover contacts are provided. An on board LED illuminates when the relay is activated.
For 5V operation use S 4441 board.
For 24V operation use |
 |
S1780A ROHS
|
|
|
|
12V DC LED to suit S 1700A Series Switch |
 |
S1780 ROHS
|
|
|
|
12V Globe to suit the S1700 series switches |
 |
S4442 |
|
- LED indicator
- Dual changeover contacts
|
|
The S 4442 is a handy relay board fitted with 12V (S4136) relays. Two sets of changeover contacts are provided. An on board LED illuminates when the relay is activated.
For 5 way "snap off" strip relay board see S 4443.
For 5V operation use S 4440 b |
 |
S0082 |
|
- Easy to set up
- Multiple operating modes
- Up to 24 hour timing duration
- DIN mount enclosure
- 12-24VDC operation
- 5A relay contacts
- Includes Power Supply
|
|
This compact 12-24VDC timer has a multitude of operating modes. |
 |
S4402A ROHS
|
|
- Max switching voltage: 380V AC, 42V DC
- Max switching current: 10A
- Max VA (Watts): 1250VA (280W)
- Contact material: Silver Cadmium Oxide
- Coil resistance: 240Ω
- Max coil power: 600mw
- Insulation resistance: >100MΩ @ 500V DC
- Dielectric strength (for 1 min):
- 500V AC between open contacts
- 500V AC between coil & contact
- Electrical life: 100,000 operations
- Mechanical life: 10 million operations
- Dimensions:˜15W x 12L x 12Hmm
|
|
Non-Sealed type, suitable for flow soldering |
 |
S4347 |
|
- Max Switching Voltage dc: 75V
- Max Switching Current dc: 150A
- Max Switching Power dc: 1800W
- Contact Material: Silver tin dioxide
- Coil Resistance (12V): 50Ω
- Max Coil Power: 2.9W
- Insulation Resistance: >100MΩ @ 500V dc
- Dielectric Strength (for 1 min):
- 750V ac between open contacts
- 1000V ac between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 10 million operations
- Dimensions: 33W x 35L x 33H mm
- Coils: 6.3mm spade terminals
- Armature: 9.5mm spade terminals
|
|
Suitable for high current DC automotive applications. |
 |
SA4198 |
|
- 16A SPST 12V PCB Relay. Great for high current applications, experiments, new designs & projects.
|
|
16A SPST 12V PCB Relay. Great for high current applications, experiments, new designs & projects. |
 |
S4333 ROHS
|
|
- Max Switching Voltage AC: Not suitable
- Max Switching Voltage DC: 16V
- Max Switching Current AC: Not suitable
- Max Switching Current DC: 30A
- Max Switching Power AC: Not suitable
- Max Switching Power DC: 480W
- Max Continuous Current: 25A
- Contact Material: Silver Tin Dioxide
- Coil Resistance: 225Ω
- Max Coil Power: 640mw
- Insulation Resistance: >100MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 500V AC between open contacts
- 1000V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 10 million operations
- Dimensions: 7.5W x 14.5L x 14H mm
|
|
Fully sealed construction (immersion cleanable). |
 |
S4330 ROHS
|
|
- Max Switching Voltage DC: 75V
- Max Switching Current DC: 30A
- Max Switching Power DC: 420W
- Contact Material: Silver tin dioxide
- Coil Resistance: 80Ω
- Max Coil Power: 1.8W
- Insulation Resistance: >100MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 500V AC between open contacts
- 750V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 10 million operations
- Dimensions: 25.4W x 33.3L x 21.2H mm (excluding fuse and tab)
|
|
Suitable for automotive applications such as alarms, lights, etc.
Fitted with 30A blade fuse.
|
 |
S4335A ROHS
|
|
- Max Switching Voltage: 75V DC
- Max Switching Current: 30A
- Max VA (Watts): 630W
- Contact Material: Silver tin dioxide
- Coil Resistance: 90Ω
- Max Coil Power: 1.68W
- Insulation Resistance: >100MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 500V AC between open contacts
- 750V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 10 million operations
- Dimensions: ˜29W x 29L x 26H mm
|
|
Suitable for automotive applications such as alarms, lights, etc. |
 |
S4342 |
|
- Max Switching Voltage dc: 75V
- Max Switching Current dc: 50A
- Max Switching Power dc: 1120W
- Contact Material: Silver tin dioxide
- Coil Resistance (12V): 80Ω
- Max Coil Power: 1.8W
- Insulation Resistance: >100MΩ @ 500V dc
- Dielectric Strength (for 1 min):
- 500V ac between open contacts
- 500V ac between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 10 million operations
- Dimensions: 29W x 29L x 26.5H mm
|
|
Suitable for automotive applications such as alarms, driving lights, horns, fog lights etc. |
 |
S4339 ROHS
|
|
- Max Switching Voltage: 75V DC
- Max Switching Current: 60A
- Max VA (Watts): 980W
- Contact Material: Silver tin dioxide
- Coil Resistance: 80Ω
- Max Coil Power: 1.8W
- Insulation Resistance: >100MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 500V AC between open contacts
- 500V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 10 million operations
- Dimensions: 29W x 29L x 26H mm
|
|
Suitable for automotive applications such as alarms, lights, etc. |
 |
S5881 ROHS
|
|
- Max. Voltage: 42V DC
- Rating: 150A DC
- Interrupt Rating: 3000A @ 30V DC
- IP Rating: IP67
- Operating Temperature: -32°C to 92°C
- Testing: SAE J1625, SAE1171 (ignition protected)
- Material: UL94V-0
- RoHS approved.
- External Dimensions: 70 x 50 x 35mm
|
|
High current weatherproof circuit breakers with manual reset switch. M6 terminal bolts. |
 |
S5893 ROHS
|
|
- Manual Reset Design Waterproof
- Ratings: 30A to 150A; 32/42VDC
- Interrupt Rating: 3000A @ 30VDC
- Operating Temperature: -32°C to 92°C
- Storage Temperature: -34°C to 149°C
- Testing: SAE J1625, SAE J1171 (Ignition Protected)
- Housing: Thermoset plastic, UL rated 94VO
- Mounting: Panel
- Product meets RoHS
|
|
High current weatherproof circuit breakers with manual reset switch. M6 terminal bolts. |
|
SX5592 |
|
|
|
15A switch circuit breaker with spade lug connection. 15A 250V rated with 250V red neon. |
 |
S5565 ROHS
|
|
- Hold Current: 100% load indefinitely
- Trip Current: Within 1 hr @ 135% load
- Within 1 minute @ 200% load
- Max. voltage: 250V AC or 32V DC
- Dimensions: 52L x 13.5H x 15.5W
- Note: All specifications at 25°C.
|
|
Snap-in fitting with coloured button. |
|
S5515 ROHS
|
|
- UL, CSA, VDE approved
- RoHS approved
- Rating at 250V AC or 50V DC
- Black plastic actuator button
- Supplied with all mounting hardware
- Quick connect 6.3mm terminals
- Includes ID plate
|
|
All specifications at 25°C
Hold Current: 100% load indefinitely
Trip Current: Within 1 hr @ 145% load
Within 1 minute @ 200% load
Max. Voltage: 250V AC or 50V DC
Panel Cutout: Single hole mount 12mm Ø
Dimensions: 36H x 31L x 15W mm |
 |
SX5500 |
|
|
|
Rated at 15A @ 250V AC. Screw on waterproof boot. Spade lug connection. |
 |
S4240 |
|
- Max Switching Voltage AC: 440V
- Max Switching Current AC (250V): 16A (2 coil 0.6W)
- Max Switching Power AC: 4000VA
- Contact Material: Silver alloy
- Coil Resistance: 2 x 240Ω
- Max Coil Power: 0.6W
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 5000V AC between coil & contact
- Electrical Life: 50,000 operations
- Mechanical Life: 5 million operations
- Dimensions: 12.7W x 29L x 15.7H mm (excluding terminals)
|
|
Double coil magnet latching relay. Coil requires pulse with voltage equivalent to the nominal coil voltage to operate. Ensure latch and reset coil are not powered simultaneously. Non-sealed type suitable for flow soldering. |
 |
S4197 ROHS
|
|
- Max Switching Voltage: 250V AC, 110V DC
- Max Switching Current: 16A
- Max VA (Watts): 1800VA (450W)
- Contact Material: Silver Selenium Dioxide
- Coil Resistance: 200Ω
- Max Coil Power: 720mw
- Insulation Resistance: >100MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 5000V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 10 million operations
- Dimensions: 13W x 29L x 21H mm
|
|
Fully sealed construction (immersion cleanable). |
 |
S0045 |
|
- Contact rating: 16A @ 240VAC
- Switch type: SPDT
- Operating voltage: 240VAC
|
|
24 hour 240V mains operated ON/OFF timer. ON periods are set manually with the 15 minute increment
tabs. Timer may be manually selected ON or OFF regardless of set time periods. Not suitable for use in direct sunlight. 6.3mm spade connections. |
 |
S0044 ROHS
|
|
- Rated voltage: 200-240V 50Hz 16A
- Quartz motor voltage: 24V 60Hz
- IP: 20
- Min setting time: 15min
- Program per day: 48 ON/OFF
- Dimensions: 60 x 60 x 35mm
- Weight: 75g
- Switch Life: >5000 times
- Rated functioning temperature: T55
|
|
24 hour 240V mains operated ON/OFF timer. ON periods are set manually with the 15 minute increment
tabs. Timer may be manually selected ON or OFF regardless of set time periods. Not suitable for use in direct sunlight. 6.3mm spade connections. |
 |
S0044A NEW
|
|
- Rated voltage: 200-240V 50Hz 16A
- Quartz motor voltage: 24V 60Hz
- IP: 20
- Min setting time: 15min
- Program per day: 48 ON/OFF
- Dimensions: 60 x 60 x 35mm
- Weight: 75g
- Switch Life: >5000 times
- Rated functioning temperature: T55
|
|
24 hour 240V mains operated ON/OFF timer. ON periods are set manually with the 15 minute increment
tabs. Timer may be manually selected ON or OFF regardless of set time periods. Not suitable for use in direct sunlight. 6.3mm spade connections. |
 |
S4199 ROHS
|
|
- Max Switching Voltage: 250V AC, 110V DC
- Max Switching Current: 16A
- Max VA (Watts): 1800VA (450W)
- Contact Material: Silver Selenium Dioxide
- Coil Resistance: 820Ω
- Max Coil Power: 720mw
- Insulation Resistance: >100MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 5000V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 10 million operations
- Dimensions: 13W x 29L x 21H mm
|
|
Fully sealed construction (immersion cleanable). |
 |
S5566 ROHS
|
|
- Hold Current: 100% load indefinitely
- Trip Current: Within 1 hr @ 135% load
- Within 1 minute @ 200% load
- Max. voltage: 250V AC or 32V DC
- Dimensions: 52L x 13.5H x 15.5W
- Note: All specifications at 25°C
|
|
16A circuit breaker.
Flush mount style.
Snap-in fitting with coloured button. |
 |
S2551 ROHS
|
|
|
|
8004 removable key .only |
 |
S5145 |
|
|
|
Similar to car courtesy light switches. Suits car alarms (for boot and bonnet) etc. Measurement listed is height above mounting surface.
Mounting hole 7.5mm. |
|
S2550 ROHS
|
|
|
|
Key removable in either position.
Blank Key To Suit (S 2550) |
|
S2554 |
|
- Key removable either position
|
COMING SOONThis item is arriving soon. |
This key switch and cam lock are available to OEM customers with a requirement for 003 key specification. This
model is only available in a minimum quantity of 25 pieces. Contact our parent company Altronic Distributors for competitive pricing on this it |
 |
S4150 ROHS
|
|
- Max Switching Voltage: 250V AC, 220V DC
- Max switching Current: 0.5A AC, 1A DC
- Max VA (Watts): 125VA (30W)
- Contact Material: Silver Palladium
- Coil Resistance: 960Ω
- Max Coil Power: 200mw
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1500V AC between open contacts
- 1500V AC between coil & contact
- Electrical Life: 200,000 operations 1A 24V
- Mechanical Life: 10 million operations
- Dimensions: ˜10W x 20L x 15.5H mm
|
|
Fully sealed construction (immersion cleanable). |
 |
S4113 ROHS
|
|
- Max Switching Voltage: 125V AC, 60V DC
- Max Switching Current: 1A DC
- Max VA (Watts): 62.5VA (30W)
- Contact Material: Gold Plated Silver
- Coil Resistance: 960Ω
- Max Coil Power: 150mw
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 400V AC between open contacts
- 1000V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 5 million operations
- Dimensions: ˜12.5W x 7.5L x 10H mm
|
|
Max voltage: 125V AC, 60V DC
Max current: 1A DC
Max VA (Watts): 62.5VA (30W)
Contact material: Gold Plated Silver
Coil resistance: 960&Omega
Max coil power: 150mw
Insulation resistance: >1000M&Omega @ 500V DC
Dielectric strength (for 1 min):
400V AC between open contacts
1000V AC between coil & contact
Electrical life: 100,000 op |
 |
S4152 ROHS
|
|
- Max Switching Voltage: 250V AC, 220V DC
- Max switching Current: 0.5A AC, 1A DC
- Max VA (Watts): 125VA (30W)
- Contact Material: Silver Palladium
- Coil Resistance: 2880Ω
- Max Coil Power: 200mw
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1500V AC between open contacts
- 1500V AC between coil & contact
- Electrical Life: 200,000 operations 1A 24V
- Mechanical Life: 10 million operations
- Dimensions: ˜10W x 20L x 15.5H mm
|
|
Fully sealed construction (immersion cleanable). |
 |
S4114 ROHS
|
|
- Max Switching Voltage: 125V AC, 60V DC
- Max Switching Current: 1A DC
- Max VA (Watts): 62.5VA (30W)
- Contact Material: Gold Plated Silver
- Coil Resistance: 3840Ω
- Max Coil Power: 150mw
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 400V AC between open contacts
- 1000V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 5 million operations
- Dimensions: ˜12.5W x 7.5L x 10H mm
|
|
Max voltage: 125V AC, 60V DC
Max current: 1A DC
Max VA (Watts): 62.5VA (30W)
Contact material: Gold Plated Silver
Coil resistance: 3840&Omega
Max coil power: 150mw
Insulation resistance: >1000M&Omega @ 500V DC
Dielectric strength (for 1 min):
400V AC between open contacts
1000V AC between coil & contact
Electrical life: 100,00 |
|
S4147 ROHS
|
|
- Max Switching Voltage: 250V AC, 220V DC
- Max switching Current: 0.5A AC, 1A DC
- Max VA (Watts): 125VA (30W)
- Contact Material: Silver Palladium
- Coil Resistance: 167Ω
- Max Coil Power: 200mw
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1500V AC between open contacts
- 1500V AC between coil & contact
- Electrical Life: 200,000 operations 1A 24V
- Mechanical Life: 10 million operations
- Dimensions: ˜10W x 20L x 15.5H mm
|
|
Fully sealed construction (immersion cleanable). |
 |
S4111 ROHS
|
|
- Max Switching Voltage: 125V AC, 60V DC
- Max Switching Current: 1A DC
- Max VA (Watts): 62.5VA (30W)
- Contact Material: Gold Plated Silver
- Coil Resistance: 166Ω
- Max Coil Power: 150mw
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 400V AC between open contacts
- 1000V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 5 million operations
- Dimensions: ˜12.5W x 7.5L x 10H mm
|
|
Max voltage: 125V AC, 60V DC
Max current: 1A DC
Max VA (Watts): 62.5VA (30W)
Contact material: Gold Plated Silver
Coil resistance: 166Ω
Max coil power: 150mw
Insulation resistance: >1000MΩ @ 500V DC
Dielectric strength (for 1 min |
|
S3022 ROHS
|
|
- Shaft Diameter: 6.35mm
- Shaft Length: 30mm
- Shaft Shape: Round with knob location flat
- Contact Timing: Break before make
- Contact Rating: 150mA @ 250V AC
- Contact Type: Silver Plated
- Max. Working Voltage: 300V
- Termination: 1.2 mm PCB Pins
|
|
User Selectable Configuration
Each switch includes a toothed washer with a mating series of sockets in the switch housing to enable the switch to be configured to your specific requirement. |
 |
S3008 ROHS
|
|
|
|
Rating: 16V DC, Max Operating Current: 10mA, Contact resistance: 50m max, Insulation Resistance: 100VDC 100M Ohm Min., Withstand Voltage: 100VAC 1minute, Operating Force: 400+/- 200gf/cm, Rotational Life: 10,000 Cycles, Resolution: 20 pulses/360° |
 |
S3035 ROHS
|
|
- Shaft Ø: 6.35mm
- Shaft Length: 30mm
- Shaft Shape: Round
- Contact Timing: Break before make
- Contact Rating: 125V AC/DC @350mA
- Termination: Solder Tag Terminals
|
|
Shaft Ø: 6.35mm
Shaft Length: 30mm
Shaft Shape: Round
Contact Timing: Break before make
Contact Rating: 125V AC/DC @350mA
Termination: Solder Tag Terminals |
 |
S2605 |
|
- Pole 1 makes to:
- Pos. 1 - 8, 1
- Pos. 2 - 1, 3
- Pole 2 makes to:
- Pos. 1 - 4, 5
- Pos. 2 - 5, 7
|
COMING SOONThis item is arriving soon. |
Panel hole 19mm, length 27.5mm from rear of front shroud, 33.6mm overall depth, 61mm depth with key inserted, including terminals. Overall diameter 22mm. Two keys supplied with each switch.
Rated 2A @ 250V AC.
|
 |
S2612 ROHS
|
|
- Pole 1 makes to:
- Pos. 1 - 8, 1
- Pos. 2 - 1, 3
- Pole 2 makes to:
- Pos. 1 - 4, 5
- Pos. 2 - 5, 7
|
COMING SOONThis item is arriving soon. |
This key switch and cam lock are available to OEM customers with a requirement for 003 key specification. This
model is only available in a minimum quantity of 25 pieces. Contact our parent company Altronic Distributors for competitive pricing on this i |
|
S2604 ROHS
|
|
- Pole 1 makes to:
- Pos. 1 - 8, 1
- Pos. 2 - 1, 3
- Pole 2 makes to:
- Pos. 1 - 4, 5
- Pos. 2 - 5, 7
|
|
Panel hole 19mm, length 27.5mm from rear of front shroud, 33.6mm overall depth, 61mm depth with key inserted, including terminals. Overall diameter 22mm. Two keys supplied with each switch.
Rated 2A @ 250V AC.
|
|
S2614 ROHS
|
|
- Pole 1 makes to:
- Pos. 1 - 8, 1
- Pos. 2 - 1, 3
- Pole 2 makes to:
- Pos. 1 - 4, 5
- Pos. 2 - 5, 7
|
|
Panel hole 19mm, length 27.5mm from rear of front shroud, 33.6mm overall depth, 61mm depth with key inserted, including terminals. Overall diameter 22mm. Two keys supplied with each switch.
Rated 2A @ 250V AC.
|
|
S2600 ROHS
|
|
- Pole 1 makes to:
- Pos. 1 - 8, 1
- Pos. 2 - 1, 3
- Pole 2 makes to:
- Pos. 1 - 4, 5
- Pos. 2 - 5, 7
|
|
Panel hole 19mm, length 27.5mm from rear of front shroud, 33.6mm overall depth, 61mm depth with key inserted, including terminals. Overall diameter 22mm. Two keys supplied with each switch.
Rated 2A @ 250V AC.
Key removable in left hand position only. |
|
S2603 |
|
- Pole 1 makes to:
- Pos. 1 - 8, 1
- Pos. 2 - 1, 2
- Pole 2 makes to:
- Pos. 1 - 4, 5
- Pos. 2 - 5, 6
|
|
Panel hole 19mm, length 27.5mm from rear of front shroud, 33.6mm overall depth, 61mm depth with key inserted, including terminals. Overall diameter 22mm. Two 606 keys supplied with each switch.
Rated 2A @ 250V AC.
Key removable in left hand position 1 onl |
|
S2601 |
|
- Pole 1 makes to:
- Pos. 1 - 8, 1
- Pos. 2 - 1, 2
- Pole 2 makes to:
- Pos. 1 - 4, 5
- Pos. 2 - 5, 6
|
|
Panel hole 19mm, length 27.5mm from rear of front shroud, 33.6mm overall depth, 61mm depth with key inserted, including terminals. Overall diameter 22mm. Two keys supplied with each switch.
Rated 2A @ 250V AC.
Key removable in left hand position 1 onl |
 |
S2521 ROHS
|
|
|
|
Mini. DPST. Radial type tumbler mechanism. Silver plated contacts and terminals. Supplied with two keys. Key removable in both positions. |
|
S2520 ROHS
|
|
|
|
Mini. DPST. Radial type tumbler mechanism. Silver plated contacts and terminals. Rated at 0.5A @ 240V AC. Key removable in both positions. Supplied with two keys. Overall depth with key inserted 49mm, including terminals. |
 |
S2515 ROHS
|
|
|
|
Standard. DPST. Radial type tumbler mechanism. Silver plated contacts and terminals. Rated at 2A @ 250V AC. Key removable in both positions. Supplied with two keys. Four terminals. Overall depth with key inserted 69mm, including terminals.
Blank Key |
 |
S2516 |
|
|
|
Standard. DPST. Radial type tumbler mechanism. Silver plated contacts and terminals. Rated at 2A @ 250V AC. Key removable in both positions. Supplied with two 10001 keys. Four terminals. Overall depth with key inserted 69mm, including terminals. |
 |
S2500 ROHS
|
|
|
|
Silver plated contacts and terminals. Rated at 3A @ 250V AC. Key removable in both positions. Supplied with two keys. Overall depth with key inserted 77mm, including terminals. |
