|
Description |
Downloads |
Specs |
Ordering |
|
 |
A3830B |
|
- Compliant with HDMI, HDCP 1.2 and DVI 1.0
- Supports HDMI audio sampling rate up to 192 kHz
- Supports Optical S/PDIF audio sampling rate up to 192 kHz
- HDMI supports high-bit-rate (HBR) audio
- No HDMI output connection is required to receive audio at the analog and optical outputs
- Supports 4 x 3.5mm phone jack for analog multi-channel audio outputs
- Maximum input and output HDMI cable length can run up to 15 meters at 1080p 8-bit resolution or 10 meters at 1080p 12-bit resolution
- Supports built-in audio EDID switching among LPCM 7.1CH, TV (external) EDID, and Bitstream audio
- Supports CEC bypass
- Supports 4Kx2K resolution and 3D signal
|
|
Allows you to split the audio stream from a HDMI signal into either S/PDIF optical or four analog stereo 3.5mm jack outputs - ideal for 7.1 multi-channel systems. |
 |
A3217D |
|
- Transmits up to 70m without signal loss
- One-way IR signal transmission
- HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
- Compact design for discrete and flexible installation
- Supports cascading via additional HDMI loop out
- Supports video resolution up to 4k2k@30Hz YUV 4:4:4
- Supports copying EDID from receiver display or loop out display
- Supports Power over Cable (from transmitter to receiver)
|
|
This extender can send HD video/audio signal and IR control up to 70m@1080p, and 40m@4K30 resolution via a single CAT5e/6 cable with zero-delay and uncompressed transmission. The HDMI loop output can be cascaded to the next extender, supporting resolution up to 4K@30Hz. |
 |
A3140 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This HDMI transmitter and receiver system can be used as a simple point to point extender or integrated into an existing home or business ethernet system enabling several receivers to be connected to one transmitter. |
 |
A3082 |
|
- RS-232 port for remote control.
- Video formats up to 4Kx2K@60Hz.
- Compliant with HDMI 2.0a, DVI 1.0.
- Digital and analog extracted audio output.
- HDCP 2.2 and HDCP 1.4 compliant.
- Support PCM, Dolby TrueHD, DTS-HD Master Audio up to 7.1CH.
- Switches 4 HDMI sources to a single HDMI output.
|
|
This compact 4-way HDMI switcher features manual & infra-red remote control for switching up to 4 sources to a single display supporting resolutions up to 4k 60Hz. |
 |
A3134E |
|
- Supports full 3D video format
- Displays an Ultra HD source on up to two Ultra HD displays
- Support high resolution up to 3840X2160@60Hz
- Supports four kinds of EDID handling abilities
- Supports HDCP2.2/1.4 Compliant
- Supports 36 bit deep colour
- Supports LPCM 7.1 Dolby True HD, Dolby Digital Plus and DTS-HD Master Audio
- Bandwidth 18G
- Supports HDR
- Supports online firmware upgrade via Micro USB Port
|
|
Allows the connection of a single HDMI source to multiple HDMI displays with no loss of quality. |
 |
A3112 |
|
- 1 input / 2 outputs.
- HDMI 2.0b, HDCP2.2/1.4 compliant.
- Maximum HDMI resolution up to 4K2K@50/60Hz (4:4:4).
- Supports digital & analog audio extraction from HDMI source.
- Supports output bypass and 4K to 1080P downscaling.
|
|
Designed to split a single HDMI source into four HDMI outputs. |
 |
P7357 |
|
- Convert complete VGA signal into HDMI output.
- Support the exchange between digital signal and analog signal.
- Support HDCP 1.0/1.1/1.2.
- Quick installation, simple operation without setting driver.
- Built-in conversion chip, support hot-swapping.
- VGA video input formats: 640x480, 720x576, 800x600, 1024x768,1280x720, 1280x768, 1280x960,1280x1024,1360x768, 1366x768, 1400x1050, 1440x900, 1600x900, 1600x1200, 1680x1050, 1920x1080.
- HDMI video output formats:480i, 480p, 576i, 576p, 720p, 1080i, 1080p.
|
|
Converts VGA signal to HDMI. Ideal for connecting VGA equipment to modern HDMI monitors & televisions. Supports virtual 7.1ch audio over HDMI or 3.5mm stereo output. |
 |
A3135F |
|
- Simultaneously displays an UItra Hi-Def source on up to four UItra HD displays
- Video Resolutions up to UItra HD 4Kx2K (3840x2160p)@60Hz YUV 4:4:4
- Three kinds of EDID handling abilities
- HDCP2.2/1.4 Compliant
- 36 bit Deep Color
- LPCM 7.1, Dolby TrueHD, Dolby digital Plus, and DTS-HD Master Audio
- Bandwidth 18Gbps
- Supports HDR
- Online firmware upgrade via Micro USB Port
|
|
This is a high performance 1x HDMI input to 4x HDMI output switcher which is powered via a USB port. |
 |
A3833 |
|
- Allows 4 AV sources to be connected - analog AV, VGA+3.5mm audio, mini DisplayPort, HDMI and USB-C.
- Converts all inputs to HDMI output 4K/2K @ 60Hz.
- Charge device via USB type A or USB type C ports.
- Ethernet by-pass function
- Source auto-detect plus manual switch selection
- Includes power supply.
|
|
Ideal for use in educational or boardroom environments, this handy converter table box provides connection for AV devices with VGA/3.5mm audio, USB-C, Mini DisplayPort and HDMI connections and outputs to a HDMI equipped projector or display. |
 |
P7354A |
|
|
|
This lead adaptor converts a HDMI signal to VGA and splits the audio signal to a 3.5mm stereo jack output. This allows high quality video signals to be transmitted over greater distances. |
 |
A3138A |
|
- HDCP 1.4 compliant
- Supports 6.75Gbps video bandwidth
- Video resolution is up to 1920x1200@60Hz YCbCr 4:4:4
- Extend distance up to 150m between encoder and decoder via Cat5e/6 cable
- Adopts Standard H.265 encoding/decoding
- Supports 1G standard IP switcher / router / hub
- Supports one-way IR control signal transmission
- Compact design for easy and flexible installation
|
|
HDMI Over IP Extender is based on AV over IP solution for distribution of one HD content to one HD display device or to multiple HD display devices over a standard 1G network switcher, and extends distance up to 150m between transmitter and receiver via a Cat5e/6 cable. |
 |
A3139A |
|
- HDCP 1.4 complaint
- Supports 6.75Gbps video bandwidth
- Video resolution is up to 1920x1200@60Hz YCbCr 4:4:4
- Extend distance up to 150m between encoder and decoder via Cat5e/6 cable
- Adopts Standard H.265 encoding/decoding
- Supports 1G standard IP switcher / router / hub
- Supports one-way IR control signal transmission
- Compact design for easy and flexible installation
|
|
HDMI Over IP Extender is based on AV over IP solution for distribution of one HD content to one HD display device or to multiple HD display devices over a standard 1G network switcher, and extends distance up to 150m between transmitter and receiver via a Cat5e/6 cable. |
 |
A3141 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This HDMI transmitter and receiver system can be used as a simple point to point extender or integrated into an existing home or business ethernet system enabling several receivers to be connected to one transmitter. |
 |
A3224 |
|
|
|
An ideal solution for pubs, clubs and venues, this HDMI extender system allows a single HDMI source to be shared across multiple screens located up to 30m away with Cat5e and 50m with Cat6. |
 |
A3218C |
|
- Compact design for easy and flexible installation
- HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant.
- Supports 18Gbps video bandwidth.
- Single Cat5e/6 cable transmission: 120m @ 4K2K, 150m @ 1080p.
- HDMI loop output on transmitter
- Analogue 3.5mm stereo output on receiver
- Bi-directional IR control (two targets and two emitters included)
- RS232 pass-through
- CEC pass-through
- HDR, HDR10+, Dolby Vision and HLG support
- Supports PoC (Power over Cable)
|
|
This 18Gbps HDMI Extender can extend high definition video / audio signal, RS-232, bi-directional IR, and the distance is up to 492ft / 150 meters between transmitter and receiver via a single CAT cable. |
 |
A3114 |
|
- 1 input / 4 outputs.
- HDMI 2.0b, HDCP2.2/HDCP1.4 compliant.
- Maximum HDMI resolution up to 4K2K@50/60Hz (4:4:4).
- Supports digital & analog audio extraction from HDMI source.
- Supports output bypass and 4K to 1080P downscaling.
|
|
Designed to split a single HDMI source into four HDMI outputs. |
 |
A3215A |
|
- 70m Range
- HDBaseT single UTP
- HDCP compliant
- Transmitter or receiver unit can be powered via PoE
- Supports uncompressed HDMI signal
- Supports 1080p @ 60Hz (75m)
- Supports 4K x 2K @ 60Hz 24bit (50m CAT5e) (60m CAT6)
- Supports 3D passthrough
- Supports LPCM, DTS digital, Dolby Digital, DTS-HD, Dolby True HD
- Supports 3D
- Supports HDbaseT technology
- Bi-direction IR control (wide band, 20-60KHz)
- Bi-direction delivery of power over cable
- Supports EDID call back
- Supports CEC pass through
- Built-in ESD protection system
|
|
Utilises the latest HDBaseT technology to send full HD uncompressed HDMI signals over Cat 5e/6 cable. |
 |
A3144 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This series of balun components has an important difference to most HDMI balun products on the market in that it can send HDMI signals over ethernet switches, allowing HDMI sources and displays to be connected in an expandable network. |
 |
A3124 |
|
|
|
A compact, single box solution for extending HDMI lead lengths. Simply plugs in line and boosts signal allowing lead lengths up to 25m. Ideal for situations where home theatre equipment is located remotely from the screen or projector. HDCP 2.2/1.4 compliant.
|
 |
A3242 |
|
- Extends HDMI signals over distances up to 60m at 4k@ 60Hz 4:4:4 resolutions.
- HDMI 2.0, HDCP 2.2 HDCP 1.4 and DVI 1.0 compliant
- Supports 18Gbps bandwidth
- Supports one HDMI loop output
- Supports one-way IR pass-through
- Supports HDR function
|
|
Designed to extend HDMI signals over distances up to 60m across economical UTP cabling. |
 |
A3443B |
|
- HDMI 2.0, HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
- HDMI 2.0, HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
- Four 18G HDMI 2.0 video outputs support up to 4K60 444 resolution
- Four outputs can be individually scaled for 4K - 1080p
- De-embedded audio to analog L/R and Coaxial ports output
- ARC audio return to the coaxial ports output only
- Built-in Web GUI for TCP/IP control
- Advanced EDID management supported
- Four methods of control: Front panel, RS-232, IR remote and TCP/IP
- Compact design for easy and flexible installation
|
|
This 4x4 HDMI 2.0 18Gbps Matrix Switcher can switch any of these 4 HDMI 2.0 Sources to four HDMI 2.0 Displays. |
 |
P7352A |
|
- Length: 15cm
- 4K maximum resolution @ 60Hz
- Connects between USB C devices and external displays
|
|
This HDMI output adaptor is the perfect accessory for any USB C equipped device to output video signals to an external monitor or display. This adaptor will display up to 4K resolutions at 60Hz. 15cm long.
|
 |
A3245 NEW
|
|
- Extend both HDMI signal plus USB peripherals.
- Transmission up to 70m over Cat6/6a UTP cabling.
- Ideal for remote operation of PC equipment.
- HDMI 2.0b, HDCP 2.2 compliant.
- 18Gbps video bandwidth.
- EDID management.
- Includes transmitter & receiver.
- Supports USB 1.1 KVM pass-through.
|
|
This product is designed to extend HDMI signals over distances up to 70m using Cat6/6a cabling. In addition it also allows USB peripherals to control a connected computer from the receiver end. |
 |
A3832 |
|
|
|
Ideal for use in educational or boardroom environments, this handy converter box provides connection for devices with VGA/3.5mm audio, USB-C, Mini DisplayPort and HDMI connections and outputs to a HDMI equipped projector or display. |
 |
A3145 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This series of balun components has an important difference to most HDMI balun products on the market in that it can send HDMI signals over ethernet switches, allowing HDMI sources and displays to be connected in an expandable network. It can also be used as a simple point to point extender. |
