|
Description |
Downloads |
Specs |
Ordering |
|
 |
A3109 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 40Gbps video bandwidth
- Supports video resolution up to 8K@60Hz 4:2:0 10bit, 8K@30Hz 4:4:4 10bit, 4K@120Hz 4:4:4 10bit
- VRR, FVA, ALLM supported
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- Support HDMI audio formats: LPCM, Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
- INPUTS 1 port and OUT 1 port support eARC/ARC function
- Allows HD audio up to Dolby Atmos, DTS:X over TrueHD from ANY external HDMI source to any eARC/ARC sound system
- Support audio de-embedding function (output through the optical and analog port)
- Built-in EDID DIP switch supports advanced EDID management
- 8K->4K, 8K/4K->2K downscaler support
- Support IR remote control and front panel button switching
- Built-in Equalizer, Retiming and Driver
- Compact design for easy and flexible installation
|
|
Allows four HDMI 8K V2.1 sources to be switched to two outputs/screens. This compact switcher brings together your HDMI sources for easy switching via front panel or IR remote control. |
 |
A3110 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripheralsÂ
- Transmission up to 150m over Cat6/6a UTP cablingÂ
- Ideal for remote operation of PC equipmentÂ
- HDCP 1.4 compliantÂ
- 6.75Gbps video bandwidthÂ
- H.265 encoding/decodingÂ
- Supports USB 1.1 KVM pass-throughÂ
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
 |
A3111 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripheralsÂ
- Transmission up to 150m over Cat6/6a UTP cablingÂ
- Ideal for remote operation of PC equipmentÂ
- HDCP 1.4 compliantÂ
- 6.75Gbps video bandwidthÂ
- H.265 encoding/decodingÂ
- Supports USB 1.1 KVM pass-throughÂ
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
 |
A3112 |
|
- 1 input / 2 outputs.
- HDMI 2.0b, HDCP2.2/1.4 compliant.
- Maximum HDMI resolution up to 4K2K@50/60Hz (4:4:4).
- Supports digital & analog audio extraction from HDMI source.
- Supports output bypass and 4K to 1080P downscaling.
|
|
Designed to split a single HDMI source into four HDMI outputs. |
 |
A3114 |
|
- 1 input / 4 outputs.
- HDMI 2.0b, HDCP2.2/HDCP1.4 compliant.
- Maximum HDMI resolution up to 4K2K@50/60Hz (4:4:4).
- Supports digital & analog audio extraction from HDMI source.
- Supports output bypass and 4K to 1080P downscaling.
|
|
Designed to split a single HDMI source into four HDMI outputs. |
 |
A3126 |
|
|
|
Accepts one stereo audio & composite or S-video signal and distributes it to four outputs. Suitable for domestic or commercial use in showrooms, pubs, clubs, cafes, TABs, etc. Gold RCA connections. |
 |
A3127 |
|
- Easy to Install in seconds, no fiddly settings.
- Full 3D and 4Kx2K resolution.
- 340MHz/3.4Gbps per channel (10.2Gbps all channel) bandwidth.
- 12bit per channel (36bit all channel) deep color.
- Compatible with uncompressed audio such as LPCM
- Compatible with compressed audio such as DTS Digital, Dolby Digital (including DTS-HD and Dolby True HD).
|
|
Allows the connection of a single HDMI source to two HDMI displays with no loss of signal quality. Suitable for home theatre, conference centres, sports bars, concerts, board rooms,etc. Multiple splitter units may be daisy chained together. |
 |
A3128A |
|
|
|
Allows the connection of a single HDMI source to two HDMI displays with no loss of signal quality. Uses include home theatre, conference centres, sports bars, concerts, board rooms,etc. Multiple splitter units may be daisy chained together. |
 |
A3133B |
|
|
|
A compact, single box solution for extending HDMI lead lengths. Simply plugs in line and boosts signal allowing lead lengths up to 50m. Ideal for situations where home theatre equipment is located remotely from the screen or projector.
|
 |
A3134E |
|
- Supports full 3D video format
- Displays an Ultra HD source on up to two Ultra HD displays
- Support high resolution up to 3840X2160@60Hz
- Supports four kinds of EDID handling abilities
- Supports HDCP2.2/1.4 Compliant
- Supports 36 bit deep colour
- Supports LPCM 7.1 Dolby True HD, Dolby Digital Plus and DTS-HD Master Audio
- Bandwidth 18G
- Supports HDR
- Supports online firmware upgrade via Micro USB Port
|
|
Allows the connection of a single HDMI source to multiple HDMI displays with no loss of quality. |
 |
A3135F |
|
- Simultaneously displays an UItra Hi-Def source on up to four UItra HD displays
- Video Resolutions up to UItra HD 4Kx2K (3840x2160p)@60Hz YUV 4:4:4
- Three kinds of EDID handling abilities
- HDCP2.2/1.4 Compliant
- 36 bit Deep Color
- LPCM 7.1, Dolby TrueHD, Dolby digital Plus, and DTS-HD Master Audio
- Bandwidth 18Gbps
- Supports HDR
- Online firmware upgrade via Micro USB Port
|
|
This is a high performance 1x HDMI input to 4x HDMI output switcher which is powered via a USB port. |
 |
A3136C |
|
- Simultaneously displays an UItra Hi-Def source on up to eight UItra HD displays
- Supports resolutions up to UItra HD 4Kx2K(3840x2160@60Hz YUV 4:4:4)
- Supports three kinds of EDID handling abilities.
- Supports HDCP2.2/1.4 Compliant
- Supports 36 bit Deep Color
- Supports LPCM 7.1, Dolby TrueHD, Dolby digital Plus, and DTS-HD Master Audio.
- Supports 3D
- Bandwidth 18G
- Supports HDR
- Supports online firmware upgrade via Micro USB Port
|
|
Allows the connection of multiple HDMI displays to a single HDMI source with no loss of signal quality. This splitter is ideally used for conference centres, sports bars, concerts, board rooms and other distributed AV applications where multiple displays are required. |
 |
A3136D NEW
|
|
- HDCP 2.2 compliant
- Supports 18Gbps bandwidth
- Supports resolution up to 4K@60Hz 4:4:4
- Supports HDR function
- Supports COPY/AUTO EDID control via dialling the DIP switch Â
- Compact design for easy and flexible installation
|
|
Allows the connection of multiple HDMI displays to a single HDMI source with no loss of signal quality. |
 |
A3138A |
|
- HDCP 1.4 compliant
- Supports 6.75Gbps video bandwidth
- Video resolution is up to 1920x1200@60Hz YCbCr 4:4:4
- Extend distance up to 150m between encoder and decoder via Cat5e/6 cable
- Adopts Standard H.265 encoding/decoding
- Supports 1G standard IP switcher / router / hub
- Supports one-way IR control signal transmission
- Compact design for easy and flexible installation
|
|
HDMI Over IP Extender is based on AV over IP solution for distribution of one HD content to one HD display device or to multiple HD display devices over a standard 1G network switcher, and extends distance up to 150m between transmitter and receiver via a Cat5e/6 cable. |
 |
A3139A |
|
- HDCP 1.4 complaint
- Supports 6.75Gbps video bandwidth
- Video resolution is up to 1920x1200@60Hz YCbCr 4:4:4
- Extend distance up to 150m between encoder and decoder via Cat5e/6 cable
- Adopts Standard H.265 encoding/decoding
- Supports 1G standard IP switcher / router / hub
- Supports one-way IR control signal transmission
- Compact design for easy and flexible installation
|
|
HDMI Over IP Extender is based on AV over IP solution for distribution of one HD content to one HD display device or to multiple HD display devices over a standard 1G network switcher, and extends distance up to 150m between transmitter and receiver via a Cat5e/6 cable. |
 |
A3140 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This HDMI transmitter and receiver system can be used as a simple point to point extender or integrated into an existing home or business ethernet system enabling several receivers to be connected to one transmitter. |
 |
A3141 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This HDMI transmitter and receiver system can be used as a simple point to point extender or integrated into an existing home or business ethernet system enabling several receivers to be connected to one transmitter. |
 |
A3144 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This series of balun components has an important difference to most HDMI balun products on the market in that it can send HDMI signals over ethernet switches, allowing HDMI sources and displays to be connected in an expandable network. |
 |
A3145 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This series of balun components has an important difference to most HDMI balun products on the market in that it can send HDMI signals over ethernet switches, allowing HDMI sources and displays to be connected in an expandable network. It can also be used as a simple point to point extender. |
 |
A3148 |
|
|
|
This HDMI over IP Extender uses advanced H.264 compression type which transfers signal using lower bandwidth thus transmit more smoothly. It supports 120m over single Cat5E/6 cable at point to point. |
 |
A3149 |
|
|
|
This HDMI over IP Extender uses advanced H.264 compression type which transfers signal using lower bandwidth thus transmit more smoothly. It supports 120m over single Cat5E/6 cable at point to point. |
 |
A3198A |
|
- Converter Type: Analog to Digital Converter
- Digital Output Type: Coaxial (RCA), Optical (Toslink)
- Digital Audio Output Format: LPCM (Linear Pulse Code Modulation)
- Input Impedance: 47K ohms
- Minimum Load Impedance: 75 ohms
- Input Voltage: 5V DC
|
|
Converts an analog audio output (from any standard line level source) into a digital audio signal for connection to a commercial amplifier or distribution system. Both coaxial and optical (Toslink) input connections are provided. |
 |
A3199A |
|
- For this device to work, the audio settings on a DVD / Blu-ray must be changed to output a lossless PCM digital signal to the coaxial and / or optical outputs. It will not work if another output format is used e.g. Dolby, DTS HD. Supports Digital Audio Format: LPCM (Linear Pulse Code Modulation). LPCM is part of the international standards for DVD, Blu-ray and HDMI. With any setting other than PCM, the signal error LED will light up. With audio output parameters set to PCM, the device will convert a digital 5.1 surround signal input to analogue stereo output from the device, and then into an A/V receiver amplifier or stereo system.
|
|
Converts a digital audio output (from a DVD player, set top box etc) into a standard stereo line level signal for connection to a stereo or commercial amplifier system. Both coaxial and optical (Toslink) input connections are provided. |
 |
A3205 |
|
|
|
Converts optical toslink audio input to a Coaxial SPDIF Digital audio output.
Requires 6 Volt dc input M 8916 plugpack with M9188 tip. |
 |
A3207 |
|
|
|
Supplied as a pair, these handy bi-directional audio extender allow you to send stereo audio signals over long distances using economical UTP cable (Cat5/5e/6). Ideal for connecting an audio source to an amplifier in another room. Maximum distance 75m. |
THIS PRODUCT CONTAINS A BUTTON BATTERY.