|
Description |
Downloads |
Specs |
Ordering |
|
 |
D4344 NEW
|
|
- Faster Connections: Wi-Fi 6 speeds up to 1,800 Mbps—1,201 Mbps on 5 GHz and 574 Mbps on 2.4 GHz.
- Connect More Devices: OFDMA and MU-MIMO technology quadruple capacity to enable simultaneous transmission to more devices.
- Boosted Seamless Coverage: Achieve seamless whole home coverage with a clearer and stronger whole home Wi-Fi signal generated by Wi-Fi 6.
- Ultra-Low Latency: Greater reduction in latency enables more responsive gaming and video chatting.
- One Unified Network: Multiple units form a whole-home network that auto-selects the best connection as you move around your home.
- Total Security: WPA3 encryption and TP-Link HomeShield provide personalized features, including Parental Controls, Antivirus, and Quality of Service (QoS) to ensure a safer online experience.
- Setup Made Easier Than Ever: The Deco app walks you through setup step-by-step.
|
|
Armed with Wi-Fi 6 technology, Deco X20 whole home mesh Wi-Fi is designed to deliver a huge boost in coverage, speed, and total capacity. Get on the latest mesh Wi-Fi to enjoy the future network that loads faster and connects more. |
 |
D5139 |
|
|
|
This 1RU panel is fitted with 24 RJ45 "back to back" coupler ports for tool free cable termination. Port numbers fields can be written on and fitted securely behind a clear lexan. Black finish. Includes rear cable support bar with earthing strap. |
 |
D4196 |
|
- All ports support Full/half duplex transfer mode for 10Mbps/100Mbps and Full duplex transfer mode for 1000Mbps
- Supports Auto-MDI/MDIX function
- Supports IEEE 802.3X flow control for full-duplex mode and back pressure flow control for half-duplex mode
- Store and forward Switching scheme
|
|
This high speed TP-Link 10/100/1000Mbps ethernet switch allows multiple computers to be connected together. Further computers may be added by daisy-chaining more switches together. Plugpack included. Rack mountable. |
 |
D5520 |
|
- Formatted capacity: 4 TB
- Form factor : 3.5-inch
- Advanced Format (AF): Yes
- RoHS compliant: Yes
- Performance
- Data transfer rate (max)
- -Buffer to host: 6 Gb/s
- Host to/from drive (sustained): 150MB/s
- Cache (MB): 64
- Rotational speed (RPM): 5400rpm
- Reliability/Data Integrity
- Load/unload cycles: 300,000
- Non-recoverable read errors per bits read: <1 in 10
14
- Limited warranty (years): 3
- Power Management
- Average power requirements (W)
- Read/Write: 5.1
- Idle: 4.5
- Standby and Sleep: 0.4
- Environmental Specifications
- Temperature (°C, on the base casting)
- Operating: 0 to 65
- Non-operating: -40 to 70
- Shock (Gs)
- Operating (2 ms, read/write): 30
- Operating (2 ms, read): 65
- Non-operating (2 ms): 250
- Acoustics (dBA)
- Idle: 25
- Seek (average): 26
- Physical Dimensions
- Height (in./mm, max): 1.028/26.1
- Length (in./mm, max): 5.787/147
- Width (in./mm, ± .01 in.): 4/101.6
- Weight (lb./kg, ± 10%): 1.5/0.68
|
|
Latest generation Western Digital 'WD purple' range of hard drives are optimised for the harsh demands of a modern HD multi-camera surveillance system where they will be running 24 hours a day 7 days a week.
|
 |
DE4213A |
|
- POE Port: 1 to 8 support IEEE802.3AF/AT Standard
- Output Power: 15.4W/30W IEEE802.3af/at
- Power Pin: Both 1/2+,3/6- and 4/5+7/8-
- Whole Power: ≤150W (52V 1.8A)
- POE Portocol: IEEE 802.3af/IEEE 802.3at
- POE Type: End-span
- Power Distance: ≤150m
- Network Standard: IEEE 802.3, IEEE802.3u,802.3x,802.3af/at
- Network Medium: 10/100BASE-TX:5 class and above non shielded twisted pair
- Data Distance: ≤150m
- Switch Capability: 1.6Gbps
- Forwarding Mode: Store and forward
- Forwarding Rate: 10BASE-T:14880PPS/port, 100BASE-tx:14800pps/port
- MAC Address: MAC address table 1K
- Port Function: Power priority mechanism, fast and forward, MAC automatic learning and aging, IEEE802.3X Full-duplex and mode and backpressure for Half-duplex mode
- LED Indicator: Each port occupied 1 LINK/ACT.100Mbps, POE Status Indicator, Whole power indicator
- Working Environment: Working temperature:-10°-- 55°C
- Weight: 1.7kg
- Size: 270mm*180mm*44mm(L*W*H)
|
|
Designed to deliver both power and ethernet connection to IEEE 802.3af compliant Powered Devices (PDs) such as IP cameras. Includes 8 PoE output ports, plus 2 link ports for connection back to the network video recorder. |
 |
D4213A |
|
- 8 10/100/1000Mbps RJ45 ports
- Equipped with 8 PoE+ ports to power 8 PoE devices at the same time
- Works with IEEE 802.3af or 802.3at compliant up to 30W per port device
- Innovative energy-efficient technology reduces power consumption
- Rack mountable with included rack mount bracket
- Total PoE power budget up to 126W
- Plug and play design, no configuration required
|
|
8-Port Gigabit Desktop Switch with 4-Port PoE provides the seamless network connection. It integrates 1000Mbps Gigabit Ethernet and 10/100Mbps Fast Ethernet network capabilities.
|
 |
S9270 |
|
|
|
These PoE transceiver units allow ethernet and power to be sent along coaxial cabling.
|
 |
D4320 |
|
- Superfast Wi-Fi – 300Mbps (2.4GHz) and 867Mbps (5GHz) speeds, are ideal for online gaming, HD streaming, and large file downloads
- Versatile Connectivity – With DSL, EWAN, and USB port, the Archer VR400 is fully compatible with the VDSL2/ADSL2+/ADSL2/ADSL standards, as well as fiber, cable and 3G/4G Internet services
- Superior Range – Three high gain antennas provide stable wireless connections and optimal coverage
- Beamforming Technology – Concentrates signal strength in the direction of your devices, delivering stable and highly efficient connections
- USB 2.0 Port – Supports storage and print service sharing, FTP and media servers as well as 3G/4G dongle
- Tether App – TP-LINK Tether provides the easiest way to access and manage the router on your iOS and Android devices
|
|
VDSL, ADSL2+ modem combined with the next generation of wireless routers utilising the 802.11ac standard providing up to 3 times the speed of 802.11n. Simultaneous dual band provides the ultimate performance for multi-user HD video streaming, gaming and more! |
 |
A3255 |
|
- Extends USB 2.0 range up to 50 meters at 480Mbit/s
- Transparent to USB hosts and devices, no driver is needed
- Support hot swap, plug and play
- Ideal for extending the reach of USB2.0 I/O devices such as cameras, display cards, network adapters, hard drives, flash drives, mp3 players, CD/DVD ROMs, printers and scanners, etc. between rooms
- ESD protection level to HBM ±4 kV （Contact Discharge）
- Standard wall plate outline, easy to install.
- Includes Power Supply
|
|
A point to point USB2.0 over UTP balun pair mounted into a wallplate for transmission of USB data between rooms. Installation is made easier via PoE, which only requires a single power source at either the receiver or transmitter end. |
 |
D4425 |
|
|
|
A compact bullbar mount antenna with spring base providing up to 6dBi gain for your Cel-Fi 4G system. Overall length: 68cm. 4m SMA connection cable. |
 |
D4340 |
|
- Superior Extended Range – Four fixed external antennas extend Wi-Fi coverage by up to 14,000 sq. ft.
- 4-Stream for AC2600 Dual Band Wi-Fi – Simultaneous 800Mbps on 2.4GHz + 1733Mbps on 5GHz
- 4×4 MU-MIMO – Simultaneously transfers data to multiple devices for 4x faster performance
- Beamforming Technology – Send targeted Wi-Fi signal to individual devices for stronger connections
- Gigabit Ethernet Port – Provide faster wired connections to smart TVs, computers and gaming consoles
- Intelligent Signal Light – Helps to determine the best location for optimal Wi-Fi coverage by indicating the signal strength in the current placement
- AP Mode – create a new Wi-Fi access point to enhance your wired network with Wi-Fi capability
- TP-LINK Tether App – Easily access and manage your network using any iOS or Android mobile device
- Ultimate Compatibility – Extend the range of any Wi-Fi router or wireless access point
|
|
Easy to use plug in high power dual band AC (2.4GHz/5.8GHz) wireless extenders for situations requiring increased bandwidth or distance. Operates as a relay station between your existing wireless AP or router & your Wi-Fi equipped device. |
 |
D4347 |
|
- Deco uses a system of units to achieve seamless whole-home Wi-Fi coverage — eliminate weak signal areas once and for all!
- With advanced Deco Mesh Technology, units work together to form one unified whole-home network with the same network name. Devices automatically switch between Decos as you move through your home for the fastest possible speeds.
- A Deco M5 two-pack delivers Wi-Fi to an area of up to 350 square metres. And if that’s not enough, simply add more Decos to the network anytime to increase coverage.
- Deco M5 provides fast and stable connections with speeds of up to 1267 Mbps and works with the major internet service provider (ISP) and modem.
- Deco can handle traffic from even the busiest of networks, providing lag-free connections for over 100 devices.
- TP-Link HomeCareTM provides a suite of personalized and secure features, including Parental Controls, built-in Antivirus and Quality of Service (QoS).
- Setup is easier than ever with the Deco app there to walk you through every step.
|
|
This Deco M5 Whole-Home Mesh Wi-Fi Router System is the ultimate whole-home Wi-Fi solution with comprehensive security and filtering. It delivers fast, uninterrupted Wi-Fi to every room, improving coverage, speed and reducing dead spots. Deco is also easy to set up and grows as you add devices to your home. Dual band AC1300. This system is a 2 pack |
|
D5518 |
|
- Formatted capacity: 3 TB
- Form factor : 3.5-inch
- Advanced Format (AF): Yes
- RoHS compliant: Yes
- Performance
- Data transfer rate (max)
- -Buffer to host: 6 Gb/s
- Host to/from drive (sustained): 145 MB/s
- Cache (MB): 64
- Rotational speed (RPM): IntelliPower
- Reliability/Data Integrity
- Load/unload cycles: 300,000
- Non-recoverable read errors per bits read: <1 in 1014
- Limited warranty (years): 3
- Power Management
- Average power requirements (W)
- Read/Write: 4.4
- Idle: 4.1
- Standby and Sleep: 0.4
- Environmental Specifications
- Temperature (°C, on the base casting)
- Operating: 0 to 65
- Non-operating: -40 to 70
- Shock (Gs)
- Operating (2 ms, read/write): 30
- Operating (2 ms, read): 65
- Non-operating (2 ms): 250
- Acoustics (dBA)
- Idle: 23
- Seek (average): 24
- Physical Dimensions
- Height (in./mm, max): 1.028/26.1
- Length (in./mm, max): 5.787/147
- Width (in./mm, ± .01 in.): 4/101.6
- Weight (lb./kg, ± 10%): 1.4/0.64
|
|
Latest generation Western Digital ''WD purple'' range of hard drives are optimised for the harsh demands of a modern HD multi-camera surveillance system where they will be running 24 hours a day 7 days a week.
|
 |
D4195 |
|
- All ports support Full/half duplex transfer mode for 10Mbps/100Mbps and Full duplex transfer mode for 1000Mbps
- Supports Auto-MDI/MDIX function
- Supports IEEE 802.3X flow control for full-duplex mode and back pressure flow control for half-duplex mode
- Store and forward Switching scheme
|
|
This high speed TP-Link 10/100/1000Mbps ethernet switch will allows up to 16 computers to be connected together. Further computers may be added by daisy-chaining more switches together. Plugpack included.
Rack mountable. |
 |
S9268 ROHS
|
|
- Connector Type: 1x BNC
- Cable Type: 75-ohm RG59, RG6, or RG11 video-grade coaxial cable
- Max. Transmission Distance: 600m (2000ft.) for the RG6 coaxial cable
- Ethernet Connector: 1x RJ-45 with LEDs on Connector
- Cable Type: Straight through or cross-over Cat5 Cable, Auto MDI/MDIX
- Rate: IEEE 802.3x, Auto-Detection for 10/100Base-T and full / half duplex
- Output Voltage: IEEE 802.3af/at PSE@ RJ45 Port
- LED Indicators: Coaxial Data Signal Strength, Green: GOOD (Link speed > 60Mbps) / Amber: MEDIUM (Link speed 20~60Mbps), Red: BAD (Link speed < 20Mbps) / Off: NO LINK
- Push Button: Reset / Pairing
- Input Operating Voltage: DC 56V / 0.03 - 1.6A
- Power Consumption: 1.5W (w/o power forwarding)
- Operation Temperature: -20°C ~ 60°C
- Humidity: 20% to 85% RH. (non-condensing)
- Storage Temperature: -30°C ~ 80°C
- Dimensions (W×D×H) mm: 38 x 120 x 33
- Weight: 176g
-
-
| Transmission Distance with Power Delivered: COAXIAL Cable |
-
-
-
Power Delivered
- & Power Source
|
-
Not using
- PoE output
|
-
| 5.5W |
-
| 7W |
-
| 9W |
-
| 12W |
-
| 17W |
-
-
-
| Maximum Coax RG6. Data Link Distance |
-
-
-
| DC56V Power Supplied |
-
| 2000m |
-
| 600m |
-
| 500m |
-
| 400m |
-
| 300m |
-
| 200m |
-
-
-
-
| Transmission Distance with Power Delivered: UTP Cable |
-
-
-
Power Delivered
- & Power Source
|
-
Not using
- PoE output
|
-
| 16W |
-
| 18W |
-
| 19.5W |
-
| 20W |
-
| 22W |
-
-
-
| Maximum Cat.5 (4-Pair) UTP Cable. Data Link Distance |
-
-
-
| DC56V Power Supplied |
-
| 600m |
-
| 600m |
-
| 500m |
-
| 400m |
-
| 300m |
-
| 200m |
-
|
|
A 10/100 ethernet over coax transceiver for sending ethernet only (no power) over
coaxial cabling. Two units are required to form a link. Alternatively, it can be used with S 9267 4 way splitter cable to four S 9268 transceivers. Requires 12V DC from either M 9273A or existing 12V supply using P 6715. Maximum coaxial length 2000m. |
 |
D2363A |
|
- USB C Power Delivery input (60W).
- Gigabit wired ethernet connection RJ45.
- 3 x USB 3.0 Type A connections.
- USB 3.0 Type C connection.
- Micro and full size SD card reader slots.
- VGA video output.
- DisplayPort 1.2 video output.
- HDMI output 4K @ 30Hz.
- 3.5mm microphone input and headphone output.
- Aluminium housing.
- 40cm USB C connection cable.
|
|
A handy USB C type laptop docking station hub with all the connections you need for working from home. A must have for anyone using their work laptop with a monitor at home or for families with a single desk for multiple laptops. |
 |
D4266 |
|
- Interface: 3 10/100Mbps LAN Ports, 1 10/100Mbps LAN/WAN Port, 1 SIM Card Slot
- Button: WPS/Reset Button, Wireless On/Off Button, Power On/Off Button
- External Power Supply: 9V/1A
- Dimensions ( W x D x H ): 202 x 141 x 33.6 mm
- Antenna Type: 2 Internal Wi-Fi Antennas, 2 Detachable External 4G LTE Antennas
- Compatibility: NBN - Fibre to the Premises (FTTP) - Wireless Router Mode. NBN - Fibre to the Home (FTTH) - Wireless Router Mode.
- Wireless Features
- Wireless Standards: IEEE 802.11b/g/n 2.4GHz
- Frequency: 2.4GHz
- Signal Rate: 300Mbps at 2.4GHz
- Reception Sensitivity: 11g 54M: -74dBm, 11n HT20: -71dBm, 11n HT40: -67dBm
- Transmit Power: CE: <20dBm(2.4GHz)
- Wireless Functions: Enable/Disable Wireless Radio, WDS Bridge, WMM, Wireless Statistics
- Wireless Security: 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK encryptions
- Network Type (V2):
- T4G: FDD-LTE B1/B3/B7/B8/B20 (2100/1800/2600/900/800MHz)
- TDD-LTE B38/B39/B40/B41 (2600/1900/2300/2500MHz)
- 3G: DC-HSPA+/HSPA+/HSPA/UMTS B1/B8 (2100/900MHz)
- 2G: EDGE/GPRS/GSM Quad Band (850/900/1800/1900MHz)
- Network Type
- 4G: FDD-LTE B1/B3/B7/B8/B20 (2100/1800/2600/900/800MHz)
- TDD-LTE B38/B40 (2600/2300MHz)
- 3G: DC-HSPA+/HSPA+/HSPA/UMTS B1/B8 (2100/900MHz)
- 2G: EDGE/GPRS/GSM Quad Band (850/900/1800/1900MHz)
- Software Features
- Quality of Service: Traffic Control(IP QoS)
- Operating Modes: 3G/4G Router, Wireless Router
- Management: Access Control, Local Management, Remote Management
- WAN Connection Type: Dynamic IP/Static IP/PPPoE/PPTP(Dual Access)/L2TP(Dual Access)
- DHCP: Server, Client, DHCP Client List, Address Reservation
- Port Forwarding: Virtual Server, Port Triggering, UPnP, DMZ
- Dynamic DNS: DynDns, NO-IP
- VPN Pass-Through: PPTP, L2TP, IPSec
- Access Control: Parental Control, Local Management Control, Host List, Access Schedule, Rule Management
- Firewall Security: DoS, SPI Firewall, IP Address Filter/Domain Filter, IP and MAC Address Binding
- Protocols: Supports IPv4 and IPv6
- Guest Network: 2.4GHz guest network x 1
- Box Contents
- 300Mbps Wireless N 4G LTE Router, TL-MR6400
- RJ45 Ethernet Cable
- Power Adapter
- Quick Installation Guide
|
|
Take full advantage of your cutting-edge 4G LTE network with the TL-MR6400, which can achieve download speeds of up to 150Mbps. The TL-MR6400 allows you to share your 4G LTE network with multiple Wi-Fi devices. |
 |
S9747 |
|
- Fast Dual-Band Wi-Fi: Simultaneous 450 Mbps on 2.4 GHz and 867 Mbps on 5 GHz totals 1317 Mbps Wi-Fi speeds.
- Integrated into Omada SDN: Zero-Touch Provisioning (ZTP), Centralised Cloud Management, and Intelligent Monitoring.
- Centralised Management: Cloud access and Omada app for ultra convenience and easy management.
- Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations.
- PoE Support: Support both standard 802.3af/at and Passive PoE (PoE adapter included) for flexible installations.
- Secure Guest Network: Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies.
- Advanced Wireless Tech: Optimize network performance with MU-MIMO, Band Steering, Airtime Fairness and Beamforming technologies.
|
|
As a long range indoor wireless device, the EAP225 is designed to provide a multiple connection and long distance wireless networking solution. It operates seamlessly in the 2.4GHz and 5GHz frequency spectra and provides wireless data transfer rates of up to 1200Mb |
 |
DA0333 |
|
- Class 10 speed rating allows you to shoot Full HD video and high quality photos
- Storage for your phone/camera/tablet to ensure you can carry on capturing every moment
- SanDisk® cards are compatible with Android smartphones and tablets
- Rated A1, the SanDisk Ultra® microSD™ card is optimised for apps, delivering faster app launch and performance that provides a better smartphone experience
- Blazing transfer speeds mean that your content moves fast letting you move up to 1200 photos in a minute
|
|
Improve the performance of your Android-powered and other smartphone or tablet with the SanDisk Ultra microSDHC or microSDXC** UHS-I Memory Card. The perfect choice for smartphone enthusiasts and tablet users. |
|
D5516A NEW
|
|
- Form Factor: 3.5"
- Cache: 256MB
- Capacity: 2TB
- Interface:SATA
- Product Description: WD Purple WD22PURZ - hard drive - 2 TB - SATA 6Gb/s
- Type: Hard drive - internal
- Data Transfer Rate: 600 MBps
- Buffer Size: 256 MB
- Features: Advanced Format technology, AllFrame, Conventional magnetic recording (CMR), support up to 64 cameras
- Dimensions (WxDxH): 101.6 mm x 147 mm x 26.1 mm
- Weight: 450 g
- Manufacturer Warranty: 3-year warranty
- Drive Transfer Rate: 600 MBps (external)
- Internal Data Rate: 175 MBps
- MTBF: 1,000,000 hours
- Non-Recoverable Errors: 1 per 10^14
- Load / Unload Cycles: 300,000
- Interfaces: 1 x SATA 6 Gb/s
- Compatible Bay: 3.5"
- Power Consumption: 3.8 Watt (read/write), 3.2 Watt (idle), 0.3 Watt (standby), 0.3 Watt (sleep)
- Compliant Standards: RoHS 2011/65/EU
- Min Operating Temperature: 0 °C
- Max Operating Temperature: 65 °C
- Min Storage Temperature: -40 °C
- Max Storage Temperature: 70 °C
- Shock Tolerance (operating): 30 g @ 2 ms
- Shock Tolerance (non-operating): 250 g @ 2 ms
|
|
Latest generation Western Digital 'WD purple' range of hard drives are optimised for the harsh demands of a modern HD multi-camera surveillance system where they will be running 24 hours a day 7 days a week. Model: WD22PURZ.
|
 |
S9269 ROHS
|
|
|
|
These PoE transceiver units allow ethernet
and power to be sent along coaxial cabling.
The 48-56V power supply (M 8976A)
can be added for powering a 802.3at
PoE device (such as an IP camera) at the
receiving end. A master transceiver and
camera transceiver are required to make
a link. Alternatively, a transceiver unit
may be used with the S |
 |
D4456 NEW
|
|
- Wide Frequency Band supporting all mobile carriers
- Low Insertion Loss
- Low VSWR
- High Isolation
- Widely used in IBS & DAS
|
|
The Blackhawk range of power splitters are ideal for connecting multiple devices to a single antenna. Ideal for M2M modems, mobile broadband routers, and USB modems with external antenna ports. |
 |
D4339 |
|
- RE500X comes equipped with the latest wireless technology, Wi-Fi 6, for faster speeds, greater capacity, and reduced network congestion.
- Creates a Mesh network by connecting to an OneMesh router for seamless whole-home coverage.
- Gigabit Ethernet Port – Provide faster-wired connections to smart TVs, computers and gaming consoles
- Intelligent Signal Light – Helps to determine the best location for optimal Wi-Fi coverage by indicating the signal strength in the current placement
- AP Mode – create a new Wi-Fi access point to enhance your wired network with Wi-Fi capability
- TP-LINK Tether App – Easily access and manage your network using any iOS or Android mobile device
- Ultimate Compatibility – Extend the range of any Wi-Fi router or wireless access point
|
|
The D4339 comes equipped with the latest wireless technology, Wi-Fi 6, for faster speeds, greater capacity, and reduced network congestion. |
 |
D4370A NEW
|
|
- Equipped with the latest wireless technology, Wi-Fi 6, for faster speeds, greater capacity and reduced network congestion.
- Next-Gen 1.5 Gbps Speeds
- Communicates more data to more devices using revolutionary OFDMA and MU-MIMO technology while simultaneously reducing lag.
- Triple-Core Processing ensures communications between your router and all connected devices are smooth and buffer-free.
- Achieve the strongest, most reliable WiFi coverage with Archer AX1500 as it focuses signal strength to your devices using Beamforming technology and four antennas.
- Increased Battery Life
- Easy Setup: Set up your router in minutes with the powerful TP-Link Tether App.
- Backward Compatible: Archer AX1500 supports all previous 802.11 standards and all WiFi devices.
|
|
This Archer AX1500 Wi-Fi 6 Router you can Wi-Fi 6 efficiently transmits data, enabling data packets for different applications to share one broadcast and cut the latency. |
 |
D4447 |
|
- Cable Type: LMR240 LSHF
- Length: 20 metres
- Connections: N Type Male, SMA Male
|
|
This 20 metre N type male to SMA male cable provides easy connection to antennas for 4G/5G booster systems in vehicles and fixed installations. |
